regarding my laptop display problem

Hello

my laptop model no HP ENVY6 1011TU. When I start my laptop I get with 4 screen, I reststart it several times again, it will not recovered.when I do it again and again and then I get with normal.plz tell me the solution

You have yet to explain what that "when I start my laptop I Get with 4 screen .

Are you trying to reset the computer to factory conditions and you have recovery discs?

Tags: HP Desktops

Similar Questions

  • 2000 HP laptop display problem

    I used this laptop for a couple of years without any problems.  Today when I turned it on, more than half of the screen was covered with a strange pattern of the intersection of the lines and the tasks.  It is a multiboot system, and the odd model covers the whole of the left side of the desktop on all operating systems, as well as the black splash screen and the configuration of the BIOS screen.  When I first started, under the overlay, I could barely do a message on a weak battery that will need to be replaced.  I don't know if these problems are related or not, but they both started at the same time.  Anyone know what could be the cause of the problem of display or how it can be fixed?  Apart from this, the computer always seems to work fine, but I need to reduce my window down, because I can use only less than half of the screen.  Thanks for all the ideas.

    Let me put it this way...
    Fact the broken screen your describing resemble one of the images on a google search?
    https://www.Google.com/search?q=broken+laptop+screen&BIW=1163&BiH=548&TBM=isch&TBO=u&source=Univ&SA=X&EI=qWpLVPuoGJL_yQTRxYLQBw&SQI=2&ved=0CCoQsAQ

    If so, this is caused from physical damage. It could be that something heavy was on it, but usually something he hit.
    A loose cable does not cause it. It's in an office or your home? Something is wrong of course.

    If you do it yourself, you're looking at anywhere from USD (approximately) according to part $50 à 75.

  • Laptop display problems

    I have an HP dv2854se laptop.  I had a problem with a screen that seems to get progressively worse.  No matter what I do it will start to have some diagonal and white lines.  If I move/wiggle the display a little it will make lines appear and the screen goes white and freezes.  If I plug in an external display both will function properly.  If I leave the connected external monitor and wiggle/move the screen of the computer, the computer screen freezes, but it still works fine on the external monitor.  I tried to update the drivers by removing the current driver and then let the computer find a new but it doesn't seem to help

    Contact the manufacturer of the laptop for warranty for your clearly defective hardware support.

  • Screen laptop display problem

    Hello

    HP G70 - portable 212EM

    Vista Home Premium

    No previous action held to cause this problem, as far as I am aware!

    Since this problem which manifests, I have updated all the drivers etc. such as recommended by the techcenter Web site.

    PROBLEM:

    The display screen has 4 or 5 horizontal lines at the top covering about 4 mm and the rest of the screen seems to be made up of thin horizontal lines, like the old television sets, used to have. In small print. (i.e. under the icons) are difficult to read; looks a bit like Hebrew writing!

    ADVOCACY:

    Help.

    Thanking you in advance,

    Sweetcorn024

    ERICO Sir,

    Thank you for your response.

    I however had the problem diagnosed as a defective screen unit, and he replaced this afternoon. Everything is now fine but my gratitude is yours.

    Best regards, Sweetcorn024

  • Laptop display problem.

    I have a Dell laptop running Windows XP.  This morning our cat sitting on the keyboard (the computer was on and hot, I guess).  When I he hunted, display has gone from landscape orientation portrait.  How do I go back?

    Hi Bob,

    The trick is to press the CTRL and ALT keys and then use part or all of the arrows (do not just once, keep pushing different or even several times) until it is as you wish. Normally, the only one to use is the arrow upwards, but I found it does not always work and you may need to waste his time. Don't forget to press the keys until the screen (not just click and instantly let go, or he can't have time to recognize the command).

    Good luck!

    Kosh

  • Pavilion DV6000: Laptop display problem

    My laptop screen works not all Idiea before you take it to the store

    Model FF513EA number

    problem map graphic and plastic cable wire which connect it, technician fixed it finally.

    anyway thanks for the help.

  • HP computer laptop-15-be002tu: display in a new laptop screen problem

    Dear friends,

    I bought a new laptop from hp [hp-15-be002tu]. It is provided with the operating system of back free v.2.

    When I tried to start my laptop by pressing power button there is no display on the screen. But I waited for 5 minutes. The HDD & dvd player work properly.

    But I noticed screen does not work. How can I solve my problem?

    Please give good soggestions to fix my problem

    Thank you all

    Dear friends,

    My display problem has been resolved.                                                                                                                                                                         An HP service technician visited my house [on-site warranty] and inspected my computer hp laptop and found that a video cable from the lcd screen was not correctly set. This is why there is no display on the screen of my computer hp laptop.

    I asked him why he came... It is due to either by transportation [services of e-mail... etc.] or manufacturing unit.

    In any case, my problem has been resolved.

    Thanks for the HP amicable services team

    M.Ganesh kumar

  • Redirect the problem - computer laptop display tablet version instead of the version of office

    Hello

    I'm having a problem with the wrong version of my site displaying on some devices.  Specifically, the version of the Tablet displays on some laptops instead of the desktop version.  Here's what I observed:

    • Sony Vaio 14 "laptop incorrectly displays the version of the tablet in IE and Edge (Windows 10).  It should display the desktop version.  Screen resolution is 1600 x 900.
    • Computer 14 "Dell laptop displays the desktop version properly in Chrome, IE, and Edge (Windows 10). Screen resolution is 1600 x 900
    • MacBook 13 " correctly displays the desktop Chrome and Safari version.
    • iPhone correctly displays the version of the phone.
    • iPad & iPad Mini display correctly version of the tablet.

    Why Sony Vaio did not display the correct version?

    I use the latest version of Muse 2015.0 and downloaded all files when publishing.

    My site is www.johnblaustein.com

    Thanks for any help here.

    John

    The Sony Vaio is a hybrid between ultabook and what they call the other rank.

    + It has a good processor and cheep

    -goes flat batty after 2 hours, the keyboard is too small to be useful, and the touchscreen is the lowest bidder... I guess that is why WX called a Tablet

  • Tecra A3X - Intermittent display problem

    I have several of this A3X laptop computer, with build different versions, but the latest display drivers. Probably bought at the same time.

    It is an intermittent fault which has no template. Users encounter while using, so that the graphics appear goes and they are presented with a screen, can be either white, green, blue or purple.

    The only way to resolve is hard boot the PC with on/off switch.

    I plugged an external display while he did and the graphics appear ok on an external monitor. Is there a flaw known with graphics display on of the A3X?

    I contacted Toshiba, who advised the re-boot, which suits him.

    Updated the display driver graphic for the last patch, fault still occurs.
    Cell phone everything rebuilt, fault still occurs.
    Check all connections in the laptop display, re-sitting all connectors, down again.

    Can anyone tell what to try next?

    If the default does not appear on the external screen then either it's a faulty inverter FL or bad display itself.
    Presumably why this happens, but in my opinion, it is meaningless because first it will not help to solve this problem and then the laptop parts are always stressed and these defects occur simply.

    What to do do so only one real solution. The parts must be replaced or repaired.
    I guess that the technicians don t fix devices individual but replace it with a new one.

    Speak, the least reflection. you simply contact the ASP in your country for the control and the fix.
    If the warranty is valid, everything must be done for free!

    Best regards and good luck

  • W510 display problem

    Hi guys, I just bought a W510 and found a display problem when using the battery.

    The display will sometimes dim when using battery power following in the Manager of power Plans:

    • Video playback
    • Maximum battery life
    • Timers (presentation)
    • Optimized power source
    • Energy Star

    This means that, except for the power Plan maximum Performance, the problem exists in all levels of power.

    I post 2 pictures here to make it clear:

    Nomal display

    Display Dim

    Is there someone who has the same problem?

    How does this happen and how to fix it? Thank you!

    Kind regards!

    People call it the problem of 'pixel offset.  See here:

    http://forums.Lenovo.com/T5/W-series-ThinkPad-Laptops/W510-checkered-pixel-patterns-while-running-on...

  • Black screen / display problems

    I have a MBPR13"(early 2015) which I think has integrated graphics intel 6100.

    I've been running windows via bootcamp on the mac since I bought it, first with win8.1 and for a year or two, win10. A couple of weeks, however, windows crashed and wouldn't start. I can boot into safe mode after 3 failed attempts at normal mode, but I couldn't diagnose the problem. I took the opportunity to carry out a complete new installation of OSX and Windows 10.

    However, while OSX continues to work very well, Windows 10 still will not work. It installs successfully, and then gets to the point where the wizard Bootcamp installs all the drivers - it seems to be ok until that display then goes off - I guess that's the point where the display drivers are installed. Windows is still underway, but all I get is a white screen.

    After much mucking to plug and unplug the screens I can sometimes get an image on an external monitor or on the built-in screen. The computer screen does not fill the screen (bottom 25% of the screen remains empty) and windows cannot detect both screens at the same time. In any case, in a few seconds to lift an image on the screen, windows crashes and restarts.

    I suspect that it is a driver problem, probably related to a recent windows update - note my new installation is based on the current windows (as of today ' hui) 10 ISO download available from microsoft, so I guess this includes all applicable updates and I have no way to drive to a previous version.

    Can someone from apple what comments can you do on this point, hopefully identify that it's just a driver problem and update the bootcamp windows software support for my MBP so I can get Windows successfully facing up and running? Otherwise, any other suggestions on a fix?

    Thanks in advance

    Mike

    Updated - uninstall the display driver Intel 6100 temporarily solves the problem (of a point - the works of laptop display once again, but of course without hardware acceleration or connectivity external monitor), although 10 windows automatically reinstalls the drivers a few seconds later, resulting in the return of the issue.

    I was able to continue to use the laptop only by disabling the graphics card. However this clearly is not a solution, but simply points to the fact that the display driver is the issue.

    Everything apple comments? Surely, this affects a lot of users and not just me? Is an update to the driver on the way?

  • Mac book air display problem

    having display problems with my macbook air, first version of 2015. When I turn on my macbook, after entering the password and pressing on enter three lines (not really lines they look more like lightning, appear from the top of the screen) in the colors Blue, green and red.

    also when I turn off my laptop just until the display on the top of the screen this thick green line 3 inch appears and goes about a second or 2.

    help someone?

    Thank you

    Try a reset of the NVRAM:

    https://support.Apple.com/en-us/HT204063

    If no success, take a picture of the problem.  Make an appointment at an Apple store genius bar for a free evaluation.  If necessary, show the technician, an image of the screen.

    Ciao.

  • having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in

    having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in the colors Blue, green and red.

    also when I turn off my laptop just until the display on the top of the screen that is 2 and a half inch thick green line appears and goes about a second.

    help someone?

    Thank you

    Howdy Yaser of zoysia,

    It seems that your screen displays some graphical anomalies when you connect to your user name. I would use these troubleshooting steps in the following article on the resolution of screens:

    Restart your Mac in safe mode to reset the default display resolution.

    If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

    From: get help with graphics issues on external displays connected to your Mac.

    Thank you for using communities of Apple Support.

  • Tecra S1 display problem

    Unfortnately my tecra s1 hit the table of coffee on the ground, the screen immediately turned white. When I rebooted there was no display at all (black only)
    The computer works as I plugged on a screen external and that was very good. I tried to follow various troubleshooting guides online showing how to disassemble the laptop and reinstall the connector of the display on the motherboard, but this did not remedy the problem.

    I noticed coming from the display was a big bunch of wires going into a connector that I reinstalled, on the right hand side of the screen is a white and black wire to a connector and a pink wire that seemed to just float, I couldn't not whence he came. Does anyone have ideas on the subject of this thread or other tips that can help me.

    Thanks in advance

    Hello

    Unfortunately, mate, you won't find any manual disassembly here on the pages of Toshiba. These manuals are not for use public and designed only for the FSA.
    But I think you could google a bit and you should find a few details.

    I think that it is a display problem that I doubt that some loose cables could cause this problem
    In my view, the screen is broken and needs to be replaced
    To do this, you should get in touch with your technician ASP.

    Good luck

  • The satellite M60 display problems

    Hello

    I bought a satellite M60 a month ago, and since then, I've been strugling trying to solve a problem that has to do with the display (ATI 700 X mobility).
    When I play some games (the dawn of war, Unreal tournament...) the computer freezes completely, I actually have to force stop it to restart.
    Another problem, that I have seen is with Mixmeister Pro 6, the video playback is erratic, it is as if the computer is unable to handle any overload.

    I tried the upgrade of drivers, nothing works, then I installed the third party Omega drivers, but once again, nothing to do.

    Since the purchase of the M60, I had to correct problems of Wirless and PCMCIA card through driver updates, but there is nothing that I'm be able to do to resolve this display problem.

    I am quite convinced it's a driver issue, but then again, nothing is certain.

    If anyone can help me please I'm getting desperate.

    Hello

    Well, it's not easy to say why it happens but one of my friends has sometimes even appearance but on another unit. If he plays a high-performance games unity cling.
    In my view, this could be a heating problem. Playing games is hard work for the laptop, because all parts (bars of memory, processor, graphics card, etc.) work with max performance and produce a lot of heat. Most laptops are not developed for this.

    However, you should always use the graphics driver from Toshiba. I found the latest version of 15/07/05. It is a display 8.121.050.322A driver. In addition, you must install latest DirectX. I think that it s a 9.1. Check whether the fixes for these games are available.

    Second, if video playback is erratic, it seems that the OS is fully committed.
    In this case, you should check the processes that run in the background of the operating system.
    In addition, try to defragment the HARD disk

    Good bye

Maybe you are looking for

  • Help to reinstall Battlefield 1942

    When trying to reinstall battlefield 1942: the complete collection. first installed on "E:\. ». He sees a player who no longer exists. I deleted my temporary files and am now lost. any help would be appreciated. Battlefield 1942: the complete collect

  • Microsoft Golf

    I have a 2001 version of the Microsoft Golf, but he refuses to install... This version is not compatible with Windows 7... ?

  • Error while starting the system

    When starting my computer, I get an error message indicating that "there was a problem starting c:\users\mom's\appdata\local\apple\adobe\kdvnwfsf.dll' What's this and should I be worried?

  • BlackBerry Smartphones looking for info on Blackberry Curve 8330

    Hello I'm new here, but I have a question. I am seriously interested in the upgrade of the my LG enV phone a Blackberry Curve 8330. My quesiton is, is it true that you can not use the phone for calls, surf the web or by e-mail while he's in charge? O

  • Mobility of Bell of Smartphones from blackBerry OS for the 8330

    Does anyone know if Bell will offer an upgrade to their current OS for the 8330? V4.5.0.127 IE 5.0 + or? Thank you Dennis BB8330 with 2 years contract