Windows Update problem - 0 * 80070005

Similar Questions

• p6310f: Windows Update problem

  When you try to upgrade to windows 10 I received the error message 0 x 80080005 - 0 x 90016 after watching in Microsoft support forum, I found that the problem was related to windows 7 is not not to date. I checked and found that my computer has stopped udating a couple of years. I tried to run Fixit MS that has not worked. Tried to reboot (BITS) and got ERROR 126 (module not found) I then followed the instructions at https://support.microsoft.com/en-us/kb/2700567 on how to reset the Windows Update components. During the process, I have the following errors:

  Mshtml.DLL loaded, but the dllregisterserver entry point was not found.

  Shdocvw.dll "" ""

  browseui.dll   "                "                    "                     "

  MSXML.dll Module could not load make sure that binary is stored at the specified location the specified module could not be found.

  Actprxy.dll Failed is not found

  gpkcsp.dll        "        "           "             "

  initpki.dll          "           "                 "

  wuaueng1.dll"" "

  c:\windows\system32\dllcache\wucltui.dll"" "

  wuweb.dll      "            "           "              "

  muweb.dll    "            "              "            "

  I guess my question is what I have to do a restore of the system under windows 7, before I can upgrade to windows 10? Or y at - it another way?

  Hello glockrow ;
  
  Let me welcome you on the HP forums!
  
  I read your post about windows update problems and wanted to help.
  
  I would that be able to say that updating to Win10 was an exact science where we know exactly how he does it, and what it should - but the flooding of this and other instances of Win10 problem after that problem indicates that, at best, we are all guessing.

  So, I think, from what I've read and done on my PC, is that you SHOULD be able to avoid the problem of missing updates by updating using Win10 created using this MS link media: 10 Windows Installer using the media - Windows help authoring tool

  After you create the DVD or USB, NOT boot from it. Instead, insert it into your PC and, if it does not auto-start, right click on the file setup.exe and run it.

  HOWEVER - and this is important - PC Win7 have a rate low success updated Win10 without problem - primariluy lack of OEM Win10 drivers.  Typical problems include display artifacts (to cause to be obliged to use the driver for the card of Microsoft Basic), not wireless and touchpad problems.  The drivers Microsoft provides have only the most basic features, with none of the extras that the HP drivers bring to the stage.

  It is further complicated by the function Win10 GoBack, whereby you can return to your original operating system, being known to be unreliable. So when your upgrade machine malfunctioning, only then you discover that you cannot return the machine to work, that you had originally!

  You can protect yourself against ending up with a damaged machine - seriously considering using a free third-party product that works for airport Imaging/restoration - Macrium Reflect.
  
  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.
  
  So now you can recharge before with the upgrade, knowing that whatever happens, you will be able to return to your currently works in a few minutes.
  
  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Error Windows Update problem "don't shut down your computer updates being configured"

  OT: Windows Update problem.

  Why should I continue to get the message ' don't shut down your computer updates being configured "where all the updates seem to have been installed?

  Start here (ignore the title): http://support.microsoft.com/kb/949358

• KB2676562 error 80070490 Windows update problem

  original title: Windows Update problem

  I'm unable to install the "Security Update for Windows Vista (KB2676562)."  I get the error "80070490."   I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.

  I'm unable to install the "Security Update for Windows Vista (KB2676562)."  I get the error "80070490."   I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.

  Have you tried everything in this article: http://support.microsoft.com/kb/958044

  Method 1: run (Checksur.exe) system update readiness tool

  If this method does not resolve the problem, go to method 2.

  Method 2: perform a Windows repair installation

• Windows Update problems 0x8024a005

  problems of updating Windows 7 every time I try to update I get error 0x8024a005 next

  OT:

  Windows Update problems

  Try the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  (The steps # 1 a, 1 b, 1 c, 1 d and 1e)

  Disable third-party firewalls.

  Also: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/win-7-updates-keep-repeating/12ecb219-c374-e011-8dfc-68b599b31bf5

  J W Stuart: http://www.pagestart.com

• Recent Windows Update problem, 80070005 error code

  My computer is running windows update without problems so far. For the last week or two, my computer tried to install the following updates:

  Update security for Windows Vista (KB969947)
  Update security for Windows Vista (KB973565)
  Update for Windows Mail Junk e-mail filter [November 2009] (KB905866)

  After each attempt, the updates fail with the error code 80070005. After that my computer keeps on reminding me to install important updates, that I am unable to do.

  I tried:
  1. disable the Antivirus software and Windows Defender firewall. Perform the reboot and installation manual
  2 disable the update of windows, rename the software distribution folder, enable windows update, restart
  3. I followed the procedure described by Savan-H described here
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/29d7f9d1-56cd-42f3-bd44-7de8448ef70e/
  I arrived in #5 to step 3 and after you run the code given in the cmd prompt, I get this error
     
  WARNING: Unable to set SeSecurityPrivilege privilege. This privilege may be required.
  OpenSCManager error: access denied

  WARNING: /sddl = da; CCLCSWRPWPDTLOCRRC; SY)(a;; ccdclcswrpwpdtlocrsdrcwdwo;;) BA)(a;;) CCLCSWLOCRRC; to the)(a;; cclcswrpwpdtlocrrc;; unité centrale): no previous object open

  All these attempts were dead ends and I still cannot update my pc. It continues with 80070005 error. I would appreciate any help on this matter.

  Kind regards
  Atom

  Hello

  It is a very difficult to solve.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Description of the system update for Windows Vista, for Windows Server 2008 analytical tool, for
  Windows Server 2008 R2 Release Candidate for Windows 7 Release candidate
  http://support.Microsoft.com/kb/947821

  Those are kind of prerequisites and probably will not solve the problem.

  Products of security/antivirus/antispyware are a known cause, so you can turn them off like
  as the test (and that sometimes not really totally removes their influence).

  How to restore the security settings the default settings?
  http://support.Microsoft.com/kb/313222

  Error message when you use Microsoft Update or Windows Update Web sites to install updates on
  Windows 2000, Windows XP and Windows Server 2003: 0 x 80070005
  http://support.Microsoft.com/kb/968003/

  Its usually a permissions problem:

  Please check this link and those that he sites.

  Work your way through my 3 posts here.
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/200f5140-c2dd-48a5-8CDB-0d8c82ade3cf

  -----------------------------------------------------

  You can also try a manual installation:

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Cannot download Windows updates: error code 80070005

  Impossible to download the windows error code 80070005 updates always prevents update. Any help would be great

  Thank you

  Hello

  • Update that you are trying to install?
  • When exactly do you get this error message?

  You can use the following methods that can help you solve your problem:

  Method 1:

  You can try to reset the Windows Update components and then try to install the updates and check what is happening. You must follow the link provided below to run the fixit which will automatically fix the problem if you find problems with the fixit, then you can follow the procedure to manually reset Windows component update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/default.aspx/KB/971058

  Method 2:

  You can also try to temporarily disable the security software and check if that helps, you can update Windows.

  Follow the link given below for more information on changing the settings the same.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  See also:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-error-0x80070005-need-a-fix-click/e4cb8700-F215-4F1A-8bd4-6457ac619c19

• Windows Update error code 80070005 in windows vista

  Original title: error code 80070005

  I have problems with the last batch of updates - I get a code error 80070005.  Please help if you can.  Mark

  Hello

  1 did you change on your computer before this problem?

  Error code 80070005 means generally that you're not quite allowed to install updates.

  All first please confirm that you have logged on to an account with administrative privileges.

  You can follow the methods below and see if it works very well.

  Method 1

  You can reset Windows Update components and see if it works fine.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Method 2

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  Method 3

  You can follow the steps in the article below.

  Error message when you use Microsoft Update or Windows Update Web sites to install updates on Windows 2000, Windows XP and Windows Server 2003: 0 x 80070005
  http://support.Microsoft.com/kb/968003/

• Satellite L650 - 11Z - Windows update problem 800706BE/800706BA

  Hey,.

  I have problems with the automatic update on windows 7 64 bit. I bought this laptop (Toshiba Satellite L650 - 11Z) last July.

  When the computer begins to do the automatic update, there a while and reports the problems mentioned in the subject.

  I tried to find help for Windows support, but there is a statement, that if windows is installed in the laptop before buying it, I should consult the producer of the computer.

  Matias

  Hello

  I found this info on the 800706BE error:
  + Error 800706BA is a standard Windows error with many causes. It more often refers to Microsoft COM Internet Services (CIS) on the call of client DCOM Distributed Component Object Model (RPC_S_SERVER_UNAVAILABLE); the RPC server is unavailable (Windows Event ID) 1722. That's when a RPC request expires and 800706BA error results. +

  I found this here:
  http://www.Symantec.com/business/support/index?page=content&ID=TECH54543

  Here are also a few details and proposals for solution of Microsoft:
  http://Windows.Microsoft.com/en-in/Windows7/Windows-Update-error-8024000B
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  Hope this helps

• HP Compaq laptop: windows update problems

  Hello

  Could someone help please, for the last few weeks where are updates of Windows security and I think that all is well I keep getting messages flashing up to say that updates could not be completed. This seems to be only on some of them, I'm not very tech savvy and have no idea how to do to fix this, it would be good if someone could tell me in simple terms how to overcome this problem.

  Thanks in advance

  John G

  Hi @Johnymac,

  Thank you for your response.

  What is your specific model of HP Compaq laptop?

  There is a link in my previous post to help you find this information.

  If you have a firewall (firewall of Windows example) make sure that Windows update is on the white list. You can also try disabling the firewall and retry the Windows Update to see if that helps.  If it do not forget to reactivate it later.

  Have you checked against viruses and malware?

  Microsoft offers also get help Windows 10.

  Microsoft Corporation / Customer Support

  1-800-642-7676

  Microsoft Support contact us

  Please keep me updated.

• y480 windows update problems

  so I just got this laptop and it the windows update keeps failing and its quite frustrating.

  so, every time I stopped it will download the updates and when I restart it it will try to configure everything, but it fails and go back to the old config and it will just continue to do what it is pretty frustrating, anyone have any ideas?

  Hello and welcome,

  Try this: Re: x 230 problem with config/system updates of windows

  Z.

• Windows Update problems - you must run Microsoft Internet Explorer 5 or later

  Whenever I try to go to windows update I get this

  Thank you for your interest to get updates of our site.

  To use this site, you must run Microsoft Internet Explorer 5 or later.

  To upgrade to the latest version of the browser, go to the website downloads of Internet Explorer.

  If you prefer to use another web browser, you can get updates from the Microsoft Download Center , or you can stay up to date with the latest reviews and updates using automatic updates. To turn on automatic updates:

  1. Click Startand then click Control Panel.
  2. Depending on which control panel view you use, classic or category, do one of the following:
     • Click System, and then click the automatic updates tab.
     • Click performance and Maintenance, click System, and then click the automatic updates tab.
  3. Click the option you want. Make sure that automatic updates is not turned off.

  am under explore 8 and it is updated. Is there any help out there for this? I'll be bald if I can't solve this problem quickly.

  I will try to reinstall the Windows Update Agent Installer.  Here is a link to the Microsoft site that explains how to do this: http://support.microsoft.com/kb/949104.

  Go to the section How to get the last agent to update as it is already installed.  Scroll down to the section on the additional information tab called Windows Vista, Windows Server 2008, Windows XP, Windows Server 2003 and Windows 2000 Service Pack 4 (I checked that it also works under Windows 7).   Choose one that fits your computer (x 86, x 64, Itanium).  Run this update and follow the instructions.  Windows Update will now be reinstalled, but it's a good idea to restart at this point.

  I hope this will solve your problem.

  Barbara

• Windows Update problems - reset windows update components - XP SP3

  have 3 computers in the House that was attacked recently.  2 that I have fixed.  It has been difficult.  Registry does not show same problem had 2 other computers. has run the virus scan and it crashes.  Cleaned hard drive. no help. automatic update of windows I tried and received the error 80072eff

  By section 971058.

  Attempt to auto-correct and received the error 80072eff.

  has set manually the registry and consisted of the following who do not register and I'm afraid to go forward with the process without further direction.  pls let me know how to handle this and or if I should proceed to the next steps in the manual registration process.

  Errors

  Mshtml.dll, but charged in DLLRegisterServer was not found;

  c:\windows\system32\wucltux.dll, LoadLibrary failed - specified module could not be found.

  c:\windows\system32\wuwebv.dll, LoadLibrary failed - specified module could not be found.

  all other dll registered very well.

  Next steps not yet made

  Your help and your tips are appreciated.

  You may encounter temporary connection [e.g. 0x80072EFF] errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  How to reset the Windows Update components?
  [Skip the section to APPLY to if Win7;] Access KB971058 via Internet Explorer (32-bit) only. Run the difficulty in DEFAULT and AGGRESSIVE modes, then restart]
  http://support.Microsoft.com/kb/971058

• Windows update PROBLEM - always needs to change first the file distribution system

  I am running with Windows Vista Home Basic Edition and are struggling to update my files after a clean reinstall.  Finally got through many strategies, but doing so thereafter (once) noticed that the failures occurred each time that the "System of Distribution" file in the windows folder has not had been empty of logs and the previous downloads.  Don't know what that means.  Any ideas?  Could there be a problem with the hard drive, processor, motherboard, short circuit? (Have no problems downloading on other computers in my house, my overall connection is good).

  Thank you.

  Hi Loraoshea,

  You can read the following article and try to reset the Windows Update components and check if it helps.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Download Windows Update problems

  Why when I try to download updates windows for microsoft .net framework downloads what they continually fail? Security for 2.0 update and Service Pack updates for the Microsoft.NET Framework 3.5 updates keep fault!

  Hi JaiB,

  ·         What version of Windows is installed on your computer?

  ·         Who is the update (KB Article) you are trying to install?

  You must follow the link provided below to run the fixit which will automatically fix the problem if you find problems with the fixit, then you can follow the procedure to manually reset Windows component update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/default.aspx/KB/971058

  Once you have run the fixit and then try to install the update and check if that helps.

  If the step above does not resolve, you may need to download and install the update manually. To download the update by entering the number of the item in your favorite search engine and install the update by putting the computer in a clean boot state.

  Follow the link given below to start the computer in a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Once you have with the installation of the update follow step 7 in the same article to put the computer to normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.