Reference Dell place 11 Pro 7130, how to activate the quick start Intel?

Similar Questions

• Reference Dell place 11 Pro 7130

  Hello

  I recently buy the renovated site of Dell pro 7130.

  The Tablet is absolutely fine and works very well it was preloaded windows 8.1 pro version.

  But in this tablet, my camera does not work when I start windows's default camera app that it says please connect your camera. See nothing in Device Manager, I tried to manually switch the unit Imaging section but failed each time, I haven't updated all the latest drivers from Dell still no luck, also check that the camera is turned on in the BIOS.

  Can anyone please help and give me the driver for this device. or doe which means my camera died completely?

  Hello

  I have EXACTLY the same problem AND I tried EXACTLY the same things you did... you found a solution to this problem?

• Reference Dell place 11 Pro shipping disappointment

  I am writing this primarily to express my frustrations and I hope that someone at Dell will take notice because I think to complain to someone on the phone at Dell will fall on the deaf ears and will be a waste of time.  It seems that we, the consumers are at the mercy of Dell and for me, this is unacceptable.

  A bit of history.  I ordered a Dell coming Pro 11 the day where he was available to order (11/8).  I had a few changes, I had to make to the order, remove their extended maintenance guarantee and remove the stylus and the keyboard - no change in reality have been made to the tablet itself.  This has been done on 11/11.  I never received a confirmation email from Dell telling me when should I expect my 'New' order, but I have received an order number of the person that I spoke, which was the only way I could follow the command.  The 'new' had a date of expected delivery of 12 to 18.  It seemed reasonable to me and I was happy to wait and excited.

  In the meantime, I started to order accessories - screen protector and a 64 GB MicroSD in preparation for the arrival of my tablet.  18 I still had not received my being shipped order notifications and Dell sent an email about why, or when I would expect it.  I had received SEVERAL phone calls indicating that the order was in production and should be here 12/18.  I think that on the 18th or 19th I checked the Dell order support site to see that the issue had been delayed until 02/01/2014.  I was shocked... and spoke to the person who asked me the prescription being in production about why it had not been shipped.

  The 2nd came and went, and still, only, I received a phone call from the rep of Dell indicating the order had been pushed back to 9, then on the 9th, declaring that it had been postponed until the 16th.  This morning I checked the Dell support site to be notified that the scheduled delivery date is 01 23, 2014.

  I canceled the order this morning because I don't think I, or someone else should wait indefinitely for their order to arrive once his promised summer unnecessarily.  The "estimated delivery date" is a joke and does not reflect exactly any time in which the order could actually ship.

  Looking on the Dell website, you can order a Tablet Dell place 11 Pro with the 16/01/2014 estimated shipping date all the way until 06/02/2014 depending on the type of Tablet that you choose.  I know I'm not the only one who had this problem and I hope that more people shut up someone at Dell reviews and change the way they do business.

  I work in the COMPUTER industry and I am highly disappointed by Dell.  For now I'll only order Dell hardware for the company I work for. However, we will have to reassess these orders as well.

  Thanks for listening/reading my rants, and I hope that others have had better luck I have.

  Michele

  Hi Michele Riley,

  Please this post in the forum for more quick help customer care.

  http://en.community.Dell.com/support-forums/customercare/

• Satellite Pro A100 - how to activate the shortcut keyboard-support on Vista?

  Hello. I've recently updated my satellite pro a100-828 to windows vista, and things work well to a large extent with two exceptions:

  1. I can't figure out how to activate the shortcut keyboard-support: media-keys to the left and the fn keys do nothing. There seems to be no shortcut keyboard-utility for windows vista in the drivers * tion. So what to do?
  2. the standby electricity utility is not available, which is good because of the power saver new vista. Except that I can't dim the screen, so the battery does not last me too long. How can I do this?

  Thanks in advance
  Best regards
  Christian

  Hello

  These problems can be solved in a few minutes. You only need the added package Toshiba. It contains the driver for the FN - key, Toshiba Power Saver and more useful tips.

  Here you can download:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck! :)

• Satellite Pro U200 - how to activate the bluetooth connection

  How to activate the bluetooth connection?

  Hello

  First check to see if your computer supports BT
  If the laptop supports BT, then you should find a BT tag at the bottom of the unit.
  If there is no label then your machine was not equipped with internal BT module!

  If the laptop supports BT, then use the FN + F8 key to go to the BT
  Then BT should start installation and configuration.

  For more details, see this forum and this Toshiba BT Portal:
  http://APS2.toshiba-tro.de/Bluetooth/?page=FAQ

• Reference Dell place 8 pro and 3g mobile hotspot

  Hey dell community.

  I have a place of reference dell 8 pro and I tried to get my Tablet for work with the mobile hotspot!

  When I plugged it it will say limited.

  None fixes please?

  Bobby Burgess

  Hi Bobby,.

  I found this thread on the venue Pro 8 and of connection to wireless networks / hot spots.  Try the suggestion in this thread and see if it helps.

  NOTE: I copied on the steps of resolution here as well in case anyone wants to see it.

  When sometimes, I had this problem, a deep discharge set: with power supply not connected, press the button of the Tablet for 30 or 60 seconds, including after the Tablet died;  Let the Tablet turned off for 2 minutes; and restart.  Have been informed by Support technique Dell that the cause is a buildup of static electricity, which avoids deep discharge.

  Todd

• Reference Dell place 11 Pro and Dock

  Hi all

  I have a Dell coming Pro 7130 11 and the docking station. I can't have an external display to work using the HDMI port or display connectors. I have 2 Dell E198WFP (1440 x 900), the two connecting using DVI inputs. Display sometimes appears, but does not have the resolution or refresh rate tries to run at 75 Hz despite being set at 60 Hz

  AFAIK drivers etc are all up to this date, the tablet can connect to an external monitor using the construction to the mini HDMI port without problem?

  Any suggestions, anyone please?

  Hi, the dock rarely works for me... the workaround I found is to unplug power dock and plug back in. (works 95% of the time, I get the monitor like that). It is with the 7130 model.

• Reference Dell place 11 Pro - problems with the PXE boot

  Before buying a large number of these tablets (11 Pro 7130 venue), I have to ensure that they can be deployed from MS Configmgr (2012). So far, I have no chance for our test model to perform a PXE boot.

  Following the instructions documented by Dell here:

  

  I have a USB dongle to Ethernet Lenovo based on the AX88772B chipset... that is supported according to the documentation. However, try to perform a PXE boot, the screen hangs on the message:

  -----------

  check for the presence of media...

  on ipv4 pxe boot

  -----------

  After awhile, it starts up and then hard disk. BIOS version is A14.

  Any help would be appreciated!

  We have solved this problem by following these:

  

  

  .. DHCP basically has to manage a little different UEFI devices.

• Reference Dell place 11 Pro - Dell Netready (HSPA +) with O2 sim card

  Hello everyone

  I would buy a Dell coming Pro 11 but it is essential for me, the presence of a cellular modem (3G / HSPA +) to connect whenever I want, without a wireless point.

  The Italian Web site Dell offers two solutions: one "for businesses" with a wireless Dell 5570E network (3G / HSPA +) cellular modem and the other "for the home" with a Dell Netready (HSPA +) with cellular modem (model CNV1M02) O2 sim card. Since I'm a soldier without VAT, I don't think I could buy the solution for companies (am I?), so I have to buy the one with O2 sim card.

  What I would like to ask is:

  (1) what is the difference between the two cellular modem? They have different performance?

  (2) if I buy the one with O2 sim card, I will be able to use the cellular modem with a different sim card (O2 is quite exspensive) or is the SIM blocked somehow (hardware or software)?

  Thank you very much

  Best regards

  There is no difference between Dell Netready with sim card O2 and Dell Wireless 5570E. Tablet using 5570E HSPA + / 3 G modem and it did not all simlock. I ordered V11 Atom with Dell Netready, and now I use with several mobile internet providers (Poland).

• Reference Dell place 11 Pro - can it work without battery, with power supply connected?

  Dell coming 11 Pro can be used without battery, with power connected?

  Yes, works perfectly on AC only.   Keep in mind that if you have a sudden loss of power that you might have some issues such as loss of data, corruption of data, etc..    As if you lost power on a laptop (without battery) or a desktop computer.

• Reference Dell place 11 Pro - load and power Question

  I have an i5 Vpro coming 11 Pro.  I also have the mobile keyboard. When I use them together power seems to draw everything first on the tablet.  I say mostly because the battery level drops faster than the mobile keyboard.  I searched the postings here and which seems contrary to what others have said, it is expected to be drawing from the battery first.

  If anyone can confirm this?

  Thank you!

  Mike

  I have the i5 VP11 Pro, 256 GB, 8 GB of RAM, and I use it with the mobile keyboard regularly. I am typing on right now. I can confirm that power is drawn from the keyboard first. In fact, mine will drain the keyboard up to 0% before application of the Tablet battery.

• Satellite Pro L770 - how to activate the HDMI connection?

  I have a problem with my HDMI! I connected the HDMI cable to my laptop (L770) and my TV and TV recognized that an HDMI cable is connected. Now, I want to activate the HDMI connection on the laptop with +, but I only have the 4 following posibilities: LCD, LCD + CRT, CRT, LCD + CRT judgements.

  Who could tell me, how do I activate the HDMI? Sould I see a HDMI device in my Device.Manager?

  Thanks 4 your help.
  Tom

  Hello

  Hmm, in some cases the BIOS contains an HDMI output option.
  In your case, I recommend to check this.
  I have not very well if this available but it s m of a value in a control.

  But usually the Fn + F5 should work as described in the user manual... did you check that?

• Satellite Pro A200 - how to activate the new device LAN card?

  Hello.

  I have a Satellite Pro A200 and I replaced the card with an Intel 5100 (512AN_MMW) wireless and it detects OK and installs the drivers etc, but it does not work because he says that the switch is turned off on the front of the laptop. The switch is on I also tried pressing fn + f8, but it still does not work.

  The laptop is running Windows 7 64 bit

  Kind regards.

  Hi evo8.

  What card WLAN have you had before and do the work of a former?
  I think that it of difficult to say why it doesn t work but maybe this card is not compatible.

  By the way: do other FN keys FN + F8 work or simply not?

• Reference Dell place 8 Pro WiFi question

  It seems I have disable Wi - Fi by the 'switch' itself or in "Airplane" mode, it of a pain to get and my hand "disable WiFi together, then re-enable joggin WiFi market til it seems take I'm trying to turn it back on." I am just trying to turn it off to save the battery immediately, but is this normal? A suite fix will come because i ' ts a pain at the moment.

  I have not tried the audio but I thought the problem with WiFi, put up-to-date are you tablet with all the venue of dells 8 pro drivers and software, if he says the driver or software is newer than what is installed to cancel this installer and move on to the next. Then, turn Bluetooth off then turn it back on and hold the Bluetooth, I have not lost WiFi yet since I have done this. Good luck!

• Reference Dell place 11 Pro - SD card does not recognize the card

  Anyone else have this same problem? I got my 11 Pro last night (from Dell direct) coming, I tried several SD cards, and none of them does not seem to work. It does not recognize that anything has been inserted into the slot. Very frustrating.

  Out of curiosity, have you tried different formatting on SD cards to see if it helped the recognition (eg. exFAT, NTFS)?

  -Woody