Reference Dell VSM supports 8 groups PS?

Similar Questions

• Reference Dell studio 1536 gacé graphic / help__i have a computer laptop dell studio and I want to add additional video from my laptop hybrid crossfire support card and I can't find a solution and a graphics card for my notbook

  Ideas:

  • I have a dell studio laptop and I want to add additional video from my laptop hybrid crossfire support card and I can't find a solution and a graphics card for my notbook

  There SR 780 chip and also I could not find any housing emty external or internal to a 3D support
  Help, please

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi waheedkhan

  Welcome to the Microsoft Answers Forum!

  To install additional video card for laptop is not possible as desktop, as the video card is integrated with the motherboard. However you can contact Dell technical support if they can provide an additional location for add video card. Here is the link to the support technology guide below: http://support.dell.com

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Reference Dell EqualLogic HIT/VSM - VMware license terms.

  Hello.

  I read the release notes of Virtual Storage Manager 4.0, vSphere, conditions of licence, they are required:

  License terms for vSphere
  VSM comes with licenses and the following features:

  VSM: VSphere license any

  VASA: vCenter 5.0 or later version, ESXi 4.0 or later, any vSphere license
  In addition, the storage array firmware allows use the following features that VSM is installed:

  vStorage API for integration (VAAI) table: business, Enterprise Plus on ESXi license
  4.1 or later.

  Issues related to the:

  1. I'll be able to run VSM with vSphere Essentials Plus? VAAI at least requires vSphere Enterprise License. What are the consequences if I deploy with vSphere Essentials Plus.

  2 VSM supports ESXi 5.5 U2?

  Thank you

  Paul

  VASA is a feature you don't need basic VSM features.  Which is what the release notes are trying to say.   VASA allows VMware request more information on storage volumes.   I.e. through VASA VCS calls can show that a volume is RAIDed storage, integrates snapshots or replicas.   Currently, the usefulness of the VASA is limited, even when it is available.   VASA is the first step to VMware to better understand a storage array capabilities. More features will be coming in future versions of ESXi.

  However, to make the VASA work any, the storage provider must provide software 'glue' for specific HW calls of a query of VCS.   VSM, is what has the code, known as a "provider of VASA.   A translator of sorts.

  Kind regards

• Reference Dell M1000e + aggregator MI/O port mapping

  Hi all

  I intend to install a new chassis Dell M1000e with Dell M/o aggregator. During the time of solution, I have a few questions about correspondences between the physical uplink with NDC blade ports ports. A Please check the config below and specify my queries?

  My hardware:

  • 1 x Dell M1000e
  • 2 x M i/o aggregator (A1 & A2)
  • 16 x M630 Blade (Qlogic 57840 S ANC four ports card)

  Reference DELL M/o aggregator:

  (reserved for Future use) module QSFP + 2 ports (Port No1:33 - 36 & No2:37 Port-40)

  I want to use these two modules for my blades 4-port Quad and the confusion I had, how to associate these 16 ports (8 ports of each module) to the server blade and the amount of bandwidth I will get by blade with redundancy.

  Module 4-port SFP + 10 GbE (Flexi-O of the Bay) (Port No.: 41-48)

  Module 4-port 2/4/8 Gb FC FlexIO (Flexi Bay 1) (Port No.: 49-56)

  FYI - I would like to install ESXi 6.0 on all blades

  Thank you!!

  Vinay

  Oriented server ports are configured automatically as part of the aggregation of links groups if the server is configured for the LACP Protocol. Static GAL is not supported.

  You will use the segregation network VLAN. A VLAN for network traffic and the other for the CF. Here are the commands to configure interfaces for different VLANS.

  Unidentified:

  Dell (conf) # tengigabit interface 0/16

  Dell(conf-if-te-0/16) # vlan unidentified 4

  Output Dell(conf-if-te-0/16) #.

  Tag:

  Dell (conf) # tengigabit interface 0/16

  The tag vlan Dell(conf-if-te-0/16) # 4

  Output Dell(conf-if-te-0/16) #.

  Traffic from servers will follow the path of the VLAN. For example, if an internal server, facing the port is set to VLAN 4, that traffic will be transmitted on the uplink port which has also set to VLAN 4.

  By default, all external ports are placed in a single whole LAG. However, you can change the configuration to support several shifts of uplink. Page 159 of guys configuration takes you step by step on setting up several shifts of uplink.

  The aggregator automatically configures to match the FCoE parameters used in the switches to which it connects through its uplink ports. FIP snooping is automatically configured on an aggregator. Automatically configured port channel (LAG 128) works CWF port mode. See page 86 for more information and examples of config.

  For redundancy, you could stack the units together. 241 page details the process of stacking.

  Page 54 of 102 of the Guide blade IO has one other diagram that details more internal server port mapping for each blade.

• Reference Dell vostro 1520 with windows xp prof... Not reading CD/DVD

  Reference Dell vostro 1520 with windows xp prof... Unable to read & play any cd/dvd.tried mr.fixit content but no solution at the moment.

  Hello

  1 have. what fixit you tried?
  2. don't you make changes to the computer before the show?

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  Important: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in the window.

• Reference Dell m2 / NVME specifications and requirements to upgrade for Optiplex, Latitude, XPS and Precision Mobile

  Good daycommunityof Dell.

  Because of your issues, I am pleased to present the information, specifications and requirements for m2 on various models of Dell below.

  Precision 7710:

  Internal dives supported: 3

  Lead taken configurations supported (max): 3 x m2 or m2 2 x and 1 x 2.5 in SATA.

  7710 PCIE lanes:

  2 m2 slots available are wired in 4 X

  The Bay of 2.5 inch is wired as 2 X

  Parts needed to install an m2 in the Bay of 2.5 inches of 7710 7510:

  1 x 745TM 2.5 inches metal support - most of the units will have this already included

  1 x Y1WJX Support of m2 (goes inside the 745TM)

  4 x 2864 D Screw M3x3. Most systems will have these already included. These screws hold support unit of Y1WJX m2, or a record of 2.5 inches in 745TM.

  1 x WPTND Infill of the m2. This installs in the support of Y1WJX m2.

  5 x 4270E M2.0 * screw 3 L

  1 x HR8P8 Cover thermal m2

  Find instructions here on the Dell Community.

  Precision 7510:
                                                                                                                  
  Internal dives supported: 2
                                                                        
  Drive the supported configurations: 1xM.2, 1x2.5 SATA, 2xM.2, 1xM.2 and 1x2.5 SATA

  PCIE lanes:

  M.2 housing supports 4 x

  The Bay of 2.5 inch is wired as 2 X

  Parts needed to install an m2 in the Bay of 2.5 inches are the same as the 7710 above.

  5510 precision and XPS 9550:

  Internal dives supported: 2

  Drive the supported configurations: 1 x m2, 1 x 2.5 SATA, 1xM.2 and 1 X 2.5 SATA

  PCIE lanes:

  M.2 housing supports 4 x

  The Bay of 2.5 inch is wired like SATA

  Parts needed to install a m2:

  1 x 88DJK thermal pad (no plate required)

  1 x 4270E  Screw M2X3

  Parts needed in order to add a 2.5-inch disk:

  1 x XDYGX cable

  insulator side 2 x 3XYT5 rubber

  HARD drive 1 x 3FDY3 metal support (some units may already have this even if a disk 2.5 inch was not originally ordered from Dell)

  Discussed here on the Dell Community.

  Precision 3510:

  Internal dives supported: 1

  Drive the supported configurations: 1 x 1 x 2.5-inch SATA or m2.

  PCIE lanes:

  M.2 housing supports 4 x

  2.5-inch Bay is wired like SATA

  Parts required for the upgrade of disk 2.5 inch drive m2:
  

  1 x X3YR8  Support for end of m2

  1 x 1X2MT thermal cover

  2 x 4270E  Screw M2X3

  Discussed here on SpiceWorks.

  Latitude E5270, E5470, E5570:

  Internal dives supported: 1

  Drive the supported configurations: 1 x 1 x 2.5-inch SATA or m2.

  PCIE lanes:

  E5270 supports 2 x
  

  E5570 with CPU: supports 4 X

  E5570 with processor U supports 2 X
  

  E5470 with CPU: supports 2 x
  

  E5470 with processor U supports 2 X
  

  2.5-inch Bay is wired like SATA

  Parts required for the upgrade of disk 2.5 inch drive m2 is the same as above 3510.
  

  Latitude E7270, E7470:

  Internal dives supported: 1

  Drive the supported configurations: 1 x m2

  PCIE lanes:

  M.2 housing supports 2 X

  Parts needed to upgrade to IS:

  1 x DJ69P thermal cover

  2 4270E x screw M2X3 (most systems will have at least one of them already included)

  Discussed here on SpiceWorks.

  13 9350 XPS:

  Internal dives supported: 1

  Drive the supported configurations: 1 x m2

  PCIE lanes:

  The available m2 slot supports up to 4 X

  Parts needed:

  1 x 4270E screw M2X3

  OptiPlex 5040, 7040 (Mini Tower):

  Internal dives supported: 2

  Drive configurations supported: 1xM.2, 2xM.2, 1xM.2 and 1x2.5, 2x2.5, 1x3.5

  PCIE lanes:

  The single on board the M.2 slot supports up to 4 X

  The m2 drive installed in 2.5-inch Bay: 2 x

  Necessary parts for the m2:

  Bay of m2 on motherboard:

  1 x thermal Pad J0N94 (installs on the motherboard in the drive of m2)
  1 x YYJF8 live M2X3.5
   
  2.5 inch Bay with m2:

  1 x Cable SATA 6J3FV
  1 x X9FV3 M.2/2.5 inch adapter Bay/caddy
  On the card mother m2 installation instructions found here.

  OS install notes:

  There is a storage updated driver to include PCIE support. (One that you have to install Windows see the drive during installation):

  Intel's most recent

  Dell package

  Driver Samsung

  See also: installing Windows 7 on a SKYLAKE system using MDT: http://www.dell.com/support/article/us/en/19/HOW11493/en

  Obtaining an ISO image:

  For some systems, you can get Dell operating system through Dell hosted image images

  Note: not all systems and service tags will have a picture available.

  Note: Although Dell hosted Images have USB3, they cannot understand the pilot of TSRI currently. (some may know this the pilot to F6). You will need to install the driver of TSRI manually during the installation process of Windows.

  Dell is currently working to add the driver to the TSRI Dell hosted images. No ETA on when this will happen right now.

  Discussed here on SpiceWorks.

  Other works in m2:

  Solid State Drives m2 in chipset Intel Skylake systems Imaging

  Only 1 Solid State Drive (SSD) seen on map stand

  SSD not detected at the start or restart on new precision 15 5000 (5510) or XPS 15 9550

  A PXE with M.2 Solid State Drives boot

  How to distinguish the differences between the m2 cards

  Greetings Ypyap,

  Thank you for your question.

  Yes, the Vostro 14 5468 does support M.2, according to my literature.

  You will need:

  1 x 3P44J m2 stand

  

  x 2 7CJG4 M2 * 2 live (I'm still confirming if cela good reference number)

  

• Reference DELL T420 - battery on PERC H710 adapter controller

  Hello

  I received a yellow warning

  Reference DELL T420 'Battery on PERC H710 adapter controller'

  What it means?

  What should I do?

  Order the new battery?

  It is a simple replacement mission?

  Is it essential?

  Update:

  test URL

  http://www.Dell.com/support/article/us/en/04/SLN130018

  Have nothing, everything seems fine now...

  Thank you

  It is normal so he can make a full discharge of the battery as part of his learning cycle every 90 days. Make sure that this isn't that. If this isn't the case, the reason, give it 24 hours. If it is fully charged, update the system (including RAID firmware, driver first) firmware. If not fully charged yet or it reproduces quickly, then replace the battery - power down to replace.

• Reference Dell Sonicwall SRA

  Hey guys, more of a statement than a question. If you have a Dell Sonicwall and users do "found no appropriate group" of course the same user does not exist as a local user and a domain user. This will cause problems. Took me a while to understand that >.<>

  Good thought.

  Thank you
  Ben D
  Reference Dell SonicWall
  #Iwork4dell

• Reference Dell place 8 just out of warranty and dead now?

  Hello

  Everyone has a glue on Earth how to contact Dell technical support? My Tablet has acted weird for a while, but now it is completely dead and the custom lights at all. Previously, I got past pressing buttong for 10-15 minutes sometimes and then after a while it just turns itself off again. So now it's offshore and dead.

  I searched web pages of Dell support for direct contacts, but not luck. And worse, that it turns out that the warranty has ended in 12/09/14

  What a *.

  Reference Dell of mobile devices (phones) & tablets
  1-800-308-3355 24 / 7

  http://www.Dell.com/support/contents/us/en/19/category/contact-information/technical-support?c=us&l=en&s=DHS&CS=19

• Reference Dell 6gbps SAS HBA and Powervault TL4000

  Hello.

  We have a server Poweredge R620 with Windows 2008 R2, two Dell 6gbps SAS HBA cards installed and Simpana software backup R2 9.0.

  We also have a TL4000 with two IBM drives, all firmwares are up to date.

  Each SAS HBA card is connected to each drive in the library via a single cable SAS.

  I can see the cards in the Server Device Manager.

  The library works, but when I monitors the status of the disk in the web interface of the ilbrary, the two ports and B seem to 'not ready, not connected. "

  I tried to use Simpana to detect the library. But it cannot detect anything after dozens of tests and scenarios.

  What I am doing wrong? I can provide all of the information you want.

  Thanks in advance.

  Problem has been resolved with the help of Bestami Bayramoglu of Dell Technical Support team.

  I took some pictures of the rear of the server and the library and sent them to Bestami.

  They analyzed and was told that the SAS cards were not inserted and locked properly.

  These cables are equipped with a locking mechanism and they do not work if they are not inserted and locked properly.

  Another question for readers; SAS cards inside my server r.620 part number is j53x3. Crack of metal of this card is not compatible with my server in a rack. The correct we reference number is 3ddjt.

  Bestami told me about this and we will order correct.

  Thank you for your support.

• Reference DELL demanding $80 for a share of $5.90

  Laptop Inspiron 5758 bought April 2015, had the power switch replaced under premium support Oct - 15, 2 days after the end of my premium (to July 19) support switch has not yet. Card replacement (of the power T2CVC button) costs between $5.90 and $15, but is out of stock on every site I can find. Reference DELL tell me or send my laptop to be fixed @ $169, either to buy the small Board that DELL has a monopoly on cost me $85 (Anurag Srivasava3 July 21, 12 h 50 HE)

  This is outrageous, this is a new laptop and I expect at least Council (oct-2015) replacement work would be covered or DELL would have at least the care that I have a computer DELL with a hardware fault rather enjoy my situation and make huge profits that they would send me a part at normal price.

  Check out this link.

  Dell Inspiron 17 (5755 / 5758) power of button with cable - T2CVC

  They can notify you when it's back in stock...

• Reference Dell MD3200i correct editing with IP system and the NIC for faster network speeds

  Hi all

  I worked on this project for a while now. I did a lot of research and have contacted Dell several times. I need help.

  I have 2 sets of identical to use for Hyper-V clusters servers. We bought a Dell MD3200i in November, we also bought a Dell 5424 switch and a Cisco SLM2048 switch. These servers have Real Tek 2 network cards for iSCSI Jumbo frames is 9 k

  The Dell MD3200i is two SAN controllers. Dell 5424 is the iSCSI optimized switch and Cisco is a 48 switch ports. iSCSI is on its own network that nothing else is connected to it. (There is an Iomega NAS and a promise Vtrak SAN Tech with all current domain of execution with iSCSI controller)

  Reference Dell MD3200i controller 0 Port 0 192.168.130.101 controller 1 Port 0 192.168.131.101

  Controller controller Port 1 0 192.168.130.102 1 1 192.168.131.102

  Controller controller Port 2 0 192.168.130.103 1 2 192.168.131.103

  Controller controller Port 3 0 192.168.130.103 1-3 192.168.131.104

  Cisco switch has 1 VLAN n ° 1 on it and the 130 subnet inside elements. There are 8 connections to the switch. 4 controller 0 and 1 of each of the servers. It has an IP of 192.168.132.4, but that switch IP does not make difference. Lighted Jumbo frames

  Dell switch has 2 of #1 for various things such as the domain controller, Vtrack, and SIN. Subnet 2 is 131 and has a total of 8 connectors inside. 4 in 1 controller and 1 from each of the servers. Lighted Jumbo frames. The switch IP address is 192.168.132.2

  Groups of servers. Each server node running Windows 2008 R2 SP1 and running hyper-v with virtual server clusters / storage folder on them. 2 Realtek NIC with Jumbo frames made 9 k ProdNode1 and ProdNode2 have 12 Core i7 CPU with 12 GB memory, EXNode1 and ExNode2 have 12 Core i7 CPU with 24 GB of memory.

  ProdNode1 iSCSI-1 192.168.130.110 ProdNode1 iSCSI-2 192.168.131.110

  ProdNode2 iSCSI-1 192.168.130.120 ProdNode2 iSCSI-2 192.168.131.120

  ExNode1 iSCSI-1 192.168.130.130 ExNode1 iSCSI-2 192.168.131.130

  ExNode2 iSCSI-1 192.168.130.140 ExNode2 iSCSI-2 192.168.131.140

  Portal discovery iSCSI on ProdNode1 went to 192.168.130.110 192.168.130.101 and 192.168.131.110 192.168.131.101 each of the other servers Discovery Portal have been pairs like this.

  iSCSI tab click on add 8 MPIO sessions at each of the ports on the MD3200i from Dell, target. For example, I added 1 session of 192.168.130.101 using it. Add Session,--> activate--> Advanced Mutlipath--> Local--> IP 192.168.130.110 initiator and target 192.168.131.101 iSCSI adapter. This is repeated on all servers. 4 connections for each NIC.

  The network is very slow. It revolved around 2 to 4 MB/MIN and it should be much faster. Initially, we had only the Cisco switch with only 1 VLAN and everything connected directly to it. I read somewhere that MPIO has been the problem, so I went through the same configuration but does not verify the MPIO checkbox above. Once this has been done, the network speed went up to 1.5 GB/Min but modular storage Dell was not happy, and virtual servers would fail and the connection is not very stable.

  What wrong with my setup? Can I directly home and fix the servers directly to the PowerVault and will make stable and allow for failover and redundancy NIC? I need to get this stable so I can move with something else.

  Thank you Ron

  You will need to change your system of intellectual property on this:

  rbramble

  EX-Node1 iSCSI-1 192.168.130.130

  EX-Node1 iSCSI-2 192.168.131.130

  EX-Node2 iSCSI-1 192.168.132.140

  EX-Node2 iSCSI-2 192.168.133.140

  Prod-Node1 iSCSI-1 192.168.130.10

  Prod-Node1 iSCSI-2 192.168.131.10

  Prod-Node2 iSCSI-1 192.168.132.20

  Prod-Node2 iSCSI-2 192.168.133.20

  Reference Dell MD3200i

  Controller 0 Port 0 - 192.168.130.101 Jumbo Frames 9K

  Controller 0 Port 1 - 192.168.131.101 Jumbo Frames 9K

  Controller 0 Port 2 - 192.168.132.101 Jumbo Frames 9K

  Controller 0 Port 3 - 192.168.133.101 Jumbo Frames 9K

  Controller 1 Port 0 - 192.168.130.102 Jumbo Frames 9K

  Controller Port 1 1 - 192.168.131.102 Jumbo Frames 9K

  Controller 1 Port 2 - 192.168.132.102 Jumbo Frames 9K

  Controller 1 Port 3 - 192.168.133.102 Jumbo Frames 9K

  Your iSCSI sessions will be:

  For EX-Node1:

  -192.168.130.130 to 192.168.130.101

  -192.168.130.130 to 192.168.130.102

  -192.168.131.130 to 192.168.131.101

  -192.168.131.130 to 192.168.131.102

  For EX-Node2:

  -192.168.132.140 to 192.168.132.101

  -192.168.132.140 to 192.168.132.102

  -192.168.133.140 to 192.168.133.101

  -192.168.133.140 to 192.168.133.102

  For Prod-Node1:

  -192.168.130.10 to 192.168.130.101

  -192.168.130.10 to 192.168.130.102

  -192.168.131.10 to 192.168.131.101

  -192.168.131.10 to 192.168.131.102

  For Prod-Node2:

  -192.168.132.20 to 192.168.132.101

  -192.168.132.20 to 192.168.132.102

  -192.168.133.20 to 192.168.133.101

  -192.168.133.20 to 192.168.133.102

• Reference Dell WinPE 5.0 driver CAB

  I have SCCM SP1 R2 and the Dell customer integration Pack 3.1 2012.  When I try to import the ACR 5 of WinPE from the SCCM console, it fails with 'the selected driver package is incompatible.

  Does anyone else have this problem?  My understanding is that SCCM R2 supports Win 8.1, which is what Win PE5 comes.

  Thanks in advance

  Tony

  Hi Tony,.

  Reference Dell Customer Integration Pack 3.1 is not support SCCM SP1 R2 2012. CAB WinPE cannot be imported via CPID 3.1 and it has to be injected for the boot image. Also try the last 5.0 WinPE that is available in the link below

  http://en.community.Dell.com/TechCenter/enterprise-client/w/wiki/5029.WinPE-5-0-driver-cab.aspx

  Thank you

  Pascale Raja

• Reference Dell - never!

  I bought two computers in July 2009. I had problems with both of them. Inspiron mini had a problem with wireless, Dell said was my fault. and refused to fix it until I told them. I wanted to return it them. Finally they gave me a free support and support person said that there is something wrong with the computer I received.  Something other than the computer is unbalanced and wobbles when he types. I sent the compture to get fixed and it never got fixed.  I thought I would just deal with it because you get what you pay for.

  In January my XPS studio crashed. Screen has become sell contact of Virgin material and the damage. So I called dell. It took them a month to figure out, and indeed there is something wrong witht the computer. Thus broke computer I couldn't use it for a month. Finally I got the new memory and hard new dirve. The next day, my computer crashed. He spent a month trying to say Dell that something was wrong with my computer. All that time I spent 30-75 minutes on the phone with technical support. It was time that I called 4 days a week. I bought long and costly warrenties on my computer, including hardware and software. Not to mention cell phone chargers. Finally I conviced someone as my computer is really broken and they agreed to send me another computer. I'll go at least a computer that works. Understandable that it would take some time to get my replacement. My replacement date came and went. I called Dell again 45 minutes on the phone.  Then I've been transferred several times. The rep that I talked to said that they have not yet started doing my replacement.  It has been frustrating and I think that he was treated in a disrespectful way, what happened to quality customer service.

  On top of that today I was warned that even if the company has already approved my payment of $ 1,500, they now can't seem to find a record of the transaction and consider my past due account.  Also, they refused to refund my money and couldn't give me any assurance that the situation would be resolved.

  Anyone has any advice on the purchase of an Apple, I hear they have great customer service and wonderful tech support.

  I just wanted you to know that you aren't the only one with all these problems.  I am struggling with for more than a month to replace my computer. Finally, on March 1, they said they would and they have placed an order.  Now a week later it stil is not delivered because they can't find a 'HARD' for my computer.  REFERENCE DELL SUCKS AND I WIL NEVER BUY ANOTHER.    I put a post of "do NOT GET ALL the ANSWERS.

• Reference Dell place 8 pro and 3g mobile hotspot

  Hey dell community.

  I have a place of reference dell 8 pro and I tried to get my Tablet for work with the mobile hotspot!

  When I plugged it it will say limited.

  None fixes please?

  Bobby Burgess

  Hi Bobby,.

  I found this thread on the venue Pro 8 and of connection to wireless networks / hot spots.  Try the suggestion in this thread and see if it helps.

  NOTE: I copied on the steps of resolution here as well in case anyone wants to see it.

  When sometimes, I had this problem, a deep discharge set: with power supply not connected, press the button of the Tablet for 30 or 60 seconds, including after the Tablet died;  Let the Tablet turned off for 2 minutes; and restart.  Have been informed by Support technique Dell that the cause is a buildup of static electricity, which avoids deep discharge.

  Todd