Regd - new import statement added question here

Similar Questions

• I installed lightroom on a new computer (windows 10) cc. I copied all of my original photos on a hard drive and them imported by adding them on the new computer using the import function. I have a catalog update saved on thehard d

  I installed lightroom on a new computer (windows 10) cc. I copied all of my original photos on a hard drive and them imported by adding them on the new computer using the import function. I have a catalog to date backed on thehard drive and have tried to insert into the new folder to lightroom. Unfortunately none of my changes, collections etc. seem to be present on the new computer. I still work lightroom with any changes on the old computer where all the photos. Help

  He seemed to have solved this problem - the catalogue of the old computer has been saved as a zip file. Once extracted, it could be used as the primary catalog for lightroom on the new computer

• 48 new important updates after you apply the language pack

  Original title: Windows 8 updates after you have applied the language pack

  Hi all

  I bought the laptop with the English version of Windows 8 in 2013 and a few days ago decided to change the default language to Spanish.

  Language Pack has been successfully installed. But when I checked for Windows 8 updates available (I subscribe) I have seen that it is necessary to install 48 new important updates.

  Regularly, I installed all necessary updates. And now, after you apply the language pack, I have to repeat all the facilities of updates once more to be up-to-date and continue with Spanish? Or I missed something during the installation of the language pack?

  Thanks much for the advice.

  Kind regards

  Sergei Sumskoy

  Hi Sergey,

  We will first check if the 48 new important updates are already installed on the computer or not.

  To view your history of update

  1. Open Windows Update by sliding into the right edge of the screen and click on settings.
  2. Click change PC settings, and click then on update and recovery.
  3. Click view update history.

  Method 1:
  If the important updates are already installed on the computer, you can install all important updates available.

  Method 2:
  If all updates are already installed on the computer, you can reset the Windows Update components and check if there are new updates available.
  How to reset the Windows Update components?

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the the Microsoft Knowledge Base:

  See the article for more information.

  Add a language or keyboard

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Hi - I've never asked a question here - forgive me if I am doing it wrong.  I am trying to add a digital signature field in Acrobat DC, so it can be signed to the reader by someone other than me. (A digital not the type that will attract the DC for you or

  Hi - I've never asked a question here - forgive me if I am doing it wrong. I am trying to add a digital signature field in Acrobat DC, so it can be signed to the reader by someone other than me. (A digital step type that DC will draw to you or allow you to draw yourself.) I can do the fields but they do not work. The signature fields used to have little flags in the corner of the box that indicates that they were ready to be signed. My steps consist of:

  Select Tools - prepare forms. I click on the "this document requires signature. Automatic detection is on.

  Next, I check the automatically created fields. I tried to just change the properties of the signature signature box and I also tried drawing signature block or a right signature (not sure what the difference is) , I noticed that under "More" there «return it to the form acrobat.» When I do I get the message that "Acrobat will now NEA Acroform - click ok to continue"-I made and save - can I save again with the new name of 'Save as another' to activate the form. So I check the form in Reader, but it does not work! What I am doing wrong? I used to be able to do that!  I tried other ways, but DC wants me to a digital signature for me (I already have one!) Help please!

  In Acrobat, you can add a signature field to the form:

  

• New import D810 problem

  Help, please? Cannot import images of the new Nikon D810, cf card, in Lightroom v4.4.  With the help of Nikon cord UPC in all ports of upc on computer (windows 7). Thumbnails appear but when importing, get the message "files are not recognized by the raw format support in Lightroom."  I uninstalled the old ViewNX2 and installed new ViewNX2 provided with D810.  Also downloaded and installed the most recent Adobe DNG converter (8.7.0.309).  Device (D810) is detected by ViewNX2 but thumbnails to choose and transfer (import) do not appear. Clicking the device button results in nothing but 'turning off' the D810.  Unable to get images on the hard disk to convert to DNG and import into Lightroom.  I would prefer to just use Lightroom, because it is 2 less programs for trashing me in.  Help, please!?

  There was no use of the word "import" in my question.

  I ask you if you can COPY photos on your hard drive, using any means of OS you want, copy and paste, or drag and drop, or whatever. This is not an 'import '.

  The camera (assuming that it is connected to the computer and turned on) should appear when you double click on 'Computer' in Windows 7, just like any other disk. Then, you perform the copy.

  If you can do that, we're almost done.

• MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on ex

  MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on external hard drives). Thanks for your suggestions.

  You will not lose anything, but the app if you uninstall. If you decide to uninstall use this app to make sure that all the other files which depends on FCE are also deleted however I can't give you any assurance as to whether you will be able to reinstall so that it works correctly. It is a software that has not been supported for almost 5 years and there are conflicting reports as to its compatibility with OS X 10.11. Can't I test it myself.

  Maybe someone else will chime in with their own experiences.

  Russ

• 2 questions here please: during the unlocking process: it says that I need to erase everything on my iphone. So, what of my contacts? How can I get that back?

  2 the questions here please:

  During the unlocking process: it says that I need to erase everything on my iPhone 5 s. So, what of my contacts? How can I get that back? because the backup to icloud it nor iTunes.

  In addition, what happens if I do not erase the content? That will prevent my form of phone is unlocked?

  Thank you very much

  RAJS

  Do not erase everything on your phone under the procedure of release.  If you have your phone set to backup Contacts on iCloud, they will be saved and then can be later reloaded on your phone after erasing it.  I just got two iPhone 5 and it worked well.  Also to do a full backup to your computer via iTunes and transfer everything what is not already saved if you are asked.  The only problem I encountered was that some applications does not and I had to manually reinstall the.

• Hello I have seen a few question here with my apple ID and email I am no longer using and I only remember the security answer, why did you guys all of a sudden to block my ife apple

  Dear Apple

  I face a big question here what my Apple ID ***@hotmail.com, a few days ago, you guys suddenly refuse my login and ask me to reset my password, the MAN I NICU is more than e-mail. How I'm going to reset it ok fine after seeing the mention to keep security response ok one of them are wrong! WTH my first car honda Jazz I confirms is correct, but the pets, I'm not sure! Please help me to reset for me

  It's a very bad idea to post your email/ID address and asked guests to remove it.

  This is a user to user forum: you're not talking about Apple here. Go to https://getsupport.apple.com . Click on "see all of the products and services ', then 'More', then 'Apple ID', then 'other Apple ID subjects' then 'security issues forgotten Apple ID". If you have problems with this test of this form: https://www.apple.com/emea/support/itunes/contact.html

• ICB .uir Table, how auto scroll as new lines are added?

  Code CVI

  InsertTableRows (PanelHandle, ControlID,-1, 1, VAL_CELL_STRING);
  SetTableCellVal ( , );

  Once the new lines are added above the bottom, it does not automatically scroll down to see new entries as a text box.  I saw an example of forcing a ListBox control to the value of the index of control to the most recent entry, but I can't find a corresponding function for the Table.

  Thanks for your help.

  Probably the SetActiveTableCell call may do the trick. You can retrieve the number of rows in the GetNumTableRowstable.

• New import feature is shitty and any new version of LR crashes whenever I open it

  I guess that's the ONLY way to Adobe.   So, if this is the case... the new import System... SUCKS Big time.  It takes three or four different attempts to reach the file appropriate to your player to get my uploaded images.  Please go back to the easy way to sellct where my images.

  This latest version of LR crashes whenever I open it.  Don't know what the problem is but FIX IT!

  Hi RDPhotography,

  Apologies for the inconvenience.

  As mentioned by Keith, yes we are aware of the current issues with the last update of Lightroom and are currently working on this issue.

  For now, I suggest you follow the steps below:

  • Go to the Lightroom preferences > General > uncheck 'show add photos screen '.
  • Lightroom preferences > Performance > uncheck "use the graphics processor.
  • Restart Lightroom, and check if you are able to import
  • If the steps above do not help, then roll back to the last version and refer to this article for the same thing: https://helpx.adobe.com/lightroom/kb/roll-back-to-prior-update.html

• new import in lightroom

  Announcing Adobe folks. I know you all work hard and try the best - like us all. For now, the new import in Lightroom is not enough work for the better is it?

  Please, please give us back the old and I would say much better import in the previus version.

  Thanks for listening

  Phillip

  Hi philslide,

  I understand your concern, and the engineering team working on the priority to the difficulty of this.

  There will be a next update of Lightroom that should solve all these problems.

  During this time if you wish, you can back to the earlier version of Lightroom: restore an earlier version of update

  Kind regards

  Tanuj

• Have disabled my CS6 design and web premium on old mac but when I try to activate it on the new mac States the serial number is wrong... any ideas?

  Have disabled my CS6 design and web premium on old mac but when I try to activate it on the new mac States the serial number is wrong... any ideas? I have not deleted my old copy of my previous mac yet. How can I get the copy transferred to activate.

  Thank you

  Yes, you must uninstall and reinstall.  Try to use the cleanup tool to uninstall it in order to ensure that the stage is set for a correct installation (I have not used it myself, so I can't say much on this subject).

  Adobe Creative Suite cleanup tool
  ---------------------------------

  helps resolve installation for CS3 thru CS6 and creative cloud problems

  http://www.Adobe.com/support/contact/cscleanertool.html

• How to reset back to the importing State mass it?

  How to reset a selection of photos back to the importing State mass it?  Or better yet how to cancel a series of changes autosync?  (ctrl-Z does not always).

  I don't know how many times I ruined hundreds of photos because the Lightroom deselect does not work as in Windows.  Selection is more persistent and must be deselected manually.  In windows, clicking on any file désélectionnera all but one.  I went for an hour thinking that I was working on a photo!

  If it is too late to use Ctrl-Z (i.e. you've restarted LR inbetween), select images all affected grid (you possibly can use a smart collection containing "Change Date" to identify them) and press Ctrl-Shift-R (or Menu Photo, develop settings, Reset).

  Gossweiler beat

  Switzerland

• Formatting of currency without new-import

  Background:
  
  • Cfmx7 running
  
  
  • CFFORM FORMAT = FLASH
  
  
  • I have several fields that are totaled using actionscript, most of these fields is the user input, so almost any dollar amount can be entered
  
  
  If the total is (for example) 375.00 (or any whole dollar amount) the form displays only 375 (not 375.00)
  Even if the total is (for example) 559.50, the form displays only 559,5
  
  The calculation is always correct, but the screen is not, we need for the zeros appear correctly.
  
  Since then, with a format = flash cfform, I can't use the new / import / (or some other functions) in actionscript, currency formatting scripts that I found are not usable.
  
  I created the following code for "append" le.00 or .n0 on the end of the amount and displayed in the field:
  
  

  Quote:
  
  < variable CFSAVECONTENT "Subtotal" = >
  var a = ((pmt_qty.text) Number * Number (pmt_amount.text)) + number (fieldone.text) + (fieldtwo.text) number + number (xt fieldthree.te);
  If (!) Number (a) %1)) () {subtotal.text = number (a) + ".00"}
  If (Number (a) %1) {subtotal.text = Number (a)}
  var b = (Number (a) * 10);
  If (!) () Number (b) %1) & & (Number (a) %1)) {subtotal.text = number (a) + '0'})
  < / CFSAVECONTENT >
  

• WARNING jdev11u2: transient state added to StateManager.  State cannot be

  Hello
  
  What is the meaning of the following warnings:
  
  30.4.2009 09:50:10 oracle.adf.share.http.HttpSessionStateManagerImpl putState
  WARNING: Transient state added to StateManager. State cannot be serialized. State id: data.prvy_view_indexPageDef.LtisView13__cubicDefinition
  30.4.2009 09:50:10 oracle.adf.share.http.HttpSessionStateManagerImpl putState
  WARNING: Transient state added to StateManager. State cannot be serialized. State id: data.prvy_view_indexPageDef.LtisView13__dataModel
  
  Thank you
  
  Branislav

  John is correct.

  Widget puts objects transient state on the StateManager (for performance reasons), and these objects are not serializable.
  See [warning added to StateManager transient state. State cannot be serialized. | http://blogs.Oracle.com/Didier/2009/05/warning_transient_state_added_1.html]

  Kind regards

  Didier.