How to connect a Dell's VGA screen to my Mac Pro with cinema display 27 inches

Similar Questions

• How do I get the normal home screen on the Mac Pro?

  I upgraded the graphics card in my 2008 Mac Pro, which has also bootcamp, but now when I want to switch it to Mac OS X I have graphics cards, boot in OS X with my OS X disk selected, restart and then it will stay, instead of being able to hold down the option key pressed during boot to get the drive selector. Is there a file I can change so that I get the Apple boot screen and the drive selector?

  Sounds like replacing the graphics card is a regular PC and not a Mac-Flash card. Only one Mac-Flash card will show a splash screen and allow the use of the Option, special recovery and other startups.

  Some mac-flashed it maps to select the PC or Mac equipped with a switch mode

  Do you have what graphics card installed?

• How can I enable the GPU option on a new mac pro with 2 AMD D700 graphics cards?

  I recently bought the new mac pro, and I saw the option GPU is not activate and acknowledges that the CPU one, which is frustrating. Does anyone know how to enable the GPU option?

  Thank you

  See this for more details about how the GPU is used in After Effects:

  http://blogs.Adobe.com/AfterEffects/2012/05/GPU-CUDA-OpenGL-features-in-after-effects-CS6. HTML

  Note that your card will be used for all the features of GPU - but the 3D rendering acceleration traced the beam - requires a Nvidia GPU. This is a deprecated feature that you don't need to worry about anyway. There are a lot of better alternatives to the use of 3D in After Effects, Cinema 4 d, including the who now comes with After Effects:

  fects.html http://blogs.adobe.com/AfterEffects/2013/04/details-of-Cinema-4D-Integration-with-after-EF

• How to coordinate the my music on my book of mac pro with my iPhone?

  I subscribe to Apple music on my OS X, but cannot get it on my iPhone. What should I do?

  What iPhone do you have and which version of iOS? It takes a minimum of 8.4 for music to Apple iOS.

• How to choose the display by default when you use two screens on my Mac Pro?

  How to choose the display by default when you use two screens on my Mac Pro?

  The default view when you have several is made that you drag the little icon in the menu bar in this pane:

  

  .

• How to unlock my book mac pro with my watch i

  How to unlock my book mac pro with my watch i

  The watch must be update shows OS 3, and MacBook to macOS Sierra.  Then go on the MacBook in settings-> Security & privacy-> and select "Allow Apple Watch unlock your mac".

• I am trying to connect a Macbook Pro with Retina display for a new monitor Dell Ultrasharp 3014. I tried to connect via HDMI and DVI cable supplied with the monitor but the monitor says "no cable dvi - d".

  How to connect a Macbook Pro with the (just bought) Retina display for a Dell Ultrasharp U3014's new? I tried to connect with HDMI and DVI cable supplied with the monitor but the monitor says "no dvi - d" cable. I never tried to do that before so I'm lost.

  Use a mini-displayport cable. Connect to one of the ports Thunderbolt the MacBook Pro to ultra-compact monitor entry.

• Mac pro with monitor Dell P2414H book: how to rotate the image displayed in mode portrait when I rotate the monitor 90 degrees

  I have a mac book pro retina bought in 2014 which I use with a Dell P2414H monitor.

  I bought this monitor because it can turn up to the vertical position ('portrait'), but when I do that the image of the screen does not turn with it.

  I called Dell and they said that it is a problem to solve with Apple.

  Does anyone else have this problem? and it got fixed?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• How to connect Labview to PLC Modicon Quantum (140 CPU 311 10) with Modbus

  I was wondering if someone could give some tips on how to connect Labview to Modicon Quantum plc (the card is 140 CPU 10 311).  I am eager to serve a Labview HMI to control the controller that is used to implement the control PID with a VFD.  Currently I can communicate via Modbus to the API for programming using UnityPro XL, but I have no idea how to connect Labview.  I read the article on place OR "connect Labview to any PLC via Modbus", but I don't know yet.  Any help will be greatly appreciated.

  Hey Greener.

  Communicate with the PLC via Modbus usually requires the Datalogging and Supervisory Control (DSC) Module to have this feature available in LabVIEW. The white paper which indicated you using this module, which may explain why you can't get the communication at work. If this is something you don't have, and purchasing a license is not an option, then you might be able to use Modbus unofficial libraries to get the functionality you need. I have included a link below to a Modbus for LabVIEW library that you can try.

  DSC module:

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/209851

  Modbus Library:

  http://www.NI.com/example/29756/en/

  Kind regards

  Ryan

• How much if I want to change a screen for my Mac Pro?

  There is a scratch on the screen

  Without knowing what model of MacBook Pro

  Make an appointment at an Apple store Genius Bar.

  Shop Apple Store - Genius Bar

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• How to fix or get data off Mac Pro with display/restart issues

  Hi, my early 2008 Mac Pro running El Capitan suddenly started to show lines all over the screen, then it restarted, displaying an error message and since then he's been stuck in a reboot loop never get past the progress bar and with very distorted display. Two questions:

  (1) any solution to this? It is an old machine, worked great so I would like to continue using it if possible, but do not want to put money in it at this stage.

  (2) what is the best way to get data out of the two internal drives to the machine on my Mac Air? I need to access the files on it, also like his 2 x 1 TB hard drives I will not be able to transfer the data on Air, but you will need to use them as external drives.

  Help appreciated!

  Get a dock like this

  http://www.felinediabetes.com/FDMB/forums/feline-health-the-main-forum.28/

  and take the readers on the Mac Pro and put them in the dock and connect to new mac via USB

  You can also get an enclosure that accept disks 3 1/2 in.

  In addition, you can get a bolt of lightning > FireWire adopter and connect the two Macs via FireWire and start the old mac in target disk mode

  How to use and troubleshoot disk mode target FireWire - Apple Support

  The error message say? Problem could be the graphics card bad or maybe bad memory.

  If you open the side cover are all diagnostic lights on?

• How to properly plug (3) 4 k monitors on my mac pro?

  I have ASUS (2) 4 k work monitors and a Samsung 48 "4 k monitor TV/Client UHD to go with my end of 2013 Mac Pro w / AMD over-pants D700 6144 MB graphics card upgrade.  According to the website of Apple AND Mac Melrose (I bought from the dealer) easily, you should be able to run (3) 4 k monitors - this, however, is NOT the case.  When I simply followed the instructions from apple won't even read the system a 3rd monitor - not even a 1080-even following the instructions DO NOT connect on the same bus.  The only ways that I could get a 3rd screen if even displays are making it work with an active Mini DisplayPort to Dual-Link DVI (Thunderbolt simultaneous usb AND connectors), which requires also a HDMI to DVI first, and then the resolution is only 1080.   The only other way that I could get a 3rd monitor seem even is by work through airplay - obviously the latency and loss of quality through this method is not ideal either.

  I was on the phone with Apple AND Mac Melrose Tech technicians, and nobody has any idea.  Y at - there someone here who can help me with this problem please?

  Your Mac can run six monitors at once, if they are all Mini DisplayPort.

  Other interfaces are referred to as "Legacy", and it can only lead to more than TWO of those without having to use ASSETS converters who have re-drivers of signal in them.

  You can not "stack" adapters.

  To debug, reduce to two screens and you'll usually be able to get every one.

• Mac Pro is not displayed after the passage of the screens

  OK, so this is a strange problem but it's very annoying (at least for me). I just bought a LG Ultrawide 29 "display and connected via a HDMI cable to my Mac Pro (Home machine) and a second HDMI cable to my Macbook Pro (desktop computer). The Mac pro / Macbook pro good work with the big screen, HOWEVER, when I use my Mac pro and select the tilt of the screen to switch to the HDMI 2 connection, it works and rocking on my Macbook pro. But when I try to switch it back to HDMI 1 (Mac Pro), it comes back with a black screen and says no signal. Even if I plug the HDMI cable it does not work. I set the timer to 3 hours sleep, doesn't always help. I know he's not missing sleep because itunes can be played when I spend and still playing music throughout and continued when I try to switch back. The only way I could get is long, press the button on my Mac Pro and restart.

  The only reasonable difference that I know is that the Macbook pro is running Yosemites, while my Mac Pro running Beta El Capitan. I have a feeling, this is probably the cause, but I just wanted to know if someone has solved this problem somehow.

  Thank you

  Hello Hemlock70,

  Thank you for using communities of Apple Support.

  I understand that your external screen remains completely black, with a message no signal, during the passage of the views.  For assistance with this problem, please go through the steps in the link provided below.

  Get help with graphical problems on external displays connected to your Mac.

  Take care.

• How can I add a previously installed windows on my mac pro installation

  Hi guys, everything becomes to collect my newly bought mac pro 3.1 (used). I'm moving PC, but how do I add my existing installation of windows on my mac? The mac pro is 3.1 and has 2 x 500 GB disks in a raid 1 TB configuration. It's just a matter of plugging my windows disk (I'm guessing No.) or is it a bit more complex than that? Any help or advice will be appreciated and hope to give back as much help as I get that I'm learning. Thank you

  You can install Windows on a Mac computer using Boot Camp Assistant or by using a Parallels, Fusion, or VirtualBox virtual machine natively. Refer to the instructions of Boot Camp located here: http://www.apple.com/support/bootcamp/. OT If using a virtual machine see the instructions located on the Parallels, Fusion or VirtualBox sites.

  In both cases you can not use a PC already existing installation of Windows. You need to reinstall Windows on your Mac.

• Impossible to share the internet connection on the mac pro with the 5s iPhone book

  Hi, I use Internet on my mac pro book using ethernet

  I try to connect to internet on my iPhone 5 s using internet sharing. When I try to connect my iPhone using wifi it shows that there is an authentication failure

  Please help me solve the problem

  Thanks in advance

  Hi Hima8,

  If you are unable to get your iPhone to connect to a network Wi - Fi, the article below the link Details a number of troubleshooting steps that may help restore his ability to do.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network
  https://support.Apple.com/en-us/HT204051

  All my best.