Reference Dell Inspiron 14 (N3452) ubuntu 16.04lts without a helmet

Hello , I speak very little English . I'll use google tranlate .

I have no sound on the headphones .
Unbutu 16.04lts 

Thank you

(Bonjour, je parle tres mal anglais. je vais utiliser google tranlate. Je n'ai pas de son sur la prise casque.Unbutu 16.04lts.)





sudo cat /proc/asound/card0/codec* | grep Codec
Codec: Realtek ALC3234
Codec: Intel Braswell HDMI


aplay -l
**** Liste des Périphériques Matériels PLAYBACK ****
carte 0: PCH [HDA Intel PCH], périphérique 0: ALC3234 Analog [ALC3234 Analog]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 0: PCH [HDA Intel PCH], périphérique 1: ALC3234 Digital [ALC3234 Digital]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 0: PCH [HDA Intel PCH], périphérique 3: HDMI 0 [HDMI 0]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 0: PCH [HDA Intel PCH], périphérique 7: HDMI 1 [HDMI 1]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
carte 0: PCH [HDA Intel PCH], périphérique 8: HDMI 2 [HDMI 2]
  Sous-périphériques: 1/1
  Sous-périphérique #0: subdevice #0
 
 
Thank you for your reply. Apparently this is a bug in the system 16.04 . Installation of the latest ALSA driver does not change .
The bug is referenced in ubuntu .

(Merci pour votre reponse. Apparement il s'agit d'un bug sur le system 16.04. L'installation des derniers pilote alsa ne change rien.Le bug est referencé chez ubuntu.)

Tags: Dell Laptop

Similar Questions

  • I have a Dell Inspiron and its ubuntu operating system is there a way to change it to windows xp

    I have a dell inspiron operated by ubuntu is possible to change it to windows xp

    Hello

    I'm assuming that Ubuntu is the only OS installed on the computer, and you have a XP install disc.

    The hard disk must be erased all traces of the file system,

    Download and burn to cd Darik Boot and Nuke. Start and wipe the drive hard when you are finished it will appear for XP like a new hard drive.

    http://download.CNET.com/Darik-s-boot-and-Nuke-for-CD-and-DVD/3000-2094_4-10151762.html

    Slan go foill, Paul

  • Reference Dell inspiron 531 vista equipped s won't start

    Dell inspiron 531 s fefuses Vista running at startup. Monitor shows nothing. Once I deleted pwer offers completely for about 20 minutes, it starts then as usual. This has happened for 2 weeks now

    Hello

    1 when was the last time it was working fine?

    2. don't you make changes to the computer until the problem occurred?

    I suggest you to try the steps below and check if it helps.

    Method 1: Try the steps from the link below.

     

    Troubleshoot monitor and video card:

     

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

    Note: Also, check with your diet.

    Hope this information is useful.

  • Reference Dell inspiron 1521 reinstall windows vista sp1 getting error code 0 x 80070057

    I'M JUST TRYING TO INSTALL WINDOWS VISTA SP1 DISK ON DELL INSPIRON 1521 AFTER CRASH AND GET ERROR CODE 80070057 0 X, WINDOWS WILL REINSTALL OR REPAIR CAN NOT GET ONLINE, NEED HELP

    Hello

    I suggest you follow the steps in troubleshooting section below and check if it helps:

    Error message when you try to install service packs or updates of Windows on a Windows Server 2008 or Windows Vista-based computer: "ERROR_INVALID_PARAMETER(0x80070057)."


    http://support.Microsoft.com/kb/2469239

    Hope this helps,

  • Reference Dell inspiron 15z / win 8 / disk ssd problems

    Well, tell me how it works,

    I have dell inspiron 15z with 500 GB hard drive with laptop want to exchange it to 120 GB ssd, but I can't because no media to reinstall and the whole system is on hard Bank...

    I tried to do with software usb recovery dell preinstaled originally, but when I start to install the ssd system it gives me the error message that the new hard disk must be at least 465 GB

    I tried to copy the partition that I tried to do the recovery with another software image, it simply does not. When I tried to install win from another cd that he refuses the number series, even when I used the same version. instead of this test of dell to kill my mood why don't they have just not preparing the software backup and restore Dell to facilitate the use and for SSDS too?

    I would gladly appreciate any help

    Hi Thomiq,

    The backup and restore software would seek similar configuration during the restoration. If the hardware is changed the original image may not work.

    At this point, I see that you will need the operating system disc to reinstall it on the SSD drive. Please send me a private message with serial number of the computer, name registered during the system purchase and email address so that I can check out what we can do. To send a private message, click on my name, and choose Start conversation.

  • Reference Dell inspiron 14z turns is not on!

    I bought a dell inspiron 14z 5423 one two months ago, today morning I press the power button and nothing! no response no sound!

    When the power adapter on, no light on the dell. but on the green card of the light. What is the problem?

    p.s its ultrabook and I can not eject the battery.

    Hi Oren1033,

    I apologise for the inconvenience. I ask you to disconnect the AC adapter and reboot the system. To reset, use a paper click or PIN to reset the system by inserting the sharp tip in the hole under the laptop reset security. Refer to the image below:

    NOTE: Resetting the system causes the unsaved data to be lost. The reset option resets the laptop or the operating system to factory settings. By pressing the button Reset turns off the system.

    If the problem persists even after reset, check if the system starts and runs diagnostics on hardware from the system. Hold down the Fn key and the power of the computer. See also the following link for assistance.
    http://Dell.to/16KQ3r0

    Reply to this message with the status.

  • Reference Dell inspiron n4050 integrated webcam not working do not.

    I'm already installed Dell Webcam Manager. But when I tried to capture an image, he said "no webcam driver supported detected. Please install the webcam driver using the dell Resource CD, and then restart the webcam Center. "

    My unit model is DELL INSPIRON N-4050 and installed 64-bit Windows 7 Ultimate edition. I did not come with drivers CD and I do not know where to download the driver for the webcam it is. I also make troubleshooting and checked the Windows Device Manager, it shows that the built-in Webcam is installed under imaging devices, and the driver is up-to-date.

    Hello irfan mir.

    Welcome to the community,

    With Windows 7 webcam driver should get installed automatically. It might be the Webcam Application that does not work properly. Try to uninstall the Webcam of the System Manager (Control Panel, programs and features, select Manager of Webcam, click on uninstall).

    Restart the system and install the application Webcam Central from this link below:

    www.dell.com/.../DriverFileFormats

    Let me know if you need more help,

    Thank you

  • Reference Dell place 11 Pro - can it work without battery, with power supply connected?

    Dell coming 11 Pro can be used without battery, with power connected?

    Yes, works perfectly on AC only.   Keep in mind that if you have a sudden loss of power that you might have some issues such as loss of data, corruption of data, etc..    As if you lost power on a laptop (without battery) or a desktop computer.

  • Dell Inspiron 13-7352 ubuntu installation?

    Hello.

    I bought this phone today, I put my USB to boot ubuntu, press F12, select USB and Ubuntu install, run, and then the system has been installed.

    When the laptop has rebooted the screen is stay at purple screen :(

    The same memory has been tested in other laptop and work: S

    Why can't I install linux? I need gnu/linux because I am developer and is very important to my work.

    If Dell has no linux support I need change the laptop and buy HP laptop (like my last laptop)

    Kind regards!

    I got it to work! It took a while, but that's exactly what I did. I'll try to enlighten as much the problem as I can.

    Step 1:

    Download Ubuntu LTS 64 bits of Ubuntu.com 14.04.2

    I have not tested the latest version then I would say using the LTS version because it certainly has support for UEFI systems. It MUST be 64-bit. 32-bit has no support for UEFI systems.

    Step 2:

    Download UnetBootin Linux Live USB Creator. This Boot Disk Creator will make bootable using UEFI which is ABSOLUTELY necessary.

    Step 3:

    UnetBootin allows you to create the startup disk.

    Step 4:

    Press the start menu and reboot the PC while now the key [SHIFT]. This will take you to the advanced boot of the windows boot loader menu.

    Step 5:

    In the advanced boot menu, press 'Use of a device' and boot from the USB drive.

    Step 6:

    Select "install Ubuntu along beside the bootloader windows"(or something smilar) installing Ubuntu. "." This will install correctly.

    THEN YOU'RE DONE!

    I hope this helps! Finally, it worked for me!

    Sources:

  • Reference Dell inspiron 660 s guard closure

    My 660 s relatively new Inspiron keeps hutting down by itself - if I try to print it stops down, if I have access to my videos it stops. Sometimes she just stops unless I try to access anything whatsoever. Can anyone help? Please e-mail me - it's too recent to have problems...

    Hi Keith,

    We need after the details.
     
    (1) don't you make changes to your computer's power settings prior to this problem?
    (2) do you have any third-party security software or antivirus installed on your computer?
     
    Follow the troubleshooting methods listed here.
     
    Method 1: Run the troubleshooter of power.

    Follow the steps below:

    (a) press Windows + W together.
    (b) writing Troubleshooting in the search to the corner box and press on enter.
    (c) click the Troubleshooting tab.
    (d) click the option all view in the upper left corner.
    (e) select the options power from the list.
    (f) click Next to launch the troubleshooter of power.

     
    Method 2: Analyze and run Windows Defender in offline mode.

    Start your computer in safe mode and then run the analysis.
     
    With the parameters of Windows startup screen (formerly advanced startup options), you can start Windows in different advanced troubleshooting modes, so you can find and fix problems on your PC.
     
    Please follow the steps in the link below to your computer in safe mode.
     
     
    Windows Defender offline can help eliminate these hard to find malicious and potentially unwanted programs using definitions that recognize the threats. Download the appropriate file depending on the version of bits in your computer.

    What is Windows Defender in offline mode?

    http://Windows.Microsoft.com/en-GB/Windows/what-is-Windows-Defender-offline

    Important: during the analysis of the disk hard if bad sectors are found, the parser attempts to repair this area, all available on which data may be lost.

     
    If the problem persists then, I suggest you please contact the manufacturer that it might be a hardware problem.
    You can contact then here.
     
     
    Write to us if you're still having problems. We will help you.
     
  • Reference Dell Inspiron 660 beeps repeatedly at startup

    Hi, having a terrible problem with my 660 Inspiron I've had since June 2012

    Stop normally last time used, started at the present time, the dell screen then showed a black screen and the Office repeatedly beeps (does not stop)

    very worried, what's the problem?

    Continuous beep low and slow is bad RAM.

    Remove all the ram and see if the model changes.

    Then put 1 stick of RAM at a time to test.

  • How to transfer my current hard drive to a newer hard drive on the same computer. Reference Dell inspiron 1501

    IM upgrading my hard drive of 80g on this computer on a hard disk of 160g with OS windows xp sp2 on it. transfer of Windows do not read my card I tranfered my files and settings.  Why is this?

    Do you have a Dell operating system CD?

    Refer to 85/86 manual pages:
    http://support.Dell.com/support/eDOCS/systems/ins1501/en/om_en/PDF/HN926A00.PDF

  • Reference Dell Inspiron 1090 recovery Duo

    I've had my Dell for two years now. Recently, I decided that it was time to bring the computer back to the original image. I started using the system restore to create the recovery disk using an external drive from Lite-on. Which went well, twice. Each resource that I saw online says I should press F8 at startup from the BIOS. Well, there's not a F8 on this particular model, just a F2 for boot parameters and F12 for advanced settings. So I tried to boot from my restore disk created. I received an error message indicating that a restore point is not found. Really, a restore point for a recovery disk? That was my thought. Then, I tried to find a reset in the BIOS settings. No chance here no more. Somehow, my computer does not display the recovery partition, but a disk manager. In addition, it has contained many online and technical support to Dell Datasafe Local, but my camera uses Dell Datasafe Online. So, it's a waste. I think that Dell needs to get there directly made online for all models and resources.

    I am at a loss, because the next step is either a person with specialized knowledge available here help me, or pay extra for technical support, if I can get my OS (Windows 7 32 bit).

    Anyone know wtf I don't properly?

    BTW, this rubbish does not provide a recovery disk is a different business plan to increase revenues through the sales and service. Of course, unless everyone began to call, complain or boycott the products without recovery disks, nothing will ever be done. What is everyone's thoughts on this?

    Try the following steps if you are not able to access press the F8 Advanced Boot Options.

    • Start the computer
    • Click the Start button or the button of Windows on the corner of the left side of the screen.
    • In the find programs and files above the Start button, type CMD.
    • Then right-click on CMD in the programs, and then click Run as administrator.
    • Success popup, UAC (User Account Control) would continue.
    • The CMD (command prompt) window will go up.
    • In CMD, type the command REAGENTC /BOOTTORE, (there is a space before the slash) and then press ENTER.
    • I must say successful operation.
    • Close the CMD (command prompt), then restart the system normally.
    • You would be able to see the screen windows are loading the files.
    • Wait it is System Recovery Options and then click Next.
    • Select your name (user account) in the menu drop-down, enter the password for the connection, and then click ok.
    • You should be able to see the recovery tools.
    • Hit the Dell Factory Image Restore and then follow the steps for PC Restore.

    I hope this helps.

  • Reference Dell inspiron 1501

    print spooler will not charge come 1068 error when itry to load the software

    Hello

    1. which version of the operating system are you using?

    2. What is the software that you are talking about?

    3 did you do changes on the computer before the show?

    4. What is the full error message?

    Method 1:

    If the operating system is XP and you get the error when you try to install the driver and then visit the site mentioned below:

    The print spooler process (Spoolsv.exe) crashes while it is copying files printer driver on a computer that is running Windows Server 2003 or Windows XP

    http://support.microsoft.com/kb/953546/en-us.

    Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows XP

    http://support.microsoft.com/kb/322756/.

    Method 2:

    I you suggest to start all the services of the dependence of the print spooler service and then try to restart the spooler service to and check if the problem persists.

    To do:

    a. click Start, type services.msc in the search box and press enter

    b. right-click on print spooler and then click Properties

    c. click the dependencies tab. The first box list all system services that must work for the print spooler start. What are the dependencies

    d. take note of each service, click OK , and then restart each service on which the print spooler is dependent, if the service is not already started. If a service is not started, right-click, click Properties , and then verify that the startup type is Automatic.

  • Reference Dell inspiron 8100 protected by a password authentication system?

    is anyione know how to enter the system without knowing the administrator or the master password. I bought this laptop a few years back used.    I used it for about a week then store by getting a new office.  I have no problem with this system of password at this time. It never occurred. But now I get it back and it passwrd apply that I did not.    Maybe I put this question to the wrong forum. If so can u direct me to the right? Thank you

    I am looking for 'Leo ask' if I were you.  Maybe you'll find an answer here or by using search engines like Bing or Google.  You could even ask for help in the Forum.

    This forum is for people who need assistance with Microsoft Security Essentials, so we need to refer you to the Windows Forum: http://answers.microsoft.com/en-us

    The official MS position is reproduced below: http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/keeping-passwords-secure-microsoft-policy-on/3eba3150-8742-4264-be9f-0daaad2282cd.

    Good luck... you may need to consider an OS reinstall and "start over".

Maybe you are looking for

  • GarageBand will not play Mid-note

    During playback, when I jump the playhead in the distance in the single set song Garageband (version 10.1.0, on a Macbook Pro Retina early 2015) will be a recently struck note after all what I am in the middle of. Which means long synth keys don't pl

  • Satellite 4090XCDT - no chance to get into the Bios

    My Satellite 4090XCDT I have no chance to enter the BIOS.Press ESC and turn the unit on does not work. Only the bootlogo "in touch tomorrow toshiba" is displayed. Only the F12 key to work, where I can update the bios.I did this (version 8.20) and the

  • Define Associations & no Audio for DVD

    Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: (1) by clicking on my E: drive and try to play a DVD: "this file has no program associated with it for performing this action. Create and

  • System Windows Thread Unhandled Exception (no file name) 8.1

    I have the BSOD with system Thread Unhandled Exception (no file name).  The mindump files are in https://www.dropbox.com/s/6eawzv654f3xmqp/091615-3859-01.zip?dl=0. The only other symptom is that when it restarts I have no ethernet connection and it m

  • Extract system definition add timestamp file name

    Is it possible to add a timestamp (or sysdate) to a definition of extract file name?  In the form of definition of extract, tab out, there is an option to add the simultaneous request_id the file name - is possible to do this with a timestamp?