Redundancy for transparent firewall IOS

Similar Questions

• IOS transparent firewall

  Hello

  I am trying to configure transparent firewall IOS on a box of 2600 with IOS 12.4 (1), following the guide available.

  FastEthernet 0/0 - internal IP address 10.0.0.1

  FastEthernet 0/1 - external, no IP address

  Both belong to the same bridge Group 1, and 'show the bridge group' shows that they both be "transmission".

  A laptop is attached to the external interface for the test (with the LAN IP address), and I can ping the box from Cisco if I add an IP address to the external interface.

  However, bypass surgery doesn't seem to work. I am trying to ping address of the laptop and I see no replies to ARP requests. 'the bridge' displays of the router knows the MAC of the laptop, but didn't bother to respond to ARP requests. Any ideas?

  I apply no access list for now, until I do Bridge works.

  Thank you

  Andrey

  I've never set it before, but read a doc about it shows this:

  From:

  http://www.Cisco.com/en/us/products/SW/iosswrel/ps5207/products_feature_guide09186a00801ee193.html

  BVI system requirements

  If a BVI is not configured, you must disable the Routing IP (via the no ip Routing command) for the transition operation is taken into account.

  If configured, a BVI must be configured with an IP address on the same subnet.

  You must configure a BVI if more than two interfaces are placed in a bridge group.

  The doc, it seems you must use a BVI-config and not put an IP address on the FastEthernet interface if you have a router functionality as well into the bridge group.

• What is a good VPN for Mac and iOS client?

  I want to identify a strong product of VPN for Mac and iOS.  I want something that is easy to install and maintain, and it's effective.

  Thank you

  This depends a lot on what you're trying to accomplish. Can elaborate you on why you think you need?

• Why are there redundant for Microsoft Security Essentials download sites?

  Original title: Microsoft Security Essentials:

  At the insistence of some other people on this community, I decided to start another thread for this exact same topic:

  Why are there redundant for Microsoft Security Essentials download sites? I went on the first site in my search on the web:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=520

  It looks pretty official to me, however, there is only one problem with the above site. Download options are way too vague for us lay people. After publication on the website of MS Community, I was quickly corrected on my ad which does not seem to be an idle thread and offered a link to download the instructions and frequently asked questions that did not work. Much later, I was offered another site to download with different language options and a more detailed description of download:

  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-all-versions

  Well, I have to ask the same question again, but in a different way: why society billions of dollars allows this kind of nonsense (multiple and various download sites on the web) occur under their name? Excuse me if I look a little frustrated on this problem, but I am!

  Here's what the site was used initially. I still don't know which version to download for use on this site. The only distinction: "amd64" or "x 86". I don't know looking below that mean both.

  Version:	Date of publication:
  4.4.0304.0	10/11/2013
  Name of the file:	File size:
  ENUS\amd64\MSEInstall.exe	13.0 MB
  ENUS\x86\MSEInstall.exe	10.6 MB

  Download sites are for companies and technicians who need to deploy these.  Basically, the people who understand and who need these details.

  For consumers (users of this community site), the printable page is simply microsoft.com/security_essentials

  Here, you can easily get the version you need.

• The requirements for standby Firewall ASA

  Hello

  I have ASA 5510 firewall with security more license bundle is running in our production environment, and I am now to buy another box for Firewall ensures according to my understanding, the wait should be same as an active firewall.

  Here are the specifications for this run into our existing environment

  1 ASA 5510 Firewall (security more Bundle license, 1 GB RAM, 256 MB Flash)

  And buy the replica of above with security @ License bundle, 1 GB RAM, 256 MB of memory Flash.

  My question is, is there anything else that I'm missing for the firewall to sleep?

  Kind regards

  Saeed

  ASA failover partners must have the same number?

  Hereby I guess that you are referring to the same number of interfaces.  These interfaces must also be of the same type.  so you can't have an ASA with 4 interfaces of concert and the other with 2 interfaces Gig.  Or you can, but you will not be able to use the failover for 2 of the interfaces on the SAA with 4 Gig interfaces.  Similarly, if both ASAs have 4 interfaces but an ASA has 4 interfaces Gig while the other has 4 Fastethernet interfaces, then this only would be not supported.

  --

  Please do not forget to select a correct answer and rate useful posts

• Redundancy of RADIUS in IOS config

  Hello

  I need to implement servers Radius (ISE PSN) failover/redundancy on switches Cisco 4 radius servers. We have no dedicated load balancers in use. As far as I understand there are two options in IOS:

  1. use "radius server retry reorganize method" in IOS
  2 using the load balancing feature integrated IOS ' method load-balance-server radius less outstanding.

  The question is what is the advisable to use it in case of ISE? What are the advantages and disadvantages?
  Thank you!

  As long as you have all of your ISE servers configured in the n and they are all synced, you should be good to go. I made many deployments of ISE and never had to use one of the commands you listed.

  That being said, if the "radius server balance the load method allows less pending" If you want to try to share the load between the servers of the ISE.

  I hope this helps!

  Thank you for evaluating useful messages!

• Transparent firewall Mode

  Does PIX firewall support Transparent fashion?

  Not currently for the PIX device, but it's on the roadmap. FWSM 2.1 code (expected in December ' 03) will support this feature.

  Scott

• iPhone keeps asking for password hotmail (iOS 10)

  Hello

  I had this problem since upgrading to iOS iOS 10 9. I have 3 accounts hotmail on the iphone, once I get the password it will work properly for a period of time (usually one day) and then ask for passwords with a message indicating an error has occurred and iOS needs approval from hotmail again.

  I noticed that this often happens when I wake up in the morning and I haven't used the iPhone for a few hours. This problem never arose on iOS 9. I've recently updated the iPhone 6 7 and the problem persists.

  Is this a bug of iOS 10? I also tried to delete all my accounts and adding them again without success. My accounts do not use a two-step verification.

  I am currently using iOS on iPhone 10.0.2 7

  Hotmail is notoriously buggy.  For years.  Have you tried their forum for iOS 10 compatibility issues?  There may be suggestions from there.

  Best,

  GDG

• Searching for pictures of iOS 10 works is not as expected

  I have updated to a couple of my iOS devices (iPhone 6 and iPad Air) iOS 10, actually 10.1 public beta 1 now, but find the results obtained in the search of my library of ~ 5000 photos and videos quite modest.

  I very rarely get the images I'm looking for, if any.

  For example, 'find my photos from the Netherlands' Returns none so I have 122 in my library.

  The research of the city of Delft (that is the Netherlands) returns a single result, which, ironically, shows a screen indicating the word "Delft" on a local train.

  I wonder if there is the possibility of re-indexing of the library or the device can be done on a Macintosh, but I'm afraid user ios do not have such a luxury for now.

  In my troubleshooting process I spent from Italian to English, since this might be a reason for poor search results. But things have not changed.

  Of course, if I ask "Find my photos of the mountains" (or dogs by the way) I get decent results this image recognition works though, not much luck with geotags.

  Any idea?

  / P

  Wow!

  The answer to this question of mine has been overwhelming... (I'm kidding)

  In the meantime, FYI Apple has released the iOS 10.0.2 update that solves the problem of geotags.

  I can now find my photos from the low countries (or Switzerland or India also) and get the correct results.

  Nice

  / P

• How to disable mirroring for airplay in IOS 10?

  I would use Airplay the old-fashioned way, where I can use it without mirroring (audio and video playback) - anyone have any ideas?  For example, mirroring works well in all applications (i.e. NFL app).  I can't get the audio to work and not the video.

  Hello chimidon,

  Welcome to Apple Support communities.

  I see that you want to use Airplay the old way of streaming audio and video, where you can use it without mirroring. I use a lot of Airplay on my iPhone. So I know how it is important to ensure that you are able to use it without any problem.

  iOS 10 includes only the mirroring option in the control center. So, sliding up to open the Control Center allows you to mirror of your iPhone at a connected device Airplay. If you want Airplay from a specific application, the app must have the Airplay feature, and you need to activate Airplay from within the application itself. When you open an application, look for it icon to launch the Airplay and then select your Airplay device.

  All the best.

• Why Apple ID work for the devices iOS and Yosemite... .but not for iCloud?

  Recently, I upgraded to Yosemite. So I was forced to change my PWD for Apple ID.  I have AN AppleID account. After having changed the PWD, other requested change upgrade iOS devices, and all the work.

  UNLESS iCloud refuses to accept my new Apple ID... All other devices, updates work fine with the new PWD AppleID...

  What is the problem with iCloud?

  How can I force it to accept the Apple that accept all other devices/systems ID?

  Jim B

  Have you tried the signature to iCloud and then again?

  What to do after changing Apple ID or password - email address

• iPhone keeps asking for privacy permissions ios 9

  Hello!

  I have a problem with my new iPhone 6s, that I was not able to solve. My iPhone keeps asking privacy permissions to access my photos, my sites, my cameras, etc. even if I have already authorized this specific application. I tried to reset the location & privacy setting generally as suggested in many forum of discussion, but it couldn't fix the problem. Can you help me please?

  Fabrizio

  -What are you talking about?

  Some applications will be asked to use your site as long as the application is running. An application is considered as "in use" when using it actively in the foreground, or when used in the background, which will show the status bar.

  Other applications will be asked to access your location, even when the application isn't running. When you authorize an application should always use your location, iOS will remind you that the apps are able to use your location when an application uses your location in the background.

  Which is copied from here.

  Privacy and location for iOS Services 8 and iOS 9 - Apple Support

• Close-up on iTunes Radio AND Search Suggestions MAY NOT BE RESTRICTED for CHILDREN on iOS 9.2.1 AND IS UNSAFE FOR CHILDREN

  Hello

  Even when I block everything under 'Settings' and 'Général' and 'Restrictions', my children can still access content inappropriate through "Spotlight Search Suggestions" on the search bar on my iPhone or see inappropriate suggestions illustrations Album and research through "iTunes Radio.  These two parts of UNLOCKED iPhone need to be blocked.  Please Apple, help my children and I have a secure environment on my iPhone without interference from portions of UNLOCKED the iPhone iOS.  Please do not many of us have to go to a national broadcasting network to announce that the iPhone IS NOT safe for CHILDREN and cannot NOT BE SMALL.

  I guess you have to monitor the activities of your children yourself.

• Activation of newspaper "ignored packages" for Windows Firewall

  Can someone tell me please how to activate "ignored packages" journal of WF in Windows 7 Home Premium.  In the settings of Windows Firewall and Adanced security, surveillance, saving settings; It shows the path to the file and that it is not currently logging.  The only way I found to enable this is in GP Management Console which I don't believe that has this version of Windows.
  http://TechNet.Microsoft.com/en-us/library/cc947815 (WS.10) .aspx
  In the end, I try to understand why people can't get to my FTP on a non standard port when Windows Firewall is turned on even with the exception of the allow on this port and 20 for outgoing.

  Thanks for the quick response.  Although I didn't change the size of the log file, the article you sent had a section on the activation of the firewall log.  The answer that I needed.

  netsh firewall set logging droppedpackets = enable
  
  Bill

• Redundancy for JOINT unique on two separate chassis

  EtherChannel Protocol can be used to provide redundant active / standby for single JOINT on two different chassis.

  Rgds.

  Failover will be based on how your FWSM mac address is learned by the devices of "inside". In normal operation the FWSM PRIMARY will be active so that all traffic will pass through the present JOINT on this base Sw. When FWSM failovers all traffic will pass through the FWSM SECONDARY and module JOINT in the second frame.

  Concerning

  Farrukh