Refreshing Temporary\Backup license

Hello

My University has a campus license - that works when I log onto their network.  When I work somewhere else without a network connection, the screen rises initially saying: I have a temporary license for 30 days (or less)- and after I click on through this works very well.  Unfortunately, it is not updated back to 30 days when I me re - connects to the network license - which is a problem because I have work to do in the next week where I'll be without network connection and I have only a few days on my backup license.  How to reset to 30 days?

JP

Also... Never turn off my computer is another option!

JP

Tags: NI Software

Similar Questions

  • Refresh temporary interface used in research

    I use the temporary interface of a search data store.
    temporary interface uses the schema of database for storage.

    How to refresh the data of consultation? I can see that the interface that uses just search refers to the table.
    Do I have to run my temporary interface manually (or just before the main interface) to ensure that my research is up-to-date?

    Yes.

  • Veeam Backup licenses...

    Buenos dias,

    Alguien sabe y me el Veeam Backup can of is fired from the como explain?--are the best tool of pago that exist para realize form VM?...

    MUCHAS gracias to photos,.

    Saludos

    Hola Alpacino777:

    Socket = CPU fisica. Back of if tiene you servidor (pensado that sea uno) socket = 2 CPU have Québec comprar Veeam licenciado para 2 Sockets.

    A greeting.

  • Is the license needed to hit the backups on tapes?

    Hi all

    Our Organization is planning to have Oracle implemented in our business processes, and we plan to have RMAN to hit backups.

    Our application server, Oracle database and applications are allowed. As you know there are 2 ways to hit the tape via the Oracle secure backup backup and media management layer, I wanted to know because we have the "HP DL380 G6" server can we use the media management layer to hit backups on tapes and do we need licenses for it.

    I think that we need secure backup licensing Oracle, but my question is what is the case in the media management layer.

    best regards,

    A.R.M Asif wrote:
    Thanks for the quick reply Rajest...

    Most welcome :)

    Will the procedure mentioned below if management limited in case out for a third-party media management layer (most likely they used), but as an alternative will be the following:

    1 perform RMAN backups on record (as backupset).
    2. take these backups copied to RMAN through OS command.
    3. copy backups on disk to a tape if the tape backups are necessary if the backups on disk are not available.
    4. run the RMAN catalog command to detect the backup
    5 restore and recover the database

    Yes it will work...

    Concerning
    Rajesh

  • my mac is the display of the comment... No backups for 13 days.  Connect to a power outlet while your backup disk is available.

    My Mac is the display of the comment... No backups for 13 days.  Connect to a power outlet while your backup disk is available.  For my time Machine control, everything seems to be saved.

    Time Machine also creates temporary copies on your internal drive when the backup drive is not available. So you can see the 'temporary' backups on your internal drive.

    I recommend that you connect your external drive and your power adapter and let make a permanent copy - ones on your internal drive are subject to deletion if space is short.

    By now he may need to do a 'deep traversal' which can take some time.

  • iTunes is no longer performs a new backup after synchronization

    With the help of iTunes 12 plus 6 s iPhone

    I would like to connect my iphone to my Windows PC and perform a manual synchronization every few days instead of using icloud backup or wifi sync.

    Now when I connect my phone and press Sync, it performs "Steps 1-3".  In my view, that it used to take "Steps 1-5".  One of the steps has been refreshed the backup stored on the PC.

    If I click 'Back Up Now' it works very well and stores a fresh backup - but I prefer the old behavior: I plug, click Sync, and in addition to the sync all apps, etc., it should perform a new backup.

    Ideas?

    Thank you/jim

    Hi, Jim.

    Thanks for the question!  I see that you want iTunes to launch a backup when you sync your iPhone 6 s more.  It is a normal behavior when your backup is enabled on your device. To get there you have to turn off iCloud backup directly on your iPhone in settings > iCloud > backup.  Once this is done iTunes backup the device on the next synchronization without having to select the manual backup option.

    When you save using iCloud, you cannot simultaneously use iTunes to automatically save to your computer, but you can use iTunes to manually save to your computer.

    Backup iPhone

    You can always reactivate iCloud backup on the device if you want to use this option.  If you do not want to disable backup on the device, you will need to manually backup device.

    Please visit Apple support communities.

    See you soon

  • Backup in cRIO controller file

    Hello world

    Im working with a LVRT application that includes monitoring of the signal and send these values to a server of SQL database (online).

    My clients ask me if it is possible to record a 'backup' file in the cRIO controller, this file will be created if there is an error connecting DB, when the situation becomes 'ok' (after a desconnection) I need the backup of the output file and send the data to SQL server.

    What is the best way to do it? I mean the best way to save the data in a cRIO controller. I read a little of PDM, but I'm not sure how to write the correct path to save the file in the cRIO.

    BTW: Im using OR cRIO-9074

    Best regards

    RK

    The filepaths in RT are the same as they are in Windows, at least with regard to your LabVIEW code worries. The cRIO drive is C:. You can create a folder on this drive (either programmatically or by using an FTP client) and record your temporary backup file in it.

    Regarding the choice of the file format, it is to you. Text, binary, PDM, is convenient for your application. However, the flash drive on a cRIO has a limited number of cycles number writing (somewhere between 100,000 and 1 000 000) so you can not write to him constantly at high frequency. If you do this when there is a connection error, and these errors occur infrequently, so I don't you worry about this.

  • Terminal Server license EXPIRING under Advanced Server 2000 Services

    We will be upgrading to a new server (using windows Server2008) S/W & hardware with a new provider in the next 6 months. However, we need to use Terminal Server services for the next 6 months on our current Server 2000 advance server until we have transitional...

    We just started having this message when logging in remotely: "your Server Terminal services temporary client license will expire in 13 days. Please contact your system administrator to get a permanent license. »

    Although advanced server 2000 is not supported, we need to access the remote server for about 6 months until we do the transition...  We are a very small medical office and if we cannot access the server remotely, we are in big trouble! Our doctor S/W is old and is no longer sold or taken in charge by the seller.  We were told that it would not go on the latest server software that is available.

    Is it possible to temporarily reactivate (period 6 months) the license for Terminal Server services?  I thought we had a permanent license and have never seen this message before. My guess it is initially set to expire at that time.

    Is there something we can do?  Registry editing? Y at - it another software that we could use instead of the Terminal services Server to temporarily access the Advanced server 2000 remotely, once the Terminal Server services license expires? Can we buy a license 'enewal"for a period of 6 months/1 year until we have to transition?

    I hope someone can help us, any help is greatly appreciated!

    Hello

    You can ask your question on Windows Server here on the TechNet forums. They are a team who assists the server problems.

    https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

    Hope the helps of information.

  • VMware Server Version 2.0.2 - migrate VM to ESXi 5.5?

    Hey guys

    I use an old Dell T410 with VMware Server Version 2.0.2 (Build 203138) server running on top of serving 2008R1.

    I'm looking to install a new server and you want to run ESXi 5.5.

    Is it possible to convert VM VMware Server Version 2.0.2 (Build 203138) to ESXi 5.5?

    Otherwise I'm running Shadowprotect. If I can't convert, is it possible to do a HIR to ESXi 5.5 from an image of a VM from VMware Server Version 2.0.2 (Build 203138) Shadowprotect?

    Finally, I was looking for to run ESXi 5.5 Essentials (not more) on the new physical host and then use the old host as a temporary backup with ESXi 5.5 too. I have to buy 2 x 5.5 ESXi licenses to run it on both machines?

    If you want more specifications about the network made me know.

    Kind regards

    Aaron

    Hello

    You must convert the virtual server computers to be able to run on ESXi 5.5.

    Take a look at this, it is perhaps useful:

    How to migrate computers virtual vmware server to vSphere, ESXi

    On the essential, it allows to manage 3 servers (servers esxi) with up to 2 processors of each:

    Editions of vSphere, vSphere is? Leading Virtual Infrastructure | United States

    But, with just the basics, you will be things like HA.

    Best regards

    Pablo

  • Activity do not sync after watch os 2.2 update

    Hello

    it been 2 days now that I updated to look at OS2.2 and did not get synced on my phone (stand, move, exercise) activities.

    As you can see int ht screenshot, I'm quite a heavy user of this feature, so I'm pretty bummed I lost my story for 2 days now.

    Unfortunately, I have not found all of the messages in the community that address specifically, however I tried to re-initialization, reset, disconnect, etc and nothing seems to work.

    Thank you in advance for letting me know how to proceed.

    Santiago

    Hi Santiago

    Check the fitness of follow-up is always on:

    -On your iPhone, go to: settings > privacy > Motion & Fitness - check that fitness and health monitoring are enabled.

    -On your iPhone, in the application of the Watch: Watch My > privacy > Motion & Fitness - make sure the heart rate and fitness tracking are each enabled.

    Otherwise, given the steps that you have already tried, can contribute to restore and restore your iPhone and Apple Watch:

    • Backup your iPhone:
      • Via iCloud (encrypted as standard), or;
      • via iTunes on a computer - IMPORTANT: choose to "Encrypt iPhone backup", so that the backup contains sensitive data, including the data of health and activity, saved passwords and settings Wi - Fi.
      • https://www.Apple.com/support/iPhone/backup/
    • Erase content and settings on your iPhone:
      • iPhone: settings > general > reset > erase all content and settings.
    • Pair and set up your watch:
      • Choose to restore the watch (backup restore) when provided the opportunity during the whole.
      • This will restore most of your data and settings, with a few exceptions (for example cards Pay Apple, access code).
      • Set up your Apple Watch - Apple Support

  • How can I delete the history on the ACTIVITY APP?

    History on the application of the activity can be deleted?

    Hello

    To delete all the app activity history (including outcomes), follow the steps below.

    Note that this process involves the permanent loss of any sensitive data on your iPhone and Apple Watch, including health data, data HomeKit and saved passwords.

    • Cancel the twinning of your watch to your iPhone using the Watch app (it also refreshes the backup from the night before):
      • On your iPhone, in the application of the watch, go to: My Watch (tab) > Apple Watch > press the 'i' icon next to your watch > désapparier Apple Watch.
    • Do a UNencrypted backup of your iPhone:
    • Erase content and settings on your iPhone:
      • iPhone: settings > general > reset > erase all content and settings.
    • Restore your iPhone to the unencrypted backup:
    • Pair your watch once again, by choosing to restore (backup restore) when offered the option then to implement:

  • How can I reset achievements in iPhone app of the activity?

    How can I reset achievements in iPhone app of the activity?

    After using the Apple Watch / activity app for a period of time.

    I realized that I set a goal of calories too high, hit it once as a

    stroke of luck when I was a logger for a day and received a

    Award of excellence in the application of activity based on the calorie goal.

    I will probably never exceed that burn calories again and as a result.

    win the prize of excellence are almost impossible.  I would like to

    Wipe all the rings of the activity of iPhone and delete all achievements

    rewards and start over.  How can I do?

    I have iPhone 6sPlus 128GB updated to current iOS

    Hello

    To reset all the history of activity (including outcomes) app, follow the steps below. Note that this process involves the permanent loss of any sensitive data on your iPhone and watch, including health data, data HomeKit and saved passwords.

    To change your objective of moving (it is best to do this, rather than all of the above):

    • Open the application of activity on your watch:
      • Tap on the complication of business cycles.
      • Or go the home screen (via a simple press on the digital Crown) and tap the app of the activity (coloured rings).
    • Of any where in the application of the activity, firmly press the screen > type on goal to move the change > choose a new goal by adjusting the target it.

  • Data on the lost health. Is there something I can do? I save, but I do not désapparier shows everything first.

    I upgraded to a new phone, but I do not désapparier shows everything first. So I had to reset the watch, but I lost all data on health. I always to the top of the old phone on the computer. I have it restore to new phone, but I had to reset the clock to fix it.  I can't do anything, but I wanted to check it out first.

    Apple: It's really too bad. I do understand the need to disable pairing before upgrading to the new phone users to watch!

    Is there something that can be made?

    Hello

    The issue is not that you neglected to désapparier your watch before moving on to a new iPhone. Your watch is saved on your iPhone automatically on an ongoing basis, including a refresh when unpairing via historical health approx. Data Watch is stored on your iPhone, not on your watch.

    In order to transfer historical data of health and activity of a new iPhone, it must be restored from a backup of your old iPhone. The whole process is detailed below. You say that you always have a backup of your old iPhone to your computer. If it is an encrypted backup, it will include your historical data on health. If is is not - and if the old iPhone has been deleted or you no longer have access to it - the data that is lost.

    • Cancel your watch to your old iPhone pairing using the Watch app (it also refreshes the backup from the night before):
      • iPhone: Watch app > Watch My > General > Apple Watch > désapparier Apple Watch.
    • Save your old iPhone via an encrypted method:
      • Via iCloud (encrypted as standard) or;
      • via iTunes on a computer - IMPORTANT: choose to "Encrypt iPhone backup", so that the backup contains sensitive data (including health and activity data, passwords, WiFi settings saved).
      • https://www.Apple.com/support/iPhone/backup/
    • Follow the steps recommended Apple to remove the personal information from your old iPhone (it is preferable to do so only after checking that all the data has been transferred successfully to your new iPhone and on your watch):
    • Restore your new iPhone from backup:
    • Pair and set up your watch:
      • Choose to restore the backup when offered the option during the eve. This will restore most of your data and settings, with a few exceptions (for example cards Pay Apple, access code).
      • Set up your Apple Watch - Apple Support

  • Still awaiting aid - blue file $Uninstall$

    This problem started the 25th with the inability to define the Access Manager which I am incapable of difficulty due to the problem of $ Windows folder blue $Uninstall - are both the current posts awaiting response. This problem becomes more serious day in this Access Manager cannot me open/answer to dated e-mail. It comes to J5 - please help as soon as possible. Thank you.

    You can cross this one off the list, I found the answer for my part, as follows:

    FYI: The file $ $Uninstall in the folder Windows is blue because they are compressed. These are backup files created by Software Distribution download MS Update, IE: Windows Update. These are backup files, it is the system to store safely away a copy (if it isn't, it will be as soon as you click 'delete' because he doesn't trust you know what you're doing). Because I have not confidence either, I first checked to make sure that the update files were in place in C:\Windows\ServicePackFiles.

    Your options for these files of $ $Backup are: they can be left alone if you have disk space or deleted safely if your system works as it should and you do not plan to give him its prior update status. After removal, they also have to be removed via Add/Remove programs where they appear as a Windows hotfix files. If you get an error just OK and press. Just make sure that you do not delete the file $ $ $hf_mig - it is necessary for future updates, or the C:\Windows\ServicePackFiles who caused this problem in the first place and would gladly do it again for you.

    The update put previous status of your system in these temporary backup files created also files with long names, made up of random letters and numbers. They can be removed safely so, possible any old files hotfix in Windows folder which have names like $NTUninstallKB123456$.

    I guess you could go to disk cleanup and let it do all this for you, but in this way, you'll learn at least something on Enemy Mine.

    Scate39

  • No space left on the partition SD card internal

    Hello

    After the last update (32.2.A.0.305) a couple of days for my Compact Z5, I noticed that the free space on the internal SD partition is almost out. I cleaned cache applications.

    I have not rooted the phone.
    I don't have that many apps installed, but still the storage/settings page look like this:

    In addition, solids Explorer application provides the following:

    So from what I see, I should have about 18 GB of free, but I have almost nothing.

    What's past and how to get back my space?

    Guys you saved me... I've been struggling with internal storage on my Z5c problems and it turns out that this Xperia backup takes place near 7.5 GB of internal space even thought that my backup was put on the sd card... Perhaps, it creates a temporary backup on the internal storage before copying to the final destination...

    While no case, no need for third-party tool erase it. Can be done via Apps I'm setting menu the process of the system see the and seek back and restore...

Maybe you are looking for