Recovery of the license, is not box, does not register the product

Similar Questions

• Problems of software download Norton antivirus after the recovery of the product

  Recently, I used the product recovery disc to restore my computer to its original state. I then logged on Norton to reinstall my anti-virus but I get the following message:

  A PROBLEM OCCURRED WHICH NEEDS YOUR ATTENTION

  This product is not compatible with the operating system of computers you. You must have one of the following systems.

  Microsoft Windows Vista (32 bit & 64 bit) don't pack 1 or later starter/Home Basic/Home premium/professional/ultimate

  I got this version of Norton running before you run the product recovery.
  Any help on this would be highly appreciated.

  Owen.

  Hello Owen

  As far as I know Toshiba use trial versions that you can use for three months. After this time, you must purchase a license or remove the preinstalled version of the system.

  If your decision is to use Norton, I think that all questions related to Norton must be clarified with their support.
  Have you already contacted support Norton?

• Satellite P100-188: how to perform the procedure for recovery of the product?

  Hello

  I just had a bit of trouble to install a piece of software that, in the end I could settle with a system restore. This process was worried at the time that I could not get the software uninstalled properly (I had to download a program from the machine to uninstall!)

  At one point, I considered the restoration of my laptop Satellite P100-188 with the product recovery disc, the thing is I never did this before and I was wondering if someone could tell me the best sequence for later use.

  I have a standard Windows Media Center Edition OS, a recovery disk of the product, a disk Express Media Player and a CD of Drivers and tools that I created when I got the laptop.

  I have a feeling telling to restore Express Media Player before Windows, is does that mean that I have to insert this disc, install Express Media Player, then insert recovery disk product to install Windows?

  The Express Media Player disc formats the drive? It's not clear to me and I don't want to run into problems when I finally don't have to reinstall my operating system.

  I searched this forum to see if this information was already posted and could not find all the relevant information, all I can find are problems with the help of recovery and lack of discs discs.

  If it has been posted before could you provide me a link and I'm sorry again calls for data.

  Hello Gary

  If you want to have own OS preinstalled, the best solution is to use supplied recovery media. If the Express media player works well the leave it as it is and use the recovery DVDs only for clean operating system installation. All that s!

  Tools and Utilities CD can be used if you need to reinstall Toshiba designed tools or if you want to install your own operating system by using the facilities of Microsoft CD. If you have any other questions please post again.

• cloud license are not in my products

  Hello

  I have purchased a license of the Adobe Creative Software Cloud

  in the Adobe site

  I paid and got a receipt

  but it is not in my products

  What to do

  Does anyone have a solution

  Thanks for the information.

  I checked the order number and the order is processed completely and the subscription is active under your Adobe ID

  Please refer to the help documents below to download the application Adobe CC:

  Creative cloud to desktop

  Download, install, update or uninstall applications

• Satellite A200 - cannot use Vista after the recovery of the product

  Hello. I hope someone can help me with the following... This week I had various issues with which follows my laptop a Vista update that system restore did not fix, so I decided to go for a full recovery of product (which I have a complete backup of all my files).

  So far I have used the product recovery on my laptop in the 3 ways I can see (and more than once): without changing the settings, change the settings and maximize the partition, change settings and select advance / expertise.

  Whenever I was able to complete the initialization of windows, create a new user account, etc. Once the Office has been set up, I get a small window with a progress bar and when it's over, I click on the button 'restart '...

  After the reboot, I get the black screen that says Microsoft Corporation with the green progress bar, but he's there for what feels like 'too long '. After a while, I get a black screen with a cursor, then a blue screen for a crash dump.

  If I use F8 and boot mode safe, the system stops the CplIR.sys file, although the hard disk activity seems to be continuing. I turn off after 10 minutes.

  If I use F8 and then select Repair computer... This is what is happening with each option
  -Restore the full windows operating system: after clicking on OK nothing happens.
  -Diagnostics of memory: there is no problem with memory
  -DOS prompt: I run CHKDSK and there is no problem with the hard drive
  -Restart: there is no errors, even if the word diagnosis 'impossible' when he sees, there is no system restore points

  Then on reboot I get the black screen with cursor followed by the crashdump OR if I managed to log in and access my desktop, I get the crash dump, as soon as I try to do something (like open Control Panel).

  Following the instructions found elsewhere, I have tried this after removing the battery, then changing power management options immediately after the initialization of windows (ie. before clicking on the restart button). No change.

  I even ignored the button restart! But still get a crash dump, when I try to do something.

  Any ideas? I've got past (ie. wasted) so a lot of time on this and don't understand what may be wrong after formatting the windows drive image and reloading...

  Hello

  It's very interesting story. I got several notebooks several times but I never noticed anything like that.
  I must say that what you did right and you think appropriately. If I were you I would try exactly the same steps to make it work somehow.
  I do not know which issues you had before, but I imagine that here it's just the problems of software and not important for the operation of the equipment.

  It's really hard to say what can be the problem. What you can try, is somewhere to get facilities Microsoft Vista disk and install naked Vista to see if the same thing will happen again.
  Anyway, the fact is that images of recovery are tested and adapted for each laptop model and if the material is OK there no reason for this kind of behavior.

  Try again with the new installation using Microsoft facilities drive and let us know exactly what is happening.

• Recovery of the product for Satellite S2450-101 disk

  I lost my recovery disc for my Satellite 2450-101 and cannot order from the address of the site backupmedia because he's too old. How can I get it please?

  Hello

  I think EPA should be able to help you.
  As far as I know Windows XP Home recovery CD Toshiba already contains the Win XP SP1 and so it should be possible to order.
  So contact the ASP guy in your country and try to buy it from them.

  By the way; You can also install a clean Win XP and then all drivers Toshiba which are released into the Toshiba page. You should find the drivers in the field of ARCHIVES.

  Concerning

• Vista does not recognize the product key

  I reinstalled Vista using the disc of recovery of the product due to unrecoverable corruption. Once installed Vista indicates that the OS is not authentic and that she invites you for an alternative. I also entered the product key from the sticker on the bottom of the lappy, but also not recognized as valid. I'm puzzled.

  Satellite pro L300.

  Any help would be greatly appreciated.

  Pete.

  > I reinstalled Vista using the product recovery disc...
  Did you create this disk using the preinstalled Toshiba recovery disc creator?
  > I reinstalled Vista using the product recovery disc...
  Did you create this disk using the preinstalled Toshiba recovery disc creator?

  Installed recovery image must not be activated, so I really don't understand how you may be asked for product key.

• Copy the datafiles/redo logs from the Production Server to QA Server

  I need to update the QA database on server QA with the Production database on the Production Server. I intend to copy logs files from data/recovery of the Production database to replace the QA database datafiles/recovery logs. Should I stop the Production database before you start copying? If this is not the case, what happens if a Production database data file has been copied to QA and then this Production obtained data file updated before other newspapers of data/recovery files have all been copied to QA?
  
  Thanks for any help.

  881656 wrote:
  Should I stop the Production database before you start copying? If this is not the case, what happens if a Production database data file has been copied to QA and then this Production obtained data file updated before other newspapers of data/recovery files have all been copied to QA?

  If you use this technique without closing the database, copied datafile/recovery logs will be incompatible.

  You can use the RMAN utility to take backup of the production database and restore it on server QA.

  If the database size is small (about 10-20 gb) you can use EXPDP/IMPDB.

• Reinstall Windows 7 - laptop does not come with a disc or I do not have the recovery partition, all I have is the product key

  Hello

  I am running windows 7 Professional on my laptop. I need to know how to format and re install the operating system. My laptop does not come with a disc or I do not have the recovery partition, all I have is the product key. I would also like to know the pilots.

  Kind regards

  Aty.

  Former title: reinstalling Windows 7

  Well, your only option is to get the Windows 7 Home Premium disc by following the instructions that I described in the following article:

  How to: What are my options for Windows 7 reinstall media?

  Then follow the instructions to retrieve reinstall them:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

  But before you do, make sure that you get the Windows 7 Professional product key if you need to reapply in the future:

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)

  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features

• URL address box does not display the current page.

  With the 4.0.1 update, the URL address box does not display the current page.

  All that shows is the text: «Go to web site»

  To now see the url of the current page, you need to make a right click the empty space is the address box and press the button "esc".

  Is there a way to display the url of the current page?

  This problem may be caused by an extension that is not working properly.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• When I press email and attach the photo, my email 'box' does not appear as formerly, and still on the bottom of the screen it says "1 selected item."

  When I press email and attach the photo, my email 'box' does not appear as formerly, and still on the bottom of the screen it says "1 selected item."   And I also waited for a period of time as well very reasonable.  What can I do?

  original title: EMAILING A PHOTO OF "LIBRARIES/IMAGES".

  Hi BrianS.OR,

  1 are you referring to the client program webmail or email?

  2. what e-mail on the computer client program do you use? Is - this Windows Mail or Windows Live Mail?

  3. What size are the image files?

  4. did you of recent changes on the system?

  You can temporarily disable a security software and firewall installed on the system and check if the problem persists.

  Note: Be sure to enable the security software on the computer after checking.

  Hope this information is useful.

• When I connect my camera (panasonic TZ5) to my PC. the AutoPlay dialog box does not appear. Help

  When I connect my camera (Panasonic TZ5) to my PC. The AutoPlay dialog box does not appear. Help please

  Hello

  · What is the operating system installed on the computer?

  · Were there any changes made on the computer before the show?

  You can access the link below which holds information on the problems of auto play: http://windows.microsoft.com/en-US/windows7/Troubleshoot-AutoPlay-problems

• My problem is that when I try to save an image from Adobe Photoshop by using the 'save for Web' half of the dialog box does not appear.

  I use a Vista Home Premiuim Windows in an Acer Aspire One 10.1 "." My problem is that when I try to save an image from Adobe Photoshop by using the 'save for Web' half of the dialog box does not appear. Can someone help me please?

  Here is a screenshot of my problem...
  [IMG] http://i55.tinypic.com/of5w01.png [line]
  Help me please.

  Hello

  1. were you able to see the front dialog box?

  2. did you of recent changes to the computer?

  This happens because your screen resolution is less than the required minimum of 1024 x 768.

  You can try to change the resolution of the monitor and check.

  For more information, see the link:

  Change settings display on multiple monitors

  Change the screen resolution

  You can also refer to Adobe support links and also post your request in the Forum from Adobe for assistance:

  http://forums.Adobe.com/thread/433020?TSTART=0

  http://kb2.Adobe.com/CPS/403/kb403268.html

  http://forums.Adobe.com/community/Photoshop/photoshop_windows

  Hope this information is useful.

• AutoPlay dialog box does not appear just by connecting the device to the computer

  Original title dialog box Auto Play

  I want to download pictures from my camera and the AutoPlay dialog box does.  I did the same way for many years.  What has changed?

  Hi MarthaRamsay,

  ·         Did you do changes on the computer before the show?

  ·         You are able to see that the device is windows Explorer?

  There are several reasons for this problem. AutoPlay might be restricted by group policy, it could be canceled by a program that is running, or the service that AutoPlay needs to start might not run.

  Follow these methods.

  Method 1: Follow these steps:

  (a) click Start, click principally made programs, on Accessories, right click invite, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) at the command prompt, type net start shellhwdetection, and then press enter.

  (c) restart the computer.

  Method 2: Follow the steps in the article.

  How can I get pictures from my camera to my computer?

  Troubleshoot camera connection

  For reference: AutoPlay problems

• Serial number on the box does not have 12 items

  Tried to re - install the 12 items after I upgraded to windows 10 - all the numers in the back of the box does not work - how to move forward

  Serial numbers are not ON the box where anyone in a store can see and fly

  Lost serial number http://helpx.adobe.com/x-productkb/global/find-serial-number.html