reformat via Mount target?

Similar Questions

• Mount VESA LT1952P $

  Hello everyone,

  I hope I can find support in this community.

  I recently bought a $ LT1952P and I intend to stand on one foot of Ergotron Neofelx via Mount VESA, but I'm not able to detach the support provided.

  It seems to be fixed by three screws that seems impossible to reach.

  Is there a way to remove it?

  Thanks in advance.

  Just did. Everything went smoothly. Thank you very much.

• CAR-to-car cloning of EBS on the same host

  I'm running a car-to-car cloning of EBS on the same host... trying to run the below command, I get the errors below

  Perl adclone.pl component java=/db/app/oracle/product/11.2.0/db_2/jdk/jre = dbTier mode = stage=/db/app/oracle/product/11.2.0/db_2/appsutil/clone/ = dbctxtg=/db/app/oracle/product/11.2.0/db_2/appsutil/dev21_ifmisdbdev01.xml rmanstage = CUSTOM method / fra/STAGE/data/internship/rmantgtloc = + srcdbname FRA = dev2 pwd = apps showProgressode

  Logfile located at /db/app/oracle/product/11.2.0/db_2/appsutil/log/dev21_ifmisdbdev01/ApplyDBTier_09121455.log

  / 50% complete type system database Source key ("single" or "car").

  The system is identified as active CARS!

  Restoring the head node of RAC database on the new system via RMAN target...

  THIS PROCESS TAKES A LONG TIME TO COMPLETE AND DEPENDS ON THE SIZE OF THE SOURCE SYSTEM DB

  Enter the first phase to RMAN restore

  -50% finished

  Not able to run the first phase to RMAN restore!

  ERROR when executing apply...

  -bash-4: $1 tail-f /db/app/oracle/product/11.2.0/db_2/appsutil/out/dev21_ifmisdbdev01/restore-rac1.log

  ORA-19504: could not create the file "+ FRA/dev2/controlfile_dev2.ctl".

  ORA-17502: ksfdcre:3 cannot create the +FRA/dev2/controlfile_dev2.ctl file

  ORA-15001: diskgroup "FRA" does not exist or is not mounted

  ORA-15055: unable to connect to the ASM instance

  ORA-15055: unable to connect to the ASM instance

  ORA-27300: OS dependent operating system: open failed with status: 13

  ORA-27301: OS Error Message: permission denied

  ORA-27302: an error occurred at: sskgmsmr_7

  Complete recovery manager.

  operating system permissions

• Setting IP error incompatible. SMU-8135

  Hello NOR Forum,

  I recently got a new laptop. I want it to work with the NI SMU-1078 chassis with controller Embeded PXIe-8135. I'm having a problem to connect to it. There is an error in Measurement & Automation Explorer > remote systems > NOR-PXIe8135-# > status "Incompatible IP Settings."

  I tried this http://digital.ni.com/public.nsf/allkb/A0F6EFF8A33578948625749C006DEC3B , but it wouldn't let me change my static IP address. Help, please.

  Hey waterox,

  1 take a look at this article, because it seems to apply to your current situation-

  Why can I not connect to my PXI real-time (RT) target on the network

  http://digital.NI.com/public.nsf/allkb/24D16468DE8838B2862568E200746D7E

  2. reformatting of the target can be a quick way to solve this problem.  You should be able to configure the IP address of the target once reformatted.

  3. make sure that your network card settings are correct on your host computer.  The following document describes the process with a CompactRIO which should act the same as your real-time target.

  Configure the CompactRIO with a static IP address

  https://www.NI.com/getting-started/set-up-Hardware/CompactRIO/static-IP

  4. how many NIC's a laptop?  You have active Wifi?  If Yes, take a look at this-

  Best practices for using multiple Interfaces (NICs) with products OR

  http://www.NI.com/white-paper/12558/en/

  I hope this helps!

• Computer HP LAPTOP PAVI5-N258TX: used to stop Windows

  Im having a laptop for computer HP LAPTOP PAVI5-N258TX. I recently formatted, but now his habit shutdown. I installed all the drivers. But the Manager of computer displays that some drivers are missing. How can I identify missing drivers?

  Hi @Sanjaya22,

  Welcome to the HP Forums!

  It's a great place to find answers and suggestions!
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I see that you have recently reformatted the hard drive of your laptop and since then it does not turn off.  You say that you have installed all the drivers but device displays Manager some drivers are missing.

  You did all your Windows updates?

  If you reformatted via HP recovery, ran HP Support Assistant to facilitate updates of HP?

  If you have reformatted and used a disc at retail have you checked manually updates from HP.  You can choose the verification option now and it will scan your system and generate a list of software and drivers for you.

  Pavilion 15-n258tx software and drivers

  Then I'll make a HP computers - refresh your PC to solve problems (Windows 8).

  This will reinstall the operating system and should not affect your personal data.  I do not recommend that you make a backup of your data just to be safe.

  To say thank you for answering, please click on the thumbs up icon below.

  If this corrects the difficulty pleae tell people in choosing the solution provided.

  Good luck!

• Google Earth download causing starting problem

  Hi, I have Toshiba Tecra S3 Windows XP. After that I downloaded Google Earth, he gave a msg of error blue screen on a problem and the need to stop to avoid damaging Windows. It starts now only insofar as the functions of wallpaper and mouse, not icons. Can reformat via HDD recovery, I'd lose all my data.  I don't know how to use the other HARD disk partition options. I tried to run ' explorer.exe task manager but get said there is no associated program with him and create an association in the Folder Options?  TA... MIke

  Hi Mike,.

  -Where do you see those three options?

  In the third option, I think it will just keep unchanged partitions, but the data will be formatted.

  Mike, sorry I forgot something important; You should have the same service pack installed on both computers to use the CD of Windows XP PRO for the recovery console.

  Kind regards

  Anil

• Sansa e250 questions

  Hello

  I'm new to this Ant thing, and I don't know if this problem has been addressed before, but it would be great if someone could help me!

  I got my sansa e250 for about 2 or 3 years now, I guess, and it has always worked well.

  I turned on the other day and tried to play a song, but it says "wrong track." I know that this can happen sometimes and thought nothing of it. but he spent with all the songs I played.

  In addition, the player was all deleted music out of my playlists and when I went to view album and artist, he said that he had nothing. but according to the song, he said I had 754 songs out there.

  I connected it to my computer and deleted everything on the player, it works and it was always in the same situation, with 754 songs, artists or albums and they were all the "bad tracks!

  very frustrating. I have tried everything I can think of, like everything reset and take the battery, all with the same result!

  When the device is plugged into the computer, it shows all the folders are empty. It is said that no space of memory has been used, there still 1.8 GB of left of the Hall. (what a 2 GB device)

  so if anyone knows what the hell is wrong with it or what can be done to remedy this, it would be greatly appreciated!

  Thanks in advance!

  It is possible that your cord is wrong. But try to reformat via Recovery Mode. I hope that your E250 is a unit v1 - you won't see Welcome to the recovery on a v2 Mode, so we need to try something else.

  It's the excellent Markster step by step:

  Now, to solve the problem.  The easiest way is to just reformat the drive in Recovery Mode.  This will delete all your files, however.  Here's how:

  Turn off the player.

  Slide the HOLD switch to the locked position.

  Press and hold the RECORD button when connecting to the PC.

  RECORD output once you see "Welcome to Recovery Mode" on the screen of the reader.

  You should now be able to find that a new removable drive in my computer called 16 MB-FORMAT.

  DO NOT TRY TO FORMAT THE VOLUME 16 MB-FORMAT!

  Are we clear on that?<>

  16 MB - FORMAT open and create a new folder named sansa.fmt on it in the root directory.  You can now slide the HOLD switch to the unlocked position, use the remove safely icon and disconnect the player.  It will be noticed the sansa.fmt folder, and he saw, format itself and reboot.

• new Seagate HDD - will not format of RAW

  

  0

  Hi all... I installed one out of the box of Seagate 2 TB disk SATA 5900 Barracuda.  Initialized the disc.  Did slow the format via the selected disk (on Windows Vista Home Edition 32-bit) with NTFS Manager and all other default settings on the left. The format took several hours.  When I came back in the morning, I saw the file system drive showing that "RAW". Disk management that the disk is 'Healthy Partition' and the letter has been affected.

  I tried to reformat fast when you are prompted by Vista (did not work).  I tried Chkdsk (did not work). I tried to reformat and it was stuck at 54% and wouldn't progress any further. Then tried to reformat via 4 x 500 GB partitions.  The first two partitions of 500 GB worked, the third 500GB does not... This would imply a bad sector? Right out of the box?

  Contact Seagate (or your provider) support because its new does not mean that it isn't DOA

• Need help with different types of conditional logic in a custom PDF

  Oh the life of a developer - get handed something a non-geek thinks is 'easy' with an unrealistic calendar, and you've never done before :-)

  Asked me to take a PDF custom built by a member of my group and make some changes.  I am running Win7 and using Adobe Acrobat Pro DC.

  What I have to do is essentially variations around a conditional logic; for example:

  If Renseignez Checkbox1, Checkbox2 becomes locked

  If Checkbox1 is filled, ComboBox2 becomes mandatory

  If the user has completed the PDF saved as 'Customer_0123' and goes back in to make changes, may I point out what has changed?

  I'm (very very) new to JavaScript and so I was confuse through some documents, but the "most recent" document, found at Adobe is 10 years old, and I'm not sure that it is always topical.

  Any help would be appreciated...

  Thank you

  Chris

  The best way to associate scripts with boxes is to use the MouseUp event. In this case you can access the value of the new field via event.target. value.

  And Yes, it is correct re the JS Console.

• The operating system disk

  Hi all.  I have an alien ware x 51 than Andromeda 2012 and, recently, I got hit by a virus that took less than 5 minutes to restart my computer and so I need to replace the hard drive.

  In the past I did a reformat via the start menu, but the hard drive is no longer usable, and I have no operating system disk for my Windows 7.

  How to get a copy of one of my purchase?  Can I still do?

  I prefer not to buy a new operating system if not necessary.

  

  How to apply the backup for your Dell computer CD:

  www.dell.com/.../EN

• StarWind iscsi storage problem

  Hello

  I'm new to vmware kindly help me

  I have create a laboratory at home to prepare for the vcp exam. When I create an iscsi storage using the starwind (external hard drive) image file and add it I try to add Storage in vmware storage it does not show the data store, but when I create an internal hard drive, it shows the data store can kindly help a whole to solve the problem

  Thank you and best regards,

  Knani V

  Hello

  Post moved to the vSphere storage forum.

  All data stores must be mounted/targeted through a vmkernel device if you want them to be used as a location for a virtual disk.

  Best regards

  Edward L. Haletky

  Host communities, VMware vExpert,

  Author: VMware vSphere and Virtual Infrastructure Security,VMware ESX and ESXi in the 2nd business edition

  Podcast: the Podcast for security virtualization of resources: the virtual virtualization library

• QUESTION: Disaster recovery for Test db with RMAN

  Hi friends,
  
  I'm working on ORACLE10g on RedHAt AS4.
  I'm doing on my test database using the catalog of recovery after a disaster, and I deleted all the contrl / redo n /datafile of the system parameter file, when I try to conneciting to Rman I got under question.
  
  
  [rman@linux1 bin] $. / target rman.
  Recovery Manager: Release 10.2.0.1.0 - Production on Mon 28 Feb 11:58:11 2011
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  connected to target database: RMAN (DBID = 1629436196)
  RMAN >
  RMAN > set dbid = 154326135
  executing command: SET DBID
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of order CSET at 28/02/2011 11:59:13
  RMAN-06188: cannot use command when it is connected to a mounted target database
  RMAN >
  
  
  My problem is... I m unable to set the DBID of my prod db, RMAN (catalog) connects to itself as the target of DB,.
  
  Any guys help?

  Looks like you have connected only to the catalog database.

  do not forget to target = database to restore

  so you should

  (1) set ORACLE_SID = db restore
  (2) rman
  target connection.
  Connect catalog...

• ORA-01017: name of user and password invalid. connection refused - Database Link

  Hi guys,.
  
  Could you help me, I have a problem connecting to a different database using the database link:
  
  * 1. I have added in the database 'customer' DEV2 tnsnanes.ora *.
  
  DEV =
  + (DESCRIPTION = +
  + (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.100.85)(PORT = 1521)) +.
  + (CONNECT_DATA = +
  + (SID = DEVDB) +.
  +)+
  +)+
  
  * 2. I tested my connection using tnsping *.
  
  Oracle@dev > tnsping dev
  
  AMT Ping utility for Linux: Version 10.2.0.1.0 - Production on July 10, 2010 14:35:35
  
  Copyright (c) 1997, 2005, Oracle.  All rights reserved.
  
  Use settings files:
  +/opt/Oracle/product/10.2/Db_1/network/admin/SQLNET.ora+
  
  
  TNSNAMES adapter used to resolve the alias
  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.100.85)(PORT = 1521)) (CONNECT_DATA = (SID = DEVDB)))
  OK (0 msec)
  Oracle@dev >
  
  * 3. In SQLPLUS of DEV2 I connect to my database using the tnsnames entry *.
  
  SQL > conn devuser/pwd001@dev
  Connected.
  
  * 4. I then create a database of link.*
  
  SQL > Create Database Link dev_Link
  + 2 Connect devuser +.
  + 3 identified by pwd001 +.
  + 4 using "DEV"; +
  
  Database link created.
  
  SQL >
  
  * 5. When I try to connect to the database using the database link, I get an error, but I'm sure that the password and user name are ok.*
  
  SQL > select * from global_name@dev_link;
  Select * from global_name@dev_link
  *+
  ERROR on line 1:
  ORA-01017: name of user and password invalid. connection refused
  ORA-02063: preceding the line of DEV_LINK
  
  
  SQL >
  
  
  What could be wrong...?

  Try to connect to the database via SQLPlus target using the tnsnames.ora entry: sqlplus bob@remote.

  If the target db is 11g, then breaking the password may be the matter. Try placiing the password in quotes when you create the database link.

  HTH - Mark D Powell.

• mount the NTFS partition via ESX 3.5

  Well, it seems none of the simple "out-of-the-box" questions will never come from my keyboard to this topic

  I have a SATA drive, everything works fine but I have a NTFS Partition on the same drive - Let's say sda1.

  ESX 3.5 seems stripped mounting ntfs file system - really not supported by the kernel, it is said.

  I read somewhere that this NTFS CAN mounted as ro (and I find it acceptable) fs, but I can't find any detailed instructions on how to perform this action.

  Is there some package rpm / which can be used for this or should I install some third-party software (link/name appritiated)?

  Once it is mapped, I would like to publish via samba to the network. Y at - it a samba server (I have already launched the client and mapped NTFS FOR Esx via fstab).

  Thanks for the replies!

  Hello

  You cannot use a ROW but a CRUDE disk will work. So you must first create a Raw Disk Metafile for that to work, or you can use the method described in http://itknowledgeexchange.techtarget.com/virtualization-pro/vmware-esx-storage-how-to-get-local-storage-to-act-as-a-raw-disk-for-vms/ to acquire these metadata files. Remember NOT to do this the target LUN/Partition that contains your NTFS.

  The Linux 2.4 kernel can only mount a NTFS in read-only mode if the driver exists. You can easily get this driver for your service console. It is not required for the vmkernel actually, just the service console. If you could get on the service console, but then what would you do with it?

  It is best to make a complete virtual machine blown by making CRUDE disk in a virtual machine. Then you can start simply and directly access the NTFS normal methods to which you are accustomed.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• Can I use my time capsule as desktop mounted hard shore via thunderbolt a usb cable

  Can I use my time capsule as desktop mounted hard shore via thunderbolt a usb cable

  No, but you can with an Ethernet one.

  (144234)