LaserJet m127fn

Similar Questions

• HP LaserJet M127fn MFP pro: printer works is not after a few days

  Hello I have a printer model: HP LaserJet MFP M127fn pro

  I installed the software and drivers and the printer works perfectly well for a few days and then stops working. I have then uninstall and reinstall the drivers working yet and only a few more days...

  Someone please guide what to do...

  Thank you

  Hi!, guy36:

  Please see... http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Introduction

  Step 1

  Step 2

  Step 3

• LaserJet M127fn MFP Pro: Printer not connected

  Hi all trying in vain to connect the printer to a wireless router. USB connection to the router; router, Asus DSL N55U; configuration of the router page lists the active printer. That's all. Printer shows on self-esteem / Test as "unrelated", no IP address. What can I do to connect? Thank you very much for your time.

  I have this issue sorted by myself earlier today. Here's what I did. I have reset the printer by cutting the power supply and leave it unplugged for a few minutes. I've deleted all the software my laptop prnter installled. As opposed to the connection via USB, I connected through the ethernet on the printer port to one of the four ethernet ports on my router. Then I powered and immediately noticed a light on the router indicated connection through one of the ethernet ports. My wife came running downstairs to tell me that she could see the printer listed on his iPhone. After a few minutes, I ran a report of connectivity, and it showed connection and TCP/IP connection details. I then installed the software. I am happy to say that he works all famous and we are happy campers.

  Thanks for your help.

• m127fn

  I just bought a Laserjet M127fn today,

  the seller said that this all-in-one could receive faxes on PC, but I could not find with the setting,

  LaserJet M127fn can really receive fax on my pc (without printing)? If yes then where can I find the settings?

  Thank you.

  You will need to completely install the full software and drivers from the disc that came with your LaserJet printing device

• M127fn: m127fn

  I bought a printer-fax-copy-scan model M127fn

  My problem is to receive faxes. When I'm not at the office, the fax will look to stay - after an hour and it receives no fax machine when he's on the stand-by. would you please help my how to solve this problem, how I set the fax system, do not go to stand-by

  My email: [removed personal information]

  Hey @mohbon,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the reception of faxes on your Laserjet M127fn printer range. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to solve problems of fax with your printer.

  Please let me know if after the above allows you to receive faxes. If so, please click on accept solution. If you appreciate my help please click the thumbs up icon. The two icons are below this post.

• laser jet pro printer MFP M127fn newly installed cannot connect to the wireless network

  I just bought the printer [all in one].  I initially put in place by using the CD that came with it and a USB cable.  Then downloaded the update from Apple software, following the instructions, but cannot follow the instructions online.  I can't find the menu on Control Panel wireless.  It is not upward under Network Configuration.

  Hello

  The HP Laserjet M127fn is not a wireless printer (model M127fw however provide wireless capabilities), it supports only wired network connection, as you can find below in the connectivity section:

  http://support.HP.com/us-en/document/c03898081

  Jean-François

• Laser Jet MFP M127fx Pro: How to access newspapers on Laser Jet Pro MFP M127fx Fax

  I had printer all in one for a while and I did not understand how to access a Fax log for the summary activity. This capability is a feature of this product, and if yes, how can I access it?

  Hi tdegnon,

  Sorry, I don't have menu for the Laserjet M127fw Laserjet M127fn structure.

  In your Menu Reports, print the Structure of the Menu and you should see one called Fax reports can Fax activity log. Print now or Auto Log print.

  Your model has the LCD screen or a touch screen?

  Let me know how make you out.

  Thank you.

• M127fn LaserJet MFP Pro: Hp Laserjet help

  
  

  https://h30434.www3.HP.com/T5/LaserJet-printing/HP-LaserJet-Pro-MFP-M127fn-beep/m-p/5099750

• HP LaserJet MFP M127fn Pro: No option to scan/administration in HP LaserJet MFP M127fn Pro

  Hello

  We just purchased the MFP HP LaserJet Pro M127fn, and after reviewing several videos from HP support, he showed that all of the devices in the Laserjet Pro should support the scan to network folder option.

  I've updated the device to the latest firmware, performed a hard reset on the device, and yet I can't get the Scan option to work at all.

  I should clarify that the unit is configured via the IP network, I can log in, feel to it (the fax will not be used at all), but the requirement of the majority of this device is to analyze the files.

  I need this feature to support scanning directly to the network (without the need to run the software on a machine to make the scan).

  I have re-installed the download pack full pilot time on the CD, but also the drivers download site, and little matter what I do, I get not the scan configures network folder option. I have only the HP scan option (which is essentially useless to me).

  If the Scan to network folder is unavailable for this device, I need to know that.

  Thank you in advance,

  Oliver

  So I decided to call HP Business Support... what a waste of time udder.

  Because I connect this device via the network through a switch, they cannot support this configuration... uh what?

  I then asked, this devices support analysis to the network option, she did some research, and it came back as not supported.

  So, despite site Web HP's own ( http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03953940 ) saying that all LaserJet PRO devices are supported, this turns out not to be the case at all.

  So either HP is clearly on their products, or their business support is frankly stupid, that they have no idea how to do to resolve their own devices.

  Needless to say, it returned, and I'll go with one of the competitors of HP. Just dumb business.

• HP LaserJet Pro M127fn: Can not scan to e-mail.

  HP LaserJet PRO M127FN

  Hello

  as the topic says I have problem with my beloved printer...

  It is a product that I bought because the seller told me that it can scan without a PC. It's wery useful function so he convinced me to this purchase. But when I got home I was surprised wery when discovered lacks Scan to email in the menu structure.

  As the former owner of the brother device, I could download the firmware with the i - fax feature. He did well with brother to fill that empty space S2E.

  My question is - > don't have the device whose operation hidden somewhere or I can download the firmware to have?

  I would like to know if anyone of you has a solution to this problem.

  Hello @DRevan,

  Welcome to the Forums of HP's Support. I understand that you have a new printer Laserjet. I would like to respond to your analysis to the question by e-mail.

  The HP LaserJet Pro m127FN does not support scanning to e-mail.

  The HP LaserJet Pro m127FW supports scanning to e-mail.

  I don't think the seller you have lied. He was probably talking about the 127fw and accidentally sold you the 127dn instead. Or maybe did not know there was a difference between the two.

  Hope this helps you. If you have any other questions, feel free to ask.

• Adjust the Date and time on the HP LaserJet MFP M127fn Pro?

  Hello

  Someone knows how to change the time on a LaserJet MFP M127fn Pro?

  Thanks in advance!

  Sean

  .

  Hi @SeanKaneFLA ,

  I see by your post that you would like to know how to change the date and time on the printer. I would like to help you today.

  This information was given by the manual on page 45. MFP LASERJET PRO.

  You may have configured these settings when you installed the software. You can configure these settings
  at any time by using the control of product or the HP Fax Setup Wizard panel.

  LCD control panel:
  1. on the product control panel, press the Setup button.
  2. Select the System Configuration and then select Date/time.
  3. Select the clock in 12-hour or 24-hour format.
  4. use the keypad to enter the current time and press the OK button.
  5 Select the date format.
  6 use the keypad to enter the current date and then press the OK button.
  7. Select Fax Setup, and then click Fax header.
  8 use the keypad to enter your fax number and press the OK button.
  NOTE: The maximum number of characters for the fax number is 20.
  9. use the keyboard to enter your company name or header and press the OK button.
  NOTE: The maximum number of characters for the fax header is 40.

  (Windows) HP Fax Setup Wizard

  1. click on start and then click programs.
  2. click HP, click the name of the product, and then click Fax Configuration Wizard.
  3. follow the on-screen instructions to configure fax settings.

  I hope this helps.

  Good day!
  Thank you.

• HP Laserjet MFP M127fn Pro: Cannot install drivers for printer HP Laserjet Pro MFP computer M127fn on the new laptop from acer windows 10

  This is my third attempt failed to install new drivers for the Laserjet Pro M127fn MFP printer on my laptop Acer windows 10 OEM. I used the HP installer with no customiztion of components (the default recommended) with USB cable connection. It goes up to the product configuration step 99% and then gives the error: "an installation operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run Setup again. If the problem persists please consult product suppprt web site of your product... » »

  I also tried to use interface devices and printers after restart the computer by selecting Add Printer option, it seemed to have installed the printer but it couldn't print the test page. Any help will be greatly appreciated.

  Thank you.

  Hello

  Printer navigate through the Setup menu using the left and right arrows and locate the Service menu.

  Search for HP Smart Install option in the Service menu (it may appear and may not be no depanding on the version of your printer), if it is there, select Disable for HP Scmart Install.

  In your PC click on the right button on the start menu and select Control Panel, then select View devices and printers.

  Do not forget to remove any icon (the M127 or any other driver HP) HP printer by clicking the icon and selecting Remove the device, and then restart the computer.

  Go back to the devices and printers any queue remains left by clicking once, then select press the print server properties in the top menu bar.

  Select any listed HP printer driver and select Remove, make sure to select the 2nd option to delete the printer and its driver package.

  From the control panel home, type "change device Installation settings and open the option, then select No and confirm with OK."

  Now, try to reinstall the most recent drivers and check for the difference.

• HP LaserJet Pro M127fn MFP

  Has the HP LaserJet Pro MFP M127fn for about a week for business, now will not print fax rec'd, shows message 'Memory Supply warning', how do I fix this, please help, thank you.

  Hello, supplies message usually indicates a toner low capacity.  The following information shows how to adjust the low setting and please keep in mind that once the cartridge is really a reduction in qualitty impression will be visible on all printed pages.  The toner cartridge (s) will be replaced.  On Control Panel press the key icon (installation) - printers cartridge of SUST select settings-select power settings-black - very low setting - continue.  This replaces the weak message and allow printing.  The long-term solution is to replace the cartridge.

• LASERJET PRO M127FN MFP: MFP M127 FN

  Hello!
  24 hours ago becomes owner of a M127FN MFP of LASERJET PRO and when I plugged it to the power cord the two layers display lights not on
  and I can't see the messages without outdoor light
  Can someone tel me why lighting of the screen does not work and what I can do?

  Thank you in advance.

  I wish to inform you that, finally after understanding of my issue the HP company gave me a solution, by replacing my MFP M127fn device with a reconditioned nine M225dw MFP unit.

  I want to thank you for the transfer of my question to the attention of a team of HP appropriate and I would like to thank HP for the satisfactory solution which gave me.

• HP LaserJet Pro M127fn MFP: Automatic document feeder does not detect documents loaded on it

  Hello

  I use all of this in one previous machine a few months. Since the last two weeks than its automatic document feeder is not detect documents loaded on it, while it is perfectly flat scanner scanning and printing as well. This machine is connected via a usb cable. I tried all the troubleshooting options available including resetting the printer, cleaning ADF etc etc sensors I also tried the update the bios of the printer, but it does not work for me and feeder is constantly unable to detect documents loaded on it. I searched the whole forum but did not find any message an answer fast and good, therefore, will be highly appreciated in this regard. Thank you

  Hey @Mohsan_IT,

  Welcome to the Forums of HP Support!

  I would like to help you today to address the issue of automatic documents feeder sensor you encounter on your HP LaserJet Pro MFP M127fn. Please include all the troubleshooting steps that you received before you reach out for support. Right now, you have completed all the troubleshooting steps supported in your efforts to solve this problem. If you want to confirm that everything was done correctly, please see the following two positions:

  • Can not copy or scan of FDA (autofeed) on LaserJet 127fn MFP
  • ADF works does not in all new Pro LaserJet MFP M127-M128

  All steps in the discussions that I provided above must be made without success, then the last step would be to perform the programming reset NVRAM on your printer. Now I will send you a private Message with instructions on how to reset the NVRAM. Please check your private Messages for instructions.

  Good luck!