(Redirected) Problem in the passage between the laptop and TV with Inspiron 1501 (windows7 operating system)

Similar Questions

• Unknown device on network adapter between the laptop and the wireless router

  I am running windows 7 64 bit on a laptop computer connected wireless to the router and internet.  The router is Linksys WRT160N connected to the internet.  The map of the network, there is a question mark device unknown between the laptop and the router.  However, I still have access to the internet.  In terms of network, if I hover over the laptop, it does not show an IP address.  It only shows the name of the computer and its MAC address.  Any help would be appreciated.

  Solved my problem.  I checked the button of the IPv6 protocol in the properties of a network connection on the laptop, and now I can see it's the IP address and the unknown device has been replaced by a switch and hub which is part of the router.   I do not uncheck the button IPV4.  I'm guessing that it is a bug in Windows 7 that you need to cut of ipV6 Protocol when you have a Win XP computer on the network if you want to see a map of own network.  As I said before, everything worked before, so this seems to be a cosmetic fix only.  I see that my shared files on the XP computer appear faster after a reboot.

• After I install my laptop bootcamp has restarted and said there was a problem and restart your laptop then I check my memory of the laptop and my mac 210 GB is 180 GB and when I checked the scores he had only a mac partition

  After installing bootcamp my laptop has rebooted and said there was a problem and restart your laptop then I check my memory of the laptop and my mac 210 GB is 180 GB and when I checked partitions there was only a mac partition and I can't get back the deleted memory

  Post a screenshot of what shows utility disk to disk

  How to take a screenshot on your Mac - Apple Support

  OSX works OK?

• OfficeJet Pro 8710: Impossible to establish the wireless connection between my laptop and OfficeJet Pro 8710

  I'm tryng to connect wirelessly between my laptop and printer but I am unable to do so.

  My laptop finds the printer and when I go to add the device I invite me to "Enter the WPS PIN code for your printer". So, I printed out the Configuration Page of the network and it gives me the "wi - fi direct password", which I suppose is the password that is required to establish that it connection (I may be wrong in my explanation). However, when I type the password on my laptop it does not establish the connection. I said "try to add the printer again, or check with the manufacturer for addiitonal installation instructions.

  Any insght and assistance is greatly appreciated.

  Thank you.

  Hello

  You should searh for your wifi network at home and connect your printer and the laptop to the network. Direct WiFi option is really only for configurations that do not have a modem/router.

  You may need to disable the option Wireless directly on your printer to help the wireless configuration.

• I have paid the monthly fee and have been using Acrobat Pro DC.  I had a problem where I broke my previous laptop and want to continue to use this product.  I bought a laptop and I don't know how to download the program without havin

  I have paid the monthly fee and have been using Acrobat Pro DC.  I had a problem where I broke my previous laptop and want to continue to use this product.  I bought another laptop, and I don't know how to download the program without having to pay again.  I pay $14,99 per month for this service, how can I download it without having to pay again?

  Hello

  Please download Acrobat Pro ms of the here. After you download the application, install and activate it by providing your Adobe ID

  Thank you

  Abhishek

• (Redirected) Power adapter green light turns off when the laptop battery is plugged into the laptop and does not load.

  Power adapter green light turns off when the laptop battery is plugged into the laptop and will not charge; If the laptop battery is not plugged into the laptop adapter it's still green and will charge the laptop.

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Tip: when you post a message, preferable to always include the computer model.

  Bev.

• of the laptop and monitor external both go to a black screen

  OK, I have a laptop Toshiba Satellite L675D and monitor external lg I've used for more than a year. the problem I knew it is that when I turn on my external monitor both the monitor to the laptop and external monitor goes to a black screen and to get the office page I have to turn off the monitor external and in a few seconds, the computer desktop computer laptop monitor will reappear. Fault could be the problem?

  Hello

  1. What is the model of the LG external screen?

  2. have you made changes on the computer recently?

  3. have you installed all the updates on the computer?

  Method 1.

  Connect the external monitor to a different computer and check if it works.

  Method 2.

  I suggest to update the graphics drive and check if that helps.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Refer.

  Move windows between multiple monitors: http://windows.microsoft.com/en-US/windows7/Move-windows-between-multiple-monitors

  Setting up dual monitor: two screens are better than one:
  http://www.Microsoft.com/athome/organization/twomonitors.aspx

  Guided Help: Setup dual monitor is easy in Windows 7:
  http://support.Microsoft.com/kb/976064

  I hope this helps.

• When I connect my laptop L300D to my LCD tv using VGA to VGA it works fine for a few minutes then the screens n that the laptop and TV started blinking on and outside. Can someone advise please.

  When I connect my Toshiba L300D laptop to my Samsung 40 inch lcd tv using vga to vga connection it works fine for a few minutes. Then the screens on the laptop and the TV start to turn on and turn off, also jumps around cursor. Can someone tell me what is the problem and how to correct.

  Hello

  Try changing the VGA cables and check if it helps.

  If the problem persists, then I suggest you to update the firmware.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve the issues___Thanks__Peter

  I have windows vista business edition is installed on the desktop and Vista home edition on my laptop I can't access files on the laptop and vice versa, I am using a d-link adsl router can u help me solve problems

  Thank you
  Peter

  Hello

  The easiest way is with a crossover cable - a special wire to connect the two systems.
  You can get one at your local computer store - they are not expensive.

  Also check with the site of the manufacturer of your router, because they will have in-depth details on how to
  set up the network.

  ====================================

  Or you can set up a wired or wireless network.

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  Ad-hoc networking
  http://windowshelp.Microsoft.com/Windows/en-us/help/0e158c21-4C70-4235-879d-0c9133218e561033.mspx
  Set up a computer-to-computer (ad hoc) network
  http://windowshelp.Microsoft.com/Windows/en-us/help/293c504f-b944-4d5d-835c-f080129bd5dc1033.mspx

  How to set up an Ad Hoc wireless network in Windows Vista
  http://www.home-network-help.com/ad-hoc-wireless.html

  Create an ad hoc WiFi network secure on Windows Vista
  http://www.Intel.com/support/wireless/WLAN/sb/CS-025386.htm

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• After you have reinstalled Windows 7 on my laptop, I get the product key on the bottom of the laptop and it says that it is not valid!

  I have a problem. The laptop that I have, I had to reinstall windows 7 64 bit on it, I used the registration key that was on the bottom of the laptop. Now he know that the key is not valid, and I again windows registry. What can I do?

  original title: registration key problem. Need help as soon as POSSIBLE!

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  It is quite possible that all you need to do is to use activation by phone-

  telephone activation.
  Click the Start button
  in the search box, type
  SLUI 4
  and press the Enter key
  Follow the instructions - but when asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you.

• Wonder about the difference between the element and symbol with draggable drag

  I'm trying to understand the difference between a symbol and a with draggable element.

  She is the example I did: https://www.box.com/s/v2s8ueeqof9litu4zvwm

  • for the Rectangle element, drag works very well. The item dragged from where he is.
  • the symbol of the box which is initially 0 left and top 0, no problem
  • the symbol of the boxCopy which is placed on the left 100 and top 100, on the trail, he jumps to this amount.

  I guess drag Gets the original position of the symbol on the stage box and add these numbers to the position of the step. I have the symbol arround medication and it seems that the scene is translated left and top of the amount of the left and top of the symbol.

  This does not happen with the Rectangle element.

  Obviously there is something I don't understand.

  Ok. Joel gave me the solution.

  After you have placed your symbols on the stage, remove the left and top lines in the symbol. This will reset to (0,0).

  Here is the corrected file. In the left panel, you will see that there is no left and top except one to show the difference.

  https://www.box.com/s/v2s8ueeqof9litu4zvwm

  

• take files from a backup of the laptop and put it on windows 7 / firefox

  My laptop has been cut. I would like to take files from a backup made a few months ago on the laptop - and put them on an upgrade to windows 7. I want only a few files and my tax file is on the computer of windows 7 (from the laptop). I don't know what would happen if the laptop backup C D has been placed in the windows 7 computer.

  Mozilla Firefox stores all your personal settings, such as bookmarks, passwords and extensions, in a profile folder on your computer, in a separate place from the Firefox program.

  Profile backup and restore

  • http://KB.mozillazine.org/Profile_backup
  • https://support.Mozilla.org/en-us/KB/back-and-restore-information-Firefox-profiles
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• has deleted part of the key of windows vista which has been integrated with the laptop and when I start the laptop it asks activation, what to do, please give solutions

  the sticker on my laptop has disappeared/deleted and I am not able to see the full key for windows vista operating system has been pre-installed on the laptop and now she asks activation and I did not quite correct key because he got faded/deleted, how can I get the key to work on the laptop I have compaq-presario-cq60-420 US laptop.please help me or give me the microsoft contact numbers where I can get my key of windows vista back by providing the serial number and the product number for my laptop.  I am unable to work as the laptop does not work without the activation key.

  Hello

  You can use a magnifying glass and a flashlight to see if you can read the numbers of the product key on the label.

  Or take a picture of it and expand it on the screen.

  ______________________________________________________________

  Also that, read also:

  You can contact your computer manufacturer and ask them to send you a set of recovery disks and to reinstall the operating system.

  They should do this for a fee, if they still have available to them.

  _____________________________________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  ____________________________________________________________

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  The methods above resettlement generally do not require allows you to provide a product key during Installation, the recovery process uses the Installation product key factory to activate automatically during the resettlement process.

  See you soon.

• I have the laptop Latitude 630 with Vista and want to upgrade to Windows 7. This laptop will be able to upgrade to Windows 7?

  I have the laptop Latitude 630 with Vista and want to upgrade to Windows 7. This laptop will be able to upgrade to Windows 7?

  original title: to upgrade

  Hello

  Read this information before you buy Windows 7:

  "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/download/en/details.aspx?ID=20

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  And here is the site of Dell to see if Dell has Windows 7 drivers available for your model

  http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection

  See you soon.

• I have CS4 software. When the first time I install, I chose the content of the normal installation. Then I found that there is no photoshop in the start menu. After that, I try to put the disk in the laptop and find that it has Photoshop on

  I have CS4 software. When the first time I install, I chose the content of the normal installation. Then I found that there is no photoshop in the start menu. After that, I try to put the disk in the laptop and find it didn't photoshop on the list "installation."

  Download the files to install cs4 design premium and install ps to use them,

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.7.1. 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".