hyperlinks with red and blue bordersHi

Hello

I have a HTML file with three jpg images. I've created hyperlinks to websites for all the 3 images. However, I get this blue and Red around the hyperlink border when I preview it in my browser. Do not know why this is happening...

Any help is appreciated. Thank you!

Add the bottom of your css stylesheet:

an img {}

border: none;

}

If you do not use a css style sheet, then add code in the pages below. Insert it directly before the closing tag near the top of the page. Look for the one with the leader / slash.

Tags: Dreamweaver

Similar Questions

  • the images show black with red and blue sections on importation

    Newly installed 5 Lightroom on new computer (HP ZBook with 4 k screen).  When the files are imported from SD card on the display main and previews images are mostly black with some red and blue areas.  I tried disabling autotone and indicators of clipping and tried disabling GPU and the changing screen resolution - nothing helped.  I can see histogram and use the sliders to change the picture a bit, but can "lead to normal. The same images of this SD card are fine in Lightroom on my old computer.

    What can I do to fix this?

    Thanks, Paul

    This looks like a bad monitor profile. You must re - calibrate your monitor. If you do not have a calibrator, go to the properties of your monitor (it looks like the right of windows) and remove any profile associated with the parser. That do Windows will take your monitor is sRGB. This should solve the immediate problem, but it is always recommended that you calibrate your monitor with hardware calibration.

  • Red and blue spots

    Hello

    Have a Toshiba laptop and opened a network with inside canon cr2 files directory.

    In bridge, the pictures don't show no "arrow circle" indicating that no change has been made.

    If I open the images in ACR on the four images I checked it has areas of red and blue and blue points.

    If I find the images on my desktop then I don't see any of the colored areas.

    Hard to describe, but the Red areas are really vibrant.

    Any ideas anyone?

    Thank you

    Ian

    You did outstanding and clipping shadows turned on? Bright red areas (cutting of the red channel) and blue (blue layer, prolly in shadow) would be displayed on the image, wherever it is clipping. Click on the flags on the histogram to turn them off.

  • The red and blue of the defragmentation of observation tool areas?

    Can someone tell me if it is possible to display the red and blue areas after the defragmentation tool analysis please? All I see is a message saying that you do or you don't need to defragment, but cannot see the graphical representation, as you can do in XP.

    Thanx.

    Can someone tell me if it is possible to display the red and blue areas after the defragmentation tool analysis please? All I see is a message saying that you do or you don't need to defragment, but cannot see the graphical representation, as you can do in XP.

    Thanx.

    Vista Defrag is supposed to do its work quietly in the background. You don't even have to or should have to run defragmentation manually. Leave him alone and let him do his work.

    If you must, try the Auslogics Disk Defrag. It's free:
    You can watch the little squares blue, red, yellow, green, moving at lightning speed. You will also have a report at the end.
    http://www.Auslogics.com/en/software/disk-defrag/

    t-4-2

  • My cat was walking on my keyboard Middle edit in Lightroom and now all my photos when opened to develop are bright red and blue areas clear and hidden pictures. I can't turn off. HHHEEELLLPPPPPP!

    I don't know how in the world it happened. other than the instant my cat went through my keyboard that everything went to hell in a hand basket. I can't edit the photos because I can't see beyond the bright red and blues. They have normal air in the catalog.Screen Shot 2016-07-31 at 11.54.08 AM.png

    Click on the triangles of the histogram, the turn on and off the red and blue of break that you see.

  • Help! distortion of red and blue in the areas of light and shadow of my photos? Only develop tab...

    I am changing a stream of photos from yesterday and everything was going good edition yesterday and this morning, but now this afternoon, this blue distortion appeared in the Red distortion shadow areas into zones and clear. If I export the photo, it disappears, but it's very distracting, even if I'm in the tab to develop suggestions?

    Hi congillespie,

    The red and blue puts in light that you see are the clipping, you can turn it off by pressing the 'J '.

    Kind regards

    Tanuj

  • Help! Lightroom 2.5 red and blue lines.

    Hello everyone, Reacently I upgraded from 1.x to 2.6 and now my previews show a kind of red and blue lines around highlights, which bothers me not at all, the big problem is that these lines appears in the prints from lightroom. And that's not all these line also appears in the exported to photoshop.

    My files raw directly addressed (in PhotoshopCS3) shows no problem.

    Thank you!!!

    You use a PowerPC (e.g., G5 Mac) machine?

    Your thread title says "2.5", but your original post mentions the upgrade to "2.6"... I bet that you are using 2.5. Is this fair?

    If the answer to both is Yes, then Yes, it's a known issue for specific camera models. It is fixed by upgrading to 2.6.

  • Thunderbird 31.6.0 'write' in 'contacts' in red and blue.

    Recently updated v24.6.0 to v31.6.0 on Win7 64 bit computer portable Thunderbird.

    While 24.6.0 was OK with its functions, I said to update to 31.6.0

    Now, what opening 'write' compose an email. The upper part of the page background is blue and if I write a contact address, it is red and it won't not seized semiautomatic.

    Fixes for these errors.

    Thank you

    The new look has blue in the unused fields. They change to white when clicked on and informed. Unless find you a theme that changes this so as said Christ1, you'll have to get used to.

  • printer is, BUT only with black and blue, all other diagnoses print with all colors

    Initially, the installation of the printer REFUSED to align, took 7 attempts (OK, I've heard of Einstein quote!). Whenever I used the printer to ALIGNER PRINTER screen - the process has failed. So I looked on the web, and:

    Clean the cartridges,

    Erased the vents

    Removed and cleaned the print head

    Prayed

    Tried again

    To nothing not done, so I tried to make the diagnosis via PC software and here deepened the mystery.

    When the HP Photosmart B210 series Toolbox running I got three different results between the three print options

    A Diagnostics Page of print quality gave me five Ba's maximum color printing

    Align the print heads gave me the black and blue boxes/lies/grids and the message alignment successful

    The print Diagnostic information gave me all four colors with a lot of useful info, including the print head 73 calibration trust level: 0

    Ideas anyone, before I bin it and buy a Kodak or disgusted Epson

    What exactly is the problem?  Alignment aligns the print head color to the black print head, and black and one color (cyan for your printer) are required for this.  (There is probably an extra set of blocks that prints gray blocks fade to white.  This section is used to calibrate the energy for the colors).  The other test pages that you printed will be print various diagnoses or test pages that will use all colors.

    A successful alignment page requires the page be printed on white paper not used and requires that the cyan and black sections print correctly.

  • ES1 - 512 hibernate if it is open, but not with the lid closed. LED will blink red and blue?

    I want a laptop, when closed, to go to sleep, then transition to Hibernate.

    When open, transition work. Race walk, sleep, Hibernate.

    When closed, transition fails. Running, sleep (slow orange blinking), and then rapid blue/red flashing LED.
    During flicker battery consumption is large and the battery goes dead quickly.

    I have tried many power configuration settings.

    Cover-> nothing or sleep - same results.

    Cover-> hibernate - works, but is NOT what I want.

    Button to Hibernate, but not what I want.

    I want to do what it should - sleep and hibernation...

    What does glitter blue/red LED mean?

    OK, I found a workaround solution - with a caveat.

    The xHCI driver is apparently in conflict with something that causes chaos when the laptop tries to transition from sleep to Hibernate with the lid closed.

    This is definitely a bug that should be fixed! Acer needs to work with Microsoft to find the problem and fix it.

    If you go into the BIOS settings (reboot and press F2) and disable xHCI.

    The USB ports will return to PCI mode. All USB ports are working, even if I think they are USB 2.0, not 3.0

    Now the power level can be set to sleep when the lid is closed and it will cause a transition to Hibernate when appropriate!

  • Centro, when Im on the internet, no pictures will only show a small red and blue image

    I don't know what happened to my Centro. My son was playing with it (yes I know error #1) and when I had got it back I went to log on espn.com, and none of the pictures show only a small image with what looks like a sun bed on the blue waters with a red sky. I went to other sites (cnn, flickr and so on) but no pitures will appear. What could be the problem?

    Check your settings in Blazer.  Looks like you've changed 'Fast fashion' for the screens.

    Tap on the icon representing a lightning bolt at the top of the Blazer and see if it is set on fast Mode.  Change it to 'Normal '.

    Photos should load now.

    WyreNut

    Message relates to: Centro (AT & T)

  • Satellite M40X-169 when it is connected to the wireless device stop with restarts and blue screen

    Hello.

    I had the problem with my laptop when I connect and get connected to the wireless network. My laptop stops with the Blue error screen, then restarts.

    Maybe you can help me solve this problem, because I can't work normally when I need to be connected.

    Plaese help me.

    Hello

    It is not easy to give you a precise answer, but try to remove WLAN card from Device Manager, and then restart the device. You can also check the Toshiba download page and try to install the latest driver for the WLAN card.

  • All of a sudden seeing red and blue of overexposure and underexposure clipping overlays

    HM. Don't know what I did.

    When I press on J while in the develop module in LR CC, small white boxes around triangles on the histogram always turn on, but I do not see the usual red/blue overlays showing where the photo is longer / underexposed. Using OSX.

    The histogram shows clearly that I'm highlight clipping, so the answer is not that I have no problem cutting and so no overlay.

    Help? Thank you.

    Oh, for the love of pete I just quit and restarted and it works again. No idea what happened there, but everything is fine now. Sorry, jb

  • Features red and green Qosmio F30-117 - display problems-

    Hello

    I have a qosmio F30-117, and until recently, I was thrilled with everything about it.

    Then, mid session, graphics started to deteriorate, which fixed a reboot.

    Then a few days later, he did it again and this time when I rebooted it came with a display corrupted, a lot of aa in all directions then red and green lines everywhere.

    Managed to get by selecting safe mode with network and got a desktop computer but still with red and green lines everywhere.

    Now its got worse again, when I start the screen of the laptop itself is empty, becomes something because it is not completely black as if it was when its engine turned off, but his Blanck.

    To check I have connected to an external monitor and managed to get again in safe mode with network, but still very bad and always red and green lines everywhere.

    I started to take a ride on the old good www and there are many posters and articles with problems and many mentioning the lines red and green etc...
    so I'm not alone, but no one seems to know exactly what it is.

    Some have mentioned the grateful Toshiba this as a problem and make even if out of warranty repairs.
    Thus, ideas, advice and does anyone know if Tosh have agreed the problem and offer any help?

    Thanks in advance

    Hello

    In my opinion, this looks like a problem of graphics card GPU eventually started to malfunction, and in this case to replace the motherboard.

    > Some mentioned Toshiba grateful that as a problem and make even if out of warranty repairs.
    Thus, ideas, advice and does anyone know if Tosh have agreed the problem and offer any help?

    It doesn't have to be dull I ve also found this update from Toshiba product support page, but there is nothing listed on the problems of F30
    http://EU.computers.Toshiba-Europe.com/innovation/generic/PRODUCT_UPDATE_SUPPORT

    What to say. Seems only a technician ASP might solve your problem, but replacing motherboard is a costly affair so it s your own decision to want to do

    In any case... good luck...

  • Pink and blue stripes then the screen freezes

    The screen will get pink and blue on stripes and then it freezes and must be turned off manually or a battery pull.

    Hello

    You are facing problems with pink and blue stripes and the freezing of the screen.

    -When exactly are you facing this problem?

    -Do you have the question started recently?

    -What is the brand and model of the computer?

    -What operating system is installed on your computer?

    -Did you do changes on the computer before this problem?

    Method 1: I suggest you follow the steps to run the troubleshooter of material from the link and if it helps.

    Open the hardware and devices Troubleshooter

    http://Windows.Microsoft.com/en-za/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2: I also you suggest trying to update display drivers and video card drivers, then check if the problem persists.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    HOEP that helps.

Maybe you are looking for

  • When to use the sleep/wake button?

    I'm a little confused on how to better close my 5th generation iPod touch - IOS 9.3.2 - when I finished a session. I must: Let the power down on its own? Turn off with the sleep button sleep? What is "best practice"? Thank you! Dan

  • Prepare emails to the original copies

    What is the best way to save original copies of email?

  • Cannot activate wireless home router N. WRT120N model number

    The problem is that I have Vonage phone service that requires the internet service.  I spoke with several agents of Linksys, none seem to understand the problems or know how I connected.  In short, with the Linksys modem, the modem from Comcast and t

  • WUSB54GSC Wireless does not connect to Internet

    Hello I have an ongoing dilemma.  I have an adapter WUSB54GSC I try to connect to the Internet with.  I tried several remedies listed on this site, as well as several times for loading and unloading the adapter software program.  I loaded the drivers

  • Monitor is empty and the keys have no effect on anything.

    Monitor is empty and the keys have no effect on anything. With the computer off, I disconnected the power and removed the battery. Then I pressed the button On and connected to the power supply. The battery light and the touchpad light began to Flash