Reference Dell 6850 don't RAID not installation

Similar Questions

• Reference Dell MD3000i add secondary RAID controller

  Service number: ADMIN NOTE: maintain the label removed by privacy policy >

  Right: OQ

  Service request: ADMIN NOTE: application number withdrawn by the service privacy policy >

  I have a MD300i in the operation that runs in mode simplex with a controller.  I would like to add a second controller and change the duplex mode for redundancy configuration, and I don't know how to properly go to this topic.    I found some documents that says to slide partially the 2nd controller and run a SMcli command to switch to the duplex mode, followed by:

  ' Add a new connection from management to the MDSM with the following command:

  SMcli 192.168.128.102-c ' setting ethernetPort [1] ipAddress = 10.37.121.54.

  gatewayIPAddress 10.37.112.1 = subnetMask = 255.255.240.0 ";

  Where the address IP 192.168.128.102 is the current IP address of the new controller, and 10.37.121.54 is the

  desired address.

  What happens if I do not know the address on the new controller?

  I would be grateful any documentation or the help that could lead me to my solution.  Thank you for your time.

  Chris

  Hello Chris,

  Here is a link to the document to upgrade your MD3000i on the way you will need to add the second controller. http://downloads.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_powervault/powervault-md3000i_user's%20guide5_en-us.pdf

  Please let us know if you have any other questions.

• Reference Dell v715w don't stay connected

  I have a Dell v715w printer.  Whenever I need it, it is not connected and I got to the point where to use it, I have to take my computer to it and connect with USB.  This is ridiculous - I bought a printer capable / wireless network so I wouldn't have to do it.

  My HP wireless all in one doesn't have this problem.  When I click on print - prints.  When I click on Scan, it scans.

  My Dell, on the other hand, can be found on the network, cannot find my computer when I want to scan, etc.  Whenever I want to use!  How can I fix it?  If this computer will work as announced, then when I try to access the device, I should be able to access the device.  I wouldn't have to restart my computer, restart the printer and have always then connect the printer to the computer via the USB cable.

  Thank you

  Jennifer

  I found a solution somewhere else suggested past to Device Manager and disable the option "Power Off" on the tab power management for Wi - Fi device under the heading network.  I'll try and see if it works.  I will present what I find.

  Steps to follow:

  (1) open device - control panel, system, Device Manager management

  2) click on the + sign by network to display the network hardware

  (3) make a right-click the wireless adapter and select Properties

  (4) open the power management tab, and uncheck the option "allow this computer to turn off this device to save power".

  It will be nice if it works, but I still don't understand why I have to do for my Dell, but not for my HP All In One.  Sounds like a faulty design for me.

• Reference Dell v305 problem black cartridge not aligned

  my printer dell 305 said all of a sudden the black cartridge is not aligned properly (otherwise it is said to remove the Strip). If I take the cartridge and reinsert it, I get the same message. If my printer is broken or do I have to just buy a new cartridge?

  scs822,

  Do you use Dell Series 9 ink cartridges?

  If you unplug the printer from the wall and remove the brick of power for 60 seconds, this will reset the error messages that the printer. I would then plug everything back in.

  Turn on the printer.

  Open the printer (power on) and remove the Dell Series 9 black cartridge and then reinstall it. I then remove the Dell Series 9 color cartridge and reinstall it. Now, close the printer, and it will print an alignment page.

  Error messages?

  Print Cartridge black = Black (left) cartridge = color (right side)

  photo cartridge = cartridge black (left side) = color (right side)

  Dell Series 9 ink cartridges have a sensor to them that cannot be reset. Article on Dell ink cartridges filling.

  Dell Series 9 ink cartridges can be purchased at Staples, Wal-Mart or any Dell website.

  It is possible to get an ink cartridge Dell Series 9 with a bad sensor. I would take these to the place of purchase for a replacement.

  Rick

• Reference Dell inspiron 14z turns is not on!

  I bought a dell inspiron 14z 5423 one two months ago, today morning I press the power button and nothing! no response no sound!

  When the power adapter on, no light on the dell. but on the green card of the light. What is the problem?

  p.s its ultrabook and I can not eject the battery.

  Hi Oren1033,

  I apologise for the inconvenience. I ask you to disconnect the AC adapter and reboot the system. To reset, use a paper click or PIN to reset the system by inserting the sharp tip in the hole under the laptop reset security. Refer to the image below:

  

  NOTE: Resetting the system causes the unsaved data to be lost. The reset option resets the laptop or the operating system to factory settings. By pressing the button Reset turns off the system.

  If the problem persists even after reset, check if the system starts and runs diagnostics on hardware from the system. Hold down the Fn key and the power of the computer. See also the following link for assistance.
  http://Dell.to/16KQ3r0

  Reply to this message with the status.

• Reference Dell inspiron n4050 integrated webcam not working do not.

  I'm already installed Dell Webcam Manager. But when I tried to capture an image, he said "no webcam driver supported detected. Please install the webcam driver using the dell Resource CD, and then restart the webcam Center. "

  My unit model is DELL INSPIRON N-4050 and installed 64-bit Windows 7 Ultimate edition. I did not come with drivers CD and I do not know where to download the driver for the webcam it is. I also make troubleshooting and checked the Windows Device Manager, it shows that the built-in Webcam is installed under imaging devices, and the driver is up-to-date.

  Hello irfan mir.

  Welcome to the community,

  With Windows 7 webcam driver should get installed automatically. It might be the Webcam Application that does not work properly. Try to uninstall the Webcam of the System Manager (Control Panel, programs and features, select Manager of Webcam, click on uninstall).

  Restart the system and install the application Webcam Central from this link below:

  www.dell.com/.../DriverFileFormats

  Let me know if you need more help,

  Thank you

• Reference DELL monitor U2414H monitor will not work with DELL Optiplex 755

  I can't get my new U2414H monitor to work with my PC Optiplex 755 Ultra small form factor. The PC has a DVI offline andf the monitor has a display port, mini display port & 2 hdmi ports. I tried a display port converter for mini display port, a Display port converter / STANDARD display port. but the screen didn't poster no matter what exit. The PC works with other monitors. Can someone help?

  OptiPlex Ultra small form factor:

  http://www.Google.IE/URL?SA=t & rct = j & q = & esrc = s & frm = 1 & source = web & cd = 1 & ved = 0CCEQFjAA & url = http %3% 2F % www.dell.com%2Fdownloads%2Fglobal%2Fproducts%2Foptix%2Fen%2Fopti_755_techspecs.pdf 2F & ei = efk8VKOoJabj7QairID4Ag & usg = AFQjCNHdgV7iSDzhisyqC3_tHf-7JYicFg & bvm = bv.77161500, d.ZGU

  You should use DVI to HDMI which will make the video, but will not have audio.  There is no possibility for a ULTRA-COMPACT HDMI because it has no slots. There is NO display ports any on a 755 ultra-compact.

  http://www.microcenter.com/product/305974/DVI_to_HDMI_Adapter_for_Radeon_HD_4000-3000_Video_Cards

  

• Reference Dell Factory Image Restore will not work.

  I have a Windows Vista laptop and I got a virus so I went to the system recovery options to restore it to a factory State.  It starts, but it doesn't actually do anything, and now my computer won't even fully start.  Just, it starts and load the Dell page and then bar Windows load and then it starts the startup repair but nothing is ever able to set.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  Above is the use of the Dell Recovery Options.

  If you have problems using the Dell recovery process, contact Dell directly.

  See you soon.

  Mick Murphy - Microsoft partner

• Reference Dell backup and restore will not be updated

  I have just updated to Windows 8. 1.

  When I checked the notifications told me that Dell backup and restore was inconsistent and I needed to re - install. Before all else, I checked the Dell website and it is advisable to update the program by opening and clicking Update.

  Unfortunately, when I click on control upgrade tells me that my request is updated according to the picture below.

  

  Is there another way to update the application?

  Go to www.dellbackupandrecovery.com

  Uninstall the old version and install new then.

  Here's a direct link:

  www.dellbackupandrecovery.com/Dell_Backup_and_Recovery_1.7.5.64.exe

• Reference Dell coming 8 Pro does not charge?

  I bought this from amazon and it arrived fully charged. I used it for about 3 days and I die last night while watching a video. Let him load 3 hrs today with the unit off and then when I he turned the dough only said charge of 2%. I use the charger supplied with the device and the light is on when he is in charge

  Another problem may be the Port extremely poorly designed on the venue...  It has a USB Port to the Micro-A, and they ship a USB Micro-B plug.  Of course, making works, but port is rectangular and the CAP is trapezoidal.  (See pictures attached)...  A bit like putting a round plug in a square hole.  It can be connected that it in itself, but only works one way, and if you plug it in wrong, you can break something.  A clue would be the USB image on the form itself must face the FRONT of the place when you plug...  Large part of the connector down, party narrow the decision-making upward.

  The document shows, type a contradictory picture of the USB plug.  It shows the metal part of the plug upside...  In any case, see two photos I have attached for clarification.

  Thank you

  BigDellDude

  On the narrow side is supposed to be in PLACE.

• Reference Dell Eql SANDRA use only not all configured NIC

  Have 1 virtual (in hyper-v) server with 4 NICs. Server OS Sp1 with EQL ASM Win2008R2 is version 4.5. The lan NIC is excluded by subnet in auto-snapshot manager/MPIO settings.

  3 SAN adapters are in a different subnet and are "inclusive". The 3rd nic has no active sessions to the storage group. Tab connections ISCSI MPIO confirms its authorized to connect to the San. Instead of 3 connections to the volume on 3 network cards, he made 2 connections to 1 etc...

  I tried the EQL ping to IP configured for that particular network interface card, got no response. The 2 other IP's ping requests. Checked the Hyper-V host; The NIC 3 are in the same Vlan. This virtual server is the only one connected to the San with this problem.

  Any ideas on why and how to solve this problem?

  I was talking about the specific cable and port associated with this NIC there could also be a bad network card.

• Abdoulaye recently I received 3 important updates for my windows vista Home premium (my knees is dell inspiron), but he is not giving facility haven't faced error I tried to do one by one, but do not install it

  Abdoulaye recently I received 3 important updates for my windows vista Home premium (my knees is dell inspiron), but there is not installation giving error code (643). Even I tried to do one by one, but do not install it

  Hi HazemRagab,

  Failed to verify who has had updates to install. Follow these steps:

  Start, all programs, windows update, view the update history

  Follow the steps in the article.

  http://support.Microsoft.com/kb/976982

  Reference: http://support.microsoft.com/kb/2545723

• Reference Dell vostro 1520 with windows xp prof... Not reading CD/DVD

  Reference Dell vostro 1520 with windows xp prof... Unable to read & play any cd/dvd.tried mr.fixit content but no solution at the moment.

  Hello

  1 have. what fixit you tried?
  2. don't you make changes to the computer before the show?

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  Important: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in the window.

• Reference Dell 760 does not start, cannot access the bios menu

  Desktop Dell 760 not start and displays a message: unsupported video configuration detected. I can't access installation or the bios menu. any ideas?

  http://support.Dell.com/

  Link to Dell technical support above.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  Reference Dell coordinated at the link above.

  I'm sorry, but we cannot help you with Bios problems.

  See you soon.

  Mick Murphy - Microsoft partner

• Reference Dell all-in-one printer 922-is not recognized in windows 8

  Dell all in one 922 printer works is not in windows 8

  Hi Linda,.

  You can visit the link next to the Windows Compatibility Center that describes the Dell 922 Photo all-in - one Printer is not compatible with the Windows 8 operating system:

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=Dell%2Ball%2Bin%2Bone%2Bprinter%2B922&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  However, you can try to install the printer in Windows 2000 or Windows XP compatibility mode and check if this solves the problem.

  Reference Dell Photo All - In - One Printer 922, v.G21, A04

  http://www.Dell.com/support/drivers/us/en/04/driverdetails?DriverID=R102523

  To install printer drivers in Windows 2000 or Windows XP compatibility mode,

  a. right-click the installation file, and select Properties.

  b. click on the compatibility tab.

  c. in compatibility mode, check the run this program in compatibility mode for: option.

  d. Select available options under Windows 2000 or Windows XP .

  e. click apply and OK.

  See the link below for more information about compatibility mode:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.