Regarding the count (*) while using with the table alias

Similar Questions

• Error when try to use the rowid with the table alias

  I tried using a table alias to test the functions of Manager of rules and met the following problems.
  
  1. I have clone from a schema HR employees and departments tables.
  
  2. create data as follows:
  
  BEGIN
  dbms_rlmgr.create_event_struct (data = > 't_a');
  dbms_rlmgr.add_elementary_attribute (data = > 't_a',)
  attr_name = > "a_employees"
  tab_alias = > exf$ table_alias ('employees'));
  dbms_rlmgr.add_elementary_attribute (data = > 't_a',)
  attr_name = > "a_departments"
  tab_alias = > exf$ table_alias ('departments'));
  END;
  
  3. create the class rule as follows:
  
  BEGIN
  dbms_rlmgr.create_rule_class (rule_class = > 't_as',)
  Event_Struct = > 't_a. "
  action_cbk = > 't_acb ',.
  rslt_viewnm = > 't_arv');
  END;
  
  4. After adding a rule to the rule class, I try to test as follows
  
  DECLARE
  r_emp ROWID.
  r_dept ROWID.
  CURSOR a_cur IS
  SELECT emp. ROWID, Dept. ROWID
  Employees OF ministries dept (IEM),
  WHERE emp.department_id = dept.department_id;
  I have NUMBER: = 1;
  BEGIN
  OPEN a_cur;
  LOOP
  EXTRACTION a_cur
  IN r_emp, r_dept;
  EXIT WHEN a_cur % NOTFOUND;
  dbms_output.put_line (i);
  i: = i + 1;
  dbms_output.put_line (r_emp);
  dbms_rlmgr.add_event (rule_class = > 't_alia',)
  event_inst = > r_emp,
  event_type = > 'employees');
  dbms_rlmgr.add_event (rule_class = > 't_alia',)
  event_inst = > r_dept,
  event_type = > "departments");
  END LOOP;
  END;
  
  But I got the following error
  
  SQL > DECLARE
  2 r_emp ROWID.
  3 r_dept ROWID.
  4 a_cur CURSOR IS
  5. SELECT emp. ROWID, Dept. ROWID
  6 employees OF ministries dept (IEM),
  7 WHERE emp.department_id = dept.department_id;
  8 I COMP: = 1;
  BEGIN 9
  10 a_cur OPEN;
  11 LOOP
  12 FETCH a_cur
  13. IN r_emp, r_dept;
  EXIT 14 WHEN a_cur % NOTFOUND;
  15 dbms_output.put_line (i);
  16 I: = i + 1;
  17 dbms_output.put_line (r_emp);
  18 dbms_rlmgr.add_event (rule_class = > 't_alia',)
  19 event_inst = > r_emp,
  20 event_type = > 'employees');
  21 dbms_rlmgr.add_event (rule_class = > 't_alia',)
  22 event_inst = > r_dept,
  23 event_type = > "departments");
  24 END LOOP;
  25 END;
  26.
  DECLARE
  *
  ERROR on line 1:
  ORA-06550: line 1, column 36:
  PLS-00201: identifier 'AAAVN9AAEAAAQH8AAA' must be declared.
  ORA-06550: line 1, column 7:
  PL/SQL: Statement ignored
  ORA-06512: at "EXFSYS. DBMS_RLMGR', line 974
  ORA-06512: at line 18 level

  Hello

  ROWID for individual tables can be added as events only if the rule class is set up as a Composite. For all other cases, ROWID is treated as data and they need to be formatted as a string of instances of AnyData or name-value pairs. Your script is to think that you intend to create a composite rule class while you might add ROWID individually. If please, recreate the rule as a composite class and try again. The error message you received is incorrect and has been corrected to indicate that the error is with the format data point past.

  Hope this helps,
  -Aravind.

• No limitation regarding the table of bitmaps?

  I'm working on a game. Previously, I had 13 executives of sprite as separate files and used getBitmapResource to load into an array of bitmaps. It worked well.

  I've upped the number of sprite images to 26 and make them in a single bitmap file with 2 rows of 13 (corresponding to the States of game). I'm trying to load them into an array of Bitmaps - either one or two dimensions. None worked. The last loaded image is one that is displayed, regardless of what I call for. I use Bitmap.scaleInto, in OS5.

  My attempts at debugging continue to wonder if I'm violating a rule, with the berries of the Bitmap. Like, the berries can only work before because of the structure of the .png files? Bitmaps are already in an internal table format that blends in with my paintings?

  I can also have incorrectly implemented the scaleInto, although I'm working with the code for a very good post on this forum. Here is that code, currently configured to use a single dimension table. There are a few more from the referenced post lines, to maintain transparency in the sprite frames.

  class Thing extends OBJ
  {
   static Bitmap[] _mySprite; 
  
   Thing(int passX, int passY)
     {
      super(passX, passY);
  
      // Set bitmaps
  
      Bitmap multi_sprite = Bitmap.getBitmapResource("sprite_64x29.png");
      _mySprite = new Bitmap[26];
  
      Bitmap image = new Bitmap(Bitmap.ROWWISE_16BIT_COLOR, 64, 29);
      image.createAlpha(Bitmap.ALPHA_BITDEPTH_8BPP);
      for (int y = 0; y < 2; y++) {
          for (int x = 0; x < 13; x++) {
              int[] transparentImage = new int[64 * 29];
              image.setARGB(transparentImage, 0, 64, 0, 0, 64, 29);            multi_sprite.scaleInto(x*64, y*29, 64, 29, image, 0, 0, 64, 29, Bitmap.FILTER_LANCZOS);           _mySprite[x+13*y] = image;
             }
         }...
  

  Transparency works. And, if I shorten the loop values, the last loaded picture appears, regardless of what image I try to get out of the table.

  I know that I could skip the drawBitmap preload and only when needed. But I have a lot of code in place that expects to be able to check the dimensions of several bitmaps, in addition to these. And it seems just cleaner to shorten them.

  you re-use the image object, most likely, you end up with a table of the same objects (a table only refers to the object, it does not copy it).

• loop for and while loop with empty table entry

  Hello

  I have a question with loop and loop.

  When a constant empty array (zero element) is connected to the loop For with "allowing the index", there are no interactions performed in loop For. But, if the loop is replaced by any loop, no problem.

  LabVIEW 2010

  Hello

  It is ok. I have no problem at all.

  For the 'loop' For when you connect the table thanks to indexing, the number of iterations is set to the size of the array. The iteration number assigned to N (in your case 10) is ignored.

  For the 'While' loop the number of iteration is defined by the Boolean Condition and the size of the array is ignored.

  Paul

• Copy the Table Alias for a database of the ASO

  Hi all
  
  I use the Essbase Version 11.1.2.0.
  
  Is it possible to copy an alias of an ASO cube table to another table aliases of the same cube with MAXL?
  
  
  I know how to do it with EAS, but I don't know how to do with MAXL.
  
  
  
  I already tried this-> edit the 'HR_SB' object.' HR_REP'. ' Default 'type table_alias copy to 'HR_SB'.' HR_REP'. 'Alias_HFM'
  
  This copies the ALT file in the directory "applicationname\database". After that, you need to import this file in the database. It's easy to do in the admin console but I am facing some problems with maxl.
  
  I used the command:
  change the database 'HR_SB'.' HR_REP' 'Alias_HFM' of charge of data_file ***\\HR_SB\\HR_REP\\HFM.alt table_alias
  
  I get the error message: / * Alias [Alias_HFM] already exists for the HR_REP database * /.
  
  So I tried to unload the table before loading:
  
  change the database 'HR_SB'.' HR_REP' 'Alias_HFM' of unloading table_alias
  
  -> error message: / * dynamic aliases drop table is not supported in page outline mode * /.
  
  I have no idea what it means - any ideas?
  
  Perhaps it does not work for ASO cubes?
  
  
  Thank you, Bernd

  Try this after copying table alias

  change dabase 'HR_SB'.' HR_REP' table active alias 'Alias_HFM '.

• Report and the Tables Alias scripts

  Hi all

  I am running a report off MaxL Script and want to get the Alias. I use < REPALIASMBR 'Products' and it works very well. However, it is bring back the default Alias of Table. Is it possible that I can choose what Table Alias that is returned in the result?

  Thank you!

  Brandy

  Yes, watch OUTALTSELECT

• How to import the table alias in the planning

  Hi friends
  
  How do I import table alias in the planning (V9.3.3), we need to add an alias for all our members of the account dimension, what is the best way to do it?
  
  Thanks to you all

  Create a new table alias in the planning, and then to use HAL to charge members of the alias.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Update the table alias errors

  Hello
  
  I'm trying to update a table alias using the rules file. I'm trying to update members of multiple dimensions in a single file of simple rules. the structure of the column is as below:
  
  
  (Dim1, Lev 0) (Alias) (Dim2, Lev 0) (Alias) (Dim3, Lev 0) (Alias)
  
  But the rules file above fails in column 3. It says "failed to validate \\column 3. Can you please help?
  
  Thank you!

  Hello

  Have you read this post? Update alias
  I know it's you that triggered it, but does he not answered the question?

  Level0, ALIAS0 Dim1, Dim1, Dim2 ALIAS0, Dim2 Level0, Dim3 ALIAS0, Dim3, Level0
  must check if each of the dimensions is defined as a type of build level

  You can quickly test it by creating a file by saying the following.
  dim1val, dim1alias, dim2val, dim2alias, dim3val, dim3alias

  Create a new rule to load.
  Assign the construction of the dimension.
  Open the text file
  Set the properties of each column as
  Level0, ALIAS0 Dim1, Dim1, Dim2 ALIAS0, Dim2 Level0, Dim3 ALIAS0, Dim3, Level0
  set the dimension build properties dim1, dim2 and dim3 as the type of build level.
  validate

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• regarding the tables

  Hi friends,
  
  I use oracle 10.2.0.3
  
  I have a table partitioned, named cmp_event_history. On this table, I created rang partition on a weekly basis. The name of the default partition is event_others. This week, I forgot to create a new partition. If data todays has been inserted in the event_others partition.
  
  My question is if I use the sub query, it will cause no problems because the data is already present on this partition event_others.
  

  alter table CMP_EVENT_HISTORY split partition EVENT_OTHERS at (to_date('09/06/2013 00:00:00','dd/mm/yyyy hh24:mi:ss')) into (partition EVENT_June2013_01to08,partition EVENT_OTHERS) update global indexes;

  I use oracle 10.2.0.3

  I have a table partitioned, named cmp_event_history. On this table, I created rang partition on a weekly basis. The name of the default partition is event_others. This week, I forgot to create a new partition. If data todays has been inserted in the event_others partition.

  My question is if I use the sub query, it will cause no problems because the data is already present on this partition event_others.

  ALTER table CMP_EVENT_HISTORY split partition EVENT_OTHERS at (to_date (September 6, 2013 00:00:00 ',' dd/mm/yyyy hh24:mi:ss')) index global update (partition EVENT_June2013_01to08, partition EVENT_OTHERS);))

  What is the partition type you use?

  Please see the doc PDF attached to (database using partitioning with Oracle E-Business Suite [554539.1 ID]) for the alter command that you can use.

  Thank you
  Hussein

• Stop a while loop with outdoor table

  Hello

  I have a problem to stop the execution of a vi that uses a while loop and outside a table with two values of time intervals. I would like to stop the VI when the different values of the array are passed. I have attached here the code if you want to help me please, thank you in advance.

  
  

• DPP while using with ten Windows flaws. Is this a problem with Canon?

  If I convert my T2i images or T6i I have this error message.  I could follow fault message waiting and return to use.  The last two days, he just won't answer after opening.  Anyone with problems of this kind?  No matter what I do it is the same response from the supplied Canon software is provided with each camera.  Any help would be greatly appreciated.  All downloads that would solve my problem would be great as well!  I found none so far.

  You must follow John's advice and install the latest version of the software, which is available on the link he posted.

• Error log can be used with multi table insert?

  I mean I want to insert into multiple tables and errors in the log for each table. Would this be possible?

  I tried something like below:

  in zzz_party)

  name,

  party_type,

  domicile_ctry_id

  ) (the values

  case

  Where rn = null then 14

  other name

  end,

  party_type,

  domicile_ctry_id

  ) Journal of log errors in zzz_err_party ("INS1")

  reject limit unlimited

  in zzz_party2)

  name,

  party_type,

  domicile_ctry_id

  ) (the values

  name,

  case

  Where rn = null then 14

  of other party_type

  end,

  domicile_ctry_id

  )

  Error log of journal zzz_err_party2 ("INS1")

  reject limit unlimited

  Select name, legal_name.

  case

  Where rownum = null then 14

  of other party_type

  end

  -t.domicile_ctry_id, rownum rn

  advantage t

  WHERE name like 'A %' and rownum < = 100

  ;

  And it does not work.

  Is there a way to do what I thought without having a separate select insert for each table with its own errors in the log?

  Whenever you have an error message the complete error message. "It doesn't work" is not an error message that others can understand.

  Looking in your statement, there are some flaws of syntax. I have fixed the. Try this

  insert all
  into zzz_party
  (
    name
  , party_type
  , domicile_ctry_id
  )
  values
  (
    case when rn=14 then  null else  name end
  , party_type
  , domicile_ctry_id
  )
  log errors into zzz_err_party ('ins1') reject limit unlimited
  into zzz_party2
  (
    name
  , party_type
  , domicile_ctry_id
  )
  values
  (
    name
  , case when rn=14 then null else party_type end
  , domicile_ctry_id
  )
  log errors into zzz_err_party2 ('ins1') reject limit unlimited
  select name
       , legal_name
       , case when rownum=14 then null else party_type end party_type
       , t.domicile_ctry_id
       , rownum rn
    from party t
   where name like 'A%'
     and rownum<=100;
  

• My sony xperia l disconnect internet automatically while using with hot spot

  I m using sony xperia l c2104 I m using 3g connection to connect to the internet every time, I m using my phone as a hotspot and try to access some heavy websites like site, my automatically disconnected internet yahoo Web site and will not work until I restart my hotspot if someone can help me with this problem.

  Sony laptop has a distinct community which can be found here.

• SmartView 11.1.2.1.103 make the selection of table alias "sticky."

  Apparently (but it is difficult to imagine) the alias table selection is not sticky. The default value appears in the 'Default' alias at least on ad-hoc connections table. It the sticky option is the best case scenario but assuming that there is no is it possible to 'None' by default? I can't use a macro approach and I can't delete the table alias alias 'default' due to the impact on the planning and the EN
  
  Thank you

  You attempted to set the table level alias connection by right-clicking on the private connection and selecting the menu "Set alias table"?

• Change the name of the table/view to RPD.

  Hello
  
  I have a domain which has two points of view in it. The joints are given and have the subject area in the presentation layer. I created a few reports and they work fine. Now, we want to change the name of the views and do not want in the database. I changed the names in the presentation layer. I ran the created reports and they work fine. I have approach the right way? Did I modify them elsewhere? I don't want my reports to be affected in any way with the change of the view names. Please advice.

  Hello
  When you change the name of table or a view in the presentation layer of the RPD, it will create aliases for that name .you may notice to double-click on the name of the table, alias tab

  If you remove that alias name the report will be the effect on best practice is that do not delete aliases for name reports was changed from RPD table

  the same scenario will apply for object zone rename also

  Thank you
  Saichand.v