(Redirected) Reference Dell click 2 fix +.
Can someone send me Dell click 2 fix + software for my computer laptop inspiron 5000 5548.I need this software. Help me guys. Thanks in advance. Nikhil351
Hi Kaosar,
Please repost this in the laptop computer forum help.
http://en.community.Dell.com/support-forums/laptop/#pi26696=1
Tags: Dell Products
Similar Questions
-
Hello
When I turn off my laptop the fan starts to spin then and during a night, it drains the battery from 100% to 0. I also have some problems of marketing. If the computer is in sleep mode itself or by me, I can't wake up, need button for 10 seconds and then push again and it starts. When turned on, it works perfectly but has these problems. I read somewhere that the resolution of these problems has been to remove the software intel from my computer and I did. It helped but 2 days computer started having these problems again. My system is Windows 7 64 bit. This problem started after that I have somehow left fully charged computer asleep on the charger for about 2 hours. When I came back fan was spinning and the right side of the laptop was hot. Again, battery life is great and computer has no defects during the work (all tests by dell are passed). What can you suggest me to do?
As you have a laptop, better make this laptop in the computer Forum post here:
http://en.community.Dell.com/support-forums/laptop/default.aspx
Bev.
-
I installed a 250GB SSD mSATA. I want Windows to run this SSD and not the 1 TB drive. How can I do this?
Hi rajivthakar,
Please repost this in the forum of discs to help.
-
(Redirected) Reference Dell 3442 speaker
Just bought my new laptop of Dell 3442 and having problems with the sound from the speaker.
the voice is too small even if only I put it at nearly maximum level...
need help for this kind of problem.
Thank you
As you have a laptop, better make this laptop in the computer Forum post here:
http://en.community.Dell.com/support-forums/laptop/default.aspx
Bev.
-
When I plugged my inspiron Dell5050 the touchpad is not working properly. After removing the charger, the touchpad works properly. I restore my system, open in safe mode, digonsis the system, but it has not helped me.
Hi dkydell.
Go to your profile and change your user name. We are not allowed to use Dell as our username.
Please repost this in the laptop computer forum for interventions.
-
(Redirected) Reference Dell system 325 replacement ROM BIOS chips
I have a Dell system 325 legacy I need to restore. It does not start. Where can I get the original replacement with Phoenix ROM chips more version 1.10 X 48 BIOS (January 1988). The system is CPU 80386 Version A01 - 034 a 80387 coprocessor. The chips are two 28 pin DIP ROM (ROM 0 and 1 of ROM). There are stickers on the chips:
Dell Computer Corporation
P/N 1 20852
Rev A01 4 - W15Dell Computer Corporation
P/N 20852 0
Rev A01 4-1-W15I think I need only the BIOS file and replacement chips and someone for their flash?
Can someone help me? Thank you.
Recognizes Dell technical support chat is no longer my service tag number. Said that they have been written off (from their database I guess).
Hi RUNNINGCHHUCK54,
Please repost this in the help desk forum.
-
(Redirected) Reference Dell Checkup analysis HDD problem
I was on my PC when a popup is right in saying that a chekup needed to run to verify that my PC works ok, I started the test and he said the following
Targeted reading test - FAILED
SMART short self-test - failed
What do this mean and what do I do about it?
I didn't notice what's going wrong with my PC, but after a week, he was once an error saying that I had to reinstall my hard drive but I ignored him
any help would be appreciated
Hi Chompy156,
Please repost this in the Alienware forum for faster assistance.
-
(Redirected) Reference Dell D430 - no boot device
I installed a new hard drive in the laptop second hand - it is recognized in the Bios/devices. Now, try to install the operating system of the reader of cd, but when starting message appears "no devices found startup, press F1 etc." Diagnosis don't identify any problems. Postings on the internet read, this seems a common problem, but not one that I was able to resolve yet. Any advice would be appreciated. Thank you
As you have a laptop, better make this laptop in the computer Forum post here:
http://en.community.Dell.com/support-forums/laptop/default.aspx
Bev.
-
(Redirected) Reference Dell Enterprise Reporter
I'm new on the Forum site. We are currently testing the Dell Business Reporter tool. I am a 10 month at a client project, and we have very specific needs, we strive to fill for the customer. We would like to find someone to customize settings for us in the Enterprise Reporter tool to create 2 different types of reports in Windows 2003 / 2008 mixed Windows file sharing / DFS environment. We are looking for the following parameters:
- List of folders, shares, date of last access on a per-server basis in a specific site.
- Another report which includes membership in a group, the group owner (as indicated in the description of the announcement of the Group) and Department of individual users (also from AD).
My NOTE to the ADMINemail address: Email ID deleted by privacy policy >
Hi rmharris97,
Please repost this in the customer center enterprise tech forum for faster assistance.
http://en.community.Dell.com/TechCenter/enterprise-client/f/
-
(Redirected) Reference Dell S2340L
I played Civilization V and when I left, I suddenly have this problem. warranty this cover? I thought that monitor Dell was supposed to be good. It has not yet been 1 year again. :(
Hi lxz,.
You can ask your question in the Forum of monitors, as this forum is for non-technical questions. Thank you.
-Robert
-
So I saved for different types of documents on a flashdrive (PDF, Word, Excel) and after having placed the flash stick drive in port on my Dell 1815n, an error pops up that States format not supported for files. I have formatted the USB stick, but cannot get anything to print. I tried 2 different flash drives to ensure that either has not been corrupted? Any help?
Best of this post in the Forum of devices/printers, here:
http://en.community.Dell.com/forums/3528.aspx
Bev.
-
(Redirected) Reference Dell chromebook 11 with Intel i3 chip
Hello
I need a new Chromebook low cost asap
What will be the chromebook dell 11, with an Intel i3 chip, go on sale?
How it will be in the United Kingdom?
Why not buy the Acer (also cheap) 720 / 720 p instead?
Hi redteddead,
Follow this link for Dell Chromebook to the United Kingdom.
http://www.Dell.com/UK/Business/p/Chromebook-11/PD?~SRD = true & sk = chromebook & scat = prod
-
(Redirected) Reference Dell B1165nfw
the façade extends over
Lorne-21
Best of this post in the Forum of devices/printers, here:
http://en.community.Dell.com/forums/3528.aspx
Bev.
-
Reference Dell vostro 1520 with windows xp prof... Not reading CD/DVD
Reference Dell vostro 1520 with windows xp prof... Unable to read & play any cd/dvd.tried mr.fixit content but no solution at the moment.
Hello
1 have. what fixit you tried?
2. don't you make changes to the computer before the show?Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116Important: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in the window.
-
Reference Dell MD3200i correct editing with IP system and the NIC for faster network speeds
Hi all
I worked on this project for a while now. I did a lot of research and have contacted Dell several times. I need help.
I have 2 sets of identical to use for Hyper-V clusters servers. We bought a Dell MD3200i in November, we also bought a Dell 5424 switch and a Cisco SLM2048 switch. These servers have Real Tek 2 network cards for iSCSI Jumbo frames is 9 k
The Dell MD3200i is two SAN controllers. Dell 5424 is the iSCSI optimized switch and Cisco is a 48 switch ports. iSCSI is on its own network that nothing else is connected to it. (There is an Iomega NAS and a promise Vtrak SAN Tech with all current domain of execution with iSCSI controller)
Reference Dell MD3200i controller 0 Port 0 192.168.130.101 controller 1 Port 0 192.168.131.101
Controller controller Port 1 0 192.168.130.102 1 1 192.168.131.102
Controller controller Port 2 0 192.168.130.103 1 2 192.168.131.103
Controller controller Port 3 0 192.168.130.103 1-3 192.168.131.104
Cisco switch has 1 VLAN n ° 1 on it and the 130 subnet inside elements. There are 8 connections to the switch. 4 controller 0 and 1 of each of the servers. It has an IP of 192.168.132.4, but that switch IP does not make difference. Lighted Jumbo frames
Dell switch has 2 of #1 for various things such as the domain controller, Vtrack, and SIN. Subnet 2 is 131 and has a total of 8 connectors inside. 4 in 1 controller and 1 from each of the servers. Lighted Jumbo frames. The switch IP address is 192.168.132.2
Groups of servers. Each server node running Windows 2008 R2 SP1 and running hyper-v with virtual server clusters / storage folder on them. 2 Realtek NIC with Jumbo frames made 9 k ProdNode1 and ProdNode2 have 12 Core i7 CPU with 12 GB memory, EXNode1 and ExNode2 have 12 Core i7 CPU with 24 GB of memory.
ProdNode1 iSCSI-1 192.168.130.110 ProdNode1 iSCSI-2 192.168.131.110
ProdNode2 iSCSI-1 192.168.130.120 ProdNode2 iSCSI-2 192.168.131.120
ExNode1 iSCSI-1 192.168.130.130 ExNode1 iSCSI-2 192.168.131.130
ExNode2 iSCSI-1 192.168.130.140 ExNode2 iSCSI-2 192.168.131.140
Portal discovery iSCSI on ProdNode1 went to 192.168.130.110 192.168.130.101 and 192.168.131.110 192.168.131.101 each of the other servers Discovery Portal have been pairs like this.
iSCSI tab click on add 8 MPIO sessions at each of the ports on the MD3200i from Dell, target. For example, I added 1 session of 192.168.130.101 using it. Add Session,--> activate--> Advanced Mutlipath--> Local--> IP 192.168.130.110 initiator and target 192.168.131.101 iSCSI adapter. This is repeated on all servers. 4 connections for each NIC.
The network is very slow. It revolved around 2 to 4 MB/MIN and it should be much faster. Initially, we had only the Cisco switch with only 1 VLAN and everything connected directly to it. I read somewhere that MPIO has been the problem, so I went through the same configuration but does not verify the MPIO checkbox above. Once this has been done, the network speed went up to 1.5 GB/Min but modular storage Dell was not happy, and virtual servers would fail and the connection is not very stable.
What wrong with my setup? Can I directly home and fix the servers directly to the PowerVault and will make stable and allow for failover and redundancy NIC? I need to get this stable so I can move with something else.
Thank you Ron
You will need to change your system of intellectual property on this:
rbrambleEX-Node1 iSCSI-1 192.168.130.130EX-Node1 iSCSI-2 192.168.131.130EX-Node2 iSCSI-1 192.168.132.140EX-Node2 iSCSI-2 192.168.133.140Prod-Node1 iSCSI-1 192.168.130.10Prod-Node1 iSCSI-2 192.168.131.10Prod-Node2 iSCSI-1 192.168.132.20Prod-Node2 iSCSI-2 192.168.133.20Reference Dell MD3200iController 0 Port 0 - 192.168.130.101 Jumbo Frames 9KController 0 Port 1 - 192.168.131.101 Jumbo Frames 9KController 0 Port 2 - 192.168.132.101 Jumbo Frames 9KController 0 Port 3 - 192.168.133.101 Jumbo Frames 9KController 1 Port 0 - 192.168.130.102 Jumbo Frames 9KController Port 1 1 - 192.168.131.102 Jumbo Frames 9KController 1 Port 2 - 192.168.132.102 Jumbo Frames 9KController 1 Port 3 - 192.168.133.102 Jumbo Frames 9KYour iSCSI sessions will be:
For EX-Node1:
-192.168.130.130 to 192.168.130.101
-192.168.130.130 to 192.168.130.102
-192.168.131.130 to 192.168.131.101
-192.168.131.130 to 192.168.131.102
For EX-Node2:
-192.168.132.140 to 192.168.132.101
-192.168.132.140 to 192.168.132.102
-192.168.133.140 to 192.168.133.101
-192.168.133.140 to 192.168.133.102
For Prod-Node1:
-192.168.130.10 to 192.168.130.101
-192.168.130.10 to 192.168.130.102
-192.168.131.10 to 192.168.131.101
-192.168.131.10 to 192.168.131.102
For Prod-Node2:
-192.168.132.20 to 192.168.132.101
-192.168.132.20 to 192.168.132.102
-192.168.133.20 to 192.168.133.101
-192.168.133.20 to 192.168.133.102
Maybe you are looking for
-
No matter what I can not import bookmarks from Safari 5.1
I tried exporting bookmarks in Safari under html, remove all Tags and Tags. I tried simply "import data from another browser. Nothing I try works. Are there any other title tags I need to delete?
-
help me to build a table as follows
Hello. I built a table with number 10 in all positions of the table. For example, if the table is sized 10 x 10, number 10 must appear in 100 positions in the table. But I need that number will store in the array as follows: which store number 10 in
-
bought 3 days ago. I installed it with a lan cable to a router as a network printer. The printer works fine and printing connect 2 computers. I tried to connect to web services according to the instructions, activated on 10.0.0.1. To start with the c
-
How to prevent the automatic upgrade for Windows 10
Press reports say that Microsoft will 'soon' 10 Windows upgrade recommended for Windows 7, leading to the automatic download and installation. I don't want that. I have upgraded to Windows 10, then returned to 7 (leaving an extra 100 GB of somethin
-
How to show a PIN with a custom on mapview icon?
I use the following code to add a PIN, the card appears but the PIN does not appear. Tested on a real 10.1 Z10. GeoLocation *pin = new GeoLocation(lat, lon, mapview); pin->setName("somename"); pin->setDescription("some description"); Marker marker; m