Reference T420 RAM Dell - manufacturer: 0146 or P9RN2?

Similar Questions

• RAM Dell Inspiron 530 (initially 3 GB of RAM with Vista 32-bit), can be upgraded to more than 4 GB, Windows 7 64-bit?

  I have a Dell Inspiron 530 with 3 GB of RAM, bought 4 years ago, with Windows Vista 32-bit.

  Since then, I've updated for Windows 7 64 bit PC and want to upgrade the RAM to 4 or 6 GB.

  Site Web of Dell indicates that memory on the Inspiron 530 is limited to 4 GB.  Is this true with Windows 64-bit?

  I thought that with 64-bit Windows, you could spend as long as could be installed in the 4 memory locations, well more than 4 GB of RAM.

  Can someone clarify the situation?

  Panzano

  Yes, it's the same motherboard, just a revised reference number.

  Better to open the case and check the label on the motherboard.

  Here is a list of the different revisions of the same motherboard part numbers

  Dell reference: RY007 0RY007 CN-0RY007 G679R 0G679R CN-0G679R RN474 0RN474 CN-0RN474 K216C 0K216C CN-0K216C GN723 0GN723 CN-0GN723
  The manufacturer model number: G33M02

  Bev.
  

• Reference Wyse X90LE Dell / Windows XP.

  Hello support. We have recently installed Vmware Horizon View 5. That works fine now.

  Now step # 2

  We need to buy thin clients, I will need to know this " " " Wyse X90LE Dell ' model with Windows xp will work for us?

  Reference Dell Wyse X90LE 2 1 Thin Client Notebook computer laptop 1 GB RAM 2 GB Flash XPE NEW | eBay

  
  

  Kind regards

  
  

  Unfortunately view4.0 support only version max... you need to spend for another product

  

• Upgrading RAM Dell Dimension 4700

  Hi all

  OK I will try once again to this type. The first time I tried to type this my Surface frozen without reason and had to be properly closed. OK, I'll update the RAM on my Dell Dimension 4700 and I need help and advice before I do. My Dell says it has 0.99 GB of RAM installed. I looked inside and found that there are two sticks of 512 MB of RAM. I found (2 sticks of 1 GB) 2GB of RAM for Dell Dimension 4700 at amazon.com and intend to purchase that. So when I update the RAM I get two sticks of 512 MB and replaced with new 2 sticks of 1 GB from amazon? Are there precautions should I take? (In addition to wear an anti-static wristband) Thank you.

  Before you buy, go to http://www.crucial.com/usa/en/systemscanner

  Download and run the Crucial scanner.  This will tell you:

  • supports memory of how many are in your computer
  • How much memory is in each
  • the maximum memory that can be installed on your computer and how
  • the right kind of RAM in your computer

  Do not buy crucial, but pay attention to what the scanner says that you need.

  In short, if you have only two supports from memory, then Yes, you need to remove the memory that is in them to put in new RAM.  However, just because you can buy two memory modules of 1 GB does not necessarily that your motherboard will accept them.

  When replacing memory.

  See http://www.crucial.com/wcsstore/CrucialSAS/pdf/install-guides/ram/crucial-dram-install-guide-en.pdf

  • take precautions against static - touch the chassis first; do not touch the contacts of the RAM modules
  • Unlock the pliers and pull it up
  • Orient the new module properly - there is usually only one way correct to put in - and push straight down firmly, but without wavering until closing locks.

• RAM Dell XPS one 2710 question does not start with more than 2GB of ram

  Hi, I recently updated to Win10 I've taught it will be easier way for installation after upgrade fees, but the reset button does not work so I decided to return to 8.1. I copied version UEFI victory to USB and restarted the victory while pressing F2, but the computer does not restart "just black screen even no Dell logo" so I turned it off, back on and same story. Then I disassembled the pc and know that no matter what combination I do the computer not start until there are just 2 GB or less ram in slot I have 1 x 4 GB 3x2GB and 2x1GB any variation as possible, you can imagine I tried close up with the same result. If there is more than 2 GB of system ram won't start. No idea where is the problem? for 2 years this computer worked perfectly.

  PS: Does anyone know how to reflash the BIOS I have spin A12 which is the most recent, but I want to just make sure that the BIOS is not messed up. DELL utility allows not only update reflash. Does anyone know how to force the upgrade of BIOS?

  So I found the problem, it's a BIOS. I tried to reset it in PIN on MB and it did not help removed battery no change I found that the BIOS utility can be forced thru cmd. So I did and the finishing of the bios update successful she even seems scary cos for any computer freezes. but that came on and after several early I can again use all the RAM slot with what ram size I want.

  How to force the update of the BIOS...
  Open cmd as administrator
  and run the exe with command extra /forceit in my case "A12.exe /forceit".
  Voila BIOSupdate is running

  Simple but time fly. hope it helps someone too.

• Upgrade of ram dell inspiron 5459

  Hello

  I bought Dell Inspiron 5459 and want to update his Kingston HyperX Impact Black 8GB DDR3L memory 1600 MHz RAM (HX316LS9IB/8). I'll add two ram (16GB total). The ram is compatible with my laptop?

  Thank you

  The Inspiron 5459 comes with DDR3L 1600 mhz ram and takes in charge 8 gb SODIMM, that I have not tested the memory of Kingston on a 5449 myself, but in theory, it seems that the memory should work fine.

• Upgrade ram Dell Inspiron 7559

  Hi all, I recently received a Dell Inspiron 7559. It came with a 8 GB Skhynix "hmt41gs6bfr8a-pb No 1506 aa" stick of RAM. I want to upgrade to 16 GB. I thought that I had bought the same model of 8 GB of RAM on ebay, but I have a 8 GB Skhynix "hmt41gs6bfr8a-pb na aa 1511. They are two completely different models because of their different nomenclature? Can I still use it to upgrade my ram? Thank you

  I get similar Inspiron 15 7559, and yes the RAM should work as long, it's a real play "DDR3L 1600 (PC3L 12800)" memories. "

  If you're unsure, this specific memory of WindowCentral video I found on Youtube on the extra addition of 8 GB of RAM.

  www.newegg.com/.../Product.aspx; nm_mc=AFC-C8Junction&cm_mmc=AFC-C8Junction-mobile%20Nations%20/%20Smartphone%20Experts-_-na-_-na-_-na&cm_sp=&aid=10446076&PID=7293383&SID=d_wp >

  Compare to

  www.eBay.com/.../i.html; _trksid=p2050601.m570.l1313.TR0.TRC0.H0.XCrucial+8GB+204-pin+DDR3+so-DIMM+DDR3L+1600+%28PC3L+12800%29.TRS0&_nkw=crucial+8GB+204-pin+DDR3+so-DIMM+DDR3L+1600+%28PC3L+12800%29&_sacat=0 >

  Well, good luck upgrading you laptop and take advantage of the potential of 16 GB of RAM! Note the limit for this model is 32 GB if I remember correctly.

• Upgrade of RAM Dell Inspiron i5 3647

  Currently I have a 4 GB of RAM in my Inspiron 3647 Desk Top with an i5 processor...

  You want to upgrade with another 4 GB of RAM.

  What is the specification for the RAM and then I buy from Dell?

  Thank you

  emjay35

  Thanks for the reply with explanation.

• Question ram Dell Vostro 3449

  Hello

  I'm considering buying laptop Dell Vostro 3449, I have a question about ram.

  I want to increase the ram 8 GB, but the manual says it can support up to 4 GB only.

  Can anyone confirm whether or not the ram is expandable? All the world does?

  I know the chipset that has this laptop?

  Thanks in advance.

  Hello

  Thanks for writing on the Dell Community Forum.

  Dell Vostro 3449 takes in charge only DDR3 low voltage (DDR3L1600MHz 1.35v). It is not compatible with the DDR3 memory. This system only has a memory location and supports a maximum memory of 8 GB.

  The chipset on this system is Intel 9 Series Chipset PCH (PCH - LP 9 Series).

• T420 RAM upgrade

  Hi all

  Today, I have several T-420 and I need to spend 4 of them, so I need new batteries (np) and 4 GB of RAM.

  The original 4 GB of RAM is a Ramaxel 4 gb 2rx8 PC3 - 10600S - 999

  But the LENOVO Web site is only to offer me to buy a 4 GB SODIMM DDR3 - 1600 PC3 - 12800 goto 1333

  Is this ok?

  My question to customer support () is always unanswered...

  KMM59994019V27514L0KM

  Hello and welcome, Tarasque

  It's the simplest issue with hundreds of responses on the forum. That's why forummers are silent.

  Buy almost any what memory stick (!) you'll find - SODIMM DDR3-1333 PC3-10600, CL11, 1.5 volt, up to 16 GB (2 x 8), with the exception of the model 'brand' noname, even to the aftermarket. PC3-12800 DDR3-1600 memory will work if it supports 1333 Mhz, so he needs to read the stick. Don't buy low-voltage 1.35v, memory if she can't handle too many 1.5V.

• Reference 5.1 Dell 5650 surround speakers very quiet

  Hi all.

  Im a total noob at all it is so gental lol.

  Ive had a dell 9150 and dell 5650 5.1 surround sound.  Ive connected everything according to the manual, but I have to hold a speaker until the ear just to hear the music.  Ive checked in Device Manager and I have a Sigmatel high definition audio codec version 5.10.0.4823 driver installed.  In the control panel all volume levels are highest and the Soundbar on the bottom of the screen is also completely clock wise.  All speaker connections are in and the 3 x 3.5 mm plugs are in the right order.  Integrated sound card is also value on in the BIOS.  I don't know that catches and sound card are works well as another set of speakers works.  I could be missing something that is an easy fix.  Any help will be much appreciated.

  This is my system:

  Dell dimension 9150

  Microsoft xp professional version 2002 SP3 with intel pentium 4 ht.

  Thanks in advance

  Neil

  Hi Neil,

  Dell Dimension 9150 supports a surround sound 7.1 via its embedded audio codec. He must connect the green plug to the green port, black pine in the black port and yellow pine from the speaker to the yellow port.

  

  You will need to select 5.1 speakers in the Creative Media Audio Software and check the synchronization with the control panel option. The volume of each speaker in the Surround Mixer.

  Please reply to this message if you need help.

• Reference windows xp Dell does not wake from sleep mode

  I am running XP service pack 3. When I try to wake up computer sleep mode orange light flashes but will not start. I hard reboot - sometimes the work - sometimes not. Sometimes he began alone. It is an intermittent problem.

  Hello

  Try the procedure described in the following article and check the status of the issue.

  Solve problems to wake the computer from sleep mode.

  http://support.Microsoft.com/kb/266283

• Checklist to upgrade RAM and rules of thumb for HP Probook 4540 s

  Hi people,

  I had a 4540 s HP Probook with 4 GB of RAM (DDR3 1600 MHz PC3-12800). I need to know the checklist for upgrading the RAM. In alternative to the RAM slot, insert a map of 8 GB RAM to make a total of 12 GB? CPUz tells me that my current RAM card manufacturer is Hyundai Electronics. I have to choose the new RAM card from the same provider? What else should I look to the new RAM card to best it would work flawlessly with the RAM that is already installed? What else is there to watch?

  Kind regards

  Adil Khalil

  Mix capabilities and the manufacturers of modules memory unfortunately is generally a step in the path to a memory upgrade failed or problematic.

  If you want to have 8 GB physical memory, either delete the original module installed and use two guaranteed compatible 4 GB memory modules identical or a simple 8 GB guaranteed compatible memory module. Whatever it is. disassembly of the original module will be necessary. For best results use wel lknown memory brands like Kingston, Crucial, Corsair etc. Generic brands are generally not guaranteed compatible.

  Beyond 8 GB is not supported in the motherboard of your laptop.

  Source reference HP proBook 4540 s Maintenance & Service Guide. Your best bet is to buy guarteen 4 compatible

  

• Dell v715w printer says printhead not supported by AI0

  Dell v715w printer says printhead not supported by ao1

  clean the print head, returns the printhead not supported by all-in-one, what should I do?  pls help me...

  Hi Thomas,

  Please refer to this link for reference: http://www.dell.com/support/article/us/en/04/SLN297761. If you need more about the product, you may need to contact your manufacturer.

  Thank you

• Qosmio F60-100 - after that upgrade RAM screen goes black

  Hello world
  I upgrade my RAM a g-skill 2 * 4 GB 1066 Mhz DDR3
  I have a Qosmio F60-100
  I am on Windows 7 pro N
  I checked whether they have updated bios (the toshiba soft explain to me, that there is not an update available)
  I checked if the RAM were compatible with my laptop (these have been suggested to me)

  When I put the new RAM in the laptop, in "Starting Windows", the screen goes black and the fan works hard.
  So I'm not able to install my new RAM.

  These ram are compatible with my laptop?
  What is the problem?

  Thanks so much for all those who can help you.

  PS: English is not my mother tongue, sorry about that...

  Hello

  According to your Qosmio notebook specifications can be improved up to 8 GB. The comparable memory modules are:
  2 GB DDR3-1066-PA3676U-1M2G
  4 GB DDR3-1066-PA3677U-1M4G

  I don't know that references your RAM modules but the behavior described is probably as a result of the use of non compatible modules.