Office Jet 6700 - vertical lines on printing via Alice only & scan option.

Similar Questions

• Office Jet 6700: HP Office jet 6700, I try to print it says printer ready, file print empty!

  I have a HP Office Jet 6700. I am trying to print a document, it will say print Untitled. The print queue of the printer will open and say printer is print ready, empty file, Idle.

  It is automatically paused printer. When I try to click on the document itself in the print queue and resume printing it gives the same message.

  Power on the printer flashes slowly as well.

  I hae rebooted my computer and restart the printer completely several times and it still didn't work. I printed just something about this last night so I don't know what the problem is.

  Hello! Welcome to the @Chinadoll702 forums

  I read your post on printing problems you encountered on your Mac running 10.6 and your Officejet 6700. I have some ideas in mind to start and I would like to know the results and we will take it from there.

  Update the firmware of the printer: get the latest Firmware and updates

  Be able to reset the printer and make sure the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on and can help greatly.

  Press the power button to turn the product on.
  With the product, unplug the power cord from the back of the product.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the product.
  If the product does not light by itself, press the Power button to turn it on.

  Make a few copy then and tell me if the copies suspend, cancel, do not work, etc.

  Try to print the text change on your Mac as well and get back to me with the results.

  Good luck

• Office Jet 6700 Premium: unable to print from 6700 JO unless I wake up

  Hello

  The appellant here desperate because I cannot solve this ongoing problem.

  System set up:

  Office Office

  HP Office Jet 6700 premium

  Wire in a BT Home Hub

  Laptop HP EVO, running wireless

  Problem:

  I can no longer print the laptop wireless. I need to go to my office and print something. Then only the printer seems to be "awake", and then I can print from the laptop. As you can imagine this is not how it is supposed to be and this causes a lot of frustration.

  The printer is also set for a static IP address (it was to solve other printing problems ). I also checked the firmware, and it is up to date.

  Please tell us how to solve this problem.

  Thanking you in advance

  Wolfgang

  Hi @Klee66,

  Welcome to the Forums of HP Support!

  I understand that your HP Office Jet 6700 Premium do not wake up when you print on it, unless you wake up before hand. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  There could be many reasons why this is happening, so please bear with me.

  I see what your printer firmware is up to date, which is good.

  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Please try Fix It tool of Microsofts, solve printer problems.

  You do not share the printer from the computer desktop you have in sharing files and printing? Otherwise, this could cause part of the problem.

  Do you turn the printer power on and off?

  I can't see what your printer is connected to the BT Hub with an ethernet cable.

  It is possible that the laptop is connected to the printer cannot communicate on the 5.0 GHz network. If they are of the same name that will be confusing.

  Have you tried to configure the wireless and no cable connection on the printer to see if it makes a difference?

  How old is the router, have you also checked to see if the router firmware is up-to-date?

  Is the router dual-band? Two networks are the same SSID for 2.4 GHz and 5.0 GHz? If so, change the SSID to 5.0 GHz to a different name and restart all devices.

  What router do you have to BT?

  I suggest you read this article by BT, I have problems of connection of 5 GHz and features dual band wireless BT Home Hub 4 or 5 Hub.

  I see that you have setup a static IP address. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  While in SAP, open the network tab, and then select IPv4.

  Set the manual DNS on the printer.

  • Set the primary DNS as 8.8.8.8
  • And the secondary DNS as 8.8.4.4

  I would like to try the steps in this guide, HP printers - printer (Windows 8) "offline" Status Message.

  If the problem persists, please see these links or contact BT

  BT.com BT Home Hub 5 Product Details - link

  http://BT.custhelp.com/app/answers/detail/A_ID/46549/kW/how%20do%20i%20Change%20The%20Power%20save%2...

  BT.com link - saving on the BT Home Hub 4 and 5 of Hub

  http://BT.custhelp.com/app/answers/detail/A_ID/43669/c/346/session/L2F2LzEvdGltZS8xMzg2NzczMzgzL3NpZ...

  BT.com link - what is the function of Smart Wireless BT Home Hub 3 and Hub 4 Hub5?

  http://BT.custhelp.com/app/answers/detail/A_ID/32235/kW/how%20do%20i%20Change%20The%20Power%20save%2...

  BT.com - contact us

  https://bt.custhelp.com/app/contact#h=eyJzdGVwMCI6ImNvbnRhY3RJdGVtTGluazU2MjciLCJzdGVwSWR4IjowfQ...

  I hope this helps. Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Office jet 6700 all-in-one printer

  My old HP 6500 printer would save the scans as word documents.  My new printer 6700 by default to save images in PDF.  How I can format documents?

  The new features of 6700 doesn't have this option. It will only scan in PDF, jpeg and tiff, not MS WORD.

• HP Office Jet Pro 8610 do not print, but will only fax

  We have a HP Office Jet 8610 Pro and it worked fine until we hung like a fax also Thursday.

  He used to copy, print, scan perfectly but it takes a new fax machine, so we went and bought the phone cord and hung a fax and telephone line with built in answering the Office Jet and the fax jobs, but now it not print a document in Open Office to the printer because she's trying to make a fax cover page.

  I've ran out of ideas can you please help?

  There are two pilots "printer" there, to print, choose the "printer Officejet Pro 8610' instead of the 'Officejet Pro 8610 FAX. Probably, you set another value by default when the fax feature is added, which is for the PC - fax. If you use the print function more often than the fax, make non-fax the default printer.

• MAC OS 10.4 and printer Office Jet 6700 Premium

  You had to buy a new printer, Office Jet 6700 Premium. Networking Wireless with Windows PC, but cannot install Intel Mac Mini Tiger 10.4.1 running pre. Printer drivers are under MAC OS 10.5 and higher. Is there a work around? I try the installation CD without crashing the computer?

  Hello

  The printer is supported by OS X 10.5 and above, as you can see by the specifications below:

  http://www.shopping.HP.com/shopping/PDF/cn583a.PDF

  Try to set another pilot to get printing features and get a limited feature scan using Webscan via your browser.

  You will not be able to get all the features as the installation will fail on OS X 10.4

  1. In the Application's folder, go to the utilities subfolder and open The printer setup utility.
  2. In the printer list that appears, click Add.
  3. In windows, from the menu above, select default browser.
  4. Highlight the printer 6700 and spend the menu popup using Print .
  5. Select HP in this menu and then locate the HP Deskjet 6500 must fit into the operating system.

  To scan, use the feature of Webscan.

  You will need enable the feature of Webscan first:

  1. From Safari, type the IP address of the printer to enter the Web integrated printer server page.
  2. Enter the settings tab.
  3. Under Security, enter the parameters of the administrator.
  4. Check the box next to Webscan and click apply

  Now, you will be able to scan by accessing the analysis of SAP tab.

  Kind regards

  Shlomi

• My HP Office Jet 6700 Premium has suddenly stopped printing from my iPad

  I have a new HP Office Jet 6700 Premium

  It worked very well, wireless printing from my iPad.

  iPad displays a window that recognizes the printer, but it does not print.

  There is no error message.

  The steps below a usually resolve the problem you are experiencing:

  1. turn off the printer.

  2. completely turn off iOS devices (hold sleep and home buttons simultaneously until a message appears prompting you to "Slide to power off". Drag on this bar, and it should completely turned off).

  3. turn the printer on.

  4. switch on the devices iOS back.

  5 try printing again.

  These steps usually fix the problem. If they don't, try these additional steps:

  6. power cycle your router (usually done by unplugging the power cord from the router, wait 20 seconds and in him plugging back in).

  7. ensure that iOS devices and the printer are connected to the same network, and then try to print.

• answering machine software for HP office jet 6700 premium?

  Hi Windows 8.

  As the office jet 6700 is attached to the phone line is a software feature (or 3rd party software) which allows the PC to act as the answering machine?

  I know that in the old days of dial-up Modem software such has been ubiquitous.

  I just want to cut my old answering machine for the configuration of the installation if possible loop.

  Thanks for your suggestions.

  Rob.

  Sorry, there is no functionality of software to allow the Pc to act as the answering machine. The answering machine is connected to the printer because it detects the printer calls.

  When a call comes, the printer reacts and reads as follows the line of the signals. He sends the call to the correct line (fax, phone or answering machine). This is the reason why the answering machine is connected to the printer. The computer will not be able to accept or guided calls or pick them up. Thanks for asking though, maybe in the future.

• Office Jet 6700 will not control panel scan. ideas please

  Office Jet 6700 will not control panel scan. ideas please, everything else works fine and happy with printer

  Have you tried to perform a full power cycle on the system and try the analysis immediately after that everything is turned on?

  • Unplug the router all-in-on
  • Wait 30 seconds
  • Plug the router back in power and wait until it completely initialize
  • Restart the PC
  • Unplug the printer while on
  • Wait 30 seconds
  • Plug the printer back in direct power

  So, have you tried to disable your firewall and protection scan from the front panel of the printer?  Sometimes a firewall service will see the printer as a threat and block incoming traffic.  However, based on the analysis of gets it PC around as she reaches out to the device, rather than the reverse.

• HP Solution Center Software - Office Jet 6700 (windows 7 and windows 8)

  Hello

  My sister and MOM had bought the Office Jet 6700 711.

  My sister's computer is running windows 8 64-bit.  I installed the complete software driver and hp solution center software is not included.  I have search the forum for resolutions and tried to download the driver from hp again and received the same results.

  With what is included with the current and complete driver for the Office Jet 6700 711n, you are able to create new analysis of the profiles of short cut, but you cannot update the printer with custom shortcut profile.

  I call support and got a person in the Philippines under the name of Régine.  I spent 45 minutes on the phone telling him what it was.  Since she was not able to solve the problem, I asked to speak to an engineer to see if the question could be put together.  She told me that she would have some call me within two hours.  I spoke to the hp representative on 21/07/2013.  From this announcement, I have not heard of hp.  It's very sad.

  Since my sister requires no custom scan profiles, she decides to keep the printer.  But my mom is in real estate and it scans many documents and must be able to create the custom scan profile shortcuts on the printer, so that the final pdf file gets not so great.  Due the fact that I have not heard of hp, I suggested that we go back to the printer.  Today, we returned the printer to Costco.

  But, I would get a solution for my sister.  Any ideas?  I highly doubt that hp will remind me.

  Myself, I usually can understand that because I work as a 2nd layer support analyst for a major software company.  If I told a customer that I would call them back within a certain time, I would.

  I know that the service request was probably shut down so that a survey was sent not.

  Thank you

  Hello ressa.

  You're right, that center of Solution is not included with the new printers. HP has completely changed the software program. You are also right in your statement on the creation and registration of shortcuts "scan" with the software. However, the Panel before 'scan' options cannot be changed as old printers. I hope this helps you understand.

• HP OFFICE JET PRO 6960: HP OFFICE JET PRO 6960 does not print pages with j.pegs on them, only those with a pure impression

  HP Office Jet Pro 6960  New installed printer yesterday using CD

  Hi L-U-L-U,.

  Thank you for your answer!

  I would certainly recommend re - create these two files. If everything else is fine printing, it is possible that these files has become corrupted somehow.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this information helps!

• Installation for HP Office Jet 7210 all-in-One printer problem

  I try to install HP Office Jet 7210 all-in-one printer.

  My operating system is Windows Vista Home Premium, service pack 1

  My computer is an AMD Athlon 64 x 2 Dual Core Processor 5000 + 2.61 GHz, with 2 GB of RAM and on the 32-bit operating system

  When I go through the guests to the screen, I get two errors.

  (1) is due to an error of operation. As I have Vista it triggers a caveat, but I understand that this can be ignored and continued

  (2) the system can be installed using the "Run As" command... ». Apparently, I need to re - login as administrator. I am connected with the admin privaledges so not sure how to fix this

  Appreciate your help.

  I'm sure that yu you are trying to install from the installation to Windows XP CD. Try to download the software from THIS page and try to install.

• My Office Jet 6210 all in one printer has an error message is displayed. "OX805dcc31 1309:fm_interpre".

  My Office Jet 6210 all in one printer has an error message is displayed. «OX805dcc31 1309:fm_interpre the printer will not be closed off the coast (unless I unplug it), and I can not get the error message to change.»  Any ideas what I can do?

  It sounds like a code of 'asserting' firmware, something really bad happened - the most probable hardware problem.

• my 3 in 1 printer refuse showing me scanning options. What should I do pls?

  my 3 in 1 printer refuse showing me scanning options. What should I do pls?

  Hello

  What is the brand and model number. the printer?

  You have 32-Bit or 64-Bit Windows 7?

  If you have installed the printer using drivers auto-installés by Windows 7 they can only be basic and do not have the extra features. Please try to go to the printer manufacturer's Web site and the Windows 7 full download/install last have drivers/software for your printer (assuming they exist).

• HP Office jet 6700: disabled network HP office jet printer capabilities

  Please help, my Hp office jet printer will not conect to internet it says the built in network capacity have been disabled and contact the network administrator

  Hi @shell1,

  I can help you reset the printer to get the network features reactivated.

  I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Printer resets: What You Should Know by @Bob_Headrick

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.