Recurring corrupted files in Vista 64

Similar Questions

• How to restore corrupted files windows vista system (audiosvc, audioendpointbuilder)

  My audio service seems to be corrupted.  When I start in safe mode and stop the sound service, then restart works fine.  When I turn on the audio service then the computer crashes immediately.

  How can I locate audio files windows vista 64 and re-install them.

  Hello

  Make sure you have the latest audio drivers for vista for your computer which you can get your site of card manufacturers sound or computer

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Unable to start boot corrupted files Windows Vista Home premium

  Hello all recently I got my hands on an old Toshiba laptop Satellite I'm supposed to have attachment to a friend, however, she doesn't remember the password for the laptop so I searched for ways to circumvent the password and delete it however, I ran into a major problem, according to the wiki site , how you put in a family of Windows Vista installation disc premium, you select your country and all that say before you install is a repair of your computer, but I can't so I thought well maybe if I hit install that it will recognize that there are already Windows Vista on the computer however to my dismay that it did not so I canceled the installation but now the computer does not even boot into Vista at all he'll just do Startup Repair whenever whenever it starts "Windows loading files" I already tried several things the bootrec command using command prompt without success, I tried to restore the master boot record by using the command-line without success either, here are the details as seen from the Startup Repair tool: signature of the problem GREATER TOMBENT AUTO there is also one that says corrupt boot configuration data and who says fix partition table I look it up online that I mean who is the code which is the ID of locale 1033 I looked up the exact problem this forum and he said if there is the disconnect a USB connected the problem with that is there is no USB device connected. To clarify what I said earlier about wiki, how what I tried to do initially was put in the trunk of installation disk from the CD in the environment of the installation, then click on repair your computer so that I could use CMD to reset the password online, I have seen that you can change the keys to self-retaining pull up of CMD by modifying the ease of access button but I thought that it would be easier because I don't have to understand how to fix the ease of access button after I did. So now I am at a loss as to what I could do next to important things to note that this computer doesn't have system restore points stored on it so it is not an option if you do not understand something please let me know and thank you for your suggestions. PS I will try a disk check, now that I think of it.

  Hello all I was able to restore the computer back in working order without password, I did however have download and burn a copy of Vista Home premium at my discretion. But I use the product key legally reactivate Windows Vista Home premium but I have to say that the search for the driver for this laptop has not been easy, especially the pilot Wi - Fi that I had to go

  burn it to a disk, and then install the software in this way. I really don't know not how I got the display driver correct because I downloaded the driver two booster and then the next minute it was display driver just because I checked on the user manual on Toshiba.com and it was the correct an Intel 3000 graphics thank you all so much for your help and I hope this helps someone else :-)

• Corrupt file - Windows Vista

  My laptop HP G7015EA with Windows Vista will not start not, and the system recovery or Recovery Manager works. I have not either the recovery discs.

  I get the following error messge:

  Probsig1 - Autofailover

  Probsig2 - 6.0.6000.16386

  Probsig3 - 6

  Probsig4 - 196611

  Probsig5 - Corrupfile

  Probsig6 - Corrupfile

  Probsig 7-0

  Probsig 8-3

  Probsig 9 - WrpRepair

  Probsig 10-10

  Version of the OS - 6.0.6000.2.0.0.256.1

  Local - 0

  Can someone help me - can I fix it, or is it a restful job!

  When you say Recovery Manager does not work, I guess you try touch F11 immediately after power? This error message does it give you?

  If Recovery Manager fails and you did not have your value recovery disk, contact HP to order one HERE

• Satellite L350: Vista doesn't work anymore - LogonUI.exe - corrupted file

  Security Suite updates on my daughters Toshiba Satellite L350 windows vista the operating system no longer works.
  An error was detected on the system that contains the following message.

  Open a session about UI.exe - corrupted file
  File or directory C/Program ~ 1 / Toshiba/Smart face V is corrupt & unreadable.

  I tried to run a system restore to the last configuration on both computers, but always the same problem exists. I also tried to restore the two laptops to the factory settings, but the system still does not work. I don't have a restore disk as disk Toshiba HARD drive recovery is on the laptop.

  Can someone help me or suggest any way I can fix it both of these laptops. It seems very strange that both of these computers have stopped working at the same time according to windows automatic updates in October 09.

  Thank you Gary

  Hello

  AFAIK the LogonUI.exe is responsible for connecting to the Windows operating system.
  If the exe file is corrupt then you won't be able to connect to the operating system.

  You don t the recovery disk but you have the HARD drive on the second partition recovery this may be your last resort.

  Switch on and press F8. Choose fix my computer.
  Then new window appears offering the option called: HARD drive recovery.

  Choose this option and see if you can start the HDD recovery procedure.

• Vista found scannow it cannot fix corrupted files

  I have an old computer... Vista 64 bit SP2 which has some issues and when I used SFC/scannow...it find corrupted files, it cannot repair.  I don't have a disc with the image of origin... and I tried to use the dism command... .but this old computer does not respond to this command.

  So do I have other options to try to solve my problem?  I have so many things on this computer, I wouldn't lose it and it's on MS office... which is not compatible, I said, with my new laptop with Windows 10

  Thank you

  SFC scan & fix windows OS files/folders to a certain extent... SFC finished, it takes

  to allow repairs, to do this, once the Sfc is thru, type: CHKDSK C: /F agree to restart, type: EXIT

  Restart the pc. At the start of the pc to the top, the CHKDSK runs automatically, it ends then Sfc repairs... In addition, the cmd is Sfc/scannow

• sfc/scannow foud the corrupted files after upgrade from Vista Home Premium 32 bit

  Hello

  It is an event that I went through:

  (1) recently I received a bunch of updates to Vista Home Premium 32 bit, after I did the update I decided to perform sfc/scannow task and this is the error message I got the "Windows Resource Protection found corrupt files and managed to fix them." Details are provided in the CBS.log windir\logs\CBS.log newspaper. For example c:\windows\logs\CBS\CBS.log

  Repair of system files change will take effect after the next reboot.

  (2) so I did restart and then try to run the sfc/scannow task once again, but I still got the same message I described in step 1 again. So basically sfc/scannow function did not repair the corrupted files.

  (3) the next step, I decided to perform a repair Installation of visa which took me 10 hours to complete the task, once the task of upgrading of repair has been made and before the windows update, I ran sfc/scannow task and this time he finds any corrupted files, but after I updated windows sfc/scannow result was the same as step 1.

  It is obvious to me that one of the updates of the origin of this problem, but find it me hard to pinpoint that one. So I am writing this e-mail to help and I hope that the problem will soon be solved. Please let me know if you need me to submit the CBS.log file for you to review thanks in advance.

  Kind regards

  Jdec9

  Hello

  Sorry to hear that you are facing a problem due to the update of Windows. I'll certainly do my best and get the issue resolved.

  I suggest you to view update history to see which update might be causing the problem.

  (a) open Windows Update by clicking Start , all programs, and then Windows Update.

  (b) in the left pane, click view update history.

  (c) to display more information about an update, double-click it.

  Once you know Update KB number, provide us with the same for later analysis. You can also try the steps in the article and see if it helps.

  You can also download the files of cbs to Skydrive.

  Use SkyDrive download collected files and post screen shot/image

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Acer Aspire laptop with Vista Home Basic Edition does not, System Restore does not, sfc, find corrupt files but do not repair. Need help!

  Hi, I have an Acer laptop Aspire with Vista Home Basic Edition that came pre-installed, so no records only the disk hard drive partition.

  I turned on my laptop today and it starts but the loading bar of stalls at the black screen with "(c) Microsoft Corporation" and dragging green. The slide bar will continue to drag, but nothing else happens which means that I understand even as much as the login screen. I rebooted and tried Windows recovery, but the only remedy to what he suggests is a restoration of the system, which does not have any point, I try to restore it.

  To remedy this, I have connected in safe mode and ran the SFC command prompt. It scans my system and told to find corrupted files, but he can't heal some. This is where my knowledge limit runs out. I don't know how to fix the files that the SFC cannot. (Also I created a journal using the findstr command prompt and checked but it say anywhere that it was unable to fix it so I'm not even sure how to identify corrupted files)

  As it's an Acer laptop, Aspire I'll try their eRecovery tool to return my computer to factory settings, but it won't work in safe mode, and as I said I can not connect normally. I tried alt and F10 at the initial boot screen when I turn on, it loads the windows files and shows the Acer "Please wait a moment" screen and then nothing happens again.

  I can't afford to get it fixed, and there is no chance I can get a new laptop. Any ideas/help? Thank you.

  Hello

  You have t in Normal Mode to resolve problems by using upgrade repair facility that is SFC

  Read this topic eRecovery Acer.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  See you soon.

• Vista - SystemPropertiesProtection.exe - corrupted file

  Vista - service Pack2
  When I go to create a restore point, the "SystemPropertiesProtection.exe - corrupt file" message. However, I can still create a restore point.
  Attempted solutions were...
  1. I have run chkdsk & warned that the "disc is clean.
  2 - I run sfc/scannow and found no errors.
  3 - I created a new user profile & receive the same message in this new profile.
  4 restored my most old restore point.
  Is it possible to replace just C:\Windows\System32\SystemPropertiesProtection.exe
  All files of execution around him with names beginning with SystemProperties seem to run with no error message.

  Hello
   
  Have you made changes on the computer before this problem?
   

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: before you perform security analysis, make a backup of important data.
   
  Check the event viewer for the error message detailed and after return of information.
   
  Open event viewer : http://windows.microsoft.com/en-US/windows-vista/Open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• I have windows vista and my scan reads memory corrupted files and nothing seems to work

  I have windows vista and my bed scan memory files are damaged. Last week your beople helped me with a problem of viruseshad infected also a Trojan horse which has blown on my windows essentials, I had at the time I had to move to AVASTfirewall and defender but he still reads memory corrupted files what I wear what we can do.  * E-mail address is removed from the privacy *

  Hi Larry-664,

  ·         You try to retrieve files or is it just an error of analysis?

  ·         What is the full error message?

  ·         When you see this error message?

  ·         What analysis do you use?

  ·         You have some problems to access the files, or if you find missing files?

  Give the link to the thread in which you received the virus removal help.

  Follow the steps to run the Windows memory diagnostic tool.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

• VISTA Home Basic w/SP 2 or corrupted files. "Home-made" recovery disc can remedy?

  I ran SFC/scannow and discovered the corrupted files that Windows could not repair.  I have a recovery disc I made a few months ago... If this can fix the files?  If so, how?

  Thanks for any advice / help!

  Normally, the recovery disks will be only a recovery to factory settings; as to how it was when you bought it.

  See if you can borrow a Vista DVD from Microsoft.

  You perform an installation upgrade repair from inside a Vista operating system:

  Read this tutorial on how to do a repair installation:

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

  Mick Murphy - Microsoft partner

• Works with Windows Vista SP2, constant freezing, jumped through all the hoops and now it seems to be corrupted files after that I ran the sfc.scannow.

  Computer stops responding especially if I have more than 1 page open. Cursor problems, Outlook 2007 running super slow and not very responsive, ran the repair for this tool. Ran Ccleaner, checking virus, Malware, Spybot, clean disk, defragmentation, do a startup repair, chkdsk, and then the tool of sfc.  32-bit Windows system, Dell Inspiron running Windows Vista SP2 with an AMD Athlon X 2 processor.

  2009-12-27 17:39:41, Info CSI 000000 d 1 [SR] cannot repair the military record [l:22 {11}] "c:\windows\system32\dllcache\icardie.dll" Microsoft-Windows-IE-Infocard, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2009-12-27 17:40, Info CSI 000000 d 3 [SR] cannot repair the military record [l:22 {11}] "c:\windows\system32\dllcache\icardie.dll" Microsoft-Windows-IE-Infocard, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  ' 2009-12-27 17:40, CSI Info 000000 d 4 [SR] this element is referenced by [l:216{108}]"Microsoft-Windows-InternetExplorer-8-RTM-Update~31bf3856ad364e35~x86~~8.0.6001.18702.Internet-Explorer-8-x86. '
  2009-12-27 17:40, Info CSI 000000 d 7 [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:22{11}]"icardie.dll '; source file in the store is also corrupted
  2009-12-27 17:56:34, Info CSI 00000196 [SR] cannot repair the military record [l:22 {11}] "c:\windows\system32\dllcache\icardie.dll" Microsoft-Windows-IE-Infocard, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2009-12-27 17:56:34, Info CSI 00000198 [SR] cannot repair the military record [l:22 {11}] "c:\windows\system32\dllcache\icardie.dll" Microsoft-Windows-IE-Infocard, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2009-12-27 17:56:34, Info CSI 00000199 [SR] this element is referenced by [l:216{108}]"Microsoft-Windows-InternetExplorer-8-RTM-Update~31bf3856ad364e35~x86~~8.0.6001.18702.Internet-Explorer-8-x86. '
  2009-12-27 17:56:34, CSI Info 0000019 c [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:22{11}]"icardie.dll '; source file in the store is also corrupted

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  ------------------------------------------------------------

  Part of the problem is probably SpyBot which can greatly affect the peformance IE and Vista/Windows 7.

  Start - type in the search box-> find Services at top - click right on - RUN AS ADMIN

  Double-click Service SBSD and change it to MANUAL and STOP

  Then run SpyBot and in settings uncheck TeaTimer - close and restart.

  Now you can run SpyBot as a scanner at the request.

  ------------------------------------------------------------

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  =================================

  If you still have performance problems:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• corrupted files run sfc/scannow, but findstr cannot find details or file on windows 7pro sp.1 upgraded from vista ultimate

  corrupted files run sfc/scannow but findstr cannot find details or file on windows 7pro sp.1 upgraded from vista ultimate cd rw Dvd Player also stopped working cannot download Mr fixit on internet explore 11.

  A possible answer to your dilemma related to the results of the SFC is on this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/SFC-cannot-fix-corrupted-files-in-Windows-7/f798f377-126C-47ff-Bb16-ef5e0dddb5be

• Someone knows how to fix a corrupted file mib.cab? 2350 error code? The result of the installation failed for Mindstorms NXT 2.0 on computer vista laptop, service pack 2.

  Tried to install the Lego NXT 2.0 software (programming robotics), a message "file 'mib.cab' required for this installation is corrupt and cannot be used.  A message gives the error code 2350.  Someone knows how to fix a corrupted file mib.cab?

  Try in the Forum of programs:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon.

  Mick Murphy - Microsoft partner

• Problem of corrupted files

  I have a question. I have an error message that comes up constantly as corrupted file VProtector:vprot.exe.  It lists the name of the corrupted file and suggests that the utility Chkdsk trun. I don't know how to do it. I rebooted and the chkdsk countdown begins, but when it gets to zero, no option of chkdsk wouldn't come. It starts just as usual, and the error message keeps coming up.  Can someone help me please? UGH! Thank you

  Hello

  You use software AVG?  Perform a repair of the software

  1. Go to Start -> (settings)-> Control Panel.
  2. Open (programs)-> programs and features, or Add or remove programs.
  3. In the list of programs, select AVG 2013 .
  4. Click the change or Change/Remove button.
  5. Select repair.
  6. Follow the instructions on the screen to complete the installation.
  7. Restart your computer.

  To run chkdsk

  Click Start > type CMD

  Right click on CMD and select run as administrator (Windows Vista, 7 & 8)

  Type chkdsk/r

  Press enter

  You will receive a message about the volume must be locked.  Press y and press enter

  Type Exit to close the CMD window

  Restart your computer to chkdsk starting

  The analysis will take some time and when finished will restart Windows.  You can find the results in Event Viewer > application log

  Search Winninit