Setting IP error incompatible. SMU-8135
Hello NOR Forum,
I recently got a new laptop. I want it to work with the NI SMU-1078 chassis with controller Embeded PXIe-8135. I'm having a problem to connect to it. There is an error in Measurement & Automation Explorer > remote systems > NOR-PXIe8135-# > status "Incompatible IP Settings."
I tried this http://digital.ni.com/public.nsf/allkb/A0F6EFF8A33578948625749C006DEC3B , but it wouldn't let me change my static IP address. Help, please.
Hey waterox,
1 take a look at this article, because it seems to apply to your current situation-
Why can I not connect to my PXI real-time (RT) target on the network
http://digital.NI.com/public.nsf/allkb/24D16468DE8838B2862568E200746D7E
2. reformatting of the target can be a quick way to solve this problem. You should be able to configure the IP address of the target once reformatted.
3. make sure that your network card settings are correct on your host computer. The following document describes the process with a CompactRIO which should act the same as your real-time target.
Configure the CompactRIO with a static IP address
https://www.NI.com/getting-started/set-up-Hardware/CompactRIO/static-IP
4. how many NIC's a laptop? You have active Wifi? If Yes, take a look at this-
Best practices for using multiple Interfaces (NICs) with products OR
http://www.NI.com/white-paper/12558/en/
I hope this helps!
Tags: NI Hardware
Similar Questions
-
Error 'Incompatible Server Version' @ Orchestrator Client log in
We have recently completed ad vcenter 4.0 to 4.1 upgrade. During the upgrade, Orchestrator does not get installed automatically - probably because he wasn't there to upgreade. We use not Orchestrator before but wanted to start using after upgrade from 4.0 to 4.1.
I found and linked the Orchestrator article 4.1 of the DVD Installer. All went very well. Configured LDAP connected to Active Directory and tested. The database created on the MSSQL remote server very well. Needed for users and groups created in AD and specified for Orchestrator Setup. No installation no issues at all.
After setting Orchestrator to run as a service (on Win 2003 R3 64 bit server) and start the service, I launched the customer and tried to connect.
The client connects to Orchestrator at a certain level. If I enter the wrong credentials, I get an error 'user or incorrect password '. However, if I use valid credentials, the client responds by "Incompatible Version of the server" in the lower left corner of the logon dialog box. So what shit server is the wrong version, I ask? Only, it's there and don't answer me. FYI, I installed the 32-bit version of the Orchestrator client on a different physical computer inside an XP virtual machine (to use a 32 bit OS) just to see. He also noted "incompatible Server version' when trying to connect.
vCenter orchestrator and the two 4.1 - straight out of the zip named VMware-VIMSetup-all - 4.1.0 - 259021. My ESX servers are all 4.1.0 320092. Windows Server running vcenter & orchestrator is 2003 R2-64 bit.
My theory is that the version of Orchestrator comes with this package (as a separate installable application) 4.0 and 4.1 not. I say this because the plug-in configured in configuration orchestrator shows only a plug-in for 4.0.0 and not 4.1.0. That's what I think the mistake is trying to tell me... «I'm an orchestrator of 4.0 and I not connect to a vcenter 4.1.» The vCenterOrchestrator.exe inside the zip referenced in the previous paragraph is 205 705 bytes in length and is dated from 14/05/2010.
Anyone can check if above Orchestrator Installer is 4.0 or 4.1? If it is 4.1, do you have ideas about this error "incompatible Server version? It must be rare. Google could not find a thing on this string of words about Orchestrator. A research of the community forms was also discussed in white. So this post.
Thanks is advance for any insught!
Tim Pearson
Pittsburg State University
tpearson (! to <) pittstate.edu
Hi Tim,.
I tried the version that you specified in your message, for example 259021. What I've discovered, is that on my x 64 OS the correct Orchestrator is installed w / VC 4.1 plugin (check install directory\app-server\server\plugins\o11nplugin-vsphere41.dar).
So the facility, point of view, I think that everything should be ok. On the other hand, given that you have already installed the 4.0, you may have its instance orchestrator as well, for example you have 4.0 and 4.1 instances (in Program files and program files (x 86) directories).
Could be a workaround:
-Save your 4.0 installation. This facility must be in program files (x 86) \VMware\Orchestrator). To check this check the version.txt file.
-Save your 4.1. installation as well. This facility should be in the files\VMware\Orchestrator program.
-Once you have save your facilities export your configuration of 4.0: in the VMware vCenter Orchestrator Configuration go to the switchboard, the export Setup
-Then, uninstall version 4.0. To do this, go to the \Uninstall_vCenter <4.0 install="" directory="">Orchestrator and run the uninstaller are there.
-As a result, you must have only 4.1 installation located in above directory
-Run the orchestrator for 4.1 configuration and you will see that the vCenter server plugin points to the good version 4.1.
-You can import the configuration that you have already done in main menu-> import configuration.
I hope this helps.
Kind regards
Martin Marinov
4.0> -
I'm trying to connect a series of ENA Agilent Network Analyzer to my SMU 8135 controller, however, the connectors are different sizes, it is a sort of mini GPIB port or a national instruments specific port?
Do you know where I can get the right cable or find the right information on this communication.
Concerning
Yes, I did but only to check if it was a standard GPIB port, bypassing the accessories.
So the cable to purchase is the 'X 13 GPIB, MicroD25 cable to connector 2 M shielded cable/Standard' for £98
Thank you
-
SMU 8135 cannot ping pc when installing labview
HJ. Help me
my laptop do not install labview 2012 can ping with SMU 8135 but labview installed on my laptop cannot ping with SMU 8135. I don't understand
Hi ffefef,
Could you explain in more detail the question, you encounter?
Thank you
-
2.2 RDCman install remote desktop on windows 2003 server util fails with the error: incompatible version of c:\windows\system32\mstscax.dll
CAN ANYONE HELP?
Hi Mordi26:
This could be because windows server 2003 is not updated with the latest version of the Terminal Server client. With terminal services client 6.0 update... It should solve the problem. Here is the link to download:
http://www.Microsoft.com/downloads/en/confirmation.aspx?familyId=cc148041-577f-4201-B62C-d71adc98adb1&displaylang=en
-
cannot set file error when trying to put the photoshop button in adobe muse, he is not 'supported color space. Resave image RGB or grayscale.
I believe that this is already the answer here:
https://forums.Adobe.com/thread/1917435
Thank you
Sanjit
-
I tried to use the conditioner of MultiSCO inside Captivate 9 on Mac to build a course with modules published with SCORM 1.2.
It gives me an error message that it is an incompatible SCO file!
How can this be? MultiSCO package manager is perhaps not current with the latest version of Captivate?
I have a class of nine modules I need to a LMS customer this week.
Help!
Gary
The Multi-SCORM CAN packaging tool create the SCORM 1.2 and 2004 packages. But you must select one you create when the dialog box opens.
I would say maybe you left the SCORM 2004 default setting and that's why you may receive an inconsistency error message when you tried to load up with SCORM 1.2 published content.
-
iMovie 10.1.2 falls down during editing of a film, usually by doing something like adding a title or a transition. Failed attempts to restart. Try to reboot with the option key + command allow you to remove preferences. Then either receive an error indicating that the graphics card is incompatible or the application block requiring a force quite. Restart or stop the iMac translates the suspended system requiring a manual stop holding down the Start button. Restart in Safe Mode and then the normal startup will allow iMovie to load. But after a few minutes of work with the program, it crashes and scenario again. I use El Capitan 10.5.11 on an iMac of 2013. I deleted the iMovie app and reloaded it, no change. Someone has an idea for a fix?
What are the specifications of your clips you want to change? Try to create a new user and see if FCPX is behaving.
-
Browser setting change error report
Receive error browser setting changes every ten minutes.
"An unknown change has been detected on your browser search settings" there are two options to check. 1. keep your current settings. 2. I am aware of the changes and approve it.
I can select either option and then click on the Yes button, but the system is not responding. It won't let me close the window by clicking the X in the right corner. The only way to remove it is to close the window in the taskbar
Tobbi,
Thanks for the link to solve my problem. The problem was with one of the Add-ons. This is the toolbar that I thought that I had deleted, but felt that it was still active in the list of Add-ons. Deactivated, it solved the problem. I had deleted since.
Roger
-
ERROR-235140 SMU-4139 self-test
Hello
I get an error with my SMU-4139 module. I have a chassis SMU-1075 configured with 2 NI PXI-4070, NI SMU-4139 2 modules and 3 NI PXI-4130 modules.
When I start my computer, a SMU-4139 module lights up with green and active green access light. The other SMU-4139 module will turn - on the same path, but in a short time, access turns off the light and the light turns red. I tried to run the automatic test NI Max, but I get this message.
The test failed.
-235140
Internal hardware error occurred in Power_Supply material. Please contact the support of National Instruments.I tried to change its slot SMU, but I got the same error. Should I send this card in Checkout?
Thanks a bunch!
Hey,.
I wanted to give an update about it. I uninstalled OR-DCPower (I think I got the version installed 1.9) and installed NOR-DCPower version 14.1. Everything works very well.
-
After having included an implicit call to a dll, I created in LabVIEW, I get the error link next project, incompatible type declarations for external symbol '_TheActiveMeasurementPath' modules ' c:\Home\EChamberSystem\cvibuild. ECALsystem\EGunControlHandler.nidobj' and ' c:\Home\EChamberSystem\cvibuild. ECALsystem\AlarmsAndWarnings.nidobj'.
What does that mean?
After checking your function prototypes as Ray says, I just delete the directory cvibuild (under the directory of the project) which is where are all the niobj files and rebuild your project. There is a rare combination of events where the compiler/linker CVI knows not to rebuild it. If you remove the cvibuild directory, it will force you to completely rebuild.
-
How can set defender error 0x800106ba
I have problems with windows defender, I can not install programs as defender didn't work.
Hello
Are you running MSE or other antivirus/security programs stop Windows Defender running?
Whether Windows Defender is blocked from running by them. McAfee, AVG and many others to do this.
MSE includes features of Windows Defender inside run that separately it would be redundant.------------------------------------------------
Troubleshooting of Windows Defender
http://support.Microsoft.com/kb/555957"%ProgramFiles%\Windows Defender\MsAsCui.exe" is the folder of the default Defender
Start - type in the search box-> Windows Defender - find top - make a right click on it.
RUN AS ADMINIf no joy using Start - computer or Windows Explorer to access this folder and create a
Shortcut to put on the desktop and the Start Menu. You can also right click on a shortcut this and
see if they point to here.Goal
"%ProgramFiles%\Windows Defender\MsAsCui.exe".Start in
"%ProgramFiles%\Windows defender.How to enable or disable the Windows Defender
http://www.Vistax64.com/tutorials/93118-Windows-Defender-off.html--------------------------------------
Maybe something here if necessary:
What is display / causing the error message? Some anitvirus/security/antispyware products can
cause this error. On those who use you, including those that your never had even those
uninstalled (the remnants can cause problems). McAfee is just an example of what many can do.Start - type in the search box - Services - find top - Right Click - Run as Admin
Windows Defender - value STARTED and AUTOMATIC
or set MANUAL and STOPPED if necessary
Fix for the problem of 800106ba.
http://support.Microsoft.com/kb/931849Error (an example) of McAfee report.
http://service.McAfee.com/faqdocument.aspx?ID=TS100610&lang=en_US&prior_tid=2&AnswerID=16777216&Turl==http://KB.McAfee.com/InfoCenter/index?page%3Dcontent%26id%3DTS100610%26actp%3DsearchCheck also:
I hope this helps.
Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.
-
X 60 (6365CTO) - unable to access the fan to set "Fan Error"
Symptoms to turn on the computer:
- the fan runs for about 5 seconds,
- Intel/ThinkPad/lenovo logos appear for about 30 seconds,
- the screen darkens,
- 2 short beeps,
- "Fan error" appears in the upper left corner and
- the computer turns off
Action taken:
- Blast compressed air into the fan breaks down, "fan error" suite
- Using the "Tablet ThinkPad® X 60 and X 61 Tablet Hardware Maintenance Manual" - 1200 fan on page 87 (http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/42x3551_02.pdf)
- = Removed the battery (1010 page 55)
- = Removed hinge (1040 page 60)
- = Removed the keyboard (1050 page 62)
- = Keyboard setting removed (1080 page 67)
- = Removed PCI Express Mini Card for Wireless LAN (1120 page 74)
- = Not applicable in order to clear the PCI Express Mini Card for network EXTENDED wireless (1130 page 75)
- = 'Loose' Assembly LCD (page 74) (has not deleted)
- == Lost overall to switch Bluetooth cable and base cover on page 83 pen
One of the steps in "set pen to switch, cable Bluetooth and the basic coverage" must "remove the stand from the shield. In my 60 X, it seems to be a card (FRU PN:41W4177), which is to provide support. The Board of Directors is fixed by 6 screws or rivets. This forum is not visible in the manual diagrams. Note: the cables leading to the LCD screen run under the Council.
Would appreciate help or advice.
Thank you very much!
Laura
Laura
Have a look here http://www.lenovoservicetraining.com/ion/X60/index .html
Hope this helps
John
-
Epson printer utility set up error 1131
Please can anyone advise me on what I would do I get the above error when you try to install the printer driver for Epson XP - 305?
Thank youHello
Thanks for posting the request in the Microsoft community forums!
It seems that you can not install the printer driver for Epson XP-305 on the computer. Provide us the informationYou did changes to the computer before the show?
Let us try the troubleshooting steps to resolve the installation of printer driver on the computer.
Place the computer in a clean boot state, and check if you are able to install the printer driver.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.Try to install the driver from the link:
http://www.Epson.co.UK/GB/en/viewcon/corporatesite/store/products/mainunits/support/11536
Check out the link:
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-driversWe know if you need help with the Windows operating system. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.
-
Cisco ACS SE "set ip" error: could not set up new NETWORK card configuration.
Hello
I get the error "error: could not set up new NETWORK card configuration." When I try to set the IP ACS SE.
When I called into the device image and tried to do an initial installation, the IP to not hold after the restart and went back to the default value.
I went by NetPro and apparently it is a common problem. One person it is solved re-imaging unit, but who has not worked for me.
Someone there with a solid solution? I use NIC 1 FYI.
EDD.
Ed,
Please make sure that if ACS is associated with active before setting Ethernet connection
or change the IP address of your ACS system engineer.
Kind regards
~ JG
Maybe you are looking for
-
Greetings! First post of this forum and a relatively new user of any kind of Tablet. Yes, sorry if I miss some "Exchange of detachment" to ask for the help. There is a NEW Tablet and after download/installation of operating system updates, went to d
-
can't see changes to the photo in real time during editing
Hello When I edit photo it won't let me see the changes in real time, unless I turn down hardware acceleration. I tried the update of windows and even downloaded the drivers two charts, but no solution. I read may be due to software mcafee, but I do
-
Notification for feeding area icons network are mising - usual bugs do not help
I know there are a lot of posts with suggested corrections and believe me I've been gong through them for several days but - seems every time that windows update will update my Vista, I lose one or more of the notification area system icons. Currentl
-
I had to do a system restore a few weeks, now I start and get the message "the windows vista product key you typed is invalid for activation" but he worked for 4 years. now HP tells me I pay $ 130 move to 7 since vista is old.
-
Printer-Canon mp450 - looks like its printing, but pages are blank.