register the vsphere with vcenter new replication

Similar Questions

• Cannot save the vCO with vCenter WebClient

  Hi all

  I have a strange situation that I hope you can help me with.

  Basically, I am fighting to save the vCO with vCenter WebClient device, when I try to add in the web interface of vCenter, the test connection fails.

  The vCO device has been configured to use AD authentication and the vCenter plugin seems to be set up correctly. In fact, I can run all workflows from it interact successfully with the vCenter.

  I followed the troubleshooting steps in similar positions, but none of them have worked:

  Re: impossible to integrate vcenter orchestrator with WebClient

  Re: Can't save orchestrator in vsphere client of web (v5.5)

  I can see the extension of vCO through the https://vcenter1.xxxxx.com/mob . I have also not saved and put it back with the same result.

  I also tried with different versions of the device to vCO (5.0, 5.5.1 5.5.2...) but no joy with any of them.

  I want to emphasize that I used a device registered with vCenter, vCO which has been deleted. After checking the mob site, I discovered that the extension pointing to this previous vCO was still in place, so I recorded. But the issue has not been resolved.

  vCenter 5.5.0 build 1750785

  vCO 5.5.2 build 1951762

  Any other ideas?

  Any help would be appreciated.

  In order to use the vCO within customer web vSphere vCO must use SSO authentication and SSO used must match the one used by web vSphere client.

  What happens is this user log in vSphere client and web based on as user token credentials is generated.

  This token is presented to the vCO and vCO is not able to check (because in LDAP mode or using different SSO server or...) vCO rejects the request.

• My screen iphone6 is cracked and in my country, they can only change the iphone with a new one and with a very high price. Is there anyway that I could replace just the screen?

  My screen iphone6 is cracked and in my country, they can only change the iphone with a new one and with a very high price. Is there anyway that I could replace just the screen?

  No, if you want to keep all rights to the service or support from Apple. Not to mention the fact that it then will be bork Touch ID and make the phone unusable if ever, you restore or update of iOS.

  Apple doesn't sell parts of the iPhone. There is no legitimate sources for replacement screens.

• try to get on the internet with my new dongle a message continues to say that I have security certificate errors

  Dongle doesn't work, get errors certificate on the screen

  Hi I have a pc, and when I try to get on the internet with my new dongle, a message repeat myself that I have security certificate errors, so I can't get on the net to fix and I don't know how to resolve this, the pc was origanally used for a modem by my sister. Does anyone know how to solve this problem.

  Hello

  1. What is the brand and model of the dongle?

  2. have you installed the drivers from the dongle?

  If this is not the case, the same install from the manufacturer's Web site.

  I suggest you to contact or visit the site of the factory to install drivers and check if that helps.

  I hope this helps.

• HP Deskjet 710C does not print colors (also after changing the cartridge with a new one)

  HP Deskjet 710C on Windows XP

  Problem: Printer does not print color. Black printing works. It also does not print color now, I changed the color with a new cartridge. Remove the printer from Windows XP and reinstall also does not resolve it. Also by using the option in Windows/printer driver for the cleaning cartridge has failed. Anyone know a solution to this?

  There is a document about the lack of color of the issues on the printer Deskjet 710C that can be found here.

  I hope this helps!

• I need to transfer a license for Acrobat Pro XI from one PC to another, but I lost my original disks. I register the product with Adobe but it doe not appear on my identification code Adobe how can I find my product to install it on another PC

  I need to transfer a license for Acrobat Pro XI from one PC to another, but I lost my original disks. I register the product with Adobe but it doe not appear on my identification code Adobe how can I find my product to install it on another PC?

  Hello

  If you have the serial number of Adobe Acrobat pro 11.

  Download the program and activate it using the serial number.

  Download link:- download Acrobat products | Standard, Pro | DC, XI, X

• How to register the database with earphone

  Hello
  
  After you create the database, it is automatically saved with the listener. I am not registered the database with listener then how it registers itself automatically with the listener. How a registry database that is automatically saved.
  
  I use 11 GR 2 and RHEL 5.4
  
  
  [oracle@dog1050 bin] $ cat /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
  # Generated by Oracle configuration tools.
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = dog1050) (PORT = 1521))
  )
  )
  
  ADR_BASE_LISTENER = / u01/app/oracle
  
  
  
  
  [oracle@dog1050 bin] $ lsnrctl status
  
  LSNRCTL for Linux: Version 11.2.0.1.0 - Production on December 29, 2011 16:03:09
  
  Copyright (c) 1991, 2009, Oracle. All rights reserved.
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=dog1050) (PORT = 1521)))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
  Start date December 29, 2011 16:01:07
  Uptime 0 days 0 h 2 min 1 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file
  The listener log file /U01/app/Oracle/diag/tnslsnr/dog1050/listener/alert/log.XML
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=dog1050) (PORT = 1521)))
  Summary of services...
  Service 'db11g' has 1 instance (s).
  "Db11g", State LOAN, has 1 operation for this service...
  Service 'db11gXDB' has 1 instance (s).
  "Db11g", State LOAN, has 1 operation for this service...
  The command completed successfully
  
  
  
  Thank you
  Knani K

  >
  By default, the PMON process stores information about service with his local listening on the local address by default TCP/IP port 1521
  >

  Please read more http://docs.oracle.com/cd/E11882_01/network.112/e10836/listenercfg.htm#CHDCCHIC.

• hosts mixed esx 3.5 and older new vsphere with vcenter 4.1 esx hosts. Need advice please.

  Hello, I have an existing the vcenter server install managing two esx 3.5 hosts. The vcenter is version 2.5.0.x. I want to manage my new hosts of vsphere 4.1 esxi through the vcenter. I would check that if I improve my vcenter 2.5.0 for the last version vcenter Server required for the 4.1 that I will be able to manage my old esx 3.5 hosts? Will be an upgrade inplace vcenter 2.5.0.x support now the license server in place or I will have to manually install this after? Thanks for any info. Doug Dorbuck

  You can mange ESX 3.x host with vCenter 4.x - you can't manage ESX 4.x, vCenter 2.x hosts

  I think that in a place of upgrade will keep the license server - otherwise you will need to reinstall the server-licensing

• Problems of updating the app with a new BlackBerry ID token for the signature

  Hi all

  Since may 2014, I have an application that I update often... This may 2015 my BB ID token expired, so I created a new one with the same BlackBerry ID account, that I have used before. However, I am facing some problems to make a new update, I got the "file bundle (votre_nom) was rejected. Package ID is required for all .bar file. "If this is an upgrade, ID of Package must match the ID of Package original batch file."

  The thing is, my application has been signed with the same BB ID account and keep the same package name, as always.

  Circumvention of this topic (link here) say contact at BB Vendor Management Support to update my application, but is not guaranteed retain the same downloaded application to the BB world.

  My question is: if I generate a new BB ID token with the same account ID to BB, and I keep the same name of packgane, how can I do to update my application without losing my users?

  THX

  The account name or package BlackBerry ID has changed.  It is the only cause of this error.  Here's how you can verify that it has changed.

  1. Open your original BAR file with a utility like WinZip archives.
  2. Extract of the MANIFEST. MF file in the META-INF directory.
  3. Repeat this procedure with your new file BAR.
  4. Open the manifest files in a text editor.
  5. Compare package-author-Id and the name of the Package in the manifest.

  If the package-author-Id is different, the application was signed with a different account.  If the Package name is different, then that changed.

  If you find that package-author-Id has changed and you do not know what account has been used send me the package-author-Id in a private message and I can watch it for you.

• register the database with the database Vault

  Version: 11.2.0.2.0

  Operating system: Solaris

  Can someone tell me please how to enter Oracle Database Vault with a database from command line without using DBCA.

  The doc oracle E23090-10 provides only through the DBCA Wizard. I'm having some trouble with my software x - manager, so I cannot use the DBCA Wizard and seeks to enter the vault of the database with the database by command line.

  
  

  Oracle database Vault is already enabled through 'chopt enable lbac' and 'chopt enable dv. Now all I do is register with the databases on the server.
  

  Thank you

  Hi DK2010, actually I found my answer in the metalink Doc ID 803948.1

  I have to run the dbca in silent mode and at the end of this doc, it's exactly what I need.

  "

  DBCA-silent - configureDatabase

  sourceDB-

  [- sysDBAUserName

  -sysDBAPassword ]

  -addDBOption DV, WHO

  -dvUserName

  -dvUserPassword

  -dvAccountManagerName

  -dvAccountManagerPassword

  "

  Now, the keystone of the database is registered with the database.

• Preservation of the presets with a new installation

  I'll take a built entirely new computer. I'm upgrading from Windows XP to Windows 7.  When I upgraded to CS5 to CS6 on my current computer, I said yes to preserve the old presets. But how it will work on a new computer? And, in fact, all my versions of Photoshop that goes back, I don't remember how long have been updated. How this is handled with a new computer? I have the installation discs for CS3, CS5 and CS6. I don't know about older versions.  So, two questions here: 1. How is managed installation CS6 if everything I had for the last who-knows-how-long is upgraded. I started with one of the very first Photoshops. And 2. How to preserve the presets it took me a year to work on CS5, as well as my gazillion actions and who knows what else?

  Just save the settings using the flyouts in the respective palettes for brushes, styles etc. to external files. During installation, you simply install CS6 - it will ask for the serial number CS5 for verification.

  Mylenium

• Registering the PAP2T with a SPA9000

  I'm trying to get a PAP2T to save with a SPA9000.

  The PAP2T says "Unable to connect to the login server" - a network trace shows that the SPA9000 returns 404 not found when the PAP2T tries to register.

  I created the following on the PAP2T

  Port SIP LINE1: 45010

  LINE1 Proxy: : 7070

  (SPA9000 defined 7070 as its Proxy listening port to)

  LINE1 user ID: 2501 (post number to use)

  (I tried affecting and not a password as well)

  But other that that, I did not put anthing else - "Use outgoing proxy has the value no. I use 5.1.1 firmware.

  Everything is on the same local network and seems to work other than...

  There seems to be no instruction on the connection of these two products together.

  Any body got any ideas.

  See you soon

  s

  Hi, I have the SPA9000 like my PBX, the new Gigaset phones for users and the PAP2T to connect the phone voip either (polycom Conference phones)

  The entire Setup is on the same local network, but behind a NAT/Firewall with DHCP from the NAT/Firewall.

  The SPA9000 is connected to the network via the WAN port

  I'll also VOIP and the PAP2T phones to use the SPA9000 as its SIP provider.

  I've now had the PAP2T works with the SPA9000! If it can help someone else, here is my configuration:

  I have a password set on the SPA9000 (defined by going to tab SIP on the SPA9000 (since the connection admin/advanced mode) and password phone Ext:-which is below).

  NOTE: You need not perhaps not a password - I do it because I'm also using using Gigaset VOIP phones that does not connect to the SPA9000 without password.

  I put on the PAP2T (using the web interface of the PAP2T) from the Line1 TAB

  (a) sip port is not used any other phone (unique)

  (b) proxy in the ip address and the port of my SPA9000 (e.g. 192.168.1.2:6060). You must set values based on the configuration of the SPA9000

  (c) the value that identifies the extension no, I wanted the phone to be on (e.g. 2503)

  (d) to set the password to be the same as the SPA9000

  use Auth ID value e) YES

  (f) set the Auth ID on the extension, I wanted the phone to be on (e.g. 2503)

  (g) line enabled to yes!

  And it works!

  Thanxs

  s

• disclosure of the API with vcenter linked mode

  The API on a vcenter arrive on an another vcenter linked entities? In the linked vcenter inventory seems to appear anywhere in the CROWD.

  The linked vcenter can be managed in the vcenter gui, but it's just mistletoe knowing to send requests to the api for the other vcenter? The API knows something about the related modes?

  No, he can't manage them. In implementing related patterns as I understand it, it provides you with just the connections for the two vCenter. Linked Mode also uses ADAM to replicate permissions between linked VC, but you must always send API calls appropriate for the appropriate vCenter if you want to perform a specific operation on a given entity. It isn't really a "Federated", but just vCenter allowing multiple connections in a single view or a pane of glass.

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• I have the problem with connecting new gen 3 ATV to my wifi network.  This device must be used for the TV on the floor.  I have a GEN 3 oldest device installed in TV downstairs. I followed the instructions but does not connect.

  I just bought new gen 3 ATV.  Must be installed in the TV upstairs.   Unable to connect to the Wifi network.   I followed the instructions for the installation, the network is OK for other devices.  Have more older gen 3 ATV TV downstairs in the operation.    Is there a problem to have 2 ATV on the same network, or am I missing something?

  Hi Keithfromsubiaco,

  I am pleased to have the Apple TV on my TV as well and have a up and down.  Both work well, is not a problem having both on the same network.

  After going through the normal installation process, I would recommend then walk through this article.

  Get help with Wi - Fi on your Apple TV networks - Apple Support

  Note that you will want to test after each step.

  Let us know how it goes.

• How to use the recovery with a new ssd disk after the death of original hard drive

  I thought I had a simple fix/upgrade for my dv5 - 2077cl.

  decided to replace the defective hard drive with an SSD. couldn't afford a 240 GB size but it's big enough for my needs.

  I installed the new drive easily and cycled through my 4 recovery disc reinstall the minimum overlap. After you delete the last record, the screen goes gray and there is a cursor in the top left corner for more than 10 hours.

  I finally it turned off and tried again two times the same results. I removed the DDI and run disk management on it from my other laptop and an external cable to remove the partiion and create a single partition. Tried to install windows xp on a disk that I own this isn't an update or restore disc thinking I might switch to windows 7 32 bit because I own and upgrade the disks also. even if it is a 64-bit system, but I do not have any disk 64-bit except the recovery disks that didn't seem to work.

  When I ran the xp it seemed to work but then I got the blue screen that said there is no drivers for the SDS (the error is as follows stop0x0000007B (0xF78D2524, 0XC0000034, 0x00000000, 0x00000000))

  So I guess I need to have a windows 7 install disk rather than the recovery discs?

  the SSD is a Silicon Power S70 240 GB.

  any suggestions?

  Recovery discs usually require a hard drive of equal or greater capacity. XP doesn't have SATA drivers Sockets.

  If you can read the Microsoft Windows 7 of 25-character license key, you can download a Windows 7 ISO file to burn to a DVD or USB flash drive. The version must match that's installed on your PC as shown on the sticker COST Microsoft fixed on the bottom of the laptop. Like Windows Home Premium.

  Links to downloads of Windows 7 ISO files: