Preservation of the presets with a new installation

Similar Questions

• Function of scrolling of the mouse after a new installation.

  Hello, when I got my laptop (m6 1125dx Envy) I had a nice feature that allowed me to scroll through the pages under the mouse cursor when the page is the subject of a scroll is not the current page. It was great when look a things side by side and comparing elements. Having to click on a window to make it active just to scroll is a pain. This is a default feature in ALL linux distributions and I missed a lot when I'm on windows.

  When I got this laptop windows 8, I found that I had this feature. I was happy to extreally. After awhile, I reloaded my operating system with a new installation of windows 8 and noticed this feature is now gone.

  I installed all the drivers and the software that was in the file "c:\SWetup". I've updated all the drivers from the HP website. Still no scroll mouse of pages under the cursor.

  I know there are applications of third party like katmouse and others who do this, I tried them and they do not seem to work in windows 8.

  It's something that came with the laptop. Can someone give me a helping hand for this feture back?

  ChangedSoul,

  You can enable mouse Hover in two ways:

  Windows key + U (open access) >

  If you have not previously opened the ' Centre

  then

  Uncheck both "always read this section aloud" and "always this section analysis.

  Select / Open "Make the mouse easier to use" >

  Under "Make it easier to manage windows" section >

  CHECK "Activate a window by hovering over it with the mouse.

  Ok

  -----------------------------------------------------------------------------------------------------------------------------------

  Comment

  This method should work, and if this is the case, it will also be enable the development by mouse and POP before the window where you point your mouse.  Frankly, I find it irritating.

  More likely, because you're in the Linux world, looking for likely action "Set mouse without Pop" first defined in Unix all these years and then moved to Linux as the obvious of the window control decent method.  Yes, I'm a little prejudiced, but only a little.  The smile.

  Glide mouse (no window pop) to Windows 8 is easy to configure. It requires a simple registry hack to set the mouse Hover in place.

  Windows key + R > regedit > OK

  Once you have full registry > export a copy of the register to your favorite folder

  Open key HKEY_CURRENT_USER\Control Panel\Mouse

  Change the value of REG_WORD ActiveWindowTracking to 0 × 0000001 (1)

  Open the key HKEY_CURRENT_USER\Control Panel\Desktop

  Change the value REG_BINARY UserPreferencesMask, MSB (most significant byte or the first value in the chain), at 01

  Example:

  The FIRST value of the string can be 41, which displays the front window > change the value 01

  The FIRST value is perhaps 9f > replace the value 01

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  OPTIONAL:

  If you want to slow down the reaction of the constant focus, you can add a delay to the duration of the window to change the focus after the mouse is moved.

  Key HKEY_CURRENT_USER\Control Panel\Desktop

  Change ActiveWindTrkTimeout REG_DWORD > a value you like

  Examples:

  0 × 00000080 (128ms)

  0 × 000000c8 (200ms)

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  Save and exit >

  Restart / reboot the system and log on

  Fact!

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

  Click on the star of congratulations !

  It's a big 'thanks' for the author's efforts.

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

• After disk hard crash, loaded Windows 7 and get "Software Licensing Service determined that specified only usable product key for the upgrade, not for new installations.

  Original title: Windows Vista product key used for any new installation.

  I bought the upgrade from Windows 7 Home Premium to Windows Vista CD, then had a hard drive crash, then installed a new hard drive. Load the purchased Windows 7 on new hard drive, now I get the message '... Software Licensing Service determined that specified only usable product key for the upgrade, not for new installations. That means that I have to load Vista on the new hard drive, and then update? Both for the end user (paying customer) hostile.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  OR

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  If you do not have your Windows Vista installation media, you can download a fresh copy:

  Windows Vista (in English) with Service Pack 1

  Windows Vista (x 86)		Windows Vista (x 64)
  X 14 - 63452.exe	X 14 - 63453.exe
  Boot.wim	Boot.wim
  install.wim	install.wim

  Installation instructions (creation of bootable DVD/USB)

  You must download the .exe, the boot.wim and install.wim file in the same place. Run the .exe file and it will extract all the files in a folder called Vista. Start Windows install will be now (cancel Setup).

  

  To create a .iso bootable extracted the files in the folder of Vista and download Imgburn. Run imgburn and select 'Create Image file from files/folders'

  

  Select the record button browse and select the folder of Vista. Then select Advanced.

  

  Left will be your folder of Vista, to the right, make sure that you have verified make Bootable Image, changed the developer ID: Microsoft Corporation, load segment: 07C 0 and loading areas: 4.

  

  Select the folder browse button then navigate to your folder of Vista, then select the startup folder and select the file called etfsboot.

  

  Select the generate button.

  

  Save your .iso

  

  Select Yes when the prompt for the Volume name, and select ok. Finally, wait for it to make the .iso file.

  Once you have the .iso file, they may want to use the Microsoft .iso to USB/DVD tool to create a bootable DVD or USB flash drive (USB FlashDrive recommendations, see here).

  

  FF

• My screen iphone6 is cracked and in my country, they can only change the iphone with a new one and with a very high price. Is there anyway that I could replace just the screen?

  My screen iphone6 is cracked and in my country, they can only change the iphone with a new one and with a very high price. Is there anyway that I could replace just the screen?

  No, if you want to keep all rights to the service or support from Apple. Not to mention the fact that it then will be bork Touch ID and make the phone unusable if ever, you restore or update of iOS.

  Apple doesn't sell parts of the iPhone. There is no legitimate sources for replacement screens.

• try to get on the internet with my new dongle a message continues to say that I have security certificate errors

  Dongle doesn't work, get errors certificate on the screen

  Hi I have a pc, and when I try to get on the internet with my new dongle, a message repeat myself that I have security certificate errors, so I can't get on the net to fix and I don't know how to resolve this, the pc was origanally used for a modem by my sister. Does anyone know how to solve this problem.

  Hello

  1. What is the brand and model of the dongle?

  2. have you installed the drivers from the dongle?

  If this is not the case, the same install from the manufacturer's Web site.

  I suggest you to contact or visit the site of the factory to install drivers and check if that helps.

  I hope this helps.

• HP Deskjet 710C does not print colors (also after changing the cartridge with a new one)

  HP Deskjet 710C on Windows XP

  Problem: Printer does not print color. Black printing works. It also does not print color now, I changed the color with a new cartridge. Remove the printer from Windows XP and reinstall also does not resolve it. Also by using the option in Windows/printer driver for the cleaning cartridge has failed. Anyone know a solution to this?

  There is a document about the lack of color of the issues on the printer Deskjet 710C that can be found here.

  I hope this helps!

• Updated Windows and transfer to the new computer with a new installation

  Hi I have an office of aging that I plan on upgrading within 12-15 months. I am currently under W7 and want to upgrade to 8.1. When I finally buy my new material under a BONE, me will be possible to transfer 8.1 overall with a full installation and not an image copied from my current position?

  Thanks for the tips

  To clarify my last sentence: If you buy Windows 8.1 full and use it to upgrade your old machine (Win 7), later when you buy your new computer and install 8.1, you will need to remove the old computer (it can only be activated on a PC at the same time).  So if you were to sell your old computer, legally you have to withdraw Windows 8.1.

• Fixed a crash issue repeated with a new installation of Firefox on Windows 8.1 28

  It is not so much a question as a contribution to the solution.

  On a new computer running Windows 8.1 a new installation of Firefox 28 has been repeatedly crash or freeze ("no response"). Loading pages can be slow and scrolling in staircase. Totally unusable, especially after playing content with Shockwave.

  Although I had not installed the plug-ins outside Shockwave and Adobe Acrobat, I have had a look and was surprised to see that I had never asked. I disabled those I don't think I need:
  Intel's Identity Protection technology
  Photo Gallery
  WildTangent Games App alarm presence V2.

  Since these disabling Firefox works well. But I was forced to use another browser for a week until you find the time to research the problem.

  Why are these called not - for and of course (at least one) annoying plugins installed by default? It does not have any good Firefox!

  Plugins are not included in the Firefox download, because Mozilla is not allowed to distribute. Firefox automatically detects the plugins on your system through a number of methods, so it was a good idea to revisit and disable those you don't need. I have really no idea whence the special ones.

• How can I get my original Favorites after accidentally syncing with a new installation of Firefox?

  I installed Firefox sync on a new netbook with Ubuntu and it worked at first, synchronize my bookmarks from my PC to the netbook with no problems.

  However yesterday, he decided to synchronize the original bookmarks on the netbook with my PC and now I have lost all my favorite 100 + original, they always appear in the URL bar when I type in the keywords for a particular bookmark but not in the menu bookmarks.

  How can I stop Firefox sync to repress my actual Favorites? How can I return the situation to how it was before using this addon?

  See replace your data synchronized , but read the warnings.

  • See also Firefox Sync troubleshooting and tips

  It is still a useful precaution to perform manual backups of bookmarks

  • See restore bookmarks from a backup or move them to another computer

  This article explains also on safeguards autobookmark generates firefox, but don't forget to perform manual backups as you work, it is very easy to replace the wrong backup set.

  I'm not entirely sure what firefox in your case, perhaps synchronized Netbook doesn't have the game waited bookmarks on it.

  Probably sync can be uninstalled or disabled as any other add-on

  • See disable or remove modules

• Problems of updating the app with a new BlackBerry ID token for the signature

  Hi all

  Since may 2014, I have an application that I update often... This may 2015 my BB ID token expired, so I created a new one with the same BlackBerry ID account, that I have used before. However, I am facing some problems to make a new update, I got the "file bundle (votre_nom) was rejected. Package ID is required for all .bar file. "If this is an upgrade, ID of Package must match the ID of Package original batch file."

  The thing is, my application has been signed with the same BB ID account and keep the same package name, as always.

  Circumvention of this topic (link here) say contact at BB Vendor Management Support to update my application, but is not guaranteed retain the same downloaded application to the BB world.

  My question is: if I generate a new BB ID token with the same account ID to BB, and I keep the same name of packgane, how can I do to update my application without losing my users?

  THX

  The account name or package BlackBerry ID has changed.  It is the only cause of this error.  Here's how you can verify that it has changed.

  1. Open your original BAR file with a utility like WinZip archives.
  2. Extract of the MANIFEST. MF file in the META-INF directory.
  3. Repeat this procedure with your new file BAR.
  4. Open the manifest files in a text editor.
  5. Compare package-author-Id and the name of the Package in the manifest.

  If the package-author-Id is different, the application was signed with a different account.  If the Package name is different, then that changed.

  If you find that package-author-Id has changed and you do not know what account has been used send me the package-author-Id in a private message and I can watch it for you.

• going from 3.5 to 4 with a new installation of vcenter Server

  Hey

  We want to use a new server and a new installation of virtual center 4 to connect to our existing ESX 3.5 servers. am I right in thinking I can disable DRS and HA, then simply disconnect them from the old server and connect them to the new server? (I'm not worried about performance data at all)

  then we will upgrade the tools of virtual machine on virtual machines and then the real hosts go to 4.

  its ok?

  see you soon

  Here is the information that I have followed the vCenter of moving to a new server. Worked like a charm. Let me know if you need anything that anyone else.

  http://KB.VMware.com/kb/5850444

• override the preset with the adjustment brush?

  I used creative B & W low contrast preset to give a picture of my neighbor white cat a high key B & W look. I would like to use the adjustment brush to restore the color of cat's eyes. I thought raise saturation would do the trick because the preset reduces saturation to 0. Using the brush Wo does not seem to do something for the cat's eyes.

  You can see the image here...

  Thanks for your suggestions.

  LR 2.4

  To a proposal, the preset may also have changed the B & Wtreatment , in which case the saturation to the brush has no effect. You will need to do the other way autour and brush on the parties of saturation of the image. Or get an easy way out and use the PS and masks and layers.

• 640 proBook G1: Activation of Windows 10 with a new installation

  Hello

  We received a new batch of HP Probook 640 G1 with 8.1 installed and the company decided that they prefer to have systems to update to Windows 10.

  We tried two different methods to do this, whenever we get 10 installed Windows activation is rejected because installation does not have a product key installed.  We know that the product key is stored in the BIOS, but we are not able to determine which is the key.  It is also our understanding that Windows should have been able to detect the product key.

  Any suggestions on where we can get the product key in the BIOS or a method to have Windows see the correct key in the BIOS.

  Also, I saw a suggestion for a tool called Belarc Advisor when we run this it shows (key: not activated) for the product key.

  Thanks for your help.

  Thanks for the replies.

  It is with Windows, having satisfied Microsoft they provided a different installation media and everything works fine.

  Construction, we started with was of 331 and they gave us 953.  Not sure why our distribution did not have the latest media available.

• I have the problem with connecting new gen 3 ATV to my wifi network.  This device must be used for the TV on the floor.  I have a GEN 3 oldest device installed in TV downstairs. I followed the instructions but does not connect.

  I just bought new gen 3 ATV.  Must be installed in the TV upstairs.   Unable to connect to the Wifi network.   I followed the instructions for the installation, the network is OK for other devices.  Have more older gen 3 ATV TV downstairs in the operation.    Is there a problem to have 2 ATV on the same network, or am I missing something?

  Hi Keithfromsubiaco,

  I am pleased to have the Apple TV on my TV as well and have a up and down.  Both work well, is not a problem having both on the same network.

  After going through the normal installation process, I would recommend then walk through this article.

  Get help with Wi - Fi on your Apple TV networks - Apple Support

  Note that you will want to test after each step.

  Let us know how it goes.

• Using 'old' with a new installation of Oracle 11 g ODBC drivers

  Hello
  
  We run an Oracle-DB with 10.2.0.3 (32 bit) and a couple of Clients-ODBC (all 32 bit) (too many versions, Te 10i, 9i, 8i,...?)
  
  Now we intend to change the server to be an Oracle 11 g 64 bit Installation.
  
  Y at - it all available information that customers should be able to connect against this new Db - Oracle 11g Server?
  
  Thanks for any suggestions, but not the recommendation of change all the clients to be 11g - customers.
  
  Mark

  Assuming that you have Metalink, the next note will tell you what to be and never was supported with regard to client/server compatibility:
  Note.207303.1 Client / Server / Support of interoperability between different Versions of Oracle

  It will be useful,
  Greg