Reference Dell XT2: Lost the Zoom pinch when installed Windows 8 Pro
I have a Dell Latitude XT2 I bought with Windows 8 Preview. When I bought it, pinching at the zoom feature worked well. Because not all the drivers/features were intalled correctly however, I did a clean install of Windows 7 (x 64) and reloaded everything. I then bought Windows 8 Pro (x 64) and when I went to install, the installer asked me to remove the following as a mandatory step for installation:
-Dell touchpad driver
-Dell Data Protection Access (forcing in turn, deletion of Security Device Driver Pack & control Vault)
-Intel 16.5.2.0 network connections
-Duo N-Trig feel tactile multipoint package
After Windows 8 is installed, the pinch in the zoom function no longer works. I tried rolling back the drivers of the N-Trig, installation of the Suite of Vista x 64 and re-release to upgrade to Windows 8 pilots. However, I can't retrieve the pinch in the zoom function.
Either way, I am also unable to re - install the package access Data Protection and lost the fingerprint reader. However, no pinch recovery aid to the zoom would be greatly appreciated.
Thank you.
Hello
Thanks for the reply,
I was talking to software programs that have been uninstalled during the upgrade to Windows 8.
You can find these drivers under system utilities and you can also try updating the video drivers that is recommended and try to install in compatibility mode, in case of failure to help contact dell for the help these software are provided by the computer manufacturer, dell.
You can contact Dell technical support at the following link:
Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.
Tags: Windows
Similar Questions
-
Original title: windows 7 Home premium product...
I have a dell studio 1737 and was upgraded to windows 7 Home premium 32-bit. I was installing windows 10 when we lost the internet connection and now I get an error message on windows is not genuine. can someone help please!
Use your Windows 7 Home Premium product key to activate it.
Windows 7 is pre-installed on my computer, How can I find the product key?
The product key is located on the COA sticker attached to the bottom of your laptop or in the battery compartment. In rare cases it can be found also in the memory compartment. For systems of the Tower, look at the top or the side of the system unit. It looks like the following:
Click Start > settings > Update & security > Activation > change product key and then enter the new product key, and then click Next to activate
If you cannot activate Windows 10 after all the above and you are sure that you have the correct edition installed, then please try phone activation:
Activate your Windows 10 license with Microsoft Chat support
-
Downgrade the license key to install Windows XP Pro image
Hello
I bought 4 desktops additional whitebox from my provider. He said they can't get licenses of Windows 7 and I have them for us. We have a Windows SBS domain with about 60 workstations XP Pro. The new jobs all have the same Mo as some previous purchases and we 'pictures' for these machines on our network. I often have to change on a workstation with the other due to software or other issues, so for now, I don't want Windows 7 on a machine that I have to train someone on if I have to spend on their machine.
How I can or I can 'image' machines with XP Pro and use Windows 7 key to activate the operating system?
I don't want to go through the process of installing Windows 7 on all these machines and I then have to do the downgrade to XP on each. And if I have to 'image' of this box of I need now another "image" of Windows 7?
And finally, if I'm having to go through these hoops, do I need a XP Pro license key for the downgrade after inserting the XP Pro CD on the Windows 7 machine?
Thanks for your help.
Hello DoubleAce,
Microsoft offers rights to downgrade you can have a look through the following links:
http://OEM.Microsoft.com/script/contentPage.aspx?PageID=552836
Hope this helps Chris.H
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Reference Dell 926 printer will not print after installing Windows 7
After the upgrade to Windows 7 my 926 printer will not print. I followed the suggestions found here (unplug the printer on the wall, remove the brick, low load patch R166248 to delete the printer, the latest driver to load, R146832 dated 26/01/07, reboot). Restarts, driver going through complete installation process then I get an error at the end of the process, "the Dell Photo 926 Printer printer driver is not installed". I did this several times. In addition, I restarted the spooler to print several times. No luck. Additional suggestions on how I can get my 926 to work with Windows 7?
Greg,
I think that we all regret our first wedding, well most of us.
Removal of print jobs is a way of really nice to get rid of your documents. After you restart your computer, you should be able to run the fix, Manual printer removal driver and restart once more. Try it to install the Vista drivers in compatibility mode, I used Vista SP2.
Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Change Vista compatibility. Then, install the appropriate drivers. You will be asked when connect (printer)
To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.
Rick
-
increase in size of the C drive after installing windows 8 pro, why?
my C drive partition volume is 92 Go, he had a lot of space before moving on to windows 8 from windows 7, after installation, I've seen the size of my c drive has only 5.33 GB free, why has happened?
Thank you
I did it but the problem did not solve.my of free disk space is 2.24 GB, it's very weak. I have a question, I saw my C drive, I saw a folder named windows.old, what is? its volume is almost 18 GB. can I remove it?
Another problem I have are not wanter to add some more space to drive to another partition, I cut 50 GB of drive D and built a new primary partition but I can't merge the C drive, what should I do to add a disk space? (I used the computer management/disk management and also Acronis disk Director)Windows.Old stores your old Windows installation. You can use it to recover files or reinstall the previous version of Windows. If all your data has been migrated to Windows 8 safely, you can remove:
http://Windows.Microsoft.com/en-us/Windows-8/how-remove-Windows-old-folder
This should give you more space.
If you want to gain extra space, you need to use a third party tool like Easeus
Download Easeus at the following link
EASEUS Partition Master Home Edition - http://download.cnet.com/Easeus-Partition-Manager-Home-Edition/3000-2248_4-10863346.html
------------------------
Proceed with the installation of Easeus:
Click Next, follow the easy on-screen instructions.
Once the installation is finished, click on finish
Click go to the main screen
Select the drive you want to resize in partition window
Drag the button until you have an amount of disk space you need, then release desired.
Click on apply to apply the changes that you just made.
Click Yes
Click Yes
Your computer will restart several times and changes will be made to the layout of the partition, this process is hands-free, so no interaction is required.
-
0x8007045D error code when you install Windows 7 Pro 64-bit
I get an error 0x8007045D code when installing Windows 7 Pro 64 bit on the same same MSI 970 Gaming (AMD SB950 Chipset 970 +) motherboard, even OEM Win Pro SP1 7 X 64 dvd, the installation on an EVO of 840 Samsung 250 GB SSD.
16 GB of Ram (4 GB X 4 stix. Ran this OS on this forum for a year, trying to do (was) a clean install. I am puzzled, never had a problem like this.
I was the installation of the operating system, and you're right, when he was on the 2nd works. He remained at 0% for a while then I get this error message "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. 0x8007045D error code.
Someone at - he already had this?
Any help would be appreciated.
Thank you
Try to reduce the amount of RAM installed on a unique key and try again.
If you have several hard drives attached, disconnect all except the disk target hard.
If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.
-
All IT gurus out there who know Firefox... have lost the passwords saved when FF created a new profile and delete old files key3.dbf and logins.json profile. Any ideas, anyone?
So it's not a logins.json file?
I see a signons3.txt file and a file signons.sqlite older, if you can try to see if you can import passwords stored in this file.
You can force Firefox to re-import the passwords in the file signons.sqlite and regenerate the file logins.json with the following steps:
- reset the signon.importedFromSqlite pref on the topic: config page by default via the context menu
- Delete the logins.json file in the closed Firefox with Firefox profile folder
When you restart Firefox, then you should have the pref signon.importedFromSqlite with the value set to true.
You have passwords that are imported in the password manager, unless there were errors or signons.sqlite signons3.txt.You can open the topic: config page via the address bar.
You can accept the warning and click on "I'll be careful" to continue.You can use this button to go to the current Firefox profile folder:
- Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
- http://KB.mozillazine.org/Profile_folder_-_Firefox
-
I would like to disable the zoom pinch on my ES1-531... I zoomed to 300%... or reduced so small that you can read... everything is done using my touchpad... I tried to follow the explanations... I don't seem to find the settings to turn off... Thank you
Check the drivers on our page, you can try to uninstall the current driver have and try the one you don't have according to the model of your PC laptop Aspire E1-531
TouchPad
ELANTECH
Touchpad driver
13.6.3.1
7.0 MB
21/08/2015
Download
TouchPad
Synaptics
Touchpad driver
19.0.25.5
631,9 KB
21/04/2016
Download
-
Hotmail - I lost the sound alert when I get a new email? How do I turn it back on?
Homail - new sound alert message?Hotmail - I lost the sound alert when I get a new email?
Hello
1. how you access the emails?
2. are you using Internet explorer or you use any other e-mail client to access emails (ex: Outlook, windows live mail)?If you have any problem with the hotmail account, you can view the queries of the Windows Live forums:
http://www.windowslivehelp.com/product.aspx?ProductID=1You can reply back with information to help you better.
-
Satellite M30: random characters came on the screen even when installing
Hello
I have problems with my Satellite M30. It shows random characters or signs on the image. Other than this computer works well. I thought it could be virus, because I can see the Toshiba and the fine Centrino Logo, it starts happening during Windows loading.
So I reinstalled it but random characters came on the screen even when installing. If anyone can advise what this could be?
My thoughts are either bad graphics card or a Ribbon of a cable LCD screen mobo.
>... I can see the Toshiba and the fine Centrino Logo, it starts happening during Windows loading.
> Then I reinstalled it but random characters came on the screen even when installing. Can someone advise what this could be? My thoughts are either bad graphics card or a Ribbon of a cable LCD screen mobo.For me it also looks like a GPU malfunction... what you is to connect the external monitor to the laptop. If the same strange signs, characters will be visible on the second screen while the GPU is defective...
Well, it would be the worst case, because the whole motherboard must be replaced in case of malfunction of a GPU chip...
-
How can I disable the zoom to screen in windows 7 to my mouse pointer
Original title: how to adjust the zoom level
Zoom Windows
How can I disable the zoom to screen in windows 7 to my mouse pointer its driving me crazy. Whenever I move the mouse around the page as it zooms in and out.
Go to the Control Panel, click on single from the Access Center, then click on make the mouse easier to use, this review area, click on the settings of the mouse down link.
You can also click on start and type pad or change the settings of the mouse and a few options should appear.
-
I installed Windows 7 Pro to Vista Home Prem Edition. Back up my HARD drive with the included HP software. Now I can't get my info on the HARD drive. When I try to open the computer file backup says msvcr71.dll is missing. How to install and where?
Hi dezertdawg,
Welcome to the Microsoft Answers site!
Msvcr71.dll errors are caused by situations that lead to the removal or corruption of the msvcr71 DLL file. In some cases, the msvcr71.dll errors might indicate a
problem of registry, a virus or malware problem, or even a hardware failure.You can use the tool (SFC.exe) System File Checker to ensure that the system files are intact and replace the file. Follow these steps:
1. Click Start and type cmd in the box start the search.
2. right click on cmd in the list programs and then click Run as administrator.
If you are prompted for an administrator password or a confirmation, type your password or click on continue
3. at the command prompt, the following line, and then press ENTER:
sfc/scannow
http://support.Microsoft.com/kb/929833
Kind regards
Amal-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
I am trying to reinstall windows 7 after an accident, now it won't let me use the discs I bought, because windows install doesn't work or is not found?
Could be a defective DVD. Download the right file .iso Windows 7 version (listed below), use the file .iso image to create a new installation DVD, boot from the DVD and re - install Windows.
Windows 7. ISO files that includes Service Pack 1
(Note: must match for your product key version)Windows 7 Home Premium 32 Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
Windows 7 Home Premium 64-Bit: http://msft.digitalrivercontent.net/win/X17-58997.isoWindows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.isoWindows 7 Ultimate 32 Bit: http://msft.digitalrivercontent.net/win/X17-59463.iso
Windows 7 Ultimate 64-Bit: http://msft.digitalrivercontent.net/win/X17-59465.isoHow do I know if I have a version of 32 or 64 Bit of Windows installed on my computer:
http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bitAfter downloading the file correct .iso using ImgBurn or ISO gear to burn a bootable DVD.
Create a Windows 7 Bootable DVD using the. ISO file
Engraving of a file of Windows 7 ISO on a DVD
http://support.Microsoft.com/default.aspx/KB/977640ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
It supports a wide range of image file formats, and it's free.
(BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
http://www.ImgBurn.com/Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
(Les étapes sont les mêmes pour Windows 7 ou Windows 8), except that you do not create a repair disk but complete an installation DVD)Note: Always use high quality DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.
====================== Keyless Install ================================
How to make a 'Keyless Install"of Windows:
Boot from the Windows 7 DVD disc, you create and launch the installation.
After entering the username and password you will be asked to: "Enter your Windows product key", do not enter a key.
Also located right underneath the box where you must enter the key is a box with a check box 'Automatically activate Windows when I'm online', remove the checkbox and click "next".You now have a 30-day grace period to activate Windows.
During this 30-day grace period you can try to solve your problems.
After you are satisfied with all the problems have been resovled then activate Windows.====================== Device Drivers =================================
Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.
If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.
List of computer manufacturer support sites:
http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturersTips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problemsGraphics/video drivers:
Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us= How to activate Windows 7 by Internet =.
1) click Start and in the search for box type: activate
2) click on the 'Activate Windows' option at the top of the list
3) click on "now, activate Windows online.
(4) enter your 25-character product key (not case sensitive)
5) click "Next" and wait for the key must be verified.Another method - to reach a real person:
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone * do not select/press any option * and wait for a person to help you.
(6) explain your problem clearly to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.Microsoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)The phone number is not working:
Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspxActivation and registration of a Microsoft product
http://support.Microsoft.com/?kbid=326851
Windows activation: (888) 571-2048J W Stuart: http://www.pagestart.com
-
I just installed windows 7 pro. Unfortunately, by mistake I installed the 32-bit program on 64-bit program. now that I try to install the 64-bit, I get the error message: "this installation disc is not compatible with your version of windows. upgrade I need the disk to correct installation. so he said to shut down your computer and reboot the installation disc. »
but when I reboot it just goes directly to the office. would someone kindly give advice on how I overcame this misadventure? I know that windows 7 pro on my computer, 32-bit version, but want windows 7 pro 64-bit version. I still have the discs and software keys... Thank you.Prior to this installation, I was running 32 bit XP proYou'll need during cratch because there is no way to upgrade a 32 bit OS to a 64-bit version of Windows.
Check your BIOS to make sure that your DVD drive is set as the first boot device, and then save your settings (if a change was required) and get out.
With the 64-bit DVD in the DVD drive, restart the computer.
Choose the "Custom" option and then delete the existing system and Windows partitions, click next to continue the installation,
Since you enabled the OS using the 32-bit product key most likely you need to activate by phone this time.
How to activate Windows 7 or Vista manually (activate by phone)
http://support.Microsoft.com/kb/950929/en-us1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone * do not select/press any option * and wait for a person to help you.
(6) clearly explain your problem to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.J W Stuart: http://www.pagestart.com
-
I let the Setup program to remove the previous version when installing CC2015 AE and now also wish to have CC2014 installed.
Thanks in advance,
James Edmunds
When you open the Panel creative cloud, on the section "Find additional Apps", click on "All Apps" (right side) and select "Previous Versions".
Maybe you are looking for
-
Recently, my firefox spent in the Croatian language. It is poorly translated, and he mixes English and Croatian for some sentences. I had enough to have in English. How do I do that?
-
How can I change the main hard drive to slave
I added an additional Segate SSHD to my HP Pavillion H8 1110. It presents itself as the slave drive. I would like to change to the master drive.
-
If I delete a photo from an album is still "all photos"?
deleting Photos
-
What is the right email address for filter replacement.
Email for Windows SBC replace 8 Direct? I called Microsoft re a Windows XP restore disc. Was informed I could order it from Microsoft by e-mail and so bad, I had some trouble hearing background noise. Thought he said"Microsoft SBC replace 8 * address
-
Cannot copy anything to drive (CD r discs used that appear like OK on the front disc). Will play music CDs and show content when you use explores. Put on a regular basis (data) CD in the drive it just periodically click on and does not and will not a