My administrator password stopped working on windows vista

Similar Questions

• At the opening of the various programs I get the error message 'extended attributes are incompatible' and "Consent UI has stopped working" in windows vista.

  Original title: extended attributes

  I started getting the following errors with various programs "extended attributes are incompatible" and "Consent UI has stopped working". I tried to do a system restore but get error inconsistent attributes for 'rstrui.exe '. I also had the message to ShellExecuteEX.exe when you try to install an application and even trying to download the Windows 7 Upgrade advisor. Just to check, I tried to run msconfig from the start and even gives me the message attributes. I am running Vista Home Premium with Service Pack 2 installed. Advice please. Thank you, Roger P

  Hi Roger P.

  ·         When the issue started?

  ·         Remember to make any hardware or software comes to the computer before this problem?

  ·         What antivirus application is installed on your computer?

  Method 1:

  You can try to run a SFC scan and check.

  This problem may occur if a system file is missing or damaged.

  You can refer to the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I suggest you to follow these steps and check if that helps.

  Methoad 2: try to run the windows recovery option system restore.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  It could be useful!

• SE error windows host process (Rundll32) has stopped working on Windows Vista

  Original title: (Rundll32)

  Need help fixing this problem microsoft windows popup message, process host windows (Rundll32) has stopped working.

  Hello

   
  1. When you get this error message?
  2. were there any changes (hardware or software) to the computer before the show?
  
  Start the computer in safe mode and check if the problem persists, if the question does not persist then perform the clean boot and check if the problem resolves.
  
  Step 1: safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.
   http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  
  Step 2: To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts
  
  Note: follow step 7 to reset the computer to start as usual after the boot process.
  
  http://support.Microsoft.com/kb/929135
  
  Hope this information helps.

• HIDData.exe has stopped working in Windows Vista SP2

  I am running Windows Vista w/SP2 on a Compaq CQ70 w/an Intel T3200 2.0 ghz processor. I recently installed a USB Bluetooth device. I get the error "HIDData.exe stopped working" reported before with a USB Bluetooth mouse. Every avenue, I used to try to find a solution show KB941600 cumulative update installation. However, when I started to install the update, I learned that it is applied to a different operating system than the one on my computer. I guess that's because it applies to Windows Vista without SP2 installed. Is there a way to solve this problem for the updated Vista version?

  Hi IXOYE4Us,

  This error may occur due to the old version of the HP Quick Launch Button software. If you have installed a HP Quick Launch toolbar, then you can try to disable the toolbar HP Quick launch at startup or uninstall it and check.

  You can try to perform a clean boot and try disabling the HP Quick launch at startup toolbar.

  For more information about execution of boot, you can consult the following link:

  http://support.Microsoft.com/kb/929135

  You can also view the following link to uninstall a program:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why has my Sibelius 6 suddenly stopped working on Windows Vista?

  It worked fine until a few weeks ago. Now, when I try to start Sibelius 6, I immediately get the message "Sibelius has stopped working - a problem caused blocking the program works properly...". Help! I have topped up Sibelius 6; My PC is not large enough to use Sibelius 7. I need it to work immediately; What can I do?

  You'll probably more relevant for Avid assistance.

  Try this first: http://avid.custkb.com/avid/app/selfservice/search.jsp?DocId=362261&ssdFilterCommunity15=1508&ssdFilterCommunity13=0&ssdFilterCommunity11=0&ssdFilterCommunity10=368&ssdFilter_SearchKeyWord=vista+stopped+working&page=1&ssdSearchOperator=0&ssdFilterCommunity3=0&Hilite=vista+stopped+working

• Windows live mail has stopped working on Windows Vista

  I try and open my windows live mail for my mail but it is said that it has stopped working and needs to close. What can I do to solve this problem.

  Submit all Live queries on the forum right here:

  Windows Live Solution Center
  http://windowslivehelp.com/

• Cipher.exe to overwrite the data deleted in Windows works with Windows Vista?

  Cipher.exe to overwrite the data deleted in Windows works with Windows Vista? He worked under Windows 2000, but not sure about Vista!  Otherwise Vista contains a command to clean free space HDD?

  Hello

  you need 3 of third party programs to clean free hard drive space

  For your question:

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

• How can I get the age of Mythology to work on Windows Vista, every time I put the disc in the computer installation screen dosnt pop up and nothing happens

  Moose title: How can I get the age of Mythology to work on windows vista

  every time I put the disc in the computer installation screen dosnt pop up and nothing happens the disc passes just for a bit and stops, and the cursor hangs a bit and I can't get the disk to the computer unless I restart the computer

  Hi rew55545,

  (1) is this problem limited only to the age of Mythology disc?

  (2) what version of the game you are trying to install?

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  
  Method 2: run the fixit available in the link below to resolve any problems with DVD player.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• TurboTax 2009 stopped working on my Vista 64-bit. I have

  TurboTax 2009 stopped working on my Vista 64-bit. I also can't open my ZoneAlarm, but it is in operation. I kept my OS updated on a monthly basis. I tried to TT2009 in safe mode but no help. Is there anything else I can try?

  Hi Ray Orlando,.

  1. you remember to make changes to the computer before this problem?

  2. you receive messages or error codes when you open ZoneAlarm?

  You can see the Turbo tax support links and check if it helps:

  https://TtlC.Intuit.com/post/show_full/bL1gSCN2mr36aBacfArNeq/keep-getting-em-TurboTax-em-2009-has-stopped-em-working-em-message?p=1&q=TurboTax+2009+stopped+working+on+Vista&s=0

  https://TtlC.Intuit.com/post/show_full/aAAbnk1Zur36a5abZe2aSc/how-to-avoid-the-em-TurboTax-EM-has-stopped-em-working-em-message?p=1&q=TurboTax+2009+stopped+working+on+Vista&s=2#

  Alternatively, you can try to reinstall the software TurboTax and check.

  Check out the link to uninstall a program:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can also get in touch with support TurboTax and check.

  Check the link for TurboxTax support:

  https://TtlC.Intuit.com/app/full_page

  You can also check in the observer of events for errors and information relating to what is causing the problems.

  Check out the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Skype has stopped working and windows is looking for a solution.

  original title: problem with Skype

  I have been using Skype on my laptop for 12 months with no problems, all of a sudden, I get a message that Skype has stopped working and windows is looking for a solution.  I checked my firewall, windows updates and downloaded Direct X, as suggested by Skype. I've uninstalled Skype and downloaded again to make sure that the version lasted. IHAVE had also my whole system recharged but it did not work. I am at a loss to know what to do next. Someone at - it ideas

  Hello
  
  It is a possibility that a third-party application is causing the conflict with Skype. We can perform the clean boot troubleshooting and check which program is causing the conflict.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• COM Surrogate has stopped working problem has caused the program to stop working and windows will close the program

  Impossible to uninstall anything without this message to come. solution is to download the micorsoft updates that are important and I did, and the message always appears

  http://www.howtogeek.com/HOWTO/Windows-Vista/fix-for-COM-surrogate-has-stopped-working-error-in-Vista/

  Read the info above relating to the resolution of this problem.

  See you soon.

  Mick Murphy - Microsoft partner

• I forgot the administrator password on my netbook windows 7 son´s

  I forgot the administrator password on my netbook windows 7 son´s. I can connect as long as him, but parental control is set so that it can not download anything without my password. I tried using Ophcrack, but it does not support windows 7. Does anyone have a suggestion?

  Thank you
  Emma

  Here are the usual methods to solve this problem:

  • Restart the computer with your CD to repair Windows, then use system restore to set Windows in a few days (only works if the problem occurred recently).
  • Logging in as a different admin account and then reset the password for your existing account (works only if create you an alternative admin account).
  • Log in as administrator mode without failure, then reset the password for your existing account (works only if you have activated the account administrator and know its password).
  • Insert your flash drive USB with the password key file (only works if you have created such a keyfile).
  • Check your paper files (works only if you threw down the password somewhere)

  Note also that you can lead to permanent damage to your registry files when you use crackers from third past.

  If you do not have a CD player, then you must burn a repair flash bootable disc. Here's how to make one:
  http://mintywhite.com/Windows-7/7maintenance/create-bootable-Windows-7-system-repair-USB-drive-netbooks/

• My DVD/CD drive has suddenly stopped working under Windows 7

  Ive been using Windows 7 for about 6 months now with on any trouble until recently my DVD drive has suddenly stopped working. Windows detects the drive but when I double click on it in my computer it says please insert disc. I find the drive in Device Manager and windows recognises that there is an error that says:

  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  I tried to uninstall the drivers in Manager device and rebooted the computer to let auto windows find the driver and reinstall it but to start, I get a message that says:

  Device not installed driver software

  I know that the drive is fine because it works fine in Ubuntu Linux system he worked great in windows 7, so stopped. any help would be greatly appreciated. Thank you.

  Go to the Web site of the factory, download the driver appropriate for your device. Uninstall the driver that is currently installed and uninstall the device in Device Manager. Reboot... After you restart, you have 1 of 2 options depending on how the software is packed from the manufacturing. (A) put an end to the automatic Windows installation feature and use the downloaded software to take care of it for you... If that's how it is set up to operate or (b) wait for windows to auto-trouvez and try to install the device, and when he asked the pilots to open and extract files downloaded to any location you choose and point the installer of windows in this direction.

  Jonathan Matthis aka "7test" on MSN QnA
  Chief Administrator of the Site
  Windows 7 QnA
  http://Windows 7qna.ning.com

• Game "Faery-Legends of Avalon"-"a problem caused the program to stop working correctly, Windows will close the program and notify you if a solution is available.

  I downloaded a game from microsoft called 'Faery-Legends of Avalon', I am currently running Windows 7 Professional. I can't play the game. The game turns on but when it gets to the part where you enter a character name, I get the answer that ' a problem due the program to stop working correctly, Windows go close the program and notify you if a solution is available. . Is this not compatible with windows 7 pro game. I just installed pro about a month ago and this is the first game that I downloaded from the installation.

  Moved from feedback

  Hello

  1. is this problem confined to this game here?

  2. have you checked if the computer meets the system requirements for the game?

  System minimum requirement for the game:

  * Operating system: Windows XP / Windows Vista / Windows 7

  * Processor: Intel Core 2 Duo E6600 2.4 GHz / AMD Athlon 64 X 2 Dual Core 5800 +.

  * Ram memory: 2 GB

  * Of hard disk space: 4.5 GB

  * Video: nVidia GeForce GT 140 / ATI Radeon HD 3870

  * Sound Card: DirectX Compatible

  * DirectX: 9

  * Keyboard / mouse

  If your computer meets the system requirements, then I suggest you to try the following methods and check if it helps.

  Method 1:

  Put the computer in a clean boot state, and then try to play the game and see if the problem still occurs.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 2:

  Run the scan tool (SFC) System File Checker and check if it helps.

  How to use the tool File Checker system to troubleshoot missing or corrupted on Windows 7 system files: http://support.microsoft.com/kb/929833

  Check the event viewer for the event logs for the exact error message and the cause of the problem. The event viewer will give you all the information about the cause of the problem.

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope the information is useful.

• Why Encore CS6 stop working on Windows 10?

  Why Encore CS6 stop working on Windows 10?

  The under minute closing acted a few start-up and operation of the type of MENU creation.

  The closure comes even after reinstallation of Premiere pro and more

  Thanks for making me part of your experiences and positive solutions.

  Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

  - so if you have an older program, update you to Windows 10 at YOUR risk of problems

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or to run it as Administrator http://forums.adobe.com/thread/969395 to assign permissions FULL said... yet, but it is sometimes necessary for Adobe programs