Reference data are not available for the verification of prerequisites

Similar Questions

• Reference data are not available in version 12.1 on Windows XP5.1 operating system distribution

  Hello

  I get the error "reference data are not available for release 12.1 on the distribution of the Windows XP5.1 operating system" when the installation program runs the verification of prerequisites to install Oracle Developer Tools for Visual Studio. I am running Windows 7 Enterprise on 64-bit computer. Am I missing another precondition that I'm not aware of this couldn't cause this error?

  Thank you!

  Hello world

  There is a bug in the installer. Here is the workaround:

  After checking the installation program is not running, please open that file in the staging area where you have unpacked ODAC:

  ...\stage\cvu\cv\admin\cvu_config

  And in this file, change the CV_ASSUME_DISTID value that is there to 6.1

  Save the changes, and then rerun Setup.

  This will force the installer to requires that you have Windows 7.

  Thank you

  Christian

• How to restrict the scope of the EU change when the input data are not available?

  Hi Experts,
  
  I have a user enter-able (EU) field in the Section. When the tag input XML contains data for this field, then the value must print in this area and it is not editable.
  If the input data are not available only that one time that the field of the EU must be editable.
  
  Any thoughts?
  
  I tried like below,
  
  Domain name creation: UE_CompName
  Length: 15
  Type: alphanumeric
  Rule: XDD
  Source name:! Transaction/Compname
  under PreEdit,.
  module: DALW32
  Procedure: procedure of desired
  Information: CALL ("UE_CHECK")
  
  like that, I've updated in the field properties.
  
  Content of UE_CHECK DAL below,
  
  CurrFieldName = Fieldname()
  CurrFieldData = @("CurrFieldName")
  
  IF CurrFieldData! = « »
  SetProtect ("CurrFieldName")
  END
  But it does not work... Pls help me to do this...

  I assume that the 'mapping' occurs during a batch operation (Gendata) through any rule the XDD defined for this field. In the batch, pre and Post Edit calculations do not. This feature is related to the WIP/entry. What you can do is to add a level section - PostImageDAL rule to call your script and protect your land once it was located batch of your operation.

  In FAP that contains that field, add the PostImageDAL rule in the property of the rules in the Section box. In the data box, do call your script.
  Your script is a bit wrong, it seems you were trying to get the 'current' domain name and then check the value of fields. Drop the part and simply name your field in the string in quotation marks in the @ () function and the SetProtect.

• I would like to know what are the characteristics of the trial version of Illustrator are not available for use

  I would like to know what are the characteristics of the trial version of Illustrator are not available for use

  Normally there are no differences in features between the facilities of the trial and will enjoy

• Z10 Z10 BlackBerry BlackBerry data are not compatible with the version of the software you are currently using

  Due to some problems with my BlackBerry Z10 I concerned with my service provider, after recommendation that I wiped my BlackBerry Z10, to update the OS security

  After all this. I am unable to restore completely, (Emails, Contacts, calendar and device settings cannot be restored)

  Link blackBerry screen: the data are not compatible with the version of the software that you are currently runnin

  Kindly guide me I'm too worried about my data, which is very important for me

  If you still get www.bberror.com//bb10-0015 and have not corrected:

  Read the troubleshooting tips for error Knowledge Base BB10-0015
  0015 - file unrecoverable system error has been detected.
  More information can be found here: http://support.blackberry.com/kb/articleDetail?ArticleNumber=000034545

  http://supportforums.BlackBerry.com/T5/BlackBerry-Z10/error-BB10-0015/m-p/2685103#M45693

  I recommend you use a charger automatic file to restore the operating system on your device:
  https://supportforums.BlackBerry.com/T5/BlackBerry-10-functions-and/upgrading-OS10-devices-using-aut...

• Dates are not appearing in the column start and Finsh of MS Project 2010. They become W31/4, W31/5, etc. Instead of 7/31/20113. How can I fix it?

  Dates are not appearing in the column start and Finsh of MS Project 2010. They appear rather like W31/4, W31/5, etc. When it should be like this: 7/31/20113. How can I fix it? Note: Dates listed do appear correctly.

  Hello Charlie,.

  You are welcome. It is what we are trying to do... help people! Thanks for letting me know that the problem is solved. Don't forget to mark it as your response so that we can spread the knowledge more far.

  Kind regards

  BearPup

• The August 2012 calendar items are not available in the calendar of the modern user interface application

  The August 2012 calendar items are not available in the calendar of the modern user interface application.  They are available through a web browser and the application MS Office Outlook.  Y at - it a setting or another way to access old calendar items in the modern user interface.  The phone application has the same problem.

  Original title: elements of August 2012 calendar

  Hello

  I suggest for the link and run the troubleshooting utility Apps and follow the other steps in the article:

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-in/Windows-8/what-troubleshoot-problems-app

  See also:

  Application of calendar for Windows: FAQ

  http://Windows.Microsoft.com/en-in/Windows-8/calendar-FAQ

  Stay in touch with email and calendar

  http://Windows.Microsoft.com/en-us/Windows-8/mail-calendar#1TC=T1

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• My license complete creative suite tells me that my trial has expired and now all programs are not available for me. What is going on?

  After 3 years, my suite fully licensed creative returned unexpectedly to a trial. Today it tells me that my trial has expired, and now all of the programs are not available for me. What is going on?

  Trial opens at the launch

• How to remove special characters that are not available in the key board

  Hi all
  How to remove special characters that are not available in the key board.
  

  select '106    ©      500049' str from dual;
  
  After removal of the special symbols ( not only copy right, it can be any special symbol other than key board symbols), I want to add a single space between two number.
  
  Output should be like:
  Str
  106 500049

  Thank you for your help in advance.

  select
   '106    © ® (k)      500049' str
  ,regexp_replace('106    © ® (k)     500049', '[^[:digit:]]+', ' ') r
  from dual
  

• all rows in the table are not eligible for the specified partition

  SQL > Alter Table ABC
  Exchange 2 Partition P1 with Table XYZ;
  
  Modified table.
  
  SQL > Alter Table ABC
  Exchange 2 Partition P2 with Table XYZ;
  
  
  P2 Partition Exchange with XYZ Table
  *
  ERROR on line 2:
  ORA-14099: all rows in the table are not eligible for the specified partition
  
  The exchange partition works fine for the first time. However, if we try to swap the 2nd partition it gives the error.
  How to solve this error?
  How can I find the lines which are not qualified for a specific part. is there a query to find out the same thing?

  >
  Well, exchange of syntax and logic is not clearly as it should (IMHO). There is no element of syntax that tells Oracle we want to Exchange partition data in a table that is not partitioned or not partitioned into partition table data.
  >
  What? Not sure where you got that but maybe it was before you had first cup of coffee? ;)

  An "Exchange", it's just that; an Exchange. Partition data end up in the non-partitioned table and vice versa. It is meaningless and totally obsolete if "we want Exchange partition data in a table that is not partitioned or not partitioned into partition table data".
  >
  It was decided by Oracle not partitioned table control. If the non-partitioned table is empty, it means you want to Exchange data partition in a non-partitioned table. And if not partitioned table is not empty, it means you want to Exchange data in the table that is not partitioned into partition.
  >
  There is no decision to make. The segments are swapped. Oracle doesn't check, know or even care if one or the other or both segments are empty. 'Control' which is carried out (by default except if NO CONTROL is used) only consists of ensuring all the data in the segment intended for the partition belongs to this partition.

  It is what gives the example of John. This can NEVER work if table1 is empty unless p1 is empty at the beginning:
  1 Exchange p1 with table1
  2 Exchange p2 with table1

  As John explains, assuming that no other operations are trying to put the data from p1 P2 which is not possible if p1 actually contains data.

  You can save it for next April 1!

• I have "upgraded" to FF5 and now have no refresh or stop icons in the menu bar, are not available in the menu "personalize." How to make a comeback?

  Question
  I have "upgraded" to FF5 and now have no refresh or stop icons in the menu bar, are not available in the menu "personalize." How to make a comeback?

  I'm happy to have helped.

  It was something that many users asked when he changed first, and I initially did not know myself that the order of the buttons would make a difference as to if a button or a pair of buttons would be displayed.

  If you mark the post as solved while he is recorded in the answer will appear in the results of research and may help others.

• "Engine of profiles is not available for the series in the worksheet selected" during the execution of a simulation

  When I run a simulation for a worksheet, it gives following message

  "Profiles of engine not available for the series in the selected worksheet. "To simulate the Please add relevant series of Simulation."

  http:// < Server: port >/engineManager/EngineManagerStarterServlet? Command = Status gave status as -1 (running). I started the server in simulation mode.

  Not sure that the question may be.

  Is there a log file where I can find more in detail. If so, what is the file name and where it is stored

  The error message indicates that the engine did not find a series in the worksheet to run the Simulation.

  Add the series of simulation and try again to call the simulation engine.

  Kind regards

  Shekhar

• I am trying to improve my Creative Suite 5 to creative cloud but to myself that I have are not eligible for the upgrade, did someone knows why?

  I am trying to improve my Creative Suite 5 to creative cloud but to myself that I have are not eligible for the upgrade, did someone knows why?

  If you have the education version you are not eligible due to the delivery of the HIGH education

• What type of certificates are not suitable for the signature of the extensions to HTML5?

  It is not clear to me, of the literature exactly what types of certificate are not suitable for the signature of the CC2014 HTML5 extensions.

  I used a Thawte 'Adobe Air' certificate for signing extensions based on Flash. It is now expired. Can I buy the same type and that will work cross-platform for the signature of the extensions to HTML5?

  See http://www.thawte.com/code-signing/content-signing-certificates/adobe-air/index.html

  Thank you

  Hi meeky2,

  Required certificates have not changed for HTML5 extensions, so the same type of certificate that you had before work ('Adobe Air' certificates are very good).

  Note that if you only distribute your HTML5 extension through modules Adobe / Adobe Exchange, then there is no need to use a paid certificate. If you distribute your extension elsewhere, then you should do the same thing as you did with the extensions of the AIR.

  Best regards

  Fraser

• Photoshop Elements 11, Windows 7 PC. When you try to make a Photo montage I get an error "not available for the creation of valid size.

  Hello

  Need help...  When you try to make a Photo montage I get an error "not available for the creation of valid size.

  Photoshop Elements 11, Windows 7 PC.

  Thank you

  Error "not available for the creation of valid size.