reference color monitor question

Similar Questions

• Satellite P200 - 1 8 - where to get drivers & color monitor question

  He is my grandson computer.
  He is 5 years old and the operating system is Windows Home Premium 64-bit.

  Following a recent accident, we decided to reload Windows.
  We seem to have lost our drivers Toshiba - can be someone please point me in the right direction?

  Also the colors of funds went beserk - they resemble the light that shines through the oily water.
  They seem OK when the programs are executed, so we do not believe his material.
  The only driver for the monitor is shown as a M/Soft generic monitor.

  If anyone has any advice it would be greatly appreciated.
  Thank you very much!

  I guess all your laptop problems appearing after the Windows has been installed, would resolve install the correct drivers.
  Liam says, you can find all the drivers on the Toshiba UE driver page.

  Here you must choose: Archive-> P-> Satellite P200 series Satellite.

  Installing the display driver should fix your problem of color too.

• Monitor - 20555SH249 # product: LCD color monitor

  I have a HP LCD color monitor - product 20555SH249 product # P8740AA

  HSTND 2171-A1 model No.  Recently in the upper left corner a box appeared saying Luminance

  a contrast in red and the (blue) brightness another line. Please help me get rid of that it is very annoying.

  Cannot click on it, as it is impossible to get my cursor on it. If I leave the computer for a while, it will go away but as soon as

  I go back and type whatever it is, he's back.

  Thank you

  Pauline Fenner

  Would be a good idea to remove the serial number that you have pointed out that it is a violation of the forum rules

• Satellite L300 - VGA color TV question

  So here's my question:
  When I connect my laptop to the tv via a vga cable, it turns very yellowish wheres theres supposed to be white and it will remain like that for altogether.
  Some time then it will switch to normal and then come back.

  The time differs when pass the colors. Sometimes it will stay normal and other times that he wont even go normal and just remain yellow.
  Its very frustrating. I tried to uninstall and reinsalling the driver generic pnp and no problems yet

  Can someone help me please

  > When I connect my laptop to the tv via a vga cable, it turns very yellowish wheres theres supposed to be white and it will remain like that for altogether.

  Where did you notice these color question; on display s laptop computer or an external monitor?
  This problem also occurs if the external monitor is not connected?

• 25 color change question in Internet Explorer theme

  I changed the 4_2.css to theme 25 so that the header is # 671 17 color and the navigation bar is color #333333 to match our color scheme of institutions. This makes perfectly in Firefox and Chrome, but IE 9 shows this under the standard blue colors. I narrowed down it to what follows in the definition of the page header template:
  
  <!-[If HTML5] > <! [endif]-->
  <! doctype html >
  
  If I comment <! doctype html > colors will make correctly in IE however images only is more visit and the theme is more sensitive. My question is that I have to make these changes to work properly for IE?
  
  Thank you
  
  Ed

  Problem solved, and now works in IE9, 8, 7 and ff & chrome. Focusing on the header of the solution was in the base64 encrypted background-image: url('data:image...) During the decryption of the code there are references to #4276 b 5 & 5a92d9 #. I changed my colors and it works now. The complete code is:

  / * Start the background color header changed all references to #4276 b 5 & 5a92d9 # #631919 & 6 A 1918 # * /.

  background-color: #631919; background-image: url)

  /*

  'data:image/svg+xml;base64,PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0idXRmLTgiPz4gPHN2ZyB2ZXJzaW9uPSIxLjEiIHhtbG5zPSJodHRwOi8vd3d3LnczLm9yZy8yMDAwL3N2ZyI+PGRlZnM+PGxpbmVhckdyYWRpZW50IGlkPSJncmFkIiBncmFkaWVudFVuaXRzPSJ1c2VyU3BhY2VPblVzZSIgeDE9IjUwJSIgeTE9IjAlIiB4Mj0iNTAlIiB5Mj0iMTAwJSI+PHN0b3Agb2Zmc2V0PSIwJSIgc3RvcC1jb2xvcj0iIzQyNzZiNSIvPjxzdG9wIG9mZnNldD0iMTAwJSIgc3RvcC1jb2xvcj0iIzVhOTJkOSIvPjwvbGluZWFyR3JhZGllbnQ+PC9kZWZzPjxyZWN0IHg9IjAiIHk9IjAiIHdpZHRoPSIxMDAlIiBoZWlnaHQ9IjEwMCUiIGZpbGw9InVybCgjZ3JhZCkiIC8+PC9zdmc+IA==');

  */

  'data:image/svg+xml;base64,PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0idXRmLTgiPz4gPHN2ZyB2ZXJzaW9uPSIxLjEiIHhtbG5zPSJodHRwOi8vd3d3LnczLm9yZy8yMDAwL3N2ZyI+PGRlZnM+PGxpbmVhckdyYWRpZW50IGlkPSJncmFkIiBncmFkaWVudFVuaXRzPSJ1c2VyU3BhY2VPblVzZSIgeDE9IjUwJSIgeTE9IjAlIiB4Mj0iNTAlIiB5Mj0iMTAwJSI+PHN0b3Agb2Zmc2V0PSIwJSIgc3RvcC1jb2xvcj0iIzQyNzZiNSIvPjxzdG9wIG9mZnNldD0iMTAwJSIgc3RvcC1jb2xvcj0iIzVhOTJkOSIvPjwvbGluZWFyR3JhZGllbnQ+PC9kZWZzPjxyZWN0IHg9IjAiIHk9IjAiIHdpZHRoPSIxMDAlIiBoZWlnaHQ9IjEwMCUiIGZpbGw9InVybCgjZ3JhZCkiIC8+PC9zdmc+IA==');

  background-size: 100%; background-image: - webkit - gradient (linear, 50% 0%, 50%, 100%, color-stop(0%, #631919), color-stop(100%, #6A1918));background-image:-webkit-linear-gradient(#631919,#6A1918);background-image:-moz-linear-gradient(#631919,#6A1918);background-image:linear-gradient(#631919,#6A1918);)

  / * End header background color * /.

• New monitor showing different colors - monitor profile?

  Hi all, need help. I got a new Acer monitor and I have three questions. The first is when I open photoshop I ger the following error: "ACER S232HL monitor profile seems to be defective. Please return your monitor calibration softwear. "Then it gives me two choices,"Ignore the profile"or"use Anyway. I tried both and they all have two make the images appear differently. What should I do? Following the directions thinking I found here: http://virtualmcube.com/hardware/how-fix-monitor-profile-appears-be-defective-photoshop-er ror-message

  Number 2 is that when I open the same file in PS, LR, online and image viewier, colors of all the different aspect! Help!

  Number 3 is my images in LR seem more saturated.

  When I plugged in for the first time in the monitor I was using HDMI and I was told this would be the best. When I came across the above problem, it's reccmended for me I use DVI. DVI has helped get richer blacks, but did not help anything else.

  And just for a control group, I plugged my old monitor back in and everything's fine, but I would use my new! Help! Thank you

  Monitor canned profiles are notoriously inaccurate or downright faulty. Unless you want to go right to the end and calibrate/profile with a bunch of third parties, you are probably much better to simply using sRGB, and that's what happens when you click 'ignore profile.

  It's the same solution in the link you posted, only more complicated.

  Number 2 is that when I open the same file in PS, LR, online and image viewier, colors of all the different aspect! Help!

  Number 3 is my images in LR seem more saturated.

  Come back if you still see this with sRGB profile. In general, both Ps and Lr are fully color managed and will use the comprehensive monitor for display profile. Most of the other applications are not, so this isn't entirely unexpected in itself.

  When I came across the above problem, it's reccmended for me I use DVI.

  Shouldn't matter. Both are completely compatible and the digital video signal is the same.

• Select secondary monitor, triple monitor questions

  Hello everyone.

  I have a Mac Pro on 10.9.5 configured with two dual-DVI video cards.

  One of them is running a panel Samsung 27 "(main display with the bar of menus and other things) and a 20" calibrated Cinema Display (to the right and slightly below that primary) that I use for color proofing.

  The other GPU half the VRAM so it runs a 17 ' 4:3 screen Benq that I use for auxiliary tasks.

  However when I select 'show on the second monitor viewers' in Final Cut Pro X, it displays the viewers on my small Benq instead of my CD.

  I've seen several solutions on the web involving the scene one of the monitors as TV Out, but it seems to work with HDMI GPU, as in my case the TV output preferences list is empty.

  What I would like to achieve is to have the viewers on my movie screen, the scenario on my main 27 ", and if possible, have the event on my 17 auxilary browser".

  Now to show the viewers on my Cinema Display, I have to disconnect the Benq, go to system preferences, click on detect displays, go to FCPX, to allow viewers on the secondary screen, reconnect the Benq, go to System Preferences and detect again. This process is slow and boring.

  Anyone know a solution to this?

  A big thank you in advance.

  -Ak.R.

  Although FCP X do not explicitly lets you choose who will be the first, second and third poster, you can get it to work the way you want.

  This requires a little trip in system-> display preferences.

  From your message, I get that you are have the menu bar on a single screen - since Mavericks, you can have menus bars in all of your screens.

  (This can be changed in the preferences-> Mission control system, by checking "Screens have a separate space", then open a session out and back in).

  (The following will work regardless of your choice above)

  Do call to your poster 1,2,3. Open the preferences-> display and click Arrangement.

  (A) slide small menu bar to display number 1 to number 2. This may move the FCP X display number 2. If this is the case, drag FCP X back to display the number 1.

  (B) window-> Show spectators in second screen

  Fact.

• Dynadock and Satellite Pro U400-135 - external monitor question

  Hello.
  We have a serious problem on the 26 dynadock vga e Satellite Pro U400-135 unit

  The problem is:
  If set to host as a single external monitor during startup frequent windows loses resolution external monitor.

  Example of resolution monitor post seting like 1280 x 1024, start with connected dyndaock, frequent resolution 1280 x 800 not correct and external monitor image not correct.

  Operating system is Vista 32 bit, driver dynadock is 2.3 update and dynadock displaylink displaylink site 4.6.16208 site.
  Same problem with Windows Xp 32 bit.

  How can I solve the problem?

  Hello

  If I understand the first message, external monitor resolution automatically goes to 1280 x 800 even if you set it to 1280 x 1024.
  I guess that your external monitor is connected to the dynadock.
  Is this good?

  AFAIK, you can customize the video settings of the dynodock.
  It provides a video output in two modes: Mode and extended Mode of mirror.

  Mirror mode creates an identical display of your computer to the external monitor screen. In mirror Mode, the dynadock automatically selects the settings (screen resolution, color quality and discount rates) for the external monitor that will allow the best resolution based on your computer's settings.

  Maybe you use the mirror mode and therefore the dynadock the resolution automatically because it of the best for the external monitor.

  I recommend checking the Dynadock manual for more details.
  There are two modes are described there.

  Welcome them

• XPS 8500 CPU connection monitor question

  First of all, my apologies if the question I'm about to ask answered several times or seems stupid. I sought an answer in the database of the product and on the different for one for what I consider to be a reasonable period of time and has not found an answer. I tend to replace (high-end) computers about every 5-6 years and all replacements comes a new set of technologies to learn and understand. (I'm also more than 60 years, but please don't hold that against me-one day you will be this age too if you're lucky and try to live right)  My old Sony Vaio desk had the usual video output VGA I hooked to a monitor CRT even older and later in a flat screen monitor.

  OK, so what is my question? Pretty basic: I bought a new 27 '' HD 1080 p Viewsonic monitor and find he has two input jacks-one is the customary VGA and the other titled "DVI - D '. The new '' has usually taken VGA output and then taken two apparent labeled additional video output: HDMI and "[0]" (?)  I really don't like that means taking [0], but I would like to know how I can get the highest definition possible/resolution displayed on my HDTV? The Dell quick start guide under 'Connect the Display' shows five different connection next to the VGA version configurations. I bought my local Fry Electronics HDMI cable, but have no idea if its what I need or if it will work with the configuration of my CPU and monitor. In addition, Dell put two black plastic plugs into the socket HDMI and Sockets [0] so should I infer that they are 'dead' links or what? Please don't tell me to request a refund of CPU Dell or call Geek Squad and pay $300 to get out and connect a cable... It is impossible THAT complicated-it's all in knowing which wire to connect to the place where seems simple. Thanks in advance for any valid response. I contact Dell technical support and after waiting 15 minutes for the agent to answer my question, I released on bail.

  I typically do not "reply" to my own comments, but I made a mistake in the information. "VGA" alleged out Jack at the bottom of the back of the CPU is actually NOT a VGA port (which has 3 rows of 5 pins of each for a total of 15 pins) on further review, (put my reading glasses) he has three rows of eight pins per line (total 24) left a 4 socket side pins in a sign more or configuration. My monitor has the same number of pine (24) entries in the same configuration (without the 4 pin side socket), so assuming the same number of pins (24) is compatible between the CPU and the monitor, all I have to do now is to get the appropriate cable and the problem is solved. Thank you once again, Kirk, for giving me a starting point to work from. Now to contact tech support for my win Dell. 8 issues of pro...

• Color monitor is changed to Aqua

  Original title: unwanted aqua highlight

  my monitor has changed color so it now has an aqua background and icons and white letters have an aqua highlight. How can I remove this?

  Hello

  Are you referring to Windows 7 theme?

  You use any third party background?

  Check in another user account or the admin account if the same problem occurs.

  If it works fine in another account, can transfer all files on the account that works. Here are the steps in the link:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  It will be useful.

• Reference color changed by Illustrator problem

  Hello, I'm on CC2015 Illustrator on Mac, printing to pay I'm working on a CMYK file and my problem is that illustrator does not keep the reference of the color that I setting in the color selection window. Thanks for your help.

  You're welcome, db.

  Changes in STL/RGB/Hex values are very small, so I think there is no need to worry.

• Panel of reference color Finesse

  Hi, I am currently working with Color Finesse and want to use the Panel refers to try to match film shot with two different cameras.  I've lived the manual to see how to load an image in the Gallery, but I think I'm missing something.

  I can't find an option to load all the images in the Gallery; If you take a look at the attached screenshot it seems to miss all of the buttons included in the manual (although the manual looks like its been taken on a MAC).

  

  Is this a limitation with the Group AE plugin or am I missing something else?

  I think you are looking for the Gallery tab. It has buttons at the bottom of loading/selection of reference images.

  Once an image is loaded into the Gallery, you can select it as the reference image by double-clicking the item in the list of contents of Gallery.

  You don't say what version of Color Finesse you use. There were a few problems with reference images in earlier versions, so you can upgrade to the latest version of Color Finesse, which is 3.0.4. The installer for the latest version is available on our website and can be installed using your current Color Finesse serial number.

  Bob Currier

  Synthesis

• Color profile question/problem.

  These two products of the same file were taken on D300s my spouse and are good examples of a profile problem, that I can't solve.  It's the same problem, I also have experience on the Nikon D700 and D3.  What follows has been exported with the profile "caméra Standard" and notice the reflection of the Yellow Sun on the door panels:

  

  The following has been exported with a profile of lightroom generated xrite. Notice the overall contrast better, but also horrible unnatural yellow on the same door:

  

  This difference causes all kinds of distortion in natural hair that contains any red-orange.  I use these doors because they are a striking example.  Any attempt to correct through the World Bank generally will result in too much blue elsewhere.  Also, I've created several test profiles in several light conditions (manually and LR), and they all cause this problem in the three cameras.  This isn't a question of a unicameral bad or wrong created the profile.

  I have two questions: this example shows well enough to see what I mean?   If so, is - anyone can speculate as to the problem or the solution?  Even conjecture would be appreciated since I'm out of my country and not an expert in this kind of thing.   Thank you!

  George, this is an extreme lighting situation that allows to create strange colors that are difficult to "rectify". I put that word in quotes because the question is: what were the colors in lookin at the scene with your eyes. Chances are that the strange colors were there, but not entirely seen, because our brain has a built-in mechanism to change the colors of "what they should be."

  So, in other words, I think that you cannot be too critical of a picture taken in these extreme lighting situations.

  I have also seen pictures taken in such circumstances are very difficult to "color setting". You showed us the example of a photo 'red '. But the same is true when you take a photo in extremely "blue" light (a very cloudy and rainy day in shadow).

  I fould that in such situations I've either must live with colors that are not 'right' or I have to resort to adjustmenst of local color in PS.

  WW

• Fast color editing question

  Hi all! I have a picture of a black bag. I need to change the black to purple, I forgot how to do this! Y at - it a mandate to do this so that I can properly search instructions?

  Use the channel mixer, in detail. It's a difficult question, because your black handbag values can vary greatly according to the original. You must also have specific amounts of yellow and black to stay, to add shape (Black) and depth (Yellow).

  These values for your outings will get in the Charles.

  Output channel mix channel

  Cyan = 100 c 0 m 33y 33 k (taps Y & K retail and this puts in C)

  Magenta = 0c 100 m 33y 33 k (taps Y & K retail and this highlights M)

  Yellow = 0c 0 m 33y 0 k (decreased Y more saturated, increase for more deep purple closest black)

  Black = 0c 0 m 0y 55 k (leave some for the shape, opened upward in order to get a saturated color)

  

• HP PAVILION 550-126: start PC Desktop Monitor question

  Installed a HP Pavillion PC with Windows 10 550-126.  I plugged my old model monitor (2009) PC Pavillion, which is a HP 2009 m.  HP 2009 m monitor had a DVI connection, so I bought a DVI adapter to HDMI to connect the new 550-126 Pavilion.  At the start of the monitor shows nothing.  It takes a long time (5-10 minutes) before the login page appears.  When starting I have pressed the "Source" button on the HP 2009 m monitor and it comes up with a block that says "Check Vidoe cable", the block is delivered on one that says DVI is scanning, then digital asset.  I'm trying to understand if the problem is I use an adapter DVI to HDMI or if there is something else that happens - or I need to get a screen that has a direct HDMI to HDMI connection.

  Thanks for the help.

  It's the adapter.

  If you want the video to appear quickly, you'll need a display more modern.

  Yours is a type of old-school LCD vice a LED modern type.

  Fortunately, most modern screens usually have a HDMI input.