Similar Questions

• How can I reduce reconfiguration time channel between acquisitions HAVE? Thank you

  Hello world

  I need to acquire signals from sin 40 (2000 kHz) at a sampling rate of 250 kech. / s through using a daq card 6225 with its AIs. In order to achieve this sampling rate I must acquire all the samples of the first channel (something like 2000 samples), then the same thing with channel 2,... up to channel 40.  My problem is that I am wasting a lot of time (about 170 ms) whenever I move a channel because Labview reconfigures the channels.

  When I move a channel to acquire samples of 2000 the only parameter that changes is the string that's all.

  I tried many things with the wizard DAQ and Daqmx examples but without success.

  Is there a way to reduce the time between 2 acquisitions... paramating?

  Any help would be great.

  User

  If you insist on the channels one by one, you can not avoid the delay. Of course, you can capture all channels at once. The effective sampling rate would be 6.25 kech. / s, if you did all the 40 at a time.

• take an hour for 4 seconds to render time

  I'm trying to make a second clip 4 3d text, make a 360 ° turn, I export to H.264 format and have to correct computer specifications.

  3.04 GHz Quad core

  12 GB of ram

  I'm new on this and want to start exporting more video for a project, but I can't do it with this render time.

  Brandon

  If your 3d text was created with the ray-traced rendering engine in After Effects (and you do not have an NVIDIA GPU, which meet certain criteria), then it will take a lot of time. If you find yourself doing a lot of this kind of work, I highly recommend the 3d element. It is a pretty cheap third-party plugin that makes 3d things very quickly. Zaxwerks 3d Invigorator is another popular choice.

• Reduce the time of a slide FMR

  Caprivate v5.5

  I created a slide using FMR and the review, she wants to "speed up"... reduce the time required to play.

  Is it possible to do this?

  Noel

  There is no way to compress the duration of a JVM on its entire length (you could do with say an object on the timeline by dragging its ends), however, you CAN change the JVM to chop bits or reduce the length of this way.  You must be careful to ONLY select portions to the stream when nothing is in motion, otherwise the effect will be not transparent.

• How to reduce reading time?

  I use openscript on oracle ebs/forms, but when I playback, it costs me a lot of time and I can hardly stand. I already reduced the time for reflection after each command. Can anyone give me a suggestion on how to reduce the playing time?

  Use the option of reading "without delay."

  'See '->' preferences OpenScript'-> 'Reading'-> "SEEN Pacing (Think Time)"

• How to reduce the time

  HI friends,
  
  I work with Owb, I need a help from you all.pls help me as soon as POSSIBLE... (i.e) when I run the map in the center of control, nearly 3-4 hours.sure mapping I know there huge data in the database, but can we reduce the time for execution of these mappings.. pls let me know...
  
  Thank you
  Rajusen

  Deploy the mapping, then run it.

• How to reduce the time of triggered output

  Hi, I am using PCI6111 to run some Matlab commands with external triggers. The meter is used for counting of triggers. I tested the delay between the edges of the relaxation and execution of analogue output and has found has fluctuated around 2 ms to Ms 6 is it possible to reduce to a minimum the time? Thank you!

  Matlab codes are:

  % meter Installer;
  s = daq.createSession('ni');
  s.addCounterInputChannel ("dev1', 'ctr0', 'EdgeCount'");
  s.Channels (1). ActiveEdge = 'falling ';
  Get (s.Channels (1), 'Terminal'); PFI8% return

  % Add ananlogputput to work as new triggers;
  S1 = daq.createSession('ni');
  S1.addAnalogOutputChannel('dev1',[0],'Voltage'); AO0%

  %
  VolumeNumber = 400;
  FramePerVolume = 2;
  TotalTrigger = VolumeNumber * FramePerVolume;

  %%
  VaOn = 2;
  VaOff =-2;
  outputSingleScan (s1, [VaOff]);
  %%
  II = 0;
  s.resetCounters;
  NN = s.inputSingleScan;
  Nlast = 0;
  then NN<>
  NN = s.inputSingleScan;
  N = mod(NN,2);
  If N == 1 & NN == Nlast + 1;
  DISP (NN)
  outputSingleScan (s1, [VaOff]);
  Nlast = NN;
  else if N == 0 & NN == Nlast + 1;
  DISP (NN)
  outputSingleScan (s1, [VaOn]);
  Nlast = NN;
  end
  end
  DISP('Done~')

  
  

• My render times are normal?

  Hey guys.

  Data sheet:

  I7-4790 @ 3.6 ghz

  24 GB RAM

  NVIDIA GTX 970

  I think my HARD drive's 7200 RPM, but I'm not positive.

  I went to a 30 minute interview and it takes 2.5 to 3 hours or more.

  This seems quite high to me for a system that seemed to be pretty decent.

  Any input would be greatly appreciated.

  Thank you for your time

  

  Well, I see another.

  your variable rate is useless at this setting. If min and max are the same, just to make a constant bit rate of single-pass and save time during rendering.

  Also, I cobbled together a bunch of stuff from the nets here.

  --------------------------------------------------------

  -Quick Guide first export Super-

  1. run the software update of the creative cloud

  2. launch media before first opening encoder (there is a bug core if its open after)

  3 clean up the cache setting, delete temporary files

  4. turn to day neatvideo and run its optimization tool.

  5. check if the cpu is parked. The utility is called ParkControl

  or select a High Performance profile in the control panel-power management

  6 change memory by changing the preference of optimization to memory performance or visa versa if

  you have the image large formats.

  7 reduce large images to size of sequence before importing in first

  8. do not use lumetri

  9 activate smart rendering x - 12 4 x made faster

  http://blogs.Adobe.com/kevinmonahan/2012/10/11/smart-rendering-in-Premiere-Pro-CS6-6-0-1-a nd-late.

  10. do not use adjustment layers

  11. do not use 64 cube luts

  12. do not use dynamic link with the AE projects. make it in the first place, expecially warp stabilized shots

• Need a help. Please, I beg you. the project long render times.

  Hi there everyone!

  If im new in the world of Adobe AE. I need help. Watched a 100 videos and searched, but... I did an audio visualization for my youtube channel and want to restore the mix of 50 min. My PC config is 8 GB ddr4, skylake quad intel. GTX 960 m. Then, when I try to make it take so long! 24 seconds to display a preview is about 5-7 min. and for 50 minutes, it would be around 7hours! my laptop from heating even after 7 min of render. How can I speed up the rendering, and I have to do with the size of the video? I made in adobe encode. h.264 - 8 mb full HD - advice read on youtube too for the best settings. People please help

  Have a great day and tons of positive emotions!

  Unless your 50-minute video is one-shot with effects applied to the same shooting and there is no cuts nuts is to try to do this in a single computer in AE. According to effects applied to only one made of several minutes, that a framework can be normal and expected. The usual workflow for a project of 50 minutes would be to break into small pieces, if the effects on each segment are complex or very slow return, then you make each room when this is done. If the effects are simple and fast make you can consider using Dynamic Link to each piece in Premiere Pro for final assembly. More than 90% of my comps AE are less than 10 seconds, because most of the shots in the films that I produce are less than 10 seconds. Several times my compositions contain dozens of layers and can take up to four or five minutes a frame to render. Most comps are effectively created composite or motion graphics restitueront at the rate of 3 or 4 frames per second. Nowadays about half of my work is 4K, and I produce masters 4 K that are made to the HD for final delivery using Adobe Media Encoder to create an h.264 MP4.

  I'm just guessing that you have very long shots in your comp with a sort of music visualizations. If this is the case, every time that the music changes or there is a break, you break the project down into a separate model and then make this model in a lossless format visually. Because your system is currently taxed I would use the Cue Render to render these masters of the production. When you have all the parts made I would bring them together in the final project in Premiere Pro, which is the only way you'll be able to get an overview of real-time editing. Then use Premiere Pro to make the file available. This will save you time in the long run because rendering Cue and the output module will make faster than Adobe Media Encoder because TEA running AE in the background to do the rendering, it is less effective. The probability that a rendering of 50 minutes will fail repeatedly during rendering is very high, if all this makes your system resources. This will also give you time to check each section to see if you like it before moving on to the next section.

  I hope this helps. I would never and have never tried to edit one to animate a sequence in AE who was only a few minutes longer because it is simply too inefficient. I put a whole feature in AE to make color correction, but he is already gone and it is a layer that already went to a master of production. Therefore, unless all your effects are applied to a single video track for 50 minutes together, break the project and make it into pieces.

• Fan making noise and radically reduce battery time

  Hello

  I bought VPCEB490X in 2011. Since last one my fan makes noise more than normal. I can keep this, BUT the main problem is that when after running at max speed, my battery time will reduce to min. initially battery time is 2 hours then it gets reduced to 1 h 2 min. lease tell how can I control who... imy event is clean. Once I restarted the system and went into the BIOS. same here all at once my fan started to run fast the hell...

  where is the problem?
  Answer soon
  Thank you

  Hello

  I use Sony Vaio VPCEB26FG

  I download an MP3 by IDM... All of a sudden the fan speed raises it of maximum speed and creating a weird noise... After a few seconds, it's normal speed...

  I is not open to any program or analysis of my PC... & my use of the PC processor is only 3%

  But why my laptop fan speed is automatically raise...

  It again when I scan my PC with Kaspersky Internet Security 2012...

  Please help me!

  Kind regards.

• Render time extremely Long

  Hello.  I am very new to the aftermath and I try to make a slideshow template, that I bought at FluxVfx called 100 photos slideshow.  I talked to their support and they said it should take about 1 to 2 hours to make the project.  However, on my first try, I waited 7 hours and only got 1-minute slide show 2 1/2 minutes of it to QuickTime.

  I am running after effects 2015

  on one 4G macbook air with 1.7 Ghz Intel Core i5 and 120,11 GB free memory.

  I initially deleted the cache by going to Preferences > media & disk > clear disk cache.

  Render settings: best settings; QuickTime (video codec H.264 @ 75% quality)
  

  
  

  I reached out to society, I bought the template from and they told me to clear the cache by going to edit > purge > all the cache memory and hard drive.  When I did this, my estimated rendering time is spent 24 hours to 117 hours.  I suspect that there is a wrong setting somewhere in the program or on the computer, but I am new to this program and not familiar with what it would be.  Any advice would be greatly appreciated.  I do this for a Saturday wedding and I really need to figure this out soon!

  Thanks in advance for the advice.

  I'm glad that you guessed it work!

  Rendering of a sequence of images would help in this situation because you wouldn't need to merge anything. As soon as it crashes, you start just made of the frameworks you don't have to go. It is very convenient for long makes it like that.

  And, Yes, 4 GB is the minimum recommended and the bare minimum to run same æ is 8, so could very well be your problem. RAM is cheap these days so if you have another project in the future, consider adding little RAM of your machine.

• Powerful Machine - disappointing Render times

  Hey guys, I spent thae spent a few days trying to get my head around multiprocessing in AE CC. I have a computer pretty beasty with a lot of power. Its possible I am simply expected too but I want to be sure! Windows

  Im running Windows 7 Enterprise 2008

  I have 32 hearts altogether (with hyper threading)
  64 GB of Ram
  Quadro 4000

  
  I started a comp pretty basic just to do some bench marking. Its 8 seconds long and is just a text consisting of sand (using Trapcode Form). Need me 3 minutes to 6 seconds ago. Is that what seems reasonable? p

  It's at full resolution 1080 p 30 fps

  Also, I noticed that multiprocessing doesn't seem to work for the 50 first officers, or two, then happening right outside to render 1 frame at a time. Any idea why this might be?

  See you soon!

  Need me 3 minutes to 6 seconds ago. Is that reasonable?

  Yes, it's a short time to render.

  Sometimes, depending on the effects and other used items, each image can take minutes to return.

  > Also, I noticed multiprocessing doesn't seem to work for the first 50 frames or two, then just out of 1 frame at a time. Any idea why this might be?

  You have not kept enough RAM for use by processes other than the background rendering process. When the first plan RAM cache fills up (or when another application on your system wants to RAM), background processes should stop rendering and return the RAM for use by these other processes.

  See this page for more information on memory and improving performance in After Effects: http://adobe.ly/dC0MdR

• Incredibly slow audio render times!

  I have been dealing with his for awhile now on this documentary, I've worked on. When I export my script which is just around one hour, it takes almost 2 HOURS just to render the audio previews before it will export! Most of my calendar is a single track with no effect at all. Video makes it faster than the audio! The only unusual thing about my project it is largely composed of sequences of multi-cames long enough - about 30 sequences ranging from 30 minutes to 90 minutes. There appears PP is rendered audio for every bit of my source sequences even if only a few seconds or minutes of each of them is actually being used. I don't know what else could happen.

  I thought that since some of the audio was recorded at 44.1 K perhaps it was a problem and some of the sequences had several audio tracks in order to solve this problem, I went through each sequence and made on a stereo mix to 48/16 and deleted the old audio. Which seem to help for a while as with CS6, I was getting a very annoying message "made necessary audio files' every time I touched the game until I made the audio that like I said really takes a lot of time. Also, I can make it but if I finish first and re - open, I have to make it all over again. It does not record audio files. First CC is better about reading without the rendered message, but she still need return to export. I have no idea why it would be necessary to render audio 48/16 source files.

  I reported this to Adobe but just thought I'd put it here to see if anyone else has problems. If all rendered audio should never be held in this day and age, it must be extremely fast. This problem is really brought exports to a crawl for this project.

  

  Adobe CC, OSX 10.8.4 on a 12 core Mac Pro with a GTX 570 32 GB of ram and WB Studio. My RAID is an internal raid in 3 disks with 3 drives 3 TB in RAID 0. The video makes charging properly. The situation would be better if the audio rendering reloaded at least but why he needs to make "Audio previews" for this sound simple is beyond me. And as I mentioned I've lived quite a bit of trouble to make it as easy on the first as possible by replacing all sound 44.1 with 48/16 wavs.

  I found this on another forum:

  There are MANY other problems that came on this project and so I was put on the Group of pre-release with Adobe, but the cause for the problem described above was due to the speed of audio transmission of the project does not not at the speed of transmission of audio clips. There a resampling them accordingly.

  This seems to have solved it for me.  I opened my audio files in another program, re-sampled them and then put them back in first.

  EDIT: I can confirm that it worked.

• How to use oracle camps House to reduce patch time

  Hi guys,.
  
  I have a plan of action to reduce the patch below the time:
  
  I create the first House of Oracle to the/u01/app/oracle/db_1, for example. When a patch comes out, I have install Oracle together in a different House-/ u02/app/oracle/db_2 - then apply the fix it.
  
  During the process of installation and application of the fix, the database is running, because he fled from home /db_1. When the window failure happens, all I have to do is stop Oracle;
  
  Replace Oracle Home db_2 and raise the database. If there is a problem, I can reset the Oracle Home back to the former.
  
  1. install the new Oracle Home
  2. apply the patch on the new House
  3. close the database
  4. change Oracle Home to the new location
  5. start the database
  6. in case of problems:
  7. close the database
  8 change the old Oracle Home
  9 start the database
  
  
  =========================
  
  
  Well, my question is where can I change the oracle home path? (IE step 4 above).
  
  In the environament unix file?
  
  Please notify.
  
  Thanks in advance

  Please notify

  Yes, correct

• Reduce maintenance time.

  Hey all,.
  
  My colleagues and I asked for requests for more in addition to BI publisher reports as well as reports standard apex. In this way the user has something nice to present to senior management or someone outside the company. These two reports are based on the same query, so we had to keep the query in two locations (in the region of report) and report of shared component queries. What are some solutions that you guys cooked up with to help centralize a query in one place and help reduce maintenance.
  
  We thought to make a package for each workspace with functions that return the desired query, but we will run into conflict with several people working in the same package at the same time.
  
  We also thought about storing queries in a table in a common schema and make a very simple application to maintain applications and their history. In this way, we have a procedure that you could use. ex: get_query ('report1234');
  
  See you soon,.
  
  Janet Tyson

  Why don't you have the query stay with the apex report and build your reports bi publisher with the Word template? When doing it this way, you add the layout of rtf report to your application and enable the printing of the report feature... The report runs the query generates an xml file and takes your rtf file and generates the desired output...

  Here is an example: report X produces a result, you take the query and copy TEMPORARILY in the area of share components, to build a representation of the XML output (no need to register). Take the XML file and open the word rtf generator, load it in and build your layout of the report. Save the file in rtf as component shared application, turn on the print report page attribute and select the report defined just as the file of report of your choice...

  It is the FAVORITE to do way... The only reason why you would need store the query in the components area shared is if use you it outside of a report...

  If you have any other questions, let me know...

  Thank you

  Tony Miller
  Webster, TX