Reference DELL Blade - Ethernet Passthrough with ESX 4

Similar Questions

• Reference Dell GX620 Purple screen with ESX 4.1

  Hello

  I had a Dell GX620 of Otiplex box with 4 GB of Ram and 2 hard drive ESX 4.1 and all of a sudden I start to experience crashes (purple form), sometimes 3 seconds after the start of the process and others, when the system already in place, but I connect to one of the virtual machines.

  He is always coming up with some 'console/6096 PCPU0"among other error lines.

  Everyone got an old similar system and is having a similar problem? Maybe someone knows how to fix this?

  Thank you very much

  Download the memtest disc and test the RAM. http://memtest.org/#downiso Let run overnight or longer.

• Reference Dell blade Intel X 710 the Ncdb FCOE support

  Now, I'm installing system on dell blade for my client, but when I configure the Intel X 710 Ncdb not to see the CF can show only Ethernet, anyone knows this FCOE support or not? Please help me!.

  Hello

  I show that the network version of the 710 X daughter card supports FCOE. There are versions of expansion card the X 710 that support other protocols and mezzanine, but the NDC version for systems not converged ethernet.

  http://www.Dell.com/learn/us/en/04/business~large-business~en/documents~Intel-x710-dual-or-Quad-Port-10-GbE-BNDC-can.PDF

  Thank you

• Reference Dell MD3200i correct editing with IP system and the NIC for faster network speeds

  Hi all

  I worked on this project for a while now. I did a lot of research and have contacted Dell several times. I need help.

  I have 2 sets of identical to use for Hyper-V clusters servers. We bought a Dell MD3200i in November, we also bought a Dell 5424 switch and a Cisco SLM2048 switch. These servers have Real Tek 2 network cards for iSCSI Jumbo frames is 9 k

  The Dell MD3200i is two SAN controllers. Dell 5424 is the iSCSI optimized switch and Cisco is a 48 switch ports. iSCSI is on its own network that nothing else is connected to it. (There is an Iomega NAS and a promise Vtrak SAN Tech with all current domain of execution with iSCSI controller)

  Reference Dell MD3200i controller 0 Port 0 192.168.130.101 controller 1 Port 0 192.168.131.101

  Controller controller Port 1 0 192.168.130.102 1 1 192.168.131.102

  Controller controller Port 2 0 192.168.130.103 1 2 192.168.131.103

  Controller controller Port 3 0 192.168.130.103 1-3 192.168.131.104

  Cisco switch has 1 VLAN n ° 1 on it and the 130 subnet inside elements. There are 8 connections to the switch. 4 controller 0 and 1 of each of the servers. It has an IP of 192.168.132.4, but that switch IP does not make difference. Lighted Jumbo frames

  Dell switch has 2 of #1 for various things such as the domain controller, Vtrack, and SIN. Subnet 2 is 131 and has a total of 8 connectors inside. 4 in 1 controller and 1 from each of the servers. Lighted Jumbo frames. The switch IP address is 192.168.132.2

  Groups of servers. Each server node running Windows 2008 R2 SP1 and running hyper-v with virtual server clusters / storage folder on them. 2 Realtek NIC with Jumbo frames made 9 k ProdNode1 and ProdNode2 have 12 Core i7 CPU with 12 GB memory, EXNode1 and ExNode2 have 12 Core i7 CPU with 24 GB of memory.

  ProdNode1 iSCSI-1 192.168.130.110 ProdNode1 iSCSI-2 192.168.131.110

  ProdNode2 iSCSI-1 192.168.130.120 ProdNode2 iSCSI-2 192.168.131.120

  ExNode1 iSCSI-1 192.168.130.130 ExNode1 iSCSI-2 192.168.131.130

  ExNode2 iSCSI-1 192.168.130.140 ExNode2 iSCSI-2 192.168.131.140

  Portal discovery iSCSI on ProdNode1 went to 192.168.130.110 192.168.130.101 and 192.168.131.110 192.168.131.101 each of the other servers Discovery Portal have been pairs like this.

  iSCSI tab click on add 8 MPIO sessions at each of the ports on the MD3200i from Dell, target. For example, I added 1 session of 192.168.130.101 using it. Add Session,--> activate--> Advanced Mutlipath--> Local--> IP 192.168.130.110 initiator and target 192.168.131.101 iSCSI adapter. This is repeated on all servers. 4 connections for each NIC.

  The network is very slow. It revolved around 2 to 4 MB/MIN and it should be much faster. Initially, we had only the Cisco switch with only 1 VLAN and everything connected directly to it. I read somewhere that MPIO has been the problem, so I went through the same configuration but does not verify the MPIO checkbox above. Once this has been done, the network speed went up to 1.5 GB/Min but modular storage Dell was not happy, and virtual servers would fail and the connection is not very stable.

  What wrong with my setup? Can I directly home and fix the servers directly to the PowerVault and will make stable and allow for failover and redundancy NIC? I need to get this stable so I can move with something else.

  Thank you Ron

  You will need to change your system of intellectual property on this:

  rbramble

  EX-Node1 iSCSI-1 192.168.130.130

  EX-Node1 iSCSI-2 192.168.131.130

  EX-Node2 iSCSI-1 192.168.132.140

  EX-Node2 iSCSI-2 192.168.133.140

  Prod-Node1 iSCSI-1 192.168.130.10

  Prod-Node1 iSCSI-2 192.168.131.10

  Prod-Node2 iSCSI-1 192.168.132.20

  Prod-Node2 iSCSI-2 192.168.133.20

  Reference Dell MD3200i

  Controller 0 Port 0 - 192.168.130.101 Jumbo Frames 9K

  Controller 0 Port 1 - 192.168.131.101 Jumbo Frames 9K

  Controller 0 Port 2 - 192.168.132.101 Jumbo Frames 9K

  Controller 0 Port 3 - 192.168.133.101 Jumbo Frames 9K

  Controller 1 Port 0 - 192.168.130.102 Jumbo Frames 9K

  Controller Port 1 1 - 192.168.131.102 Jumbo Frames 9K

  Controller 1 Port 2 - 192.168.132.102 Jumbo Frames 9K

  Controller 1 Port 3 - 192.168.133.102 Jumbo Frames 9K

  Your iSCSI sessions will be:

  For EX-Node1:

  -192.168.130.130 to 192.168.130.101

  -192.168.130.130 to 192.168.130.102

  -192.168.131.130 to 192.168.131.101

  -192.168.131.130 to 192.168.131.102

  For EX-Node2:

  -192.168.132.140 to 192.168.132.101

  -192.168.132.140 to 192.168.132.102

  -192.168.133.140 to 192.168.133.101

  -192.168.133.140 to 192.168.133.102

  For Prod-Node1:

  -192.168.130.10 to 192.168.130.101

  -192.168.130.10 to 192.168.130.102

  -192.168.131.10 to 192.168.131.101

  -192.168.131.10 to 192.168.131.102

  For Prod-Node2:

  -192.168.132.20 to 192.168.132.101

  -192.168.132.20 to 192.168.132.102

  -192.168.133.20 to 192.168.133.101

  -192.168.133.20 to 192.168.133.102

• Reference Dell technicians who work with Microsoft scammers?

  This morning (Monday, 24 October 11) I got a call from a Technician based in India, same scenario, as Microsoft already described here. How did get my phone no and name? Well, Thursday I contacted Dell that I got a problem with my computer, open the windows, the Dell technician says that he'll call me later and asked for my phone doesn't. He called a day later and I said that friends had fixed the problem, which was Friday. Well the first thing Monday morning, I have a Microsoft technician saying that my microsoft certificate had expired and my computer will not work unless I have renewed the certificate and I pay £££. Isn't the air very coincidential? I will never buy Dell products still once, it seems that they pass the information to the crooks or they are scammers themselves!

  If you believe that Dell Technication is also involved, you may call Dell and ask another medium or ask them abuse report and when you contact Dell, you have the file number and you can use it to complain. Also, it could be going since you had call before contacting Dell.

  In this case you can take a look at:

  http://cyberdefend.WordPress.com/2010/05/14/Hello-i-am-from-Microsoft/

  In addition, how did get your phone number and the name, there are several possibilities, take a look at:

  http://cyberdefend.WordPress.com/2011/09/10/i-have-your-phone-number/

• Reference Dell Touch P2314T - working with active stylus?

  I bought this touchscreen monitor, because I wanted a bigger workspace for the drawing. I used 3 Surface with Pen of Surface until now, but I wanted a bigger screen. So, I bought a monitor Dell Touch P2314T. I was wondering, is it possible to use this monitor with the active stylus Dell here?

  I want to know if the monitor works with the stylus, and if the pressure and palm rejection sensitivity will be sustained. Thank you in advance.

  I do not know. You'll need to read through the Manual for touch screen monitors find these data.

• Reference Dell EQL PS4100xv problem with MS SQL replication

  Hello

  I have a Dell PowerEdge server R420 connected to an EQL. Is installed ESXi 5.1 U1 (free version). It is only a data store.

  VM is running Windows 2008 R2 STD with MS SQL 2008 R2 STD. The change in size of database per day is around 2 to 3 MB of base on my daily full backups via the MS SQL backup.

  However, when I throw a replication session between my EQL PROD and DR EQL which size of delta is ranging from 1 GB to 50 GB every time that I run a replication? Interval is about 5 to 10 minutes. I tried 20 minutes also the size to replicate is erratic.

  Why is so huge its more than 1000 MB per replication.

  Hope someone can help me with that.

  Thank you

  Paul

  Re: Storage Direct.  Yes, if you configure these volumes SQL replication, only the changed data will be included.  Only VM will see to all the files in the data store.   However, you still want to replicate your VMFS, but not as often as SQL datastore.

  Re: optimize.  Article I included has the registry setting you need.  This works for all storage formatted to NTFS.

  In addition, when you format the SQL data / log volumes, has the NTFS 64 K cluster size.   The default value is usually 4 or 8 K.  This will align all the writings and readings on the 64K of distribution of the EQL table size.   This improves performance of I/o.

• Reference Dell refurbished Latidude 2120 with Windows 7 Home Premium

  Why my renovated 2120 Latidude from Dell with Windows 7 Home Premium except Windows 7 Ultimate as a pure settled instead of an upgrade? My product key in the activation will not work now

  Because it is not a supported method. When you upgrade from one Windows 7 edition to another, you must use the upgrade wizard level Express Windows.

  http://www.notebooks.com/2009/10/26/Windows-7-anytime-upgrade-%E2%80%93-unlocking-more-benefits/

• Reference Dell Webcam Central starts with Skype

  I have a Dell laptop with Win 7 and Skype 6.1.  Whenever I start the Dell Webcam Central from the Skype application.  Can someone tell me how to prevent it?

  Concerning all the

  Gary

  Gary,

  Right-click on the Dell Webcam Central icon in the test system, near the clock.

  Clear the check boxes that you do not want to happen.

  

  Rick

• Reference Dell vostro 1520 with windows xp prof... Not reading CD/DVD

  Reference Dell vostro 1520 with windows xp prof... Unable to read & play any cd/dvd.tried mr.fixit content but no solution at the moment.

  Hello

  1 have. what fixit you tried?
  2. don't you make changes to the computer before the show?

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  Important: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in the window.

• Reference Dell pc with xp family. Restart to the logon screen

  Reference Dell pc with xp family. Restart to the logon screen. starts ok in safe mode. run msconfig and do that no change then do restart ok everything ok until the cold start, then hand it to restart?

  Peek into the registry to find clues.

  Disable the automatic restart in case of system error and see if you can capture a message of error checking bug (BSOD) with useful information.  Automatic restart in the event of system failure can be disabled in the F8 advanced boot menu, or you can turn it off in system properties.

  1. right click on my computer and select Properties.
  2 - Click on the Advanced tab, and then click on the Start button and recovery settings.
  3 clear the automatically restart box and OK your way out system properties.

  Start the computer in a Clean Boot State, if the computer starts successfully in a clean boot state, then one of your user programs most likely problems, look in the case of journal of indexes.

  How to configure Windows XP to start in a "clean boot" State
  John

• Reference Dell M1000e Blade Server

  Hi all

  We have Dell M1000e Server Blade, 13 3 full height and 10 low-profile, I/O switch servers are A1, A2 B1B2 are MXL blade switches and C1, C2 are Brocade Fiber switches.

  mid-height servers are M630 PowerEdge Blade Server

  with 1. Port double QLogic 57810 - k 10 GB

  2 QLogic 57810-k dual port Mezz 10 GB KR ANC card for M-Series Blade servers

  3 Emulex LPM16002 Fibre Channel i/o Card 16Gbps

  and full height blade PowerEdge M820

  1 Broadcom 57810-k Dual port 10 GB KR

  2 Emulex LPM16002 Fibre Channel i/o Card 16Gbps

  the problem is when you first start, we received this message for full height only servers

  "A fabric mismatch detected for B1 Dell Blade mezzanine card"

  and full height servers only does not illuminate they keep flashing red

  What is the problem?

  It looks like the Emulex on the M820 may be installed in wrong mezzanine card. 1 to 3 media fabric C mezzanine card slots. do you know which slit it is currently installed in? Here is some additional info on removal and installation of the mezzanine cards.

  http://Dell.to/2bZ7Ohl

• Reference Dell MD1200, H710 with R720XD

  Hello

  Asked if drieves NL - Seagate SAS (ST4000NM0023) can be used in the following configuration.

  Reference Dell Perc H710 + PowerEdge R720XD MD1200.

  The answer that I gave them was who should be tested. Because in documentation it is stated that mark Dell hard disks should be used.

  I know that some controllers Perc will give a warning each time if not dell disks are used, but they work without problems. Is this the case even when you use a box MD1200?

  Kind regards

  Indrek

  INDRP,

  You're right that only some drives are tested and supported in the bays of the MD. Here is a link that will take you to one of the manuals that list all drives supported for 1200 MD and MD1220.

  FTP.Dell.com/.../PowerVault-md1200_Reference%20Guide_en-US.pdf

  Please let me know if you have other questions I would be happy to help.

• Reference Dell M1000e + aggregator MI/O port mapping

  Hi all

  I intend to install a new chassis Dell M1000e with Dell M/o aggregator. During the time of solution, I have a few questions about correspondences between the physical uplink with NDC blade ports ports. A Please check the config below and specify my queries?

  My hardware:

  • 1 x Dell M1000e
  • 2 x M i/o aggregator (A1 & A2)
  • 16 x M630 Blade (Qlogic 57840 S ANC four ports card)

  Reference DELL M/o aggregator:

  (reserved for Future use) module QSFP + 2 ports (Port No1:33 - 36 & No2:37 Port-40)

  I want to use these two modules for my blades 4-port Quad and the confusion I had, how to associate these 16 ports (8 ports of each module) to the server blade and the amount of bandwidth I will get by blade with redundancy.

  Module 4-port SFP + 10 GbE (Flexi-O of the Bay) (Port No.: 41-48)

  Module 4-port 2/4/8 Gb FC FlexIO (Flexi Bay 1) (Port No.: 49-56)

  FYI - I would like to install ESXi 6.0 on all blades

  Thank you!!

  Vinay

  Oriented server ports are configured automatically as part of the aggregation of links groups if the server is configured for the LACP Protocol. Static GAL is not supported.

  You will use the segregation network VLAN. A VLAN for network traffic and the other for the CF. Here are the commands to configure interfaces for different VLANS.

  Unidentified:

  Dell (conf) # tengigabit interface 0/16

  Dell(conf-if-te-0/16) # vlan unidentified 4

  Output Dell(conf-if-te-0/16) #.

  Tag:

  Dell (conf) # tengigabit interface 0/16

  The tag vlan Dell(conf-if-te-0/16) # 4

  Output Dell(conf-if-te-0/16) #.

  Traffic from servers will follow the path of the VLAN. For example, if an internal server, facing the port is set to VLAN 4, that traffic will be transmitted on the uplink port which has also set to VLAN 4.

  By default, all external ports are placed in a single whole LAG. However, you can change the configuration to support several shifts of uplink. Page 159 of guys configuration takes you step by step on setting up several shifts of uplink.

  The aggregator automatically configures to match the FCoE parameters used in the switches to which it connects through its uplink ports. FIP snooping is automatically configured on an aggregator. Automatically configured port channel (LAG 128) works CWF port mode. See page 86 for more information and examples of config.

  For redundancy, you could stack the units together. 241 page details the process of stacking.

  Page 54 of 102 of the Guide blade IO has one other diagram that details more internal server port mapping for each blade.

• Reference Dell 6224 and 5448

  Hi team,

  I'm new dell switches - exposed to cisco switches. I am faced with new kinds of problems with these dell switches. Unable to provide a fix and fight for the last 5 days. Pls help me. Below is my script

  Two nw - 2.0 and 3.0 is required to be configured in VLAN, VLAN ID 2 and 3.

  VLAN 2 - 192.168.2.1

  VLAN 3 - 192.168.3.1

  N/W 2.0 and 3.0 N/W machinery will be shared 48-Port powerconnect switch 5448 DELL

  The routing part arrives at 6224 power connect - gateway for vlan 2 - 192.168.2.1 and bridge for VLANs 3 - 192.168.3.1

  The switch of two is ascending through fiber optic - spf port cable

  This is the configuration I did-

  5448 switch-

  database of VLAN

  VLAN 2, 3

  output

  interface vlan 2

  switchport access vlan 2

  GVRP enable

  Routing

  output

  interface vlan 3

  switchport access vlan 3

  GVRP enable

  Routing

  output

  interface ethernet 1/you/1

  switchport mode general

  VLAN allowed switchport General add 2.3

  GVRP enable

  output

  interface ethernet 1/g1

  switchport access vlan 2

  GVRP enable

  output

  interface ethernet 1/g2

  switchport access vlan 3

  GVRP enable

  output

  Uplink port is TE1 (Layer 2) to XG2 (Layer 3)

  Reference Dell 6224 can connect

  Configure the terminal

  interface vlan 2

  no downtime

  IP 192.168.2.1 255.255.255.0

  Routing

  output

  interface vlan 3

  no downtime

  address 192.168.3.1 IP 255.255.255.0

  Routing

  output

  interface ethernet 1/xg2

  switchport mode general

  VLAN allowed switchport General add 2.3

  GVRP enable

  Computer with 192.168.2.100 / 24 GW 192.168.2.1 connected to layer 2 switch g1 - vlan 2

  When I ping 192.168.2.1 - accessible United Nations host destination

  Even the wise

  Computer with 192.168.3.100 / 24 GW 192.168.3.1 connected to layer 2 switch g1 - vlan 3

  When I ping 192.168.3.1 - accessible United Nations host destination

  Any thing that has missed out in the configuration part / all bad entries. I'm not sure now how to treat this. Pls help me and it is an urgent task for me

  Thank you

  With multiple VLANs, you need to use the general/Trunk mode. With the help of the info we have I made a diagram to help show the location of the switches and parameters on them. Obviously things can be different, such as PVID, IP address, VLAN ID etc are all customizable to your needs. But the page layout modes and the port will remain the same.

  

  STP will not fill the VLAN on the other switches. It's probably the GVRP feature it refers. With such a short race, it is more practical to manually add the VLAN. At least for the initial Setup, then once everything works enable GVRP to accommodate future expansion of VLAN.

  Hope this helps some.