Redistribution of authorization (Azman) Manager

Similar Questions

• Custom authorization scheme management has no errors

  Is it possible that I can get when someone goes to a page, they are not allowed to be on (schema of authority used to apply it) instead of cold shutdown redirect them to the page of the application and use the global opinion to inform the user that he or she is not allowed in the selected page instead of going to the page of the red stop sign X? I used global notifications before, but I'm not sure if there is a way to secure my application page of the system of authorisation at the page level and do what I'm talking about. Any ideas?

  This only happens when the user alter the URL, but it happens.

  You can code your authorization scheme to return true when it detects an unauthorized access to a page, but first did use owa_util.redirect_url to access the page of notification of your choice.

  Scott

• Question about freeze on the leave request application

  Hi, expert,

  Right now, our application would be permission to the user background process starts.  In the case that a part of the permissiion refuses here, we would like to request permission from the user again once a day (which we he did yet).

  However in the past, I saw the post related stuck permission and also this message "BlackBerry freezes on application of rejection" ( http://supportforums.blackberry.com/t5/Java-Development/BlackBerry-freezes-on-rejected-permissions-r... ). I'm so worried to again ask the time other than the device to start. I've added code to test anyway to ask once a day if certain permissions are denied. My code works fine and I don't have the issue of the freeze even if the permission is denied.

  There are conclusion of couple of this post that I couldn't reproduce here:

  1 Simon said that we would need an external application which I did not because I checked the authorization prior to the construction of our background application. See the code later for more information.

  2 Nitin says the following:

  When you launch the Application RIM Authorization Manager first (using the AutoStart or ApplicationManager or any other method) - you can add permissions with no problems. But if you raise the authorization Application Manager (in the case where the user selected Deny first time), you end up with nightmare ' Please Wait '

  which I have seen my tests on the "BOLD" and torch device (for 1, in fact it has been tested on a certain devices since it is that way on my free agent)

  Since I don't really test on many features, so I'm just wondering if this gel is also linked with a specific type of BB device. It would be appreciated for any suggestion.

    private static final int[] ALL_PERMISSIONS =
      { ApplicationPermissions.PERMISSION_APPLICATION_MANAGEMENT,
              ApplicationPermissions.PERMISSION_DEVICE_SETTINGS,
              ApplicationPermissions.PERMISSION_CROSS_APPLICATION_COMMUNICATION,
              ApplicationPermissions.PERMISSION_DEVICE_SETTINGS,
              ApplicationPermissions.PERMISSION_EMAIL, ApplicationPermissions.PERMISSION_INTERNET,
              ApplicationPermissions.PERMISSION_FILE_API,
              ApplicationPermissions.PERMISSION_SECURITY_DATA,
              ApplicationPermissions.PERMISSION_LOCATION_DATA,
              ApplicationPermissions.PERMISSION_MEDIA,
              ApplicationPermissions.PERMISSION_ORGANIZER_DATA,
              ApplicationPermissions.PERMISSION_PHONE, ApplicationPermissions.PERMISSION_WIFI,
              };
  
      }
  
      public static void main(String[] args)
      {
          LogInstance logInstance = null;
          String launch = null;
          try
          {
  
              if (args != null && args.length > 0)
              {
                  launch = args[0];
              }
              if (launch != null)
              {
                  if (launch.equals("autostartup"))
                  {
  
                      //here is the code to check all the permissions for app
                      checkAllPermissions();
  
                      logger.debug(logInstance, "Background App is entered");
                      BackgroundApp app = new BackgroundApp();
                      app.init();
                      app.enterEventDispatcher();
  
                  }
                  else if (launch.equals("gui"))
                  {
                      //here is the code for UI process
                  }
  
              }
          }
          catch (Throwable ex)
          {
              ex.printStackTrace();
              logger.error("got exception for starting the agent " + ex.getMessage());
  
          }
      }
  public static boolean checkAllPermissions()
      {
  
          try
          {
  
              Logger.infoStatic(loggerName, "Checking all permissions");
              int count = 0;
              while (count < ALL_PERMISSIONS.length)
              {
  
                  if (current.getPermission(ALL_PERMISSIONS[count]) != allow
                          && manager.getMaxAllowable(ALL_PERMISSIONS[count]) == allow)
                  {
                      Logger.infoStatic(loggerName, IUserProfileDao.PERMISSIONS_NAMES[count]
                              + " is not set to allow.");
                      updated.addPermission(ALL_PERMISSIONS[count]);
                  }
                  count++;
                  if (count != ALL_PERMISSIONS.length - 1)
                  {
                      continue;
                  }
                  if (updated != null && updated.getPermissionKeys().length > 0)
                  {
                      Logger.infoStatic(loggerName, "Invoking permission screen");
                      return manager.invokePermissionsRequest(updated);
                  }
              }
          }
          catch (Exception e)
          {
              Logger.errorStatic(loggerName, "Exception wile checking permission" + e);
          }
          return true;
      }
  

  Before OS5 only one application can request at a time. Often, this would cause a freeze if another application has requested permissions while dialogue was still in place. This has been fixed since OS5 and upward.

• Close an interface based on the CRC errors

  We have 4510 with double 10 gig links to 6509.  When one of our interfaces begins to accumulate the crc errors its impact on latency and availability of our users behind the 4510.  Either the interface err - disable or manually stop us it and the other link 10 gig is unlocked by spanning tree and the traffic starts to flow as usual.  Is it possible to use the EEM to detect these errors and entry of the crc and stop the interface?

  I'm looking at the below as resolution:

  Te5/1 trap to bypass authorization event manager applet

  "event TenGigabitEthernet5/1 setting input_errors_crc entry-op name interface entry-val 0 entry value output-comb type or output-gt exit-val 0 exit value type op - the exit time 5000 output-event-polling interval of the true 100 maxrun 10000.

  action 1 cli command "configures terminal.

  Action 2, command cli "te5/1 interface.

  Action 3 cli command "shutdown".

  An EEM applet will work for you, but the way you have it designed could not do what you want.  Try this:

  authorization of monitor_te51 event handler applet work around

  event interface name TenGigabitEthernet5/1 setting input_errors_crc entry-op gt entry-val 0 increment type entry exit-val 0 out of operation eq output-type increment

  command action 1.0 cli 'enable '.

  Action 2.0 cli command "config t.

  Action 3.0, command cli "int DUREE5/1.

  action 4.0 'closed' cli command

• Cisco Aironet 1131AG and measure access points to the power of the wireless signal?

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  We have about forty points of access Cisco Aironet 1131AG spread over four floors and they all have a static IP (BVI1) on the same SSID, customers will be on its own virtual local area network (dhcp on 3750 switch) and they use several channels (1,6,11).  Cisco Wireless Control System is pending. This wireless network should support roaming for customers (there will be Wi - Fi tags of multiple AeroScout and wireless laptops). To measure the strength of the wireless signal and wireless coverage on each floor. My questions are:

  1. How to measure the strength of the wireless signal: we must meet at least three APs available with signal excellent (I guess for the WCS needs that will determine the position of the client in the building)? We thought to use NetStumbler and a few laptops with wifi and measure as many points as we can as simpler thing. Or should we use something like Cisco Aironet Client adapters for our mobile phone and then use Cisco Aironet Client Utility (is it worth buying for our analysis and measurement)? Any other idea?
  2. What signal level should we consider for a good wireless (dBm)?
  3. That we should propose for authentication, authorization and management accounting? What happens to the roaming wireless? I did not quiteunderstand WCS, WDS and WLC-that should be used for above tasks?

  Thanks in advance.

  "Use the command on the AP" sh dot11 associations "will give you the clients associated with success.  If you add the MAC address of the client at the end of the command, you will get detailed information.  Look under "Signal Strength" and "Signal to noise".  Under the strength of the Signal, you want a value of-75 dBm or lower (lower values the better).  -76 dBm and is bad.  Under Signal-noise, you want a value of 25 dBm or more (values higher the better).

  To measure the strength of the signal, I use Airmagnet, but you can use Netstumbler or Cisco Wireless Site Survey.

• 1.3 the ISE and multiple licensing requirements

  I am building a box of ISE 1.3 and I want to know if the following is feasible

  I have an AD forrest who has several groups of configured users

  1. Corporate
  2. BYOD
  3. demo

  What I want to do, use these groups to assign users wireless to the VLAN correct based on the membership of these groups AND the type of device they are connecting from.

  for example User1 connects to the network wireless from a Mac.  And they belong to the Group of corporate users.  I would like to be put on the vlan corporate.

  However, are they connect from their IPhone device and also belong to the Group BYOD, they get put on VLAN BYOD which has restricted access.

  I guess I should add User1 to the company and the BYOD AD groups, then the terms of use to determine what type of device they use and then create a profile for authorization to manage this VLAN they deleted in.  Then use airespace acl to determine what resources, they have access to.

  Unfortunately, the interface has changed a bit from 1.2 to 1.3, and I don't know if this is feasible.

  I advise to use the BYOD within the ISE feature that uses the device registration. All devices are on (default) RegisteredDevices group identity within the ISE, so that your authorization policy can look if EndPointIdentityGroup = ADGroup RegisteredDevices AND = BYOD then = BYOD VLAN + ACL.

  Put your saved rule BYOD above all others in the list for your rule of Group of companies don't replace the BYOD.

• Cloning of the roles of one vCenter to another

  Hi guys,.

  I need help with a workflow I want to build for our VMware administrators facilitate the management here. But I am stuck and don't know how to proceed. Maybe someone can help me.

  I have the next step in my workflow:

  Roles of Source vCenter
  var SourceRoleList = new Array();
  var SourceRoleList = Source_vcenter.authorizationManager.roleList
  var InfraSourceRoleList = new Array();

  for every (role in SourceRoleList)
  {
  If (Role.name.indexOf ("Infra")! = - 1).
  {
  InfraSourceRoleList.push (Role);
  }
  }
  Roles of target vCenter
  var TargetRoleList = new Array();
  var TargetRoleList = Target_vcenter.authorizationManager.roleList;
  PreExisting var = 0;

  for every (role in InfraSourceRoleList)
  {
  Pre-existing = 0
  for each (TargetRole to TargetRoleList)
  {
  if(TargetRole.Name == Role.Name)
  {
  Pre-existing = 1
  }
  }
  if(PreExisting == 1)
  {
  VR;
  {
  Target_vcenter.authorizationManager.updateAuthorizationRole (Role.roleId, Role.name, Role.privilege);
  System.log ("role:" + Role.name + "'-update privileges '");
  }
  catch (ex)
  {
  System.log (ex);
  System.log ("role:" + Role.name + "-no exists - no update");
  ex = null;
  }
  }
  on the other
  {
  VR;
  {
  Target_vcenter.authorizationManager.addAuthorizationRole (Role.name, Role.privilege);
  System.log ("role:" + Role.name + "-created with privileges");
  }
  catch (ex)
  {
  Target_vcenter.authorizationManager.addAuthorizationRole (Role.Name);
  System.log ("role:" + Role.name + "-created");
  }
  }
  }

  If the role is not existing in vcenter target each privilege will be copied correctly. If I try to update fails. But when I read the description of authorizationManager.updateAuthorizationRole for e it seems the right function to use.

  BTW: I wrote some workflows of managing role in 2009... I refreshed the workflows/actions and packed them to share with the community: roles for authorization vCenter management workflows

• Using overdrive, and Adobe, but can no longer download ebooks because it breaks down! Can anyone help?

  using the overdrive, and Adobe - application why it crash when I try to download an e-book? Never had this problem before. Can anyone help? @

  HI Maria,

  OverDrive is not an Adobe product.  He just happens to use an Adobe ID to authorize and manage your device.

  I recommend you to visit OverDrive help for assistance with the OverDrive app.

• Authorization Manager contains web addresses I have ever visited

  There are thousands of Web sites listed in the authorization manager that have no connection with a site I have ever visited. When these come and I'd be worried that someone is in my computer?

  I think that I thought about it. The list of authorization manager seems to fill when I do Spybot immunization. It seems that it adds all of these sites. I know that he puts these sites in the 'Exceptions' and blocks.

• Why didn't - not all visited Web sites that appear in the list of authorization manager?

  Some Web sites I visit (e.g., play.com) do not appear in the list on the left of authorization manager. However when I click on 'Manage cookies' they appear, with a list of all of the cookies. Is it because of a few settings, that I don't know? How can I stop this happening? Operating system is Windows 7.

  Thank you very much. That seems to work for me, even if it seems no match with the instructions on the support Web page.

• Authorization Manager - how to 'forget' several sites at once

  Firefox Authorization Manager allows a user to a site "Forget this Site" at once - but this isn't a practical way to forget hundreds or thousands of sites listed in Authorization Manager. Is it possible to select several sites to Forget, or to treatment by lots-Forget sites, or forget all sites?
  Thank you.

  Hello

  You can try to clear recent history through the Tools (Alt + T). Select filtering criteria closely in the timeslot to erase and choose all options under Details. That would be to forget mass some or all of the sites according to the selected time interval.

• What can I do when I'm there on the permissions in the top bar I get yahoo search results and not Authorization Manager.

  I'm putting my authorization manager info, but when I put on the permissions in the top box I have yahoo results research and authorization manager is not started. How can I get another way to authorization manager? Or how to get the address bar to work as it should? I look forward to a response.

  Enter Subject: authorizations in the URL/address bar. (Requires the colon and no space)

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• OIM 11 g - authorization of the user management policy questions

  Hello
  
  (1) created a body-> human resources
  (2) created a role-> HR_Admins
  (3) assigned HR_Admins roles as the administrative role of human resources
  (4) user1 created with the Organization as a role of human resources & HR_Admins assigned to this user.
  (5) permission policy created for the management of users with the following selections
  -> Create user authorization.
  Constraints of data-> Selected "Users who are members of certain organizations" & selected above human resources organization.
  Transfer-> role of the HR_Admins.
  now, when I log in User1 I am not able to see Administration tab where I can choose create user.
  I'm working on this issue for a few days, but not able to find the solution & I missed some configurations?
  
  Thank you
  Rahul Shah

  Hello Rahul,
  I tried your scénarion... with clause below
  1) founded an organization-> human resources
  (2) created a role-> HR_Admins
  (3) assigned HR_Admins roles as the administrative role of human resources
  (4) user1 created with the Organization as a role of Human Resource & allocated HR_Admins to this user. : default role all users
  (5) permission policy created for the management of users with the following selections
  -> Create user authorization. :-* "Select ALL."
  Constraints data-> Selected "Users who are members of certain organizations" & selected above human resources organization.
  -> HR_Admins role assignment.

  Data constraints
  Organization security setting hierarchy aware (include all children's organizations)

  Now I am able to see the user tab to create, and I can create user in resources human org only.

  If it does not work for you. Just assign 'ADMINISTRATOR of REQUEST' in the AUTH POLICIES. The result of the test.

  Also, what is your version of the IOM?

  Test with updated as new role name, org, and user data.
  -kuldeep

  Published by: Kuldeep on May 22, 2012 04:19

• Type of transaction SOUL in the management of users (additional access authorization)

  We are looking for use the feature "Request additional access" self-service in the user management to allow existing users to request additional responsibilities (we're on EBS 12.1.3, all user access is entirely in EBS without integration of SSO).

  I was able to set up so that it works very well if no approval is required for the new responsibility, but we would also like some requiring approval of line manager/supervisor until responsibility is granted - documentation related to the management of users tells us that we can add a Type of Transaction SOUL in the field "Type of Transaction for approval" when creating a new registration process , but nothing more than that. I wonder if someone could point me to any more detailed documentation that would help us to work on the question of whether we can use an existing transaction of the SOUL - or how to create a new one for this particular task?

  Thank you.

  Andrew

  In case anyone else has this problem in the future, I connected an SR and support pointed me to a really useful note on My Oracle Support on how to do

  How to create the Type of Transaction for approval of the SOUL. B or higher? (Doc ID 420387.1)

• Authorization to load an extension using Adobe Extension Manager

  Win 7, CS4, Admisistrator

  I am trying to load an extension provided on a DVD included in Photoshop CS4 channels & masks (channels & Masks.xmp) by Haissem Ben Achour. The extensions Manager opens and the license agreement will appear. When I'm agree, I get a message that I don't have permission to do this and to cnotact the administrator. I am the administrator. Anyone know what I have to do to make this work? Thank you.

  

  You can be the Admin, but your programs are not running with administrator privileges as long as this OPTION is enabled. You will have to right click on the shortcut/exe Extension Manager and select run as administrator