Dell Dimension does not start in Vista after upgrade

Similar Questions

• Satellite 1800-400 does not start, or crashes after upgrading RAM

  I have the original configuration of RAM for the S1800-400 with 120 MB. I bought a 256 MB RAM with the following description: EXT256-3069/JR, MEM 256 MB RA Toshiba Satellite PRO 4600 series C650, PIII-7500/750/800 #PA3069U (I think the brand is Transcend).

  When I put this slot in the machine, keeping the original and start the computer, it does not start, either on the initial screen of freezing before downloading anything either or that goes to the screen where you can start it in safe mode, but then it does not start.

  I removed the new RAM and it works well again.

  What can be the problem:

  (1) is this new RAM is not compatible with the computer? Based on the selections of the internet service provider, it should be (it's a Portuguese company with their own memory configuration options).

  (2) the computer can work with the original 120Mo and the new 256 MB, or should it be both the same size/brand?

  (3) is there any other problem that I don't have?

  TKS

  Hi Ricardo

  I agree with feliks.
  The module is not compatible and not taken in charge can be responsible for your problem.
  The best way is to use the Toshiba recommended of the memory modules.

• Presario SR5507F does not start for Vista after "Windows Update"

  One of my friends has a Compaq Presario SR5507F. She is old and doesn't know much about computers. She told me she had a message that an update of Windows was necessary, so she hit 'continue' and walked away. When she came back, the computer was restarted on a screen, she had never seen before: a black screen, with the 'C' and "Compaq" logo in red in the Center, with " and " on the lower left and " and v5.27 ' on the bottom right side.

  I checked to make sure that the keyboard was solidly connected - the NumLock lights etc flash momentarily when the computer starts.

  We have tried pressing ESC, F10 and F11, in various methods: turn on the computer, and then hit the button, turning on the computer using the button is pressed, turn on the computer and repeatedly hit the key, etc.. All had the same result - the screen with the logo of Compaq, and nothing else happens.

  I know that some on computers, but that me stem.

  Of course, she didn't know she should do a set of recovery discs, is not so... she.

  If anyone has any ideas, I'd be happy to hear.

  Hi biolabprof01,

  Sorry to hear about the sentence. There are a number of things to try. First, try the procedure described in this HP support document on Vista won't start do not.

  If you can, try to perform a System Restore or System Recovery.

  If you still cannot start and cannot access the System Recovery Wizard, you can order HP recovery disks (see the section on CD - ROM order page).

  I hope this helps. Let us know how it goes.

• Edge 15 does not start in Win10 after upgrade

  Updated 15 edge of Win8.1 to Win10 today. Everything was fine, then an installation file is stuck so I held the power button for a forced stop. When I turn on again, I get nothing, just a blank screen. (I couldn't even Lenovo logo) After an another power cycles, I saw a screen for "automatic repair", then he went and I'm still stuck on a white screen, noise from the hard drive, it is not read.

  I also tried to boot "Windows boot manager" and hard drive, both got white screen.

  Any help?

  P.s. I upgraded to Win10 once a factory reset to Win8.1, so I do a factory reset, but it seems impossible to get to the option more.

  Thanks for your help, I've actually made a diagnosis of HD and found too many errors, I'll replace the HD.

• MY dell inspiration does not start, it will only in Safe Mode

  MY dell inspiration does not start in normal mode, in safe mode. I have windows vista. any help please. Thanks in advance

  Hello

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig
  4. Then press enter on your keyboard.
  5. The System Configuration utility opens
  6. Make sure that Start Selection is set for Normal start.
  7. Click the Startup tab.
  8. Make sure you start is not checked
  9. Press the apply button and then press the OK button.
  10. Click the restart button to restart your computer.

  See you soon.

• Dell PCs - does not start

  I have a dell dimension e520 desktop pc that turns on but only the fan goes inside the pc & it does not start any HELP!

  Hi James,

  This problem may occur if there is not enough power for the computer. I suggest you to check the power to the computer. As Shawn said, you must contact the manufacturer to check for hardware problems. You can check the link for Dell technical support:

  http://www.Dell.com/support/home/us/en/04/product-support/product/dimension-E520/diagnose

  If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• My MacBook does not start and fires after the Apple logo. I received this error via FirstAid detail in disk utility.

  Hi Apple/community,

  I need a help.

  What it means? Operation failed! My MacBook Pro does not start. It cuts after the loading screen. What will happen?

  

  Any help will be greatly appreciated. Thank you!

  Well, it seems that your MacBook Pro hard drive has failed and cannot be repaired by disk utility.

  Try to reboot into single user mode: How to start your Mac in single user mode or verbose--Apple Support

  If it works, try to repair the disk with this command:

  fsck -fy

  (http://osxdaily.com/2013/08/07/how-to-repair-a-mac-disk-with-fsck-from-single-us UH-mode /)

• Bluetooth support service does not start on VISTA

  When I go into the Services Panel it shows of Support Bluetooth Service is set to automatic but not started. When I try to start this service, it gives me error: 1053 indicating that the service has failed within a reasonable time. I have a MX5500 Revolution keyboard and mouse combo that works very well. But when I try to put the mini hub so he could accept the other BT devices, it hangs, freezes or crashes. I tried to uninstall and reinstall the software several times with no luck. I know that the reason that this happens, it's the BT support service does not start. Any help is appreciated.

  Hello

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not work as expected
  When you click on the element - for Windows 7 this check manually
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

  BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
  devices around you. For each detected Bluetooth device, it displays the following information:
  The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
  Last detection time and more. BluetoothView can also warn when a new Bluetooth device
  is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREEhttp://www.nirsoft.net/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
  the standard output. For each Bluetooth device, the following information is displayed: MAC
  Address, name, Major Device Type, minor device Type and possibly the name of the company of
  the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  ---------------------------------------------------------------------

  More information of possible interest to some:

  What is a Bluetooth personal area network (PAN) network?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-Pan

  Connect to a Bluetooth personal area network (PAN) network
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-Pan

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Dell Inspiron does not go in GRUB after the stop of Kubuntu

  I bought a new Dell Inspiron 15 3000 (Ubuntu) laptop and installed Kubuntu 15.10. No dual-boot. Kubuntu only.

  Everything seems to work... with one exception: after closing down (or restarting) of KDE/Kubuntu, laptop computer does not successfully start only once.

  When I shut down the system, everything seems ok. Then when you press the power button, I see the Dell logo for a short period of time (as a kind of progress downstairs bar) as usual. Then the screen flashes in different shades of black, nothing more. No GRUB menu. In this pressing situation ++ restart the laptop and GRUB is reached and everything works fine. Following restarts (without having to boot into Kubuntu) works also without problem. However as soon as I have boot into Kubuntu and start/stop from there to the next single boot of the laptop will fail.

  Any idea what the problem might be?

  I think I found the answer: askubuntu.com/.../428857

• Satellite P200: Screensaver does not start on Vista Home Premium

  Hi people!

  I tried to apply the option on my laptop screen saver (Satellite P200), equipped with Vista Home Premium, but it does not; the laptop everything continues to run after the game of elapsed time. Is this a known problem with Vista? All suggestions received with gratitude, thank you!

  ChrisB

  Hello

  Can I ask you if you use the Microsoft wireless mouse?
  I discovered that this may affect the functionality of the screensaver on Vista OS.

  Strange!

  Then maybe you should check out this MS article:

  + The screen saver does not work when you use a pointing device on a Windows Vista-based computer Microsoft wireless +.
  http://support.Microsoft.com/kb/911895

  Feedback would be appreciated.

• My Dell laptop does not start

  I have my older Dell laptop which stop the other day and I thought that the battery had just missed completely, plugged in left to load and when I got home it turns any. New laptop for my son has had this problem and tech support had me press and repeatly F key and I think that either press and hold the power button or press the key and let go? I wanted to try this with my laptop but can not remember what F key or the thing with the power button. Help please, hoping that he disappeared were ongoing work and family top photos.

  Thank you

  Hi Appieloosa,

  I suggest you follow the steps below, first to release any static power in the laptop which may cause this problem:

  1. remove the battery and the laptop AC adapter.
  2. press and hold the Power button for 20 seconds and release.
  3 reconnect the battery, AC adapter, and then press the power button.
  4. the laptop must turn if static is the cause.

  You can press the "Fn" key and the "Power" button to run the hardware diagnostics if the laptop does not power on after following the steps above.

  Please let me know your results.

• Satellite A135-S4437 does not start the Vista operating system more

  Hello

  I have a Satellite A135-S4437 old laptop computer for 2 years. It is not start the Windows Vista operating system. When I press the power button, I can't see the screen "in touch with tomorrow TOSHIBA" and below in the status bar is the option press F2 for SETUP or press F12 for the boot device selection menu.

  I tried pressing both F2 and F12, and none of these options has nothing to do. They give just 'Please Wait... "and it remains right on the screen to touch.

  Thanks in advance for any help!
  PG

  Are you can access BIOS by pressing the ESC key?
  Select this check box.

  But to be honest, it sounds like a BIOS problem, and in the worst case, you will need to ask the technician to mobile to help.

  Welcome them

• Reference Dell 760 does not start, cannot access the bios menu

  Desktop Dell 760 not start and displays a message: unsupported video configuration detected. I can't access installation or the bios menu. any ideas?

  http://support.Dell.com/

  Link to Dell technical support above.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  Reference Dell coordinated at the link above.

  I'm sorry, but we cannot help you with Bios problems.

  See you soon.

  Mick Murphy - Microsoft partner

• Computer Dell laptop does not start

  Was an upgrade and lost power or connectivity during the upgrade
  now my laptop will not boot.

  Is there a way to return to a previous start-up and it stand up, so I'm able
  use and restore updates.

  ~ tom

  Looks like the partition is damaged. I fear that even a repair check does not work, the best that we can suggest is reinstalling new windows.

• XW4400 does not start. Occurred after the power to the system off for 2 weeks. Now, does not start. Help!

  As noted above in the subject... exploded with power for about 2 weeks supply.  On his return the

  system won't start.  It keeps going in a circle.

  Here's what happens;
  

  (1) it goes to the window HP

  2) immediately goes to a window stating "windows did not start properly. A recent hardware or software change might be the cause. "Then on and other causes.  Well, none of them took place.

  To the bottom of the window there's several options to try.  Safe mode, Safe Mode Networking, last known successful... and start normally.  All the options have been tried several times.  To 30 sec timer waiting for your choice.  NONE OF THE OPTIONS WORK.  Cannot start in any mode.  After all of the selections it shows;

  (3) a flash of the microsoft windows screen and then we go back to number 1.

  Info on the system;

  XW4400

  • Manufacturer part number: ET115AV-CTO
  • Manufacturer: HP
  • Product description: ET115AV-CTO HP xw4400 Workstation computer desk
  • Product type: desktop
  • Form factor: mountable Convertible minitower on rack
  • Operating system: Windows XP Professional 64-bit
  • Processor: Core 2 Duo processor E6700 (2.66 GHz)
  • Front side bus: 1066 MHz front Bus up to
  • Chipset: Intel¿975 X Express
  • Memory: DDR - 2 667 MHz ECC unbuffered
  • Installed memory: 2 GB
  • Maximum memory: up to 8 GB
  • Installed hard drive: 160 GB
  • Hard drives: up to 4 SATA hard drives 2 to maximum
  • Expansion bays: 3 external bays of 5.25 inch and 1 external 3.5 inch bay 2-Bay internal 3.5-inch
  • CD DVD: 16 X DVD + - RW DL
  • Speed variators: controller 4 channels SATA 3 GB s integrated with RAID 0, RAID 1, RAID 0 + 1 capacity
  • Graphics card: NVIDIA Quadro FX1400
  • Expansion slots: graphics PCI Express (x 16) 1 slot 1 PCI Express (x 16 mechanically x 4 electrically) slots 1 PCI Express (x 1) and 3 long legacy PCI
  • Audio: Integrated high definition Audio with Jack Retasking capability,
  • Networking - communication: integrated Broadcom 5755 Netxtreme Gigabit PCIe LAN
  • I/o ports and connectors: front: headphone, microphone, 2 USB 2.0 and 1 optional IEEE 1394 a rear: 5 USB 2.0 1 USB 2.0 (internal) 1 serial port standard 1 keyboard PS-2 port 2 in parallel and mouse audio Gigabit LAN RJ-45 1 built-in audio microphone
  • I have no recovery disks!

  Hello:

  I can't help with your problem, because in this case, my recommendation would be to reinstall the operating system.

  What I can do, is give you information to get a set of recovery discs for your xw4400 for only $10 USD.

  Here's how:

  1. Enter the part number and the serial number on the top of the computer on the Silver label. The model # is a Compaq HP xw4400, but the part number is on this tag silver under the serial No.

  2. call HP at 1-800-952-7689, option 1 (ranking in the list in the option made restore disks).

  3. provide the information asked by the representative who answers the phone. Some simply ask for the serial No., some want at the same time, or they'll want just the serial number and the type of computer (xw4400).

  4. do you have a Master Card or Visa ready for purchase. They do not take discover. You will be charged $10.00.

  You will receive the discs by first class mail, or you can pay an additional $10.00 for shipping FedEx.

  Paul