Refresh the desktop after login

Similar Questions

• NO ICONS ON THE DESKTOP AFTER LOGIN

  My Windows XP don't block on my desktop icons after the connection. None appear on the screen. Please help. "

  Hello

  1 restart the computer and hold the F8 key by typing on the keyboard.

  2. you would reach the Advanced Boot Options Menu

  3. from there, choose the Option - Safe Mode

  4. If you are able to show the desktop, and then click Start > run > Type "msconfig".

  5. click on the start up tab and then click on disable all down right.

  6. click on the tab Services, check in the box "Hide all Microsoft Services" at the bottom left, and then click Disable everything down to the right.

  7. at the bottom dead, click OK after that, you will be asked to restart the computer.

  8 restart the computer normally and check if the problem is solved or not.

  If the problem is not resolved please answer a few questions below

  -Are you able to view the cursor of the mouse on the screen

  -You are able to view the Start button, when you are facing the problem.

  Keep the thread posted, as well as the other can be helped! If this solution allows you, please mark my post as an answer to your problem.

  Saurabh yapi | E-mail address is removed from the privacy *.

• Windows 7 takes a long time to load the desktop after login

  Hello

  I am using windows 7 on my HP 530 laptop. My friend who installed and activated, but I think that it has installed the cracked version. After installation, it was really perfect. but after a while when I connected to the internet, some updates have been installed, and then when I logged in the windows, he invites me that you are using a pirated version or something like that (I don't know more actually). then I restored to my previous state and then everything was fine. After that I stopped the automatic updates, but these days my startup window is having a few problems. After entering the password, its taking a long time to load the office and its keep on the list "loading, please wait...". »

  I'm so sick of that, also, I have to restart my laptop by pressing the power button, and after the reboot, it works fine. But I need someone to answerwhy its taking a long time to load the desktop...?

  Also, please give me some advice to solve this problem, keep this idea in mind that my computer is virus free and got a good processor and RAM. I installed my windows in the C drive, and in my C drive only almost 2 GB of space is left (or almost). and there is no program running auto in msconfig, other than gtalk, Skype, etc.

  I'll be really grateful if someone please give me the solution.

  HP would have provided your preinstalled laptop with win, they would also have provided a way to recover your laptop to the specifications of the factory, either through discs of recovery or a hidden restore partition that you need to access in order to make recovery disks. How do you access a recovery partition is an option of HP, is not dealing with a MS - visit the HP website, specific to your model for more details on how.

  If an illegal win7 version has been installed, or you have to buy version of win7 you need, or you need to recover your laptop provided that the factory provided, by doing so, you lose everything on the phone, if you have lost or that you can not do the restore cd and then telephone HP support they would usually provide records for a small fee.

• Refresh the screen after the removal of the UI elements

  Hello world

  I create a screen in which I use listfield to display data online as a way each line has a button Delete. I want to know how to refresh the screen after the deletion of data or a row of the screen?

  Because you actually using a HorizontalFieldManager to display each line, to remove it, you must remove the information in the underlying data store and then delete it HFM of his Manager.  That's it, removing the HFM will refresh the screen.

• Bridge does not refresh the thumbnails after changes in ACR.

  Bridge does not refresh the thumbnails after changes in ACR. Cultures made in ACR do not show more. I think it started after new ACR update. I have the last bridge and ACR and Photoshop.

  I thought about it. I have reset the settings of the bridge by pressing Command-Option-shift and then started bridge on my Mac. I lost my sight, I got but should display what I want to see again. But it solved the problem of the bridge not updated after modified ACR.

• Refresh the page after the fires of fileDownloadActionListener

  Hello experts!

  I use jDeveloper 11.1.1.7.0

  I have a table in a fragment of page jsfff with a button to upload the files that are shown in this table. After downloading the files, I need update the table.

  Downloading files when the user presses the button (partialsubmit = false) I invoke another button hidden (partialsubmit = false) which has af:fileDownloadActionListener that performs the action. (This is because I am doing other activities before you download files)

  It works fine, but I need to refresh the page (among others) after downloading the files. How can I do this?

  I tried to update the table of

  -method fileDownloadActionListener

  -Method of hidden commandButton action

  -The partial trigger table button

  But I could not update the table with any of these

  How can I refresh the table after uploading the files?

  Yes.

  I'm looking at the source code for FileDownloadActionListener.processAction ().

  After invoking the method property, he calls FacesContext.responseComplete (); which ignores the render response phase.

  And so you can not rynefall page at all.

  An in-depth, that you can do, is to use af:poll, IE, activate the survey by clicking on the button visible (in javaScript)

  Here you can see how to start the survey by javaScript:

  GEBS | Oracle Fusion Middleware 11g ADF progress indicator

  (search handlePoll )

  In the pollListener, you can refresh the page AND also disable survey by itself (by calling setInterval(-1))

  After questioning to stop, you must refresh the survey component, with

  AdfFacesContext.getCurrentInstance (.addPartialTarget(...your_poll...whatever));

• What is the best way to refresh the table after autosubmit (10.1.3.4)

  What is the best way to refresh the table after autosubmit?
  
  I have a page that contains a table where if one of the fields is changed it autosubmitted where the view object changes some attributes, based on the field having been changed. I need these modified attributes that appear in the table. But without doing anything, the only way to see these values is to cause the iterator updated table.
  
  I've been refreshing the table is having a method in a grain of beacking called "getSystemSettingIter.getCurrentRow ();". This seems to be a bit of a hack for me and I was wondering if there is a better way to get the table to update.
  
  Thanks in advance!

  Have you tried setting between the two partial page refresh?
  http://www.Oracle.com/pls/as111120/lookup?ID=ADFUI385

  http://download.Oracle.com/docs/CD/E15523_01/Web.1111/b31974/web_form.htm#CACEIEEI

• Only get a blue screen on the desktop after starting the computer.

  Original title: after the empty office startup

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Windows Vista operating system - why only empty office display blue screen with no program icon shows the office after the computer starts?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi osterjo,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  I suggest to start the computer in safe mode and check if it works very well.

  To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

  Check out the link for more information on starting your computer in SafeMode below:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Please return back with the results to help us continue with troubleshooting.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to get all the icons on the desktop after installing xp

  After installation of xp only recycle bin makes its appearance. How to get all the other program on the desktop icons?

  Like internet explorer, my computer...

  Hello

  How to create a shortcut on the desktop?

  If the item is located in the start menu:

  1. click on start. The start menu appears.

  2 find the item that you want to create a shortcut. If the element is in a submenu of the menu, go to the submenu.

  3 right click on the element. A context menu is displayed.

  4. click on send to. A submenu appears.

  5. click on desktop (create shortcut). XP creates a shortcut to the item.

  _____________________________________________________________________________

  Here is the vista forums

  Try the xp forums at the below link for any other question of XP

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• Stuck on blue HP Invent screen and not loading Windows not items on the desktop after you done a system recovery

  Hello, this is my first time posting here, because I'm in desperate mode!  I have a HP Pavilion Slimline s5304y using Windows 7, desktop pc that I bought in February 2010.

  After getting a virus on my computer, I ordered system of HP recovery disks, and made to factory settings recovery process (twice!), however, during the Windows install process, it never cross the blue HP Invent screen that says:

  -Do not turn off your PC during this unique installation process

  -Your PC will restart several times during the installation process

  -Messages may appear on your screen. Ignore these messages until you are prompted to restart or shut down your PC

  To the bottom of the screen, it keeps saying "Please wait...". "with a green scroll bar. What I see is the buttom to start at the bottom left corner but I am not able to access anything whatsoever and I never get my desktop screen or the desktop icons. I restarted and closed several times, and as soon as I log on windows, I just get the same blue screen.

  The 2nd time I did the recovery process, I let him continue overnight (just in case I was not waiting long enough) and my computer never stop as it was supposed to when the installation is complete.  In addition, the whole process, I looked the first time around and my computer never restarted as he said he was supposed to; It seems to just be stuck for the rest of the installation procedure for windows.  There finally comes to switch to "standby" mode.

  I have nothing plugged on the other except the power cord, monitor, and keyboard/mouse.  I have not installed new hardware since I bought the computer.

  I did a test of diagnosis and everything going on.

  I tried to get help from HP Support, but because I am out of the warranty period, they cannot help me and want to charge me $99!

  I don't know what else to do at this point. Can someone please?

  Thank you.

  Hello

  Assuming that maybe that's a problem with the recovery discs, it is a simple work-around if you have (or can borrow) an installation disc Windows 7 at retail which is exactly the same version as your OEM installation - IE if your PC comes with Windows 7 Home Premium 64-bit, it comes to the exact retail version that you would need.

  If you do not access to the retail drives, you can create an installation disk yourself - just download good picture disc from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD.  These Images are clean and a well respected source, however there are only limited versions available.

  http://www.mydigitallife.info/Download-Windows-7-ISO-official-32-bit-and-64-bit-direct-download-link...

  Use the disk to perform the installation, enter the activation key of Windows on the sticker COST on your PC on demand, and when the installation is complete, use the 'method of phone", described in detail in the link below to activate the operating system - this method supported by Microsoft and is popular with people who want just a new installation of Windows 7 without additional software load normally delivered with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  Additional drivers, you may need can be found here.

  Kind regards

  DP - K

• refresh the report after you close the modal popup

  Hello

  I try to call page editing as popup modal as in this example below.

  http://Apex.Oracle.com/pls/Apex/f?p=45420:3:0:no:

  It works fine, but after you change/update a registration and closing of the edit page, is not refresh the main report page (first). How can I change so it refresh the report calling when closed. Please NOTE: I do not want to refresh the whole page, but only the report after you close the page modal popup.

  Apex 4.2

  Thank you in advance... regards

  It worked, now missed me the branching code and the parameter by js... Thank you

• Get the end user to refresh the Desktop view

  Hello

  Is it possible to give the end user access to Refresh (roll back to the original state) office. IM taking on refresh does not reset. ?

  Can someone help me with this please.

  Thank you

  Mumtaz

  There is no way to do this via the customer to view.  You could always give locked permissions on the administrator view page or simply put the desktop computer to refresh on logoff, so that it is regenerated each time.

• Refresh the table after popup

  I have a popup that the user gets when they click my button 'Add '. The form inside the pop-up window is linked to the same database as the table.
  The table that his partialTrigger is configured for the popup and when I opened the popup, I see the new row in the table which is ok. However, when I click the ok button in my popup and data are saved in the database (with a commit), the table does not get updated.
  How can I do so?
  
  These are fragments of my code:
  
  the table:

  <af:table value="#{bindings.RekeningFullVO1.collectionModel}"
                              var="row"
                              rows="#{bindings.RekeningFullVO1.rangeSize}"
                              emptyText="#{bindings.RekeningFullVO1.viewable ? 'No data to display.' : 'Access Denied.'}"
                              fetchSize="#{bindings.RekeningFullVO1.rangeSize}"
                              rowBandingInterval="0"
                              filterModel="#{bindings.RekeningFullVO1Query.queryDescriptor}"
                              queryListener="#{bindings.RekeningFullVO1Query.processQuery}"
                              filterVisible="true" varStatus="vs"
                              selectedRowKeys="#{bindings.RekeningFullVO1.collectionModel.selectedRow}"
                              selectionListener="#{bindings.RekeningFullVO1.collectionModel.makeCurrent}"
                              rowSelection="single" id="t1"
                              partialTriggers=":::popAdd">

  the pop-up window:

  <af:popup id="popAdd" popupFetchListener="#{RekeningBean.addPopup}"
                    contentDelivery="lazyUncached"
                    popupCanceledListener="#{RekeningBean.cancelAdd}">
              <af:dialog id="dlgAdd" title="Rekening toevoegen" dialogListener="#{RekeningBean.addListener}"
                      affirmativeTextAndAccessKey="Toevoegen" cancelTextAndAccessKey="Annuleren">

  RekeningBean:

      public void addPopup(PopupFetchEvent popupFetchEvent) {
        BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
        OperationBinding createInsert = (OperationBinding) bindings.get("CreateInsert");
        createInsert.execute();
        
        if(createInsert.getErrors().size() > 0) {
            List errors = createInsert.getErrors();
            Iterator it = errors.iterator();
            while(it.hasNext()) {
                System.out.println("Error: " + it.next());
            }
        }
      }
      
      public void cancelAdd(PopupCanceledEvent popupCanceledEvent) {
        BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
        OperationBinding createInsert = (OperationBinding) bindings.get("Rollback");
        createInsert.execute();
        System.out.println("Rollback");
      }
      
      public void addListener(DialogEvent dialogEvent) {
        if(dialogEvent.getOutcome().name().equals("cancel")) {
          BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
          OperationBinding createInsert = (OperationBinding) bindings.get("Rollback");
          createInsert.execute();
          System.out.println("Rollback");
        }
        else if(dialogEvent.getOutcome().name().equals("ok")) {
          BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
          OperationBinding createInsert = (OperationBinding) bindings.get("Commit");
          createInsert.execute();
          
           System.out.println("Commit");
        }
      }

  So when I run the validation, the table must be informed that the data has been updated but who can't... My popup closes and the blank line in the table remains the same. When I press F5 to refresh the page, I see my data. How can I do this without making the F5?

  I guess the problem is that the trigger part that you put on the table gets called before validating the data in the code of the bean.
  Try adding a partial trigger in the bean code that refreshes the table.
  Put an ID to your table (or link the table to the bean), then use the code below to trigger an update after the transaction commit or rollback.

  
             UIComponent ui = JSFUtils.findComponentInRoot("tableid");
             RequestContext.getCurrentInstance().addPartialTarget(ui);
    
  

  Here is the code for the findCommponentInRoot method:

      /**
       * Locate an UIComponent in view root with its component id. Use a recursive way to achieve this.
       * Taken from http://www.jroller.com/page/mert?entry=how_to_find_a_uicomponent
       * @param id UIComponent id
       * @return UIComponent object
       */
      public static UIComponent findComponentInRoot(String id)
      {
          UIComponent component = null;
          FacesContext facesContext = FacesContext.getCurrentInstance();
          if (facesContext != null)
          {
              UIComponent root = facesContext.getViewRoot();
              component = findComponent(root, id);
          }
          return component;
      }
  
      /**
       * Locate an UIComponent from its root component.
       * Taken from http://www.jroller.com/page/mert?entry=how_to_find_a_uicomponent
       * @param base root Component (parent)
       * @param id UIComponent id
       * @return UIComponent object
       */
      public static UIComponent findComponent(UIComponent base, String id)
      {
          if (id.equals(base.getId()))
              return base;
  
          UIComponent children = null;
          UIComponent result = null;
          Iterator childrens = base.getFacetsAndChildren();
          while (childrens.hasNext() && (result == null))
          {
              children = (UIComponent) childrens.next();
              if (id.equals(children.getId()))
              {
                  result = children;
                  break;
              }
              result = findComponent(children, id);
              if (result != null)
              {
                  break;
              }
          }
          return result;
      }
  

  Timo

• Refresh the table after the creation of the new BO of Toplink

  Hello
  
  I have the following problem and I hope someone can help me. I use ADF11g/Taskflows with BOs TopLink-mapped (no ADF BC).
  
  Consider the Taskflow (s) following:
  
  the main activity is a (display) jsff page showing a table of BOs. From this point of view, two actions-defined results are called 'Edit' and 'create '. The edit action called an another Taskflow constisting of a pageFragment, showing the detailForm of the Soundtrack of data. This Taskflow has an input and output parameter (Soundtrack edit) and two are called "save" and "Cancel". Add Action calls a method called "createNewBO" first, and then calls the Taskflow mentioned also. Each Taskflow has ist own Bean managed in the pageFlowScope to work as a controller and DataControl to the TaskFlow and directly included views.
  
  The edit action works fine. The action also add except that the table of the default activity of the first taskflow does not update after return from the second Taskflow. I tried to put the property of refreshment in the PageDef of all possible values, in combination with the RefreshCondition, but no combination works. I can do a manual refresh or change the sort then the new Soundtrack is shown in the table.
  
  Is it possible to call a refresh of a jsff since a taskflow or I can force a refresh on entering the jsff?
  
  I am really stuck and appreciate any help ;)
  
  Friedrich

  You can try this:

  -on your taskflow diagram select the page that contains the table that you want to update, and add a Page parameter (from #{true} # {viewScope.refresh})
  -in pageDef page add an invokeAction in executable files and that it points to methodAction which fills the iterator to update
  -for newly created invokeAction, value refresh ifNeeded and condition of refreshment to #{viewScope.refresh}

  This should refresh the iterator each loading of the page (fragment).

  I hope this helps!

  Pedja

• scanned document not to transfer on the desktop after put 10.11.2 updated

  HP Officejet Pro 8610 scanner can be controlled by OS X but scanned document does not appear on the desktop as shown on the details page.

  Update.  File can be found in "All My Files" but it's not the location that was requested on the scanning.