Red and blue spots

Similar Questions

• The red and blue of the defragmentation of observation tool areas?

  Can someone tell me if it is possible to display the red and blue areas after the defragmentation tool analysis please? All I see is a message saying that you do or you don't need to defragment, but cannot see the graphical representation, as you can do in XP.

  Thanx.

  Can someone tell me if it is possible to display the red and blue areas after the defragmentation tool analysis please? All I see is a message saying that you do or you don't need to defragment, but cannot see the graphical representation, as you can do in XP.

  Thanx.

  Vista Defrag is supposed to do its work quietly in the background. You don't even have to or should have to run defragmentation manually. Leave him alone and let him do his work.

  If you must, try the Auslogics Disk Defrag. It's free:
  You can watch the little squares blue, red, yellow, green, moving at lightning speed. You will also have a report at the end.
  http://www.Auslogics.com/en/software/disk-defrag/

  t-4-2

• the images show black with red and blue sections on importation

  Newly installed 5 Lightroom on new computer (HP ZBook with 4 k screen).  When the files are imported from SD card on the display main and previews images are mostly black with some red and blue areas.  I tried disabling autotone and indicators of clipping and tried disabling GPU and the changing screen resolution - nothing helped.  I can see histogram and use the sliders to change the picture a bit, but can "lead to normal. The same images of this SD card are fine in Lightroom on my old computer.

  What can I do to fix this?

  Thanks, Paul

  This looks like a bad monitor profile. You must re - calibrate your monitor. If you do not have a calibrator, go to the properties of your monitor (it looks like the right of windows) and remove any profile associated with the parser. That do Windows will take your monitor is sRGB. This should solve the immediate problem, but it is always recommended that you calibrate your monitor with hardware calibration.

• My cat was walking on my keyboard Middle edit in Lightroom and now all my photos when opened to develop are bright red and blue areas clear and hidden pictures. I can't turn off. HHHEEELLLPPPPPP!

  I don't know how in the world it happened. other than the instant my cat went through my keyboard that everything went to hell in a hand basket. I can't edit the photos because I can't see beyond the bright red and blues. They have normal air in the catalog.

  Click on the triangles of the histogram, the turn on and off the red and blue of break that you see.

  

• Help! distortion of red and blue in the areas of light and shadow of my photos? Only develop tab...

  I am changing a stream of photos from yesterday and everything was going good edition yesterday and this morning, but now this afternoon, this blue distortion appeared in the Red distortion shadow areas into zones and clear. If I export the photo, it disappears, but it's very distracting, even if I'm in the tab to develop suggestions?

  Hi congillespie,

  The red and blue puts in light that you see are the clipping, you can turn it off by pressing the 'J '.

  Kind regards

  Tanuj

• Help! Lightroom 2.5 red and blue lines.

  Hello everyone, Reacently I upgraded from 1.x to 2.6 and now my previews show a kind of red and blue lines around highlights, which bothers me not at all, the big problem is that these lines appears in the prints from lightroom. And that's not all these line also appears in the exported to photoshop.

  My files raw directly addressed (in PhotoshopCS3) shows no problem.

  Thank you!!!

  You use a PowerPC (e.g., G5 Mac) machine?

  Your thread title says "2.5", but your original post mentions the upgrade to "2.6"... I bet that you are using 2.5. Is this fair?

  If the answer to both is Yes, then Yes, it's a known issue for specific camera models. It is fixed by upgrading to 2.6.

• Thunderbird 31.6.0 'write' in 'contacts' in red and blue.

  Recently updated v24.6.0 to v31.6.0 on Win7 64 bit computer portable Thunderbird.

  While 24.6.0 was OK with its functions, I said to update to 31.6.0

  Now, what opening 'write' compose an email. The upper part of the page background is blue and if I write a contact address, it is red and it won't not seized semiautomatic.

  Fixes for these errors.

  Thank you

  The new look has blue in the unused fields. They change to white when clicked on and informed. Unless find you a theme that changes this so as said Christ1, you'll have to get used to.

• ES1 - 512 hibernate if it is open, but not with the lid closed. LED will blink red and blue?

  I want a laptop, when closed, to go to sleep, then transition to Hibernate.

  When open, transition work. Race walk, sleep, Hibernate.

  When closed, transition fails. Running, sleep (slow orange blinking), and then rapid blue/red flashing LED.
  During flicker battery consumption is large and the battery goes dead quickly.

  I have tried many power configuration settings.

  Cover-> nothing or sleep - same results.

  Cover-> hibernate - works, but is NOT what I want.

  Button to Hibernate, but not what I want.

  I want to do what it should - sleep and hibernation...

  What does glitter blue/red LED mean?

  OK, I found a workaround solution - with a caveat.

  The xHCI driver is apparently in conflict with something that causes chaos when the laptop tries to transition from sleep to Hibernate with the lid closed.

  This is definitely a bug that should be fixed! Acer needs to work with Microsoft to find the problem and fix it.

  If you go into the BIOS settings (reboot and press F2) and disable xHCI.

  The USB ports will return to PCI mode. All USB ports are working, even if I think they are USB 2.0, not 3.0

  Now the power level can be set to sleep when the lid is closed and it will cause a transition to Hibernate when appropriate!

• All of a sudden seeing red and blue of overexposure and underexposure clipping overlays

  HM. Don't know what I did.

  When I press on J while in the develop module in LR CC, small white boxes around triangles on the histogram always turn on, but I do not see the usual red/blue overlays showing where the photo is longer / underexposed. Using OSX.

  The histogram shows clearly that I'm highlight clipping, so the answer is not that I have no problem cutting and so no overlay.

  Help? Thank you.

  Oh, for the love of pete I just quit and restarted and it works again. No idea what happened there, but everything is fine now. Sorry, jb

• Centro, when Im on the internet, no pictures will only show a small red and blue image

  I don't know what happened to my Centro. My son was playing with it (yes I know error #1) and when I had got it back I went to log on espn.com, and none of the pictures show only a small image with what looks like a sun bed on the blue waters with a red sky. I went to other sites (cnn, flickr and so on) but no pitures will appear. What could be the problem?

  Check your settings in Blazer.  Looks like you've changed 'Fast fashion' for the screens.

  Tap on the icon representing a lightning bolt at the top of the Blazer and see if it is set on fast Mode.  Change it to 'Normal '.

  Photos should load now.

  WyreNut

  Message relates to: Centro (AT & T)

• hyperlinks with red and blue bordersHi

  Hello

  I have a HTML file with three jpg images. I've created hyperlinks to websites for all the 3 images. However, I get this blue and Red around the hyperlink border when I preview it in my browser. Do not know why this is happening...

  Any help is appreciated. Thank you!

  Add the bottom of your css stylesheet:

  an img {}

  border: none;

  }

  If you do not use a css style sheet, then add code in the pages below. Insert it directly before the closing tag near the top of the page. Look for the one with the leader / slash.

• Images showing red blue spot and they are not sharp at all - Canon EOS 600 d

  Hello

  A month ago I bougth Canon EOS 600 D with 18-55 mm and 55-250 mm lens and everything is fine I capture images of the Moon and wildlife photography.

  But now I am facing a problem with it.

  Recently, I tried to capture pictures with my Canon EOS 600 d and suddenly, I noticed that the pictures are not sharp at all and the images show task red and blue. I don't know what to do I'm just an ammature in the present.

  Please can someone help me with this problem.

  

  

  It is chromatic aberration, it's a type of distortion that exists in all optical components to a certain extent, but varies depending on the lens.  In general, the less expensive lenses will be more CA, especially something like the kit lenses.  You'll notice more in high contrast situations, like a brilliant white on a black background.  You can fix it to a certain extent in post with programs like Lightroom or Photoshop.

• Toshiba Kira - screen flashes red green blue black

  Hi all

  I have a Ultrabook Kira I bought last year and it worked fine until about 3 months ago.

  But now he has a problem with the screen as follows.
  She suddenly starts cycling continuously full-color on-screen, and then sometimes it returns to normal for some time and randomly goes back again to the annoying cycling colors.

  Depending on the problem, it will loop the following exact sequence of colors: red, green, blue, black, gray.

  I don't think that it is a loose cable problem because it goes into the problem and comes back without any movement of the machine.

  I mean, the machine itself starts the dysfunction and restores normality by itself.
  These days, I can't work without an external monitor, since the problem is now practically constant.
  I've updated the bios but the problem remains.

  I searched for this problem all around the internet and could see that many people, who bought this laptop model, have the same problem. Thus, it seems to be a failure of the design.

  Thank you!

  > These days, I can't work without an external monitor, since the problem is now practically constant.

  For me, it would mean that the graphics card is OK and the problem must be linked to the internal display.
  However, it looks like hardware problem and that's why I recommend you contact the after-sales service provider authorized to set especially if the warranty is still valid.

  Your comments would be appreciated

• HP Omni 120-1050xt: screen goes to red, green, blue, white, black after upgrade to Windows 10

  When the PC is idle, the screen turns red, green, blue, white, black, and every time I need to turn off the machine. He said "best driver for your device is already installed" - Intel HD Graphics. I tried to uninstall, install.

  Greetings,

  HP not support your PC when you run Win 10.

  I suggest that use the "Go Back " process win 10 ASAP.

  If this is not possible because of your graphics problems you'll have to do a restore to factory HP.

  I can help you more with this if you wish.

  If the upgrade was forced on you there are ways to stop the involuntary update.

  Let me know if you need further assistance.

  Jay

• Now 23-d044 - installed MXM video card - HP Envy screen flashes red green blue black

  Hello

  I'm a 23-d044 I wanted to do the update/install video card instead of using the integrated graphics card.  I tried two different cards, a nVidia GeForce GT 540 m 2 GB and a part of HP AMD card #707804-002.  In each case the applied heat sink was part HP #694456-001. In each case, whenever I go back to the PC and it works, the screen flashes red, green, blue, black, white to infinity. I have read these and other forums indicating that this is a fault with the GPU, but I find that is unlikely given that I tried two different cards. I thought that maybe the MXM connection on the motherboard, but on the original motherboard power connector was defective, I have since replaced the motherboard (about 2 weeks ago) with the same part number. I downloaded both the AMD and nVidia drivers the most recent for each card (while running the integrated graphics card), but not joy.  Anyone have any ideas?  Thanks in advance for the help!

  Sean

  Sean, I had the same problem too.  I finally thought to it.  Just above where the grafics card go is two connectors and one of them has a plug in there.  above the connectors, said uma_lvds, the other says MXM_LVDS.  Swap the power cord of the uma_lvds to the mxm_lvds.  This will fix the problem and you will be running.