Select secondary monitor, triple monitor questions

Similar Questions

• 2 questions on secondary monitor preview - CS4 Windows

  As I said in the title, my version is Premiere Pro CS4 on Windows. My system specs are:

  Motherboard: Intel D975XBX2

  CENTRAL PROCESSING UNIT; Intel Q6700 (2.66 Ghz)

  RAM: 8 GB OCZ Platinum

  Graphics card: SA Radeon 4850 1 GB with 2 DVI ports

  Hard drives: Western Digital Caviar 320 and 640 GB

  OS: Windows 7 RC 64 bit

  I have two problems with the secondary monitor in the first preview. My secondary monitor is my TV, one Sony HD TV, connected to the HIS Radeon using a cable that is at one end DVI and HDMI on the other.

  When I change the HD, AVCHD or HDV video, the Preview on the TV is not interlaced, it's progressive, as if the first was merging the fields. I know that the radeon is powerful enough to properly display interlaced HD video, if I play a comic that I created of my videos in Totalmedia Theatre 3 he plays them back as good as does the blu - ray player. My guess is that the video plays in the source monitor or timeline in first is not hardware acceleration. Is there a way to force this? Maybe a plugin?

  The other problem is that the gamma in the secondary monitor in the first preview is darker that what is supposed to be. I compared the same frame between my camcorder AVCHD and first and at first, it looks much darker. However, when I did the same thing between my camcorder and Sony Vegas, there was no difference. I have to go into control panel of the Radeon and compensate for this, but is there a setting in the creation itself to adjust the gamma?

  Problem number one is that you use a computer output of your graphics card (DVI) monitor that is designed to always put a progressive image, because all computer monitors are progressive screens.  It has nothing to do with the first...

• Notepad opens off screen on the secondary monitor

  Hello

  Please bear with me as I'm NOT a Windows person - I usually run Macs. but I'm back to my parents and it's their Windows box.

  They are running XP Home SP3. This problem affects all user accounts.

  Basically they run a 2 monitor setup - a LCD, a somewhat old (although still perfectly!) Dell CRT reference. The question is about the latter.

  Note, I asked my father and he assures me that no applications have been installed since he first noticed this problem. I tried to solve problems better than I can, but I don't have Macs, Windows!

  Basically, the notebook want to open on the secondary monitor (running its native resolution of 1024 x 768) completely off the screen (to minimize it, maximize, and close buttons are unavailable). The only way I found to fix it is to reduce the resolution of 600 x 800 and then back to native, but he is a bit of a PITA bread as she has to do every time. As far as I know, the notebook is the only application affected and no new software--or drivers--have been installed since this question bagan occurring. Windows Update is configured to run automatically, even if I don't remember the last time she did it.

  I'm sure there must be a quick solution, and easy for this question - if someone would just enlighten me as to what it could be!

  Thank you very much

  Sarah

  Please bear with me as I'm NOT a Windows person.

  And I'm not a person dual monitor, so I'm not positive that it works.

  When Notepad opens, there will be a tab in the taskbar. Click on this and select move. Now, use the arrow keys to get to the screen. Close all other windows except this one and use the cursor to drag the message to the format full screen, or any size you want. File | Output and Windows expected to retain the size when you open it again.

  Bruce Hagen MS - MVP [Mail]

• 10 Firefox: Bookmarks Menu sparkles and is unusable on the secondary monitor

  After the upgrade to Firefox 10, the menu of bookmarks (and other features of the user interface) began to blink when selected. This only happens on my secondary monitor. It does not affect my main monitor. It makes Firefox unusable on the secondary monitor.

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver.

  • https://support.Mozilla.org/KB/how-do-i-upgrade-my-graphics-drivers

• Error: "can't stand running in portrait mode" when you try to access Windows Media Center on secondary monitor.

  Title: Media center does not open on the main montitor and closed because school is portrait. How can I fix?

  In Windows Vista Media Center opens on my secondary monitor instead of my main monitor. Because the secondary is in portrait mode that Windows Media closes with the message "does not support running in portrait mode. I disabled the secondary and rebooted Media Center which works well, but I don't want to have to turn off my high school whenever I want to get something in the Media Center... always on the second monitor by default. How to run on the main screen, because it won't let me start if both screens are activated. I have to use my secondary back in fashion landscape to move the Media Center to return to the main Setup screen? It's simply ridiculous from the start.

  Let me answer your line by line:

  > Description of the question, I understand that you have a problem with Windows Media Center on the secondary screen. Let me know if I'm wrong.

  Yes. This is what it says in the title and in the body of the text... was it not QUITE CLEAR.

  > 1) you have made any changes on the computer before this problem?

  What does that mean? Who on Earth has a blank computer that has never been touched running on two monitors? Of course, there has been changes? What exactly you want to know?

  I find this question to a complete loss of all time and wonder what kind of political support requires that ask you such a question absurd. Please fell free link my feelings on this topic to your agency for my account.

  (> 2) which monitor do you have configured as default view? (Primary or secondary)

  The primary is the default value. The secondary could be the value by default if I didn't say that Media Center opens on secondary education and not on HAND (Please read this as default, everyone in the world does) monitor.

  > Method 1: I suggest you to change the display in extended mode and check if the problem persists.

  The display was already in extended mode.

  > Method 2: if the issue continues, I would also suggest update you the drivers for the secondary monitor and make as primary while the other monitor is disabled then try to turn the screen and check if it helps.

  Why update drivers would change anything. It would not be... the problem lies in the reporting to the Media Center of the portrait mode, that has nothing to do with the hardware drivers; they report portrait mode very well, thank you. As for making primary and turning, wondering if there is anything that I could do otherwise than to resort to having to play with the settings of the monitor in the query, and I don't have to make primary of all... just back to the landscape and backward Media Center elementary school. This does not work... but should I have to resort to something which is, more or less, a workaround if the problem lies in the Media Center and not my monitor settings? The answer should be no, and incidentally, Media Center, once started and settled in portrait orientation (in windowed mode, otherwise you couldn't move) works fine, as long as you do not close it while it is still in this mode, because then he will refuse to start for no reason other than the programmer who designed it seems not know beans orientation or multiple monitors. It's funny that although Media Center does not default to the main monitor, it sends the message of demolition to this same screen by default.

  To the people looking at the end who will not read everything above... it is what to do:

  Back secondary to landscape mode and launch Media Center. Put the Media Center in windowed (not fullscreen) mode and move it will remind the main monitor... it will require a bit of hocus-pocus with the mouse if you cannot put the monitor physically return to the landscape, try it, you'll see. Close Media center so that it restarts next time it opens on the main screen. Reset the secondary back to portrait. VOILA! See you soon. (Please read this as a courtesy and not as applause.)

• Impossible to pass primary and secondary monitors

  After the upgrade of thinkvantage Productivity Center I can either spend my main monitor.  My secondary monitor works, but only in mode "Extend my Windows desktop on this monitor.".  If I try to click on the button "Use this device as the monitor main." on the top control panel a few whites on the monitor and switches to my main monitor again.

  At the same time, I lost the ability to use the Fn + f7.  Pushing this combination has no effect.  If I pass the centre of productivity and choose Configuration from the device / select display settings nothing happens.  It seems that upgrading the productivity Center has beaten some program is in charge of the evolution of the monitors.

  Any help would be appreciated.

  Hi and welcome to the forum!

  What ThinkPad and the operating system are you using?

  Presentation Director is responsible for the combination Fn + F7, put it back, I suggest:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67364

  Special attention to the instructions: -.

  Installation instructions

  Notes:

  • Before installing the Director of the presentation, he must install a display driver appropriate for the target system and the "Lenovo System Interface driver". Refer to the README file of each software package for the installation of such software.
    • Or Lenovo System Interface driver for portable computers ThinkPad-no
      For portable computers ThinkPad Lenovo System Interface driver
      It is necessary to install "Lenovo System Interface Driver" for using Windows Vista.
    • Display driver
      It is necessary to install a display driver appropriate for the target system that is provided by Lenovo. Director of presentation does not work with any display of Inbox driver in the OS.
  • Activate the Fn + F7 key on the screen, to also install the following packages:
    • Power management driver for Windows Vista, XP, 2000, Me, 98 SE.
    • Hotkey driver for non-ThinkPad notebooks or
      For ThinkPad Hotkey features integration
      (Note) If Hotkey features version 2.20 or later is installed on your system, install Presentation Director 4.04 or later version.

• Now I am unable to get the full screen on the secondary monitor. How to fix?

  Now I am unable to use the full screen on something else than my primary monitor.
  Years, I just clicked full screen on Youtube or anything else, and he would go full screen on the monitor that the program was on.
  What setting changed
  I'm running an AMD ATI 5450 Chipset Graphics Card Runinng 12.6 Software.
  4 GB of RAM Windows 7 Pro 64-bit

  Hello

  1. are you not able to use the full screen on the main or secondary monitor?

  2. what happens when you try to maximize or use mode full screen?

  3 did you changes to the computer before the show?

   

  Method 1: Updated display adapter () AMD ATI 5450) drivers and see if that helps.

  Download here: http://www.amd.com/us/products/desktop/graphics/ati-radeon-hd-5000/hd-5450-overview/pages/hd-5450-overview.aspx

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

   

   

  Method 2: Restore the computer to a date when it was working fine.

  Reference:

  System Restore: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions  

   

• Can I set up a secondary monitor to the HD on my iMac mid 2011

  Can I set up a secondary monitor to the HD on my iMac mid-2011 with no problems. I cannot afford to upgrade to the new iMac 27-inch and wanted to update my monitor.

  Is this possible on the Mid 2011 iMac?

  Yes.

  Your best option is to choose a good monitor that has Display Port or DVI input and shy away from those who only have HDMI and VGA input.

  For a display Port monitor you will need a Mini Display Port to Display Port cable if it is not provided with the monitor.

  For a DVI monitor you will need to a Mini DisplayPort to DVI adapter and a DVI cable.

• Why is there a menu bar on my secondary monitor

  Why is there a menu bar on my secondary monitor in extended in el capitan 10.11.4 desktop? I got this set up in 10.8.5 when I logged safari would still be on my secondary monitor. Now in 10.11.4 when I connect my user account, safari ends up on my main screen.

  Anyone, anyone, anyone, Bueller, anyone?

  Uncheck the box "Screens have separated spaces" on the Panel of the preferences of Mission control.

  

• How to configure the secondary monitor to be a principal?

  I can extend my desktop to a secondary screen, but when I try to set the secondary monitor as primary monitor screen goes white on the secondary monitor. How can I set the secondary monitor as master?

  Hello

  This option is not possible with laptops. As you can see, this option is grayed out and the screen of the laptop is on a primary without any possibility to change.

• Tecra M5: How auto to activate the secondary monitor?

  Hello

  When I my Tecra M5 with full-screen dock and turn it on, I would like that it allows to automatically activate the secondary monitor and set it on the primary monitor. Currently, when home he doesn't - and I have to manually enable the second monitor and place it in the primary.

  Any ideas?

  Thank you
  Fraser

  Hi Fraser

  As far as I know it of not possible to set the external monitor as the main screen on startup.
  But what the graphics card is installed on your laptop?
  On the Toshiba site I found a new version of the Intel display driver.
  But is it possible to automatically activate the external display and set it to the main monitor without using the docking station?

• Safari opens on the secondary monitor

  I have two monitors 27 "and Safari insists on opening on the secondary monitor, no matter what I do. All this experience and have you been able to solve it?

  Whenever it happened, it was because I dragged a window or a tab there.  At one point, I closed Safari.  Then when I opened it again, he would open the 2nd monitor.

  What I did:

  When Safari opens on the screen 'wrong', enter a tab open and drag it to the other monitor, then let go.  You should have Safari open on both monitors.  You must also have a menu bar of Safari on both monitors.  Open the window on the monitor that you don't want Safari to open with.  The Menu, file, close this window (command-W).  You should now have that a single Safari window open on the monitor of your choice.  Go menu, Safari, quit Safari.  Then try to reopen the Safari.  It should open on the screen of your choice.

  I can't find a setting for the default screen for Safari.

  If this happens again, make sure the last window you are closing is on the screen of your choice.

  I hope this helps!  Let us know...

• Detection of position of a secondary monitor

  Is there a function that tells me that my secondary monitor is to the left or to the right of the primary monitor?

  I paint 2D objects on a vi that will monitor is displayed on the primary or secondary, to the left or right and used the bounds FP.monitor property to resize the vi and find the origin. But that only gives me the width of the total screen - I can tell if the workspace is one or two long screen sizes, not where they are. I tried out using the panel.bounds, but it's a little messy.

  Thank you

  Are you on Windows?

  If so, you can use .NET to find additional information.  Here's an example to help you get started:

  

  The first is System.Windows.Forms.Screen and you can explore the other properties or such until you get the information you want.

• Is it possible to set up a secondary monitor using a touch screen of Envy 15 t-j000 with Windows 8

  When I bought my laptop, I was told that I could use a secondary monitor to display several documents, spreadsheets, Web sites, etc.  I was also told that there is a connection on the laptop, but it was not.

  Welcome to the HP, Phoenix forum.

  According to the Guide of Maintenance of system for the Envy 15, you might have a HDMI port on the left side of the laptop.

  HP ENVY 15 Notebook PC and HP ENVY TouchSmart PC - Maintenance and Service Guide 15 laptop

  Page 15 of the Service Guide:

  You must also have at least one or two ports high-speed USB 3.0 on each side of the laptop.  Note that if your laptop supports it, as the USB 3.0 #4 is also a USB 3.0 port - an interesting option of load.

  One of these port types can be used to connect an external monitor compatible HDMI.

  If you must use USB 3.0 ports because your computer does not come with a HDMI connection port, then you must buy a USB 3.0 to HDMI .  NOTE: The example shown in the link is just an option - many brands of these converters exist. You should consider buying any brand that you like.  Don't forget to buy a converter that responds to the requirements of resolution of your monitor - buy for the quality and features.

  HP Notebook PC - connection of a monitor, projector or a TV (Windows 8)

  I hope this helps!

• How to view Subvi on the secondary monitor with remote panels?

  I try to have a Subvi, called from a VI hand open on a secondary monitor.  I use panels remote to control my main application, which is open in a web browser on the secondary monitor.  I tried to adjust the monitor properties VI - Position of the immediate window - to '1' and also tried to set this value programmatically by using the node property of front panel, but doesn't seem to work.  My Subvi always appears on my primary monitor.

  I use LV 8.6.1 RT and my application is running on a CRIO.

  I'd appreciate any help.

  Thank you

  Dan