Reference Dell 1545 does not start in the recovery Partition

Similar Questions

• F11 HP recovery does not start in the recovery partition

  Hello!

  I am an owner of a HP Mini 5101. It has a function to press F11 to restore the system to the State "out-of-the-box". But my problem starts here. When I press F11 I immediately get a screen that says boot Windows on top manager and and error: 0xc000000e and required device is inaccessible.

  This started after I made an installation "clean" with the Windows 7 DVD that came with the computer I have tried to avoid all the "crapware" that comes with the new book.

  If I boot into Windows, the HP_RECOVERY partition is visible and the image of HP recovery is about it.

  Is there anyway to get the recovery of F11 back to operational status? I have a few BCD edition knowledge that help to my problem...

  Thank you very much!

  U

  I thank very you much for getting back to me so quickly.
  
  I must apologize because I did not explain my problem in the right way. Technically, I am able to the boot partition, but the problem occurs when the partition must start in WinRE or WinPE, I guess that for the recovery to start. The loading process is immediately blocked same front initially than anything "things related Windows" starts loading. So about five seconds after I turn on the computer and boot into the recovery partition, or by pressing F11 error that I have described will appear.

  Update:

  I managed to solve my problem. After setting the active recovery partition and boot from the USB installation with windows 7, I managed to fix the mbr which has been altered and the score did not know what to start. So after fixing it, I had no problem to start the recovery.

  Thank you!

• Satellite U300-13U does not start and the recovery disc fails to too much work

  Hi all

  I have the above computer (or should I say my wife) & it is nothing that a good pain since the first day we got it.
  I have had it about 2 years & had to reformat the HD at least 6-8 times using the product recovery disc as laptop starts.
  The laptop runs Vista.

  In any case, problem I have now is that new laptop does not start, but for some reason any product recovery disc also does not work...
  What I can do...

  I have read on various forums that it might work if I reformat the HD first using some s/w on a bootable CD but how / what S/W can I use...?
  The laptop has a SATA HD 160 GB installed. How can I check that it all works.
  I don't know if the current problem is S/W or related material...

  Toshiba has a utility that I can use...?

  Thanks a lot for all the help...

  John

  Hello

  What happened exactly?
  Do you receive error messages by using the recovery disk?

  Check if the HARD drive is OK! You can check in the BIOS.
  If the HARD drive is listed in the BIOS then the HARD drive and HARD drive found BIOS is not dead.

  Usually, you might start Notepad with the help of a Live disc for example Bart PE
  It s a bootable windows CD/DVD live

  http://www.nu2.nu/pebuilder/

  This can allows you to format the HARD disk, and then use the recovery disc!

• One - Key Recovery does not start in the recovery system (y450)

  I am running Windows 7 on a y450 and want to restore a system backup or a factory default. My installation still works, but I would like to go back to an earlier time before some files have become corrupt. No sheet music have been published. I made a backup of the day system the first that I turned on the machine. However, I do not have ' engraved it on an optical medium.

  I followed the video to find out how to start the system recovery:

  http://consumersupport.Lenovo.com/video/PlayerPage.aspx?VideoNo=32&country=OT&lang=en

  Through the software in Windows to restart, nor from the computer by pressing the recovery button will start the computer into recovery mode - rather the computer starts just to the top as usual in Windows 7.

  I have restored my BIOS to the default settings, but the y450 still does not start in recovery mode.

  How can I start the computer into recovery mode? Yet once, I tried to go through the software under Windows. Just, it restarts Windows and starts as usual. I also tried to stop the laptop computer, and turn on by pressing the recovery button, but it just run Windows as usual.

  Help, please!

  Download ptedit32

  1 extract the utility and run as administrator.

  2. at the top, you must make sure that it's your hard drive
  1 [If you have connected a flash drive that can change]

  3. depending on what you were doing, you two or
  three partitions, but it should be the last.

  4. for the last partition, select the number under type and
  Change it to 12.

  5. at the bottom right, select save changes, and then click ok.

  6. restart your computer and check what is hidden
  partition is no longer visible.

  You should now have novo button works again

  Thanks to ortegaluis.

• Windows vista does not start try the recovery disk and nothing

  I have a pavilion hp a1712n with windows vista starts not tried the disk recovery and nothing, it sounds like it is stuck in mode 'sleep'. I can hear it loading but it dosnt take the cd/dvd drive, I tried unpluging the drive to see if it will continue to load, but it didn't. I can not use the key to go into bios Board or something, all ideas given lose don't are not important computer been gave me this problem, so if there is something that I can do but personal files will be lost is very well thank you all

  Hi scoobydoochick,

  1. what recovery disc do you have?

  2. you receive an error message?

  3. you see the computer manufacturer's logo while you start the computer?

  Looks like that there are some hardware failure on the computer that is preventing the computer from starting.

  Will need you a Windows vista installation disc as recovery are different from the install disc and restore disks are created by the computer manufacturer, we are not aware of its functions.

  Once you get the Windows vista installation disc, that you try startup repair by using the link below or take the local computer tech shop and the material tested on the computer.

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows vista Home premium recovery question - how to get the source for windows vista home edition premium as the recovery does not work since the recovery partition

  How to get the source to windows vista Home premium recovery is not from the recovery partition and gives me an error message

  Hello

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Reference Dell 760 does not start, cannot access the bios menu

  Desktop Dell 760 not start and displays a message: unsupported video configuration detected. I can't access installation or the bios menu. any ideas?

  http://support.Dell.com/

  Link to Dell technical support above.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  Reference Dell coordinated at the link above.

  I'm sorry, but we cannot help you with Bios problems.

  See you soon.

  Mick Murphy - Microsoft partner

• Reference Dell OMSA - does not work after the installation of KB3161608

  I recently installed the last batch (June 2016) the MS updates on our servers.  It went well with the exception of two servers, both running Server 2008R2 and a PE2970, a PE2950.  These are our only two servers running server 2008R2.  On both machines, after installing all the updates, I was unable to open OMSA.  The browser will display "Internet Explorer cannot display the webpage".  OMSA continued to work properly on the rest of our servers, which are almost server 2008.

  I tried another browser, but that has not worked.  OMSA reached 7.3, so I downloaded and installed 7.4.0 and the 7.4.0.2 updated.  I found references to similar online, and some of the install OMSA fixes problems using the prompt, or "runas admin".  I installed them all over the place, but no matter how I installed it, I got the same result!

  I've not found errors in the event logs of the server.

  So I started uninstalling updates until I found the one who broke it, and it was KB3161608.  Uninstall this update fixed OMSA on both servers.

  This updates is listed as optional, so I'm not sweating it for now.  I believe that this is a certificate problem and could be fixed by creating a new self-signed server certificate, but this isn't really my area of expertise.  But I wanted to put this out there in case it might help someone else.

  In my tests, you should communicate the updates installed then OMSA will not work.

  KO 3161608

  KO 3172605

  KO 3172614

• Reference Dell R710 does not start after power failure

  Hello, I tried to find answers on the forum but nothing so far

  I have this R710 at home that I use as a media server, it was working fine before a power outage the other night (no I don't have a UPS :-(

  When the power returned, I noticed one of lighting power supply has been turned off, so I took it out of the unit, but the unit still won't turn.

  I still have a so-called good food because the small green LED on the motherboard lights, and I can access the iDRAC, this feature, I didn't before the net Searchin' for answers, I'm kind of a novice with the servers.

  When I access the iDRAC, on the power supply page, I see nothing, no power supply listed.

  Is it possible that a diet might be "half bad", enough to work the emergency circuits but not the power outlet?

  Symptoms:

  Camera lights.

  Can access the functions of the Idrac, but doesn't do anything if I try to activate it via the tasks "quick launch".

  Power supplies are not visible on the pages of the Idrac.

  Display before work.

  Server was very well just before a power failure which took one of the PSU

  The remaining 870 PSU has the green light on, and the fan works for 2 seconds every time I cut the power it.

  Thanks for any help.

  OK, well... no answers.

  I found a place locally that sold a diet so I arrived with my server, I told them I would buy the power supply that I confirm that the fault was in fact the power supply.

  Well, you know, the unit started correctly with the new power supply, now in IDRAC, I see both power supplies but on that faulty, he reads "present, entry lost.

  So the answer is YES, a power supply may be defective, even if the green light is on.

• Windows does not start after the MAC partition resize

  Hi all

  I am newbie in MAC OS.

  I have 2 bootable partitions on my MBP: MAC 10.11.4 Capitan and WINDOWS 10.

  What I have is:

  1. install MAC OS in the DSS of any origin.

  2. use bootcamp, divide the similar size for WINDOWS 10.

  3. install the new fresh WINDOWS 10 correctly and updated. Yet to backup. None of the additional applications. WINDOWS is default OS.

  4. so far, I need MAC OS or WINDOWS OS correctly. Yet to backup.

  5. I need to resize smaller MAC OS, divide into partitions of DATA for data could leave the two BONES.

  6. Since then, I can't start Windows. Doesn't appear that "no device bootable bra bra bra...»

  7 but if I click on Option after turning on, I still see MAC OS option.

  Could help me fix bootcamp, so I can have the WINDOWS startup and the DATA partition?

  Thanks a lot before.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The result of the Terminal:

  GEORGEs-MacBook-Pro: ~ the georgeaprianto list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * TB 2.0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage MAC 502.4 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database DATA 497.0 GB disk0s4

  5: Microsoft WINDOWS 1000.0 GB disk0s5 data base

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS MAC + 502,0 disk1 GB

  Logical volume on disk0s2

  8256E61A-9B5E-436A-8A15-97A98A55E0E3

  Unencrypted

  GEORGEs-MacBook-Pro: ~ list of cs georgeaprianto$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 7C0ED763-7739-42D4-85DB-E84BD98FA978

  =========================================================

  Name: MAC

  Status: online

  Dimensions: 502414561280 B (502,4 GB)

  Free space: 18907136 B (18.9 MB)

  |

  +-Physical volume EEF7EECD-2732-4794-8ACC-B1FDBE3FFFAE

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 502414561280 B (502,4 GB)

  |

  +--> Logical volume family 821E2FC7-4169-4452-BC6D-7469364950F4

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 8256E61A-9B5E-436A-8A15-97A98A55E0E3

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 502043332608 B (502,0 GB)

  Reversible: Yes (no required decryption)

  Name: MAC

  Volume name: MAC

  Content indicator: Apple_HFS

  GEORGEs-MacBook-Pro: ~ georgeaprianto$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 2000398934016; SectorSize = 512; blocks = 3907029168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 3907029167

  start index size summary

  0           1         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 981278440 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  981688080 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  982957616 970684880 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  1953642496 262144

  1953904640 1953124352 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  3907028992 143

  3907029135 32 table dry GPT

  3907029167 1 dry GPT header

  GEORGEs-MacBook-Pro: ~ georgeaprianto$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 243201/255/63 [3907029168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AC 1023 254 63 - 1023 254 63 [409640-981278440] < unknown ID >

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [981688080-1269536]

  4: 0 b 1023 254 63-1023 254 63 [982957616-970684880] Win95 FAT-32

  GEORGEs-MacBook-Pro: ~ georgeaprianto$

• I want to install WIN 7 on my Dell XP computer. The disc I bought says that the hardsrive must be clean first. The disc does not start on the existing XP. How can I do this?

  I want to install WIN 7 on my Dell XP computer. The disc I bought says that the hard disk must be clean first. The disc does not start on the existing XP. How can I do this?

  Hello

  Have you changed the boot order?

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order and boot from the Windows 7 DVD:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  Do install a cleaning, removal of the existing XP partition and create a new partition to install 7 on in the own installation process:

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  See you soon.

• Dell Latitude E6400 does not start pressing the power instead button, I have to remove the battery.

  Original title: problem starting Latitude E6400 lappie

  Hi all

  When I start my dell latitude6400 is not start pressing the power instead button I have to remove the battery to the rear and place it again, and then the lappie starts... someone can help to...
  Thank you

  Hello

  1. what happens when you start the laptop, you receive no error message?

  2 have you made any changes to the computer before the show?

  I suggest to remove the battery and connect the laptop to AC power and then try to start the computer to see if the problem is with the battery.

  I suggest you to contact Dell support on the issue, as this can be a hardware problem.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=DHS&CS=19

• computer does not start after the Windows XP logo window

  Windows xp home edition
  service pack 2
  Dell inspiron 1501

  1. computer does not start after the Windows XP logo window
  2 works well in safe mode, even connect to the external monitor
  3. I reinstalled xp many times, problem stil exist.

  All the answers?

  Hi dhanushm,

  1. What happens after the Windows logo screen?
  2. You receive an error message?
  3. You have security software installed on the computer?
  4. Have you performed an installation clean Windows XP and even after that this problem exists?

  Method 1

  As the computer starts up fine in safe mode there is a possibility that some third-party programs installed on the computer is the origin of the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2

  If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

• MY dell inspiration does not start, it will only in Safe Mode

  MY dell inspiration does not start in normal mode, in safe mode. I have windows vista. any help please. Thanks in advance

  Hello

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig
  4. Then press enter on your keyboard.
  5. The System Configuration utility opens
  6. Make sure that Start Selection is set for Normal start.
  7. Click the Startup tab.
  8. Make sure you start is not checked
  9. Press the apply button and then press the OK button.
  10. Click the restart button to restart your computer.

  See you soon.

• Dell Dimension does not start in Vista after upgrade

  A friend had a Dell Dimension E521 that won't start - has the missing file system\hal.dll.

  As there was nothing on this computer, he needed, I rebuilt it install a new copy of Windows XP, used the upgrade disc closed for upgrade to Vista and ensured everything in its original package has been installed. Let him install the Windows updates at night and in the morning, after a reboot it indicated that there is an update available. I've updated that and restarted and he said there are only four more updates that memory on the video card. I've updated those, but now it does not start at the top.

  I'm going through the boot process, but as soon as it is the screen black with the Microsoft Corporation and the (green?) bar he starts moving forward a very small amount, and then restarts. It comes up with the selection of Windows startup screen and I tried the secure boot and last good Configuration known without result.

  I tried the original XP disc to do a repair, but this doesn't seem to work with Vista?

  How can I recover a work computer or do I have to reinstall again?

  Thanks for any help, that all the world can offer.

  If you have installed Windows Vista good the first time that the hard drive should be fine however I would suggest running the Dell diagnostics just to be safe. To do this follow the instructions on page 405 of this document and perform extensive tests.

  http://philipyip.files.WordPress.com/2013/02/Windows-reinstallation-guide-02-02-2013.PDF

  What video card you have? Have you tried to remove the video card and running using the onboard video? Have you installed Service Pack 1 before the system drivers?