Settings of levels in 2015 CC

Similar Questions

• MUSE lost BC publication settings after update to 2015.2

  Hello

  After the upgrade to the 2015.2 Muse, he lost all the different BC settings I had for all my publishing sites.

  Is it possible to recover?

  I also noticed it says in the bottom of the window post "Associated site is not available for this user.

  see that screenshot

  I tried see if they where in the ' publish on ' pop down.

  Best regards

  Thomas Vedel

  

  We now have a KB doc with a workaround: Associated site is not available for this user similar to what is shown in the post above.

• How to set the raster effects with applescript settings in Illustrator CC 2015?

  Hello world

  I'm trying the effect of frame to some fixed value for all open documents in Illustrator via applescript in Illustrator CC 2015 set.

  but I can't get it to work.

  I'm trying to do as follows:

  say application "Adobe Illustrator".

    set the pixelation effect parameters of every document to {class:effects of rasterization options resolution: 1000}

  end say

  
  

  Strangely, it worked without any problem in Illustrator CC 2014.

  When I try to compile, it gives the error "an identifier cannot come after this identifier" (translation of the Dutch, so not 100% sure it's the correct terminology).

  Anyone have any idea how to get this working or do you think it is a bug in the latest version of Illustrator?

  Thank you very much for your help!

  Thomas

  CC 2015.0.1 Illustrator update seems to have fixed things for me

• Apple Watch does not appear in the security/privacy settings my mac (2015)

  Apple Watch does not appear in the security/privacy settings unlock my mac (2015) for auto

  Hi abcd_bruce,

  Thanks for stopping by Apple Support communities. I understand that you are eager to implement the feature Auto Unlock on your MacBook Pro. It is a new system and I'll be happy to help you with this.

  Looks like you did a few steps already to help lift this step. In this article, automatically unlock your Mac with your Apple Watch, he goes over all the steps that must be done to implement this place. If you already followed all these steps and are still problems, then the next step would be to start the Mac in safemode, and then check if you are able to see the Apple Watch see the implementation of the security and privacy preferences.

  Try safe mode if your Mac does not end commissioning

  Have a good night!

• 2015 InDesign CC fonts issue

  Similar to others on this thread, after upgrading from CC to CC 2015 2014 I can't select fonts in the menu in InDesign.

  Clearing preferences solves the problem, but I'll try to find another work around without erasing all my settings by default. I saved my preferences earlier and tried to drag the files of the individual as just my work space, color, and InDesign Defaults settings, but the "InDesign defaults" brings up the question.

  I'm trying to find a real solution in addition to simply remove all my preferences because I have a lot of settings customized for my best work flow. I would just continue working on CC 2014 but I'm working on a team of designers and that would be a pain to only be able to work outside their. IDMLs rather than. Files INDD once they are all level to 2015.

  Hello

  Sorry to see you facing problems with the latest version of InDesign.

  We understand why this problem is considered and have another workaround and then deleting preferences and caches.

  This issue is seen with the Menu mode of fonts "search first word only." Please use the 'Search font set name' mode to work around the problem so that solve us this problem.

  To change the mode click the search icon (magnifying glass) the box to change the menu font and choose 'Search entire font name' in the drop down menu

  

  We are sorry for the inconvenience caused.

  Concerning

  Javed

• files cannot be opened in bridge after indesign upgraded 2015

  Hello, set level to 2015 2014 version Ind. (windows 7 64-bit, 6 GB of ram, Intel Xenon 3550 W). First 2015 is extremely slow to commissioning.

  However, most annoying problem is that in trying to open the files in the Explorer or the bridge, I get a note this file extension is not recognized and/or related

  a program and does not open. However, I can open the file in indesign 2015. Save the file again in the 2015 version does not resolve the problem.

  Thanks for the help

  To solve the problem in Windows Explorer, you must change the file association in Windows for the extension .indd. Not being is not a Windows user, I leave it to others to explain

  However, the Bridge has its associations of files in Bridge preferences > file type Associations.

• How does the online Flash Player Settings Manager?

  That's one thing, I've always been curious to know: How does the Flash Player Settings Manager ?

  It's a UI SWF running in a regular reader of Flash, but there obviously access to all kinds of Flash Player settings low level, a typical SWF is not.

  My first guess is that the user interface is in fact built into Flash Player, but then why would you go to visit a website to see? The SWF file is actually be served by the site Web and Flash Player's trust to the Web site to access a low level player not made public API?

  As a Flash developer for many years I've just been curious about this for a long time. Now that the Manager is obsolete by the construction in the settings (which is a lot less mysterious) Manager, I thought I would ask before it is completely forgotten.

  -Aaron

  Yes, the SWF is imbued with special powers, which are linked to the domain that sovereign wealth funds are served from.  The settings are basically just special LSO.

• Wacom Intuos Touch with Photoshop CC 2015

  So after trying a lot, I'm a little frustrated. Since the installation of 2015 CC PS, I can't use the features of touch tablets more correctly. If I disable scrolling with scroll wheel and touch, everything works, except for zoom and rotation (which I believe doesn't work on Win 7 in any case). Because the tablets give commands like:

  Zoom	CTRL + wheel upwards

  I need to activate scrolling with mousewheel. So far so good. But that's starting to interfiering with:

  Vertical scrolling

  wheel

  Vertically the view gets impossible. Any idea on how to solve this problem? I'm confused cause it used to work on the 2014 version. I don't know if there are some wrong settings in my config.

  Welcome them

  Tazzmani

  PS: inputs of The Tablet comes from the development Site like: http://www.wacomeng.com/Windows/index.html

  Hi tazzmani,

  1. create a Notepad and type:

  # Use WinTab

  UseSystemStylus 0

  Save it as a text file named PSUserConfig.txt

  2. Open Run command and type appdata, and press ENTER key

  3. go to the location:

  Roaming - Adobe - Adobe Photoshop CC2015 - Adobe Photoshop CC2015 settings

  4. move the file PSUserConfig.txt to the folder settings Adobe Photoshop CC 2015

  Kind regards

  Tanuj

• Touch gesture "pan two finger ' Photoshop cc 2015.1 does not

  Hello

  I use a wacom cintiq 24hd button and after I installed (upgrade) the latest version of photoshop, cc 2015.1, (Windows 8.1) a couple of touch gestures don't work as they should:

  Two fingers to pan and zoom (when using two fingers to or far away, to zoom in or out) works perfectly.

  The two fingers pan does not work: whenever I use this gesture (goes up, down, left or right) I work the photo/painting on shoots off the screen. I have to select the the hand icon and use the stylus to place it in the center of my screen;

  The two fingers of pan and rotation does not work.

  
  

  I have not had a problem using all these movements in photoshop before the recent update.

  
  

  Is that what I can do on my part that could solve these problems? If someone could help me with this, I appreciate it a lot.

  
  

  Thank you
  

  JerHopp

  Hi JerHopp,

  Try the following steps:

  1. create a Notepad and type:

  # Use WinTab

  UseSystemStylus 0

  Save it as a text file named PSUserConfig.txt

  2. Open Run command and type appdata, and press ENTER key

  3. go to the location:

  Roaming - Adobe - Adobe Photoshop CC2015 - Adobe Photoshop CC2015 settings

  4. move the file PSUserConfig.txt to the folder settings Adobe Photoshop CC 2015

  Kind regards

  Tanuj

• No sensitivity to pressure with CC 2015 Photoshop and Wacom Intuos4

  Hi all

  So, I noticed something that had not occurred to me until I needed to use this feature. I've been using InDesign and Illustrator to my most recent work, so I didn't use a whole bunch of Photoshop since upgrading to 2015 CC. When you try to use the Brush tool, Photoshop does not meet with my Wacom Intuos4 Tablet pressure sensitivity. At the same time, my pen does not feather on gum time reverse commute around either. I don't have this problem when using my tablet in Illustrator, so I don't think anything about her trying to use Photoshop.

  I studied the issue and found that many others have had the same problem. But when you try to use the same solution (Windows of ink), I do not know if there is a "most recent" solution

  My specs:

  OPERATING SYSTEM:

  

  Photoshop:

  Adobe Photoshop Version: 2015.0.1 20150722.r.168 2015/07 / 22:23:59:59 CL 1032107 x 64

  Operating system: Windows 64-bit 8.1

  Wacom driver:

  

  Model: Intuos4 M

  Version: 1.04

  As I said, I guess that all the other solutions I found were made for previous versions of Windows and Photoshop, so I can't follow step by step with troubleshooting because I do not have the same "destination path", as when I try to save the PSUserConfig.txt file. So I hope that someone has found an update process.

  Thank you!

  Hi rexh7688,

  1. create a Notepad and type:

  # Use WinTab

  UseSystemStylus 0

  Save it as a text file named PSUserConfig.txt

  2. Open Run command and type appdata, and press ENTER key

  3. go to the location:

  Roaming - Adobe - Adobe Photoshop CC2015 - Adobe Photoshop CC2015 settings

  4. move the file PSUserConfig.txt to the folder settings Adobe Photoshop CC 2015

  Kind regards

  Tanuj

• New layer is white in PS CC 2015

  By clicking on the new layer, new layer is white and non-transparent, I have reset ps and it starts to do this again. Help, please

  Hi vanessa2009,

  Greetings.

  • Step 1: Shift-key while open PS and click Yes at the prompt and check PS now.
  • Try the steps mentioned below (Windows)
    • Press Windows + R at the same time
    • Type appdata, click
    • Navigate to the folder - Roaming\Adobe\Adobe Photoshop CC 2015
    • Move the settings Adobe Photoshop CC 2015 on desktop.
    • Launch PS and check again.
  • For Mac
    • Open finder
    • At the top, click on Go, go to the folder
    • Type ~/Library/Preferences
    • Find the folder settings Adobe Photoshop CC 2015 and move it to the desktop
    • Open PS and check now

  Concerning

  Rohit

• Saving the lightroom develop settings

  I have a question about registration of the development parameters in L ightroom CC 2015 once you remove a photo from the catalogue. My workflow is done in camera raw. Although I the have not used in the past I always thought that a . Xfile MP would save all adjustments of development keywords, flags etc. Now that I've tried it, I see that's not true.  I havet seems to save develop settings, but if you delete the photo, then re-import - it opens with the correct settings, but you cannot modify any of the final adjustments.  It also does not extract together with flags or color adjustments.

  Is there a way to do ? Normally, I like to keep my small catalog by removing pictures I do not wish to use it on a regular basis, but I can want to bring their return make some additional adjustments and then save them again once I was hoping that this economy and XMP file would allow me to do, but it doesn't appear to save the metadata not the setting of development parameters. Any help would be appreciated.

  Thank you

  cpgilles wrote:

  I have a question on registration of the develop settings in Lightroom CC 2015 once you remove a photo from the catalogue. My workflow is done in camera raw. Although I the have not used in the past I always thought that one. XMP file would save all the settings development, keywords, flags etc. Now that I've tried it, I see that's not true.  It seems to save develop settings, but if you delete the photo, then re-import - it opens with the correct settings, but you cannot modify any of the final adjustments.  It also does not extract together with flags or color adjustments.

  Is there a way to do this? Normally, I like to keep my small catalog by removing pictures I do not wish to use it on a regular basis, but I can want to bring their return make some additional adjustments and then save them again once I was hoping that this economy and XMP file would allow me to do, but it doesn't appear to save the metadata not the setting of development parameters. Any help would be appreciated.

  I think you'll find (or you've already found) that Lightroom was not designed to be used in this way. Since you say that "any help would be appreciated", my Council, similar to the above, is to use Lightroom as it was expected, and you won't have these problems. The Act of deleting the photos is what you lose information and simply creates extra work for you. Don't not deleting photos is less work and ensures that you do not lose this information. The idea of keeping the small catalogues manages also against the idea behind the design of Lightroom... you want Lightroom to be the tool by which you can find all of your photos and you browse all your photos. There is no advantage to smaller catalogues and no disadvantage for large catalogs, when used correctly.

• PS CC 2015 - save for Web Gif "unknown error."

  I made a rather large animated gif and need help to export in a gif file.

  I tried CC 2014 with no luck and updated level to 2015 with the hope it would work. Nope. I pushed too hard on the capabilities of the PS? Is there something weird about programming?  You have all the tips and tricks? Something will help you!

  

  

  Export as that will only save the first image.  SFW is the approach that you need.

  Try changing the frame rate to 12 fps and reduce the size of the first image.  For my Gallery I target usually 800 px to 400 px as a maximum width (or height for the vertical animations).

• E-mail office 365 CF10 settings cause mail reviewed

  Hello, can someone help me with the Cold Fusion admin settings to allow messages to be sent using Office 365?

  Thank you

  Renee

  Renee,

  I am able to run my application of intrusion via cfmail via office365 with below settings(server level) perfectly: -.

  -

  Mail Server - smtp.office365.com

  Username - [email protected]

  Pwd - UserPassword

  Port - 587

  Enable TLS connection to mail server - activated

  -

  Please try with these settings there.

  Kind regards

  Kaif

• Problem setting up star with noise + levels to the hi res

  It's something that I've never met... I tried all sorts of methods of fixing the problem, but nothing helped.
  
  First of all, I see a 24 "x 36", 150 DPI displays. There is a part of the poster where I want to create the illusion of space and stars. Easy enough, just to make a new layer, fill it with black, add a levels adjustment layer, adjust the black and white sliders and voila, stars...
  
  I took a 12.5% zoom screenshot: http://i234.photobucket.com/albums/e...eenshot6-1.png
  It looks exactly how I like my poster to watch.
  
  BUT, when all zooms in further, more noise starts to become visible for some reason any...
  
  Here are some examples:
  
  16.7%: http://i234.photobucket.com/albums/e...eenshot9-1.png
  
  33%: http://i234.photobucket.com/albums/e...enshot10-1.png
  
  66.7%: http://i234.photobucket.com/albums/e...enshot11-2.png
  
  and finally, 100%: http://i234.photobucket.com/albums/e...enshot12-1.png
  
  They are all with the same levels, you mind. Everything I do is zoom in a little each time.
  
  As you can see, none of these looks a lot like the interpretation of 12.5%, I linked at the beginning. It is mind-boggling to me. Am I missing something?
  
  Basically, my technique to create the stars deploys a new layer, filling black, add some noise (amount: 110%, Distribution: Gaussian, monochrome: checked), new levels adjustment layer, adjust the black and white sliders... and that's all.
  
  Specification of your computer, just in case:
  MacBook Pro (Intel)
  Adobe CS4 Master Collection (Photoshop CS4 specifically in this case.)
  
  Sorry for the long post, it's sort of difficult to describe without being in front of someone. Thanks in advance for any help or advice you may have.

  The blur of the image by using a Blur Gaussian after creating noise, but before adjusting levels.

  If you preview your image at 100% view while you perform your settings of levels, you will see how, nothing is really happening. It is a glitch preview which lets you think that levels affect the image. If the blur of the image, you should see the levels settings actually affect anything other than the preview.