(Redirected) cable for 8RYX9 internal card reader

Similar Questions

• Internal card reader freezes Satellite Pro A due to bent pins

  Hello

  The stems of my internal card reader are folded due to a card of memory being glued and then removed.
  This causes windows to freeze at startup.

  Now I can disable the software etc. to stop what's happening, but what I'd rather do is to physically unplug the internal card reader, so Windows does not attempt to find it and crashed.

  Is it easy to remove the card reader internal?
  If yes then it would cost a fortune to obtain Toshiba to fix?

  I don't really want to spend a lot of money on something that is not a value of more than £200, which I intend to sell soon.

  See you soon,.
  Dave

  > but what I'd rather do is unplug physically the card reader internal, so Windows does not attempt to find and crash.

  Since the card reader is part of the motherboard, you can not disconnect it physically.
  In your case, there are two possibilities;
  Either buy and replace the motherboard (I think that it s not an option for you die at high costs) or you would disable this card reader in Device Manager

  Welcome them

• My Satellite A100 does not support SDHC cards with the internal card reader

  Hello

  My Satellite A100 can't stand my sandisk 4 GB SDHC.
  'normal' SD cards are not a problem with the internal card reader, and there is no problem with the 4 GB sandisk SDHC card using an external card reader.

  is there a software solution?

  regrads,
  Itock

  I don't have the time to read the manuals for your model of laptop users, but can be registered to all supported cards. I guess SDHC not registered and not supported.

  I don't know what you mean with the software solution, but as far as I know, update for multimedia card reader is not available.

• Internal card reader card ZBook 15 SC

  I wonder if someone can provide specifications or information about the speed of the SD card on my new ZBook 15 reader. I use this for work and want to have a removable device to store personal files. I am currently using a 32 GB SD card, but it isn't excellent performance. I am considering either pass a 64 GB USB 3 flash drive or faster 64 GB SD card. What I want to know is how (what bus) internal card reader is connected to the and which will be a limiting factor even if I buy a fast SD card. Is there a record of read/write for the crack and what can be expected with different types of SD card?

  Hi Mcramblet,

  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.
  
  Thank you.

• Satellite M40X: Internal card reader does not work

  My internal card reader does not work. I think that I have not yet installed the driver, or may have other reasons, I don't know. Please show me how to find and install this driver.

  Thank you!

  Can you please check the Device Manager and tell us if any unknown device is listed there?

• TouchSmart 520: update driver for the sd card reader is not available

  Recently updated for Windows 10 and since then had to install several new drivers.  Last attempt is for the sd card reader driver.  Same error comes back constantly, "HP is experiencing difficulties, please try again later".  Day 3 same error.  I talked to my son-in-law who is a COMPUTER expert and he warns of the use of other than original manufacturers drivers, so I'm stuck, zusammenklappbar to transfer my photos from sd card on my computer.   When I called HP support, I am told that they can help for a one time fee $50, something I'm not willing to do, I'll buy another computer before going this route

  Hello:

  It is not not a 3rd party driver.

  There is no driver W10 from HP for your PC.

  The reader of card on your PC was manufactured by Realtek, so that they provide the drivers for HP.

  It is a universal driver that works on all card readers.

  If you're skeptical, then see if this W10 card reader driver HP works.  It can not, because it can be for different model Realtek card readers that your PC has.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_150855_1&swEnvOid=4192

• Haw to download and install a driver missing for my memory card reader?

  Haw to download and install a driver missing for my memory card reader?

  Hello

  I'd be happy to help you. What brand laptop do you have? Is what model? And you know the brand of card reader? I need this information to find the right driver for you.

  Kind regards

  BearPup

• internal card reader must be disabled and then enabled in before Device Manager it will not work properly.

  Whenever I start my computer, my internal card reader must be disabled and then enabled in before Device Manager it will not work properly. I put an SD card in there and auto does not work. I check my computer and it shows that it is there, but when I double click on it to open it I get a message saying: Please insert the SD card. When I go to Device Manager and disable and enable fine orks. I tried different cards, but it makes no difference.
  I installed a different card reader, but another did the same thing. This leads me to think it's a matter of Windows.
  I tried to do a repair install, but it ends and said that the upgrade has failed?
  Anyone have any ideas on how to solve this problem.

  I am running Windows 7 Pro 64-bit. It is a Renesas controller and I use the 2.1.28.0 with firmware driver 4015.

  I'm not sure but I may have found the problem. I see where a guy here was having a similar problem and it was caused by Acronis. I recently installed Acronis 2012. I have been lucky to uninstall, but I will update this post when I do.  He was also running windows 7-64 bit on a motherboard ASUS!

  Acronis was the problem.  I uninstalled Acronis and now my card reader works as it should.  Strange!

• USB internal card reader not detected by Windows 7 Pro 64

  The return of the story is this: my Dell Inspiron 546 recently dropped when the HARD drive failed terminally.  "Rather than replace the HD, I opted for the upgrade of ' with a refurbished desktop computer.  I'm done with a Dell Optiplex 760 MT, which I am very happy with.  He has a new 128 GB SSD mounted and I have a new 1 to Seagate Barracuda disk HARD ready to go in it, when I get a longer SATA data cable for it.

  In any case, I got a few pieces off the Inspiron to go in the Optiplex: memory card reader 2-4 GB of RAM, DVD - RW and media 3.5 "internal.  The RAM of works well (taking the system to a total of 6 GB).  The DVD - RW works fine (once I activated the SATA port in the BIOS).  However, the card reader does nothing.

  I plugged into a vacant USB connector on the motherboard, which has been marked something like "INT USB".  However, Windows doesn't see it, and it does not show in the Device Manager.  It's as if she is not there at all (no lights, nothing).

  This card reader worked fine on the Inspiron (which was an AMD Athlon 64 machine, but running Windows 7 it 32 b).

  Any ideas?  I had a glance through the BIOS and can't see anything obvious.  I assumed that being a USB device, it would just spring to life, but I do not.

  The Optiplex has the following important elements:

  Intel Core 2 Duo 3 GHz (E8400)

  Intel Q43 chipset

  Transcend SSD 128 GB

  6 GB of RAM (2 x 1 + 2 x 2)

  (HD 3000 memory) integrated Intel graphics card

  DVD - ROM (standard adjustment)

  DVD - RW (from the Inspiron).

  The fixed.

  First, to use the USB header, you should disable the "floppy" in the BIOS.  I tried this but it didn't work.  However, States manual service, you should disable the front disk to install the player, so I unplugged the drive, put under tension, then stopped again, plugged in and restarted.  I also disconnected and re connected the cable at the end of the drive.

  According to these fixed it, I don't know, but now it's the hunky dory, seen in the maps of Manager and reading of the device as it should.

• No drive letter for USB PCMCIA card reader

  I use a card reader Addonics AEPUDDU Digi - PCMCIA (USB for PC connection) drive with a desktop XP computer.  Now, when I plug in any card memory PCMCIA (I tried several), the card reader recognizes the insertion of the card (the Green led lights up), like the PC (the icon appears in the system tray), but it does not affect no matter what drive letter to the map, so I can't access it all (through Windows Explorer).  If I click on the icon to eject, I get the usual pop-up message ("Remove USB mass storage device"), still only refers to a drive letter.  Clicking on this message gives the 'Safe to Remove Hardware' popup normal.

  Moreover, this habit of work very well, and then several weeks ago began this strange behavior.  Some days it works OK, a few days would not work.  Sometimes restart would fix it.  Today, it doesn't seem to help.

  Why XP will not assign a drive letter to this device, and how do I fix?  Thanks for any help or suggestion...

  Moreover, this habit of work very well, and then several weeks ago began this strange behavior.  Some days it works OK, a few days would not work.  Sometimes restart would fix it.  Today, it doesn't seem to help.

  Assuming you are trying to read of the same type and media memory size that used to work and other USB devices plugged into the same USB taken work, it seems that the device failed.  That means Addonics offers technical support?

  I guess that you tried to connect the unit on different USB Sockets.

  Open the Device Manager (start > run > devmgmt.msc > OK).  I don't know where this device will be displayed.  Look in the hard drives and the Bus USB controllers.  Are there error icons?  If so, double-click the name of the device and see which appear under the heading "status of the device.

  If nothing is reported as bad, it is possible that uninstalling and reinstalling might help.
  Double-click the Device Manager entry and select uninstall.
  Then disconnect the device and reboot.
  Then plug in and let Windows recognize it and install it.

• Internal card reader & USB ports stop working in Windows 7 64 bit - HELP

  This seems to be VERY popular problem between Vista and 7 users. I can't find the right difficulty any where. I have a HP Pavilion of D5200T running Win 7 Home Premium 64-bit. (I can provide more specific if necessary specifications). I read a few other posts in this forum with exactly the same problem as me, I tried the suggested fixes - most of them anyway - and my problem persists.

  This is the story of the kind: bought PC Cognac nine in June 09. It came with Vista Home premium 64-bit. On the front panel, I have the HP 15 in 1 reader cards and below that another panel with micro/headphones, 2 USB ports and 1 port Firwire catches. They all worked great worked great, no problem at all. I bought Windows 7 and improved in October 09. These two USB ports and card reader have been in place since then. I turn on the computer or restart works and they. Slide into a car SD, CF, whatever it is. Little green light turns on, windows automatically opens on the screen indicating the contents of the card.

  The card reader is no longer everything first. It may be 15 minutes later, perhaps hours. I slip on a map and still get the little green light but nothing on the screen. As if no card has been inserted. 2 USB ports will do the same thing, just much less frequently. I step a USB item and I have an error message saying: is not recognized or not installed properly. If I restart - they are all back to work very well.

  So... this problem only started after the Windows 7 installed, then it is clear to me is where the problem lies. When card readers or USB is in their State of non-working, I'll go to Device Manager and see that they are always listed, and there is no indicator of errors.

  This is what I remember by train so far, without success. I uninstalled devices from the Device Manager, driver too. I tried unplugging them from the card, restart, reconnected, reinstall. I tried different plugs on the motherboard. I can't find the latest drivers. The courses are MS 21/06/06 6.1.7600.16385. I think I tried all utilities integrated in Win7 to try and diagnose, and none of them produced no results. I tried to disable the sleep function. I even reached out to HP support, and the best they have resulted so far is that the card reader is bad. They are sending me a new, but I do not think that this problem will be solved.

  As I said, I see this problem or similar to many, many forums but I have rarely seen a happy ending where it was fixed. Someone at - it the key? Help, please.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• AutoPlay does not work for my SD card reader.

  I can't get autoplay or all default settings to work when I put an SD card in the reader.  It does not work to press SHIFT with the media in.  The only way I can get the pictures on my SD card is going on computer and clicking on the SD card.  I would like that for map contents SD be imported automatically into my pictures folder (as I did on Vista).

  Yes, if you open WL library before inserting the SD card and insert then SD, WL PG will notify that an external device with images has been added, you want to import?

  I found this fix somewhere (I don't take credit for it). This will bring autorun to the SD card reader. I'm sure that is deliberately not functional for safety etc.

  create two reg files. Name them as you wish. Whenever I have install win7 or reinstall it is one of the first things I do. Still works. (Once you have created a text file with the .reg extension for each you can insert into registry by double-clicking the files newly created reg.)

  1 reg file:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoActiveDesktop" = DWORD: 00000001
  "NoActiveDesktopChanges" = DWORD: 00000001
  "ForceActiveDesktopOn" = DWORD: 00000000
  "EnableShellExecuteHooks" = DWORD: 00000001
  "NoDriveTypeAutoRun" = DWORD: 00000000

  2 reg file:

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoDriveTypeAutoRun" = DWORD: 00000000

  Good luck

  GE

• My USB 3.0 internal card reader SD and bus have both work to quit at the same time. Need help in restoring

  On my Macbook Pro 13 inch Core I5 2 .6GHz, I just noticed that my SD card reader and USB ports have stopped working. Buses from USB 3.0 and player appear in the information of the reporting system. I tried to reset PRAM and SMC but no luck so far and my Time Machine backup is on a SSD in a USB 3.0 hard drive enclosure. Any ideas how to reset the USB 3.0 Bus and drive? I'm including all system information in case it is useful

  System information:

  Model name: MacBook Pro

  Model identifier: MacBookPro11, 1

  Processor name: Intel Core i5

  Processor speed: 2.6 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 3 MB

  Memory: 8 GB

  Boot ROM Version: MBP111.0138.B17

  : 2.16f68 SCM Version (system)

  USB:

  USB 3.0 Bus:

  Host Controller Driver: AppleUSBXHCILPT

  PCI Device ID:0x9c31

  PCI revision ID:0 x 0004

  The seller ID:0 x 8086 PCI

  Host controller USB Bluetooth:

  Product ID:0 x 8289

  ID:0x05ac of the seller (Apple Inc.)

  Version: 1.18

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Built-In: Yes

  Software:

  Presentation of the system software:

  System Version: OS X 10.11.5 (15F34)

  Kernel version: Darwin 15.5.0

  Volume: Macintosh HD to startup

  Boot Mode: Normal

  MacBook Pro name: Stuart computer

  User name: Stuart Berwick

  Ensure the virtual memory: enabled

  Integrity of system protection: enabled

  Since the starting time: 6 minutes

  USB 3.0 Bus:

  
  

  OS X Yosemite: If a USB device does not work

• Portege R830 - driver for WinXP SD card reader

  Hi all

  Quick question - I have problems reading SD cards on my R830 Windows XP with SP3. I installed all the Toshiba official drivers, including the 'Ricoh Card Reader 2.11.17.02' driver, but every time I insert an SD card it does not not detected. Anyone got any ideas how I can get the SD card reader work?

  Thanks in advance!

  Do you do maps/maps only sustained use?
  What is the status of the card reader in device (storage controllers) Manager?

• necessary assistance for sample multithreading "card reader".

  Hello

  at the present time that my data acquisition program consists of several floating panels, one is the "main" Panel, and then there are other 'dashboards' that operate different instruments (by type of instrument panel).

  Now I have studied the "card reader" sample because I wanted to use my "dashboards" in individual threads. I have not succeeded only partially. I can start the discussions via CmtScheduleThreadPoolFunction and run each panel using its own RunUserInterface. And I can leave individual UIs by their respective button "quit".

  What I can't do (and the sample OR not do it either) is to automatically close all individual dashboards simply by closing the main table. In the example, the main panel can be closed, but the graphic Panel continues to operate. How it could be achieved in the sample that by closing the main table Board graphics, closed unexpectedly, too?

  Thank you very much!

  Wolfgang

  Inside of the multiblade sample button 'Exit function' contains a function to terminate a thread to the main thread, so you can mimic the behavior of the function to achieve your goal: secondary endpoint all sons teminating before your application.

  Take a look at the modified version of the card reader which I enclose you. I pressed the NotifyThreadFunctionExecState () function that is used in the example to fill the list of active threads: I added to it a meter thread active so that I don't know that all threads are actually end before leaving the main thread.