(Redirected) Windows 10 problem

Similar Questions

• Satellite A135-S4527 - Windows encountered problem & fails to load

  At startup, Windows attempts to load, but I get the message Windows encountered problem communicating with a device. Windows does not load.
  Tried all attempts for load in SafeMode etc but no luck. Tried to load the Toshiba Recovery utility but still no luck.

  Fortunately the data is saved, but I have no recovery disks.

  How can I get the recovery disc for this machine for delivery here in the United Kingdom when it is a product of the USA?
  If the recovery discs can be ordered in the United States where to order? (I have an address to the United States for delivery if necessary).

  Hello

  As far as I know here in Europe, you will not be able to recovery media order for the laptop models to the United States. If you have a person in the United States, they must contact the nearest authorized service provider and order it for you. Later they send it to you.

  If you need to address and http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Repair&sn=false check phone numbers

  Good bye

• p6310f: Windows Update problem

  When you try to upgrade to windows 10 I received the error message 0 x 80080005 - 0 x 90016 after watching in Microsoft support forum, I found that the problem was related to windows 7 is not not to date. I checked and found that my computer has stopped udating a couple of years. I tried to run Fixit MS that has not worked. Tried to reboot (BITS) and got ERROR 126 (module not found) I then followed the instructions at https://support.microsoft.com/en-us/kb/2700567 on how to reset the Windows Update components. During the process, I have the following errors:

  Mshtml.DLL loaded, but the dllregisterserver entry point was not found.

  Shdocvw.dll "" ""

  browseui.dll   "                "                    "                     "

  MSXML.dll Module could not load make sure that binary is stored at the specified location the specified module could not be found.

  Actprxy.dll Failed is not found

  gpkcsp.dll        "        "           "             "

  initpki.dll          "           "                 "

  wuaueng1.dll"" "

  c:\windows\system32\dllcache\wucltui.dll"" "

  wuweb.dll      "            "           "              "

  muweb.dll    "            "              "            "

  I guess my question is what I have to do a restore of the system under windows 7, before I can upgrade to windows 10? Or y at - it another way?

  Hello glockrow ;
  
  Let me welcome you on the HP forums!
  
  I read your post about windows update problems and wanted to help.
  
  I would that be able to say that updating to Win10 was an exact science where we know exactly how he does it, and what it should - but the flooding of this and other instances of Win10 problem after that problem indicates that, at best, we are all guessing.

  So, I think, from what I've read and done on my PC, is that you SHOULD be able to avoid the problem of missing updates by updating using Win10 created using this MS link media: 10 Windows Installer using the media - Windows help authoring tool

  After you create the DVD or USB, NOT boot from it. Instead, insert it into your PC and, if it does not auto-start, right click on the file setup.exe and run it.

  HOWEVER - and this is important - PC Win7 have a rate low success updated Win10 without problem - primariluy lack of OEM Win10 drivers.  Typical problems include display artifacts (to cause to be obliged to use the driver for the card of Microsoft Basic), not wireless and touchpad problems.  The drivers Microsoft provides have only the most basic features, with none of the extras that the HP drivers bring to the stage.

  It is further complicated by the function Win10 GoBack, whereby you can return to your original operating system, being known to be unreliable. So when your upgrade machine malfunctioning, only then you discover that you cannot return the machine to work, that you had originally!

  You can protect yourself against ending up with a damaged machine - seriously considering using a free third-party product that works for airport Imaging/restoration - Macrium Reflect.
  
  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.
  
  So now you can recharge before with the upgrade, knowing that whatever happens, you will be able to return to your currently works in a few minutes.
  
  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Windows 7 - problem 'says that my laptop was inconsistent.

  Original title: Windows 7 problem.

  At this moment, I have problems with Microsoft. A message to see if my laptop was ready for Windows 7. When I tried another message came to say that my laptop was inconsistent and that I should check my internet and try again later. My internet is OK. Please help me, I'm missing out on a lot.

  Hello

  Start the computer in safe mode with network, run Windows 7 Upgrade Advisor and check the status of the issue.

  To start the computer in safe mode with network.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Please let us know if you need more assistance.

• Error Windows Update problem "don't shut down your computer updates being configured"

  OT: Windows Update problem.

  Why should I continue to get the message ' don't shut down your computer updates being configured "where all the updates seem to have been installed?

  Start here (ignore the title): http://support.microsoft.com/kb/949358

• KB2676562 error 80070490 Windows update problem

  original title: Windows Update problem

  I'm unable to install the "Security Update for Windows Vista (KB2676562)."  I get the error "80070490."   I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.

  I'm unable to install the "Security Update for Windows Vista (KB2676562)."  I get the error "80070490."   I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.

  Have you tried everything in this article: http://support.microsoft.com/kb/958044

  Method 1: run (Checksur.exe) system update readiness tool

  If this method does not resolve the problem, go to method 2.

  Method 2: perform a Windows repair installation

• Active window color problem - cannot change the background color

  original title: Active window color problem

  By right-clicking: Desktop, then click on: personalization / window color and appearance / settings (Advanced) appearance, Windows user can assign a background color of the active window in any application.  This is useful for those of us who don't want a stark white screen; We can assign a mild pastel tint which may be easier on the eyes for long term sessions.

  At some recent point, I lost the background color of the active window within Windows uses 'household.  I still not my background color assigned in any application I run (Word, Mail, etc.), but using Windows Explorer to navigate through my hard drive, the active window is now always the default stark white Windows.  How this change and can it be forced to adhere to the assigned active window background color?

  Hello

  Step 1: Check if the problem continues in a new user account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-user-account

  Step 2: If the problem does not persist in a new user account, then the old profile could have been corrupted. Try the following article to fix a corrupted user profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• When I try to use the Skype window having problem

  When I try to use the Skype window having problem

  Hello

  you don't say what problem?

  and if the problem only occurs when using Skype, ask the Support of Skype

  https://support.Skype.com/en/

• Windows Update problem - 0 * 80070005

  * Original title: windows update problem

  I'm not get windows updates.so I run the program update troubleshooter.in windows he showed the error of update problem as... windows 0 * 80070005 (2016_05_17_T_06_03_42P) .and this problem was not fixed. and again, I have no answer answer.pl.

  First of all

  KB3138612 would be the last for a manual installation

  The first would actually KB3145739

  Homepage for all versions,

  https://TechNet.Microsoft.com/library/security/MS16-039

  After that you manually install you KB3153199

  I would also like to before doing this,

  Be sure and go to uninstall a program and see which Microsoft Net framework you have installed.

  4.5.2 is more consistent to have installed,

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=42642

• Windows Update problems 0x8024a005

  problems of updating Windows 7 every time I try to update I get error 0x8024a005 next

  OT:

  Windows Update problems

  Try the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  (The steps # 1 a, 1 b, 1 c, 1 d and 1e)

  Disable third-party firewalls.

  Also: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/win-7-updates-keep-repeating/12ecb219-c374-e011-8dfc-68b599b31bf5

  J W Stuart: http://www.pagestart.com

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• Windows 10 problems

  Windows 10 says it is ready to install, but when I click on the blue screen goes away and nothing happens.

  Hi Daniel,.

  Restart the computer and check.

  Try to run the Windows Update Troubleshooter and check.

  The problems with the installation of the updates:

  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-8

  Problems with your upgrade to Windows 10? Get help here:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-windows_install/Windows-10-upgrade/6493e352-B300-4ec8-bb99-c8c0a3a01c1c

  Get help with Windows 10 installation and upgrade mistakes:

  http://Windows.Microsoft.com/en-us/Windows-10/upgrade-install-errors-Windows-10

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

• To the PSE11 windows 8 category PSE6/windows vista: problem catalog conversion

  Hello. I saved my PSE6 on external hard drive (I optimized/repaired before saving) and then installed PSE11 on the new 8 pc windows - no problem. Followed all the advice, I have seen/read to convert saved PSE6 catalog but doesn't seem to find (I tried custom location / browse and go to the folder where the backup is saved, but it just says: "no file matching your search").

  I then tried to install PSE6 on new computer restored catalogue him, then looked for the catalogue still in PSE11. It seemed now to find and convert, but some files where missing and a lot of keywords/tags as missing.

  I tried to uninstall the lot (including the removal of the files in the files they were saved in the new computer) and after looking at the Forum, tried to backup old PSE6 on old pc again, but this time the first saved metadata on files and then sustained upward (took HOURS!) Reinstalled PSE11 on the new computer and tried - back to the first problem - does not "see" the backup, even if I know it's there (there is a .tly file, etc.).

  I don't really want two versions of the PSE on the new PC and I REALLY don't want to have to start from scratch all 5000 marking files! I hope someone can help and tell me what I'm missing. I certainly not a seasoned PSE user, mainly due to lack of time and started with PSE6 knowing nothing at all. Am hoping to have more time to use PSE as I will work from home, but I just spent the major part of 2 days trying to figure this...

  Yes, of course. Please check that you check the box corresponding to the maintenance of the folder hierarchy.

  Thank you

  Catherine

• (Redirected) 10 Windows installation problems.

  I'm having the problem of installation for Windows 10.  I have an Inspiron 15 3521.   I download Windows 10 and start the installation. Then download the message, it cannot update the reserved partition.  When I open the Disk Manager I can't find reserved partition. I tried several programs to extend the partition of the reserve, but in vain. Does anyone have any suggestions?

  Hi mr1woody,

  Please repost this in the software and the operating system, Windows 10 forum help.

  http://en.community.Dell.com/support-forums/software-OS/f/4997

• Windows Firewall problem - unable to start service. [FIXED]

  THIS PROBLEM HAS BEEN FIXED! Thank you! SEE MY LAST POST FOR MORE DETAILS.

  I am running Windows 7 Professional 64 bit. I use Malwarebytes' Anti-Malware for a while and we had no problems with the software.

  I tried to start the Windows Firewall service for the last couple days. After some research (with no response), I tried several steps.

  Evertime I try to turn on the Windows Firewall through Control Panel, I get this error:

  "Windows Firewall cannot change some of your settings.

  0x8007042c error code. »

  First, I checked the Services. This is what I found.

  -Windows Firewall (automatic)

  -Engine of Filtring basis (Auto)
  -Windows Firewall authorization driver (missing)

  Then I tried sfc/scannow in a prompt (run as administrator). This was the result.

  "Start system analysis.  This process will take time.

  Start of the phase of verification of the scanning system.
  Full check of 100%.

  Windows resource protection found no violation of integrity. »

  Then, I went in the management of the computer and found that Windows Firewall authorization driver has a yellow top brand scream icon. Right click and clicking on properties gave this:

  Under the general tab:

  Device type: drivers Non Plug-and-Play

  Manufacturer: unknown

  Loactaion: unknown

  Status of the device: this device is not present, is not working properly or is not all its drivers installed. (Code 24)

  Driver tab:

  Service name: mpsdrv

  Full name: Firewall Windows Driver authorization

  Current situation: Decree (cannot be started)

  Type: request

  Driver details:

  Driver files:

  C:\Windows\system32\drivers\mpsdrv.sys

  Provider of: microsoft Corporation

  File version: 6.1.7600.16358 (win7_rtm.090713 - 1255)

  This error appears whenever I try to start the Windows Firewall authorization diver:

  "The system has encountered the following error trying to start the service.

  Cannot create a file when that file already exists. »

  Then I tried these commands in the same command prompt, with the results listed after each command:

  netsh advfirewall reset

  Unable to load the programme of assistance following DLL: WSHELPER. DLL.

  An error occurred while trying to contact the Windows Firewall service. Make sure that the service is running, then try your request again.

  net start mpsdrv

  183 system error has occurred.

  Cannot create a file when that file already exists.

  net start bfe

  The requested service has already been started.

  More help is available by typing NET HELPMSG 2182.

  net start mpssvc

  Error 1068 the system has occurred.

  The dependency service or group was able to start.

  regsvr32 firewallapi.dll

  DllRegisterServer in successful firewallapi.dll.

  I also tried "regsvr32 wshelper.dll" and got the following error message:

  The "wshelper.dll" failed to load module.

  Make sure the binary is stored at the specified location or

  the debug to check for problems with the binary or

  dependent. DLL files.

  The specified procedure could not be found.

  I have found wshelper.dll in C:\Windows\System32 (20KO) and folders C:\Windows\SysWOW64 (15KO), as mpsdrv.sys in the folder C:\Windows\System32\drivers (75.5 KB).

  It is all the information that I recall gathering at this time.

  If a similar problem like this has been asked and answered, please point me in the right direction.

  -Thank you.

  Thank you all, but I got it working again. It seems to be related to the Google redirect virus. I downloaded ComboFix and it got rid of the problem.

  Thank you guys for your answers.