Reference Dell place 11 Pro - Dell Netready (HSPA +) with O2 sim card

Hello everyone

I would buy a Dell coming Pro 11 but it is essential for me, the presence of a cellular modem (3G / HSPA +) to connect whenever I want, without a wireless point.

The Italian Web site Dell offers two solutions: one "for businesses" with a wireless Dell 5570E network (3G / HSPA +) cellular modem and the other "for the home" with a Dell Netready (HSPA +) with cellular modem (model CNV1M02) O2 sim card. Since I'm a soldier without VAT, I don't think I could buy the solution for companies (am I?), so I have to buy the one with O2 sim card.

What I would like to ask is:

(1) what is the difference between the two cellular modem? They have different performance?

(2) if I buy the one with O2 sim card, I will be able to use the cellular modem with a different sim card (O2 is quite exspensive) or is the SIM blocked somehow (hardware or software)?

Thank you very much

Best regards

There is no difference between Dell Netready with sim card O2 and Dell Wireless 5570E. Tablet using 5570E HSPA + / 3 G modem and it did not all simlock. I ordered V11 Atom with Dell Netready, and now I use with several mobile internet providers (Poland).

Tags: Dell Devices

Similar Questions

  • Reference Dell vostro 1520 with windows xp prof... Not reading CD/DVD

    Reference Dell vostro 1520 with windows xp prof... Unable to read & play any cd/dvd.tried mr.fixit content but no solution at the moment.

    Hello

    1 have. what fixit you tried?
    2. don't you make changes to the computer before the show?

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.Microsoft.com/kb/982116

    Important: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in the window.

  • Reference Dell MD1200, H710 with R720XD

    Hello

    Asked if drieves NL - Seagate SAS (ST4000NM0023) can be used in the following configuration.

    Reference Dell Perc H710 + PowerEdge R720XD MD1200.

    The answer that I gave them was who should be tested. Because in documentation it is stated that mark Dell hard disks should be used.

    I know that some controllers Perc will give a warning each time if not dell disks are used, but they work without problems. Is this the case even when you use a box MD1200?

    Kind regards

    Indrek

    INDRP,

    You're right that only some drives are tested and supported in the bays of the MD. Here is a link that will take you to one of the manuals that list all drives supported for 1200 MD and MD1220.

    FTP.Dell.com/.../PowerVault-md1200_Reference%20Guide_en-US.pdf

    Please let me know if you have other questions I would be happy to help.

  • Today cell 9.7 Pro wifi iPad receipt. No SIM card installed. I guess I can go to the carrier and get the SIM on their part is there a reason I would need the Apple SIM card?

    I got my Pro iPad with wifi and cell phone. There was no SIM card. I'll go to the carrier and get the card SIM on their part is there a reason I need Apple SIM card?

    Apple SIM card to activate the iPad with more companies that I believe except Sprint - if you can get a SIM card from your service provider, then you would not fail the card SIM Apple

  • Reference Dell V515w compatibility with Mac Book Pro

    Is it possible to get the Dell software to make my V515w compatible with my Mac Book Pro? I want a WiFi instead of USB.

    SheelahMeyer,

    To be able to print, try the (Driver Mac) (another Mac driver Instructions and the drivers used) (Mac Os X 10.7 Lion driver) (Lexmark S300 - S400 Series)

    You will need to install the OCR of the disk of the printer program to digitize documents and pdf files

    Rick

  • Reference Dell Replay Manager with Actifio or well Veeam?

    I'm not very familiar with SAN storage. The company that I work is currently evaluating a backup solution that will use two Dell Compellents. Currently, we have a HDS, but are considering buying another for a warm site. The citation for the second HDS includes two Dell Replay Manager instances. My understanding is that Dell Replay Manager allows you to take snapshots, which is obviously a good idea. We also assess Actifio and Veeam as backup solutions. Replay of Dell Manager is quite expensive, and I wonder if it's necessary even if we will use Veeam or Actifio for a backup solution.

    Any who would provide no indication as to why or why we would not, want to eliminate the Dell Replay Manager of our purchase IF we proceed to a real (Veeam or Actifio) backup solution?

    Or, it would be better to abandon the Veeam/Actifio and use Dell Replay Manager?

    Thank you!

    You cannot Replay Manager if you go with the Actifio solution.

    Actifio captures the data of the production gradually environment forever and creates virtual copies for multiple use cases (data protection, disaster, recovery testing, etc.).  This architecture combines the quick capture of data from a snapshot of redundancy of a real consistent backup, application.

    Replay Manager uses instant Compellent to enter data, that work very well, but use of space on the storage array, and they do not provide a redundant copy of data.  Also, it presents itself as an additional cost and is another tool, that must be managed.  Actifio solution can provide snapshots, backup and replication through a single user interface services without storing to copy the data on the production storage matrix (copy data virtualization).

    Some of the main benefits of using Actifio in your scenario would be:

    -Copy the data would not be stored on the Compellent production table.  Snapshots of storage array can store the point at best time your production storage capacity.  Design of Actifio is to delete copies of your production sets and eliminate tools point of backup, replication, snapshots, etc.

    -Do you have a truly independent and redundant backup.  Storage array snapshots do not provide protection against the Group failures, breakdowns of the Bay or Bay of storage RAID software problems.

    -Data could be kept for more long with of Actifio built in compression and dedup global

    -Instant access to virtual copies of the data from the system of Actifio

  • (Redirected) Reference Dell chromebook 11 with Intel i3 chip

    Hello

    I need a new Chromebook low cost asap

    What will be the chromebook dell 11, with an Intel i3 chip, go on sale?

    How it will be in the United Kingdom?

    Why not buy the Acer (also cheap) 720 / 720 p instead?

    Hi redteddead,

    Follow this link for Dell Chromebook to the United Kingdom.

    http://www.Dell.com/UK/Business/p/Chromebook-11/PD?~SRD = true & sk = chromebook & scat = prod

  • Reference Dell 2700W UPS with the abandoned battery status

    I have several devices UPS 2700W Dell with a network management card. Some of them are now showing State of battery abandoned in the web INTERFACE, but the status is ok. When multiple verification of the State through the Dell UPS tools is shown as the same as that on the rest abandoned situation web. What is going on?

    Hello jwillemsen

    The State indicates that the battery of that test was abandoned. I suggest that initiate you a self-test and let finish. Let me know if that turns OK status.

    Thank you

  • Reference Dell 2950 Perc 6/i Raid card device driver

    Good morning community, I'm trying to find the Dell 2950 Perc 6/i Raid adapter Device Driver for Windows 2008 R2 Standard OS. Thanks in advance for your help. Modem489

    You don't need to load a driver for the PERC 6 / i in Server 2008 or newer version, the driver is 'native' for Windows.  If you think that you need a driver, I suspect it is because you tried to install and it is not all discs.  If Yes, do not forget that PERC does NOT support RAID/JBOD, then you must configure disks to a virtual disk (VD, matrix RAID) before they can be presented to the OS.  It can be configured in the CTRL-R utility (be sure to check the boxes of progress/Initialize options too).

  • Reference Dell 1390 vs intel 3945 mini-cards

    my inspiron 1520, when I always get waiting, dell 1390 network card, the other day, I bought a network card intel 3945 out of ebay for IT... I made the right choice, I think I did, but the need for expert advice?

    http://CGI.eBay.com/WS/eBayISAPI.dll?ViewItem&Rd=1&item=200217190592&ssPageName=STRK:MEWN:it & ih = 010


  • upggrading a windows xp pro service pack 3 with the new card mother and pure install using the original disk of xp with service pack 2

    I have an auto build Windows XP pro with service pack 3 that is upwards and I feel the need to upgrade to a new motherboard and processor causes memory and I know that when I do a clean install with my original disk, I lose service pack 3 that will then lose me the Microsoft support is anyway that I can backup service pack 3 for use with what will be considered a brand new computer

    See you soon

    The site is authentic.  You have two options when you do your relocation:

    Method 1

    1. Download SP3 form the Microsoft site and burn it to a cd or copy it to a flash drive.
    2. Reinstall Windows with your original Windows XP CD.
    3. Use the copy of SP3 that you burned on the CD or copied to the flash drive and update the machine to SP3.  Note that if you have an original CD of 'gold' of Windows XP without service pack that you install SP1a or SP2 before you install SP3, SP2 is available here , download and save it with SP3 before making your relocation.

    Method 2

    1. Download SP3 from the Microsoft site and it wake to your Windows XP CD.
    2. Install Windows XP with your slipstreamed CD and your installation will be in SP3, when installation is complete you will not need to install service packs, you'll just have to do some other updates that have been released after SP3.

    The http://lifehacker.com/386526/slipstream-service-pack-3-into-your-windows-xp-installation-cd is legitimate, it only gives you instructions on how to create and burn a CD of SP3 slipstreamed Windows XP.  If this seems too daunting then use method 1 to install Windows.

    Both methods are very good but method 2 allows a nicer cleaner installation, everything is installed to SP3 level and there are no remnants of previous service packs.  While creating the slipstreamed CD may appear to be a time consuming task, in the end, it will be a time saver and afterwards if you ever have problems with the installation of Windows you may need this cd SP3 slipstreamed to all repairs on the installation.  You can create the SP3 cd now and do it ready and at hand for future needs.

    John

  • Satellite Pro A40 system base with Belkin WLan card error

    Hi guys
    I am facing problem. After much effort, I have finally installed my belkin wireless card ;) but now I get error 12 for her. designates the conflict and one more thing
    I have 2 base system devices in my device as unknown devices Manager

    Please help me

    Hello

    Which Belkin WLAN card are you using? Is this PCMCIA card?

    On the unknown devices, it is not easy to say what he can be, but please check this document http://support.toshiba-tro.de/KB0/TSB57014E000QR01.htm

    I recommend you to install all the stuff from Toshiba on the Toshiba download page or use delivered please Tools & Utilities CD.

  • I took a sim card to an iPhone and place in another.  What should I do next to the phone with the sim card replaced?  The screen and apps are from the old phone...

    Hi, my wife 4S iPhone died and I I replaced his Sim Card with my old s 4 card as I have updated.  She is still decide to upgrade, but needs a phone so replace the sim card seemed like a good thing to do.  So now his phone has all my contacts, applications etc on it and none of his own.  What is the next step to have his stuff on his phone?  Is this to connect to its MacBook or reset the phone and connect.

    Thank you.

    Has a backup via iTunes or iCloud of his old phone before he died? If so, what follows has instructions. Transfer the contents of an iPhone, iPad or iPod touch to a new device - Apple Support

    Note that since the phone is already implemented (i.e., no news, the first step will be to follow the instructions below to the bottom of this link.

    To transfer a backup on a device, you have already configured, you need to clear the device: tap Settings > General > reset > erase all content and settings. This erases all the data that is currently on your device. After you erased, your device will restart and you will see the screen of 'Hello '. Now, you can transfer a backup of your device.

  • Reference Dell E6500 & DW5560 drivers for Windows 7 x 64

    Reference driver Dell Update Package supports DW5560 Mobile Broadband Mini Card
    Reference driver Dell Update Package supports DW5560 Mobile Broadband Mini Card
    Recommended 7.2.4.1 19/03/2013 Windows 7 32 bit
    Windows 7 64 bit
    Version of the driver DW5560 installation program
    Version of the driver DW5560 installation program
    Recommended 7.1.1.1 07/02/2013 Windows 7 32 bit
    Windows 7 64 bit
    Windows XP
    Windows XP x 64

    I tried to download this driver, does not after all, he said: "authentication failed. The Dell Wireless HSPA Mobile a mini card cannot be installed on this computer. Plaease contact Dell support for more information. »

    No solution for this problem :/

    Solution for this problem I have very easy, start the program installation driver, go to temp folder, coppy drivers manual from the temporary folder, the drivers manually

  • Dell Studio 1450 Sim Card slot does not

    I have a dell studio 1450. The sim card slot does not work after you insert an active GSM sim I can't access the net. Help, please. Thanks in advance.

    Currently, your laptop will have a wireless WLAN inside card that does not require that a GSM sim card.

    In order to make the use of the GSM sim card, you need to replace the internal WIFI card with an internal WWAN card...

    Here's how...

    http://support.Dell.com/support/eDOCS/systems/ins1110/en/SM/MiniCard.htm#wp1189718

    It will be important to make the right card for your machine. You need to know what is compatible from Dell. If you don't like the price of Dell, you can take a chance on eBay...

Maybe you are looking for