Reference 5.1 Dell 5650 surround speakers very quiet

Similar Questions

• Using old Dell on a new '' surround speakers

  I just bought a new Dell XPS 8500 and planned to use my old Dell surround speakers I bought with my older Dell XPS in 2005.  As one might suspect him, the color coding is not to help me.  I need advice on how to plug them in.  My old speakers have three strings, color GRAY, BLACK & YELLOW.  My new XPS has six input jacks audio in the back in two rows of three.  The colors on the catches are GRAY, BLACK, ORANGE and RED, GREEN, BLUE.  What should I do?

  Thank you

  Lloyd

  Since no one answered my questiom, I tried to connect my old ADA995 Dell speakers (Altec Lansing) for my Dell XPS 630i system. Everything seems to work. Here are the links I used:

  The ADA995 has 3 entrances.

  1. Center & subwoofer (yellow)

  2. before left & right channel (green)

  3 channel left & right rear (black)

  The XPS360i has these outputs.

  1 surround his (black) connector

  2, taken headphone/line-out (green)

  3 side surround connector (Silver)

  4. Center connector subwoofer/LFE (orange)

  The connections I used were Yelllow > Orange, black > green and green > Silver.

  As far as I know, six audio ports on the XPS 8500 have the same color code.

  Chip

• My Dell V305 printer prints very small. How can I get to fill the page?

  My Dell V305 printer prints very small.  How can I get to fill the page?

  Hello

  Were there any changes made on the computer before the show?

  Method 1:

  I suggest you to refer to the article and see if it helps:

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  Method 2:

  See the articles and check if that helps:

  To set printing preferences

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_setting_document_defaults_personal.mspx?mfr=true

  To set the properties of the printer

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_setting_printer_props.mspx?mfr=true

  Settings that affect printing

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_c_properties.mspx?mfr=true

• How is it, 5.1 surround speakers do not work with my computer?

  I decided to buy 5.1 surround speakers and I bought Logetich Z506. The problem was that I had no experience of surround sound. The front satellites and the subwoofer has worked. The Center and the pair of two rear speakers did not work. Well I am running Windows Vista Home Premium 32-Bit and my desktop is an Acer T180-ED390A(2007 model). The sound card driver that I use is Manager DD audio, Realtek and I noticed that I have 6 audio audio outputs on the back of the desktop computer. The audio outputs 6 are orange (central/subwoofer speaker), black (rear speaker), gray (speaker side), blue (line), green (front speakers out), pink (mic in). It seems that it supports 5.1, but it does not work. Can you please explain why it does not work?

  Hi JJJanu,

  You can try to update the latest version of the drivers for the Realtek sound card and try to set up the speakers again. Make sure that you get all the speakers sound or not.

  Realtek downloads

  Get high definition sound and music from your computer

  Sound cards: frequently asked questions

  Update drivers: recommended links

  Hope this information is useful.

• His lost in my 5.1 surround speakers Realtek High definition.

  original title: required to do a system restore and lost my 5.1 surround speakers Realtek High definition.  Can I recover, which has never happened before?

  I HAVE AN ACER LAP TOP WITH WINDPWS 7 'HOME PREMIUM' ASPIRE5542G AND I LOST THE ABILITY I HAD TO HEAR MY DVD, CD

  AND MOVIES IN HIGH DEFINITION, REALTEK 5.1 SURROUND SOUND.  ANY SUGGESTIONS?  Thank you.

  Hi 54NEWBIE,
   
  Can you listen to the audio on the computer since you're referring to get 5.1 surround sound effects?
   
  When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
   
   
  See the link below and check:
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
   
  You can also try to download and update the audio drivers from the following Acer site:
  http://support.Acer.com/product/default.aspx?modelId=1336
  1. click on the above link.
  2 download the Audio driver and install it.
   
  See also:
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
   
  Hope this information helps.

• W100: speakers too quiet - loud fan

  Hello

  I use the w100 - 10 d and I am not amused on the volume on the fan and
  the speakers. The fan is too loud and the speakers are very quiet.

  Is someone here who can give me some information on stakeholders and their configuration?
  In Windows 7 and Toshiba Conf. Panel sound level is on maximum level, but the sound is too quiet.
  Toshiba is perhaps to estimate that all users use headphones?

  Thank you

  > Is there, anyone can give me some information on stakeholders and their configuration?
  > In Windows 7 and Toshiba Conf. Panel sound level is on maximum level, but the sound is too quiet.

  This booklet is a kind of Tablet PC, a small display 7 I know what speaker volume you expect, but you will not get the same volume as on 15 laptop equipped with larger speakers.
  Furthermore, the speakers are not stereo and mono.

  By the way; the sound can be configured in the control panel-> sound
  Check if all volume controls are set at the beginning.

• Why is sound very quiet on my Satellite A100-447

  Hello.

  The sound has always been very quiet on my laptop - the speakers a little noise, and with headphones it is barely audible.

  All the usual signs of control volume are 100% and its facilitating registration on balance volume, but built-in speakers might as well not be there. Please could you suggest what goes wrong?

  I've had the computer for 6 months and it has always been like that. Thank you very much.

  I can't give you a professional advice on sound intensity because I can't hear it. Who knows maybe the laptop provides a volume normal, but you mean that he s too quiet.

  Generally all the volume controls must be defined on the level higher then you should get the best volume.

  If you think that there is something wrong with the speakers, ask ASP for a control of the laptop!

  Good luck

• Satellite A75 sound very quiet?

  I have the A75 and it works like a dream. I'm happy with it.

  One thing: the sound output is very low, very quiet. Even my MP3 player running on batteries kicking at its best.
  It's just so quiet.
  Everyone had the same problem.

  I visited the installation of Panel and hardware control and turned all the dials I know. (I'm a computer support guy, am so used to torubleshooting)

  Any comments?

  Hello

  Maybe the stupid recommendation from me, but check please button for the volume control on the right side.

• 4 k iMac is very quiet beeps

  I don't have my beautiful iMac for a few days and Ive noticed the small and very quiet beeps randomly. I can't be sure they came though it looks similar to its interior. These are not the normal error beeps that are strong and obvious, but much more quiet and light, but enough to notice.

  I've done several times entered AHT back fine and check my drive and who has spend no error. I checked all sensors using an app sensor signals good times without danger on all so not at all sure that it might be. I do not want to fail on me so soon to own.

  I cannot be sure if it's just a normal quiet beep and I'm just picking up...

  Any help would be good.

  Thank you

  Also don't have mail not open or have outlook if it is not an application

• Microsoft Lifechat LX - 3000 Volume is very quiet

  Good evening everyone,

  I am running windows 7 ultimate 64-bit edition.

  I recently bought this headset, its works very well, but even with the default volume very quiet sound max value.

  I tried uninstalling and reinstalling with own drivers, also I ran the Audio playback software to diagnose problems with no luck.

  The material looks very good, just the volume itself is very quiet.

  Hello

  Step 1: Check if the article helps you.
  http://support.Microsoft.com/kb/921334

  Step 2: Try to adjust the microphone volume

  a. Click Start, type mmsys.cpl in the search box and press ENTER
  b. in the recording tab, click on Microphoneand then clickProperties.
  (c) in the custom tab, click to clear the Microphone - 20dB
  d. in the levels tab, adjust the slider for the volume to the desired level and then clickOK.
  e. click OK to confirm the sound settings.
   
  Check the Linkhttp://support.microsoft.com/kb/969275

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• BlackBerry Z10 Help! Micro very quiet during calls!

  more recently, it has started, but as the person primarily texts that might have started a while back.

  Basically when you call someone, with the ear phone you, the person on the other line can hardly or not even hear you. [How ever when you put on speaker and speak directly into the microphone is always very quiet but audible.]

  I removed the battery and restarted, and it didn't work, so I'll try a wipe secrurity.

  If there is dirt in the mic, and if so how can that be cleaned?

  Thank you

  Do you have no OS update recently? What is the current operating system you have?

  In case of problems although I suggest to Bell store, have them take a closer look, or they can ship the Z10 for BlackBerry have them replaced!

• A voice very quiet level multi track.

  Hey,.

  I edit an audio file for clients that sounds balanced hearing normally or through the Waveform Editor , but one of the track becomes very quiet when I put it in the multitrack editor.

  The file seems to be divided into a high and a low level with the lowest level being very quiet and the top is just right.

  

  I have worked with hearing for awhile not but that has really confused me. Is could someone please help me solve this problem?

  Best regards

  Mdbroderick

  Hmm... looks like a pair of stereo tracks in a single file for me. In this case, open it in view Waveform, deselect a pair (Edit > Enable channels or controls to the RHS of the screen) and select Edit > copy again. This will create a new file of just the selected tracks. Since there are two of them, this will be a stereo file. Save it and use it as the copy to insert into a multitrack session stereo. Swap channels active on the original file and do the same thing with the other two and you're good to go - you will have the original split into a pair of stereo files, that you can manipulate individually to get the levels as you want.

  A major advantage of this is that you get to keep the original intact, and we will work on the copies, which is always safer.

• Reference Dell 5650 5.1 Center Sound bar on but not its Center

  Hello folks,

  Thanks in advance for any help with my challenge. I've been everywhere on the web to research and chose to finally ask the experts here. I'll try to be concise.

  I have a Dimension 8400 built end of 2004. Original sound card installed by Dell was Audigy 2 ZS. in the original configuration, all the sound elements including 5650 speakers worked fine... including the central bar. A couple of years, I had the Audigy 2 ZS replaced because he has started to break out badly.  My lady IT's replaced with the entry level Audigy card and claimed that I would not be able to tell the difference. Since then, I had problems with the speakers work correctly... so I resorted to earphones for the past 2 years. Now, I would like to know if there is a solution for my challenges before moving on to another sound card - and or new speakers.

  Here is what I tried so farhati checked all connections * uninstalled and reinstalled the Audigy software * enabled CMSS surround in EAX settings (this brought back the 4 main speakers to audible). BUT... Still no sound to the speakers of the Center bar. Center speaker sounds not even during speaker control through Creative Software diagnostics.

  The sound bar power light is on... Volume control works... Power SWITCH works... NO SOUND! Any ideas?

  Thank you very much!

  Found the part number, P7664. Dear CD.

• Have a spkr 5.1 surround speakers back system. No volume upwards or downwards. FRT Ctr & void work very well.

  I have all the cords(3ea.) connected to the back of my Tower. I would like to hear during the game.

  Hello
  
  1. have you configured your speakers 5.1 in windows setting?
   
  Method 1.
  Configure your speaker settings 5.1 as explained in the article below.
  Get high definition sound and music from your computer
  http://Windows.Microsoft.com/en-us/Windows-Vista/get-high-definition-sound-and-music-from-your-computer
   
  Method 2.
  You need to install the sound card drivers from the Web site of the manufacturer of the sound card for Windows Vista. Contact the sound card manufacturer for compatible Windows Vista drivers.
  For more information, see the articles below.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Reference Dell V715W is printing very slow

  I recently installed the Dell V715W printer it installed ok and print ok, unless you want to print anything that has all the graphics on it... He takes seriously until 5 minutes to print one or two pages.  If you want to print just a word with text document, it prints quickly.  Any ideas on why printing is so slow?  I am running Windows 7 64 bit

  A few thoughts more...
  -would be good if you could test it with another wireless router in exclude
  -with certain printers, there is an option to basically 'print as image' (makes a huge difference when we had a similar problem with PDF - totally different Scenario however).