Registration of QTime in QSettings - problem

I'm trying to save certain settings. The code below demonstrates the correct alert with correct zoom box and updInter values.

QSettings settings("ASDF", "QAZWSX");

QTime pickerTime=root->property("pickerTime").toTime();

settings.beginGroup("AppSettings");
    settings.setValue("zoom", root->property("zoom"));
    settings.setValue("updInter", pickerTime);
    alert(settings.value("updInter", "E4").toTime().toString());
settings.endGroup();

But code below (executed at the beginning of the app) shows the alert box correct with correct zoom and incorrect (00: 00:00) updInter values...

QSettings settings("ASDF", "QAZWSX");

settings.beginGroup("AppSettings");
    alert(settings.value("zoom", "E3").toString()+" "+settings.value("updInter", "E4").toTime().toString());
settings.endGroup();

Thank you in advance for the help

Thanks, @tzander, but savings QTime wasn't mistake - the actual error was that, in some moments (probably onExit), application records QTime == '00:00:00.

So, I create simple ease condition:

if(root->property("pickerTime").toString().remove(0,11).compare("00:00:00")!=0){
    settings.setValue("updInter", root->property("pickerTime"));
}

QML file, I

property alias pickerTime: intervalPicker.value

(...)

DateTimePicker {
       id: intervalPicker
       mode: DateTimePickerMode.Timer
       value: dateFromTime("00:00:15")
       title: qsTr("Select")
}

I think, it's very funny, DateTimePicker sometimes changes the value of time

Tags: BlackBerry Developers

Similar Questions

  • successful registration with one of the problems with other sources

    Hello world

    I have two icecube_cur_ownr and icecube_his_ownrpatterns.
    I can access these two SQL schemas, Toad. The TNS entries are as follows



    icecube_cur_ownr =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xx.xx.xx) (PORT = 1521))
    (CONNECT_DATA =
    (SID = PRIMARY)
    )
    )



    icecube_his_ownr =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = xx.x.xx.xxx) (PORT = 1521))
    (CONNECT_DATA =
    (SID = CADS)
    )
    )


    Also I'm able to save icecube_cur_ownr as a source and successfully import the tables in OWB via design center

    problem is with icecube_his_ownr. During the registration process, when I try to test the connection it pops me an error in the results of the tests

    ORA-12170: TNS:connection timeout exceeded

    Ignoring the error, I went to import the tables and the error message popped up is as follows

    SQL exception
    Exception error: SQL Reporsitory
    Class name: cacheMediator
    Method name: getDDentry starting from DB
    Repository error message: ORA-12170: TNS:connection timeout exceeded

    You wonder why the connection is successful for a source, otherwise the other that I followed the same procedure for both cases.


    Could you please guide me to solve this problem.

    Thank you very much
    Sridh

    Hello

    It is different because you connect to diffferent PRIMARY = instances.icecube_cur_ownr, icecube_his_ownr = CADS.

    Have you used the same TNS-entry to connect with the CADS by sqlplus? If you have several oracle_homes you are not really sure what the owb tnsnames.ora uses.

    Then search for other files tnsnames.ora on this machine and check the entry for icecube_his_ownr. May differentiate them.

    Or use the host/port/Service method to create the source location to icecube_his_ownr, not the option of tns.

    Kind regards
    Detlef

  • VI to measure FRF having a problem writing data

    Respected Sir / Mam,.

    I created a Vi to measure the signal in the modal analysis. The Vi is to give a very good signal, but the problem is in the writing of the data. The number of samples is given as 10K and rate is 100 k, but only 5 k datas, it writes to the file. The signals are good, but the registration of data is the problem. I have attached the VI. Your first answer will be very useful for my future work.

    thanking you

    RAM

    In fact, there is nothing wrong. You collect 10 k of temporal data. Spectral analysis that you perform it becomes 5 k of data in the frequency domain. It seems that everything is as it should be.

    Mike...

  • When I opened my disk cleanup, he asks just files to do, I select and once it gets to "Setup logs files" it just closes. How can I solve this problem?

    Disk Cleanup doesn't work do not

    Hello

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    (Try to run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup)

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ------------------------------------------

    Then, check here:

    Disk Cleanup stops working and does not remove the files in Windows
    http://www.tips4pc.com/articles/computer%20Troubleshooting/disk_cleanup_stops_working_and_w.htm

    Drive serious cleanup problem in Windows caused by broken registration
    http://www.Winhelponline.com/blog/serious-disk-cleanup-problem-caused-by-broken-registration/

    Yet an another problem of disk cleanup
    http://www.Winhelponline.com/blog/yet-another-serious-disk-cleanup-issue/

    -----------------------------------------

    Good alternative to free - CCleaner - disk cleanup

    CCleaner - free
    http://www.CCleaner.com/

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • VCS Starter Pack - registration failure

    I can't save my customer movi in VCS started pack x7.1

    It keep ON message display

    Connection failed

    due to registration failure

    If the problem persists contact IT support

    Address findme, user account and local database accounts are configured with the same name/password

    Default and default area sub-area together to verify the credentials.

    I can solve the DNS with the public IP address that is configured in the VCS.

    In the Journal, I get this error message on
    Sep 15 13:36:01 "" "" "" TVCS: event = "error decoding" Service ="SIP" Src - ip = "219.92.14.189" Src-port ="50943" Dst - ip = "219.92.14.190" Dst-port ="5061" detail = "(no host valid in the URL of)" Protocol ="TLS" Level = "1" elements UTCTime = '2012-09-15 13:36:01, 285"
    Sep 15 13:35:58 "" "" "" TVCS: event = "error decoding" Service ="SIP" Src - ip = "219.92.14.189" Src-port ="50942" Dst - ip = "219.92.14.190" Dst-port ="5061" detail = "(no host valid in the URL of)" Protocol ="TLS" Level = "1" elements UTCTime = '2012-09-15 13:35:58, 402"

    Grateful if someone could help.

    Thank you

    Can ensure you that the FindMe ID for the user understands the SIP domain you use (example below) and repeat the test.

  • CS3 design standard registration error

    I can't check of this product that I just installed. When I get to the registration window, it says "a problem has been experienced so he was trying to send information on the Internet"

    It's Adobe creative Suite 3 design standard.

    Also, I get an error box that says "Adobe updater close unexpectedly".

    Thank you Jim for clarification.  If the software is no longer open test mode then it is duly authorized.  You will receive a prompt trial every time that you open the software.

    For DVD content it contains plugins, brushes and other additions that can be used with various Adobe Creative Software titles.  You want to install the additional content by copying it to the correct location for this application.

    If you have any additional questions regarding the content of DVD you can start a new discussion in the forum for this application.  You can find a list of available forums at https://forums.adobe.com/welcome.  I would recommend showing the specific file name and the extension that you are curious about.

  • Cannot complete the registration process of the CS6 due to the error of the Adobe ID

    I just installed 13 copies of the CS6 in our studio, 12 with success, but we have problems. The registration process takes place without problem using our certificates is Adobe, the problem occurs when we have to enter the Adobe ID at the end of the process. The sappear two option, sign up later or log in now. Once we click sign in now it's just getting the spinning wheel of boredom, can't do anything. of course, the problem is it says that you have 7 days to do so before the application unusable.

    So what is the problem and how can I fix this and what should do with all of this in an Adobe ID? We have legal licenses, why do we also need an Adobe ID to complete the process

    Graham

    I had the same problem and contacted Support several times before finally found it must be my setup "corporate network".

    This is partly because Adobe is now require that use you your Adobe ID to save CS6.  See the link below:

    Adobe ID required for version beta of Photoshop CS6 and upcoming CS 6 products

    http://blogs.Adobe.com/OOBE/2012/03/Adobe-ID-required-for-Photoshop-CS6-beta-and-upcoming-CS-6-Prod.html

    After several conversations 'live' with Adobe support they gave me a link to directions for a work around.  The problem was our "corporate network" configuration, so what happens on every computer that you install CS6 on when you are connected to a network of "enterprise".

    To work around the CS6 registration on a "network of the company" error, you must do one of the following values: disable the proxy server, disconnect from the internet completely to use the offline Activation option or use another internet source external to complete registration CS6.

    Adobe technical support directed me to a forum on how to disable the proxy server, but really all you need to do is disconnect your internet, source and then you can generate the codes that are required to complete your registration with the option to enable offline. It worked for me, I'm ready now.

    See the links below:

    Support Forum link technique Adobe

    http://forums.Adobe.com/thread/1005256

    Offline activation
    https://exception.licenses.Adobe.com/AOES/AOES/v1/T1?locale=en

  • I have Mozilla Firefox. Why should I download it again?

    This is the first problem, that I just had. I will resign from registration because I fear other problems if I already meet first.

    brendamonaco said

    Why should I download it again?

    Other that the updates, there is no reason to download it again.
    Why do you think that you need to download again?

  • How can I contact an administrator?

    I'm having a problem record. Whenever I have it try said I you will receive an email with a link, I have to click to complete registration. Never, I get the email. I tried 5 times. I'm having a problem with Thunderbird was last updated. I don't want "all THE ADDRESSES.
    book opening whenever I have send an email. I have a commercial address book and a book of friends. If I wanted all addresses will be displayed only one book, I should have. In any case, these are two problems I encounter. No email to register. It is said to contact an administrator. I can't find an e-mail and I can't find an answer to my problem in address book. Thanks for any help.

    Why do you need to contact an administrator again? You logged in on the forum. So I have to assume that you have completed your registration.

    The second problem with the address book is a bug and is being developed.

    See bug 1142705

  • Satellite A100-003: Question about RAM and recording model number

    Dear Sir/Madam,

    1. the first problem is that I bought the notebook of Toshiba Satellite A100-003 model. But when I tried to save the European web site of Toshiba with my serial number it says Satellite A100-011. I do not understand what it means that. But I do not know my phone model A100-003-PSAARE-0470257Z. The serial number of my laptop is: 17739127G

    2. Another problem is the European website of Toshiba and Turkey Toshiba official site (http://www.toshibatr.com/notebook_filter.asp?ktg=A100) says Rams are 533 MHz "2 048 (1, 024 + 1, 024) MB of RAM DDR2 (533 MHz)"but mine is at 266 MHz. "

    http://img510.imageshack.us/my.php?image=satellitea100003xg4.jpg

    I was wondering in Toshiba laptops of the Turkey has problems or handed in state something? I sent e-mail to the web site of Toshiba Turkey but they don't send me emails or information.

    Thank you for helping me,
    Halin

    Hello

    First of all your registration number is not a 'problem '. Maybe it s just a small mistake in their database. When I registered my P200 registration reported me another type as mine was, but after a call to the hotline of toshiba told me, that my machine is listed correctly in the database.
    Don t worry, register just she.

    With regard to the RAM:

    Do you know why's called it 'DDR' ram? That means 'RAM memory' and the goal is to double the frontsidebus.

    In your case, that means: the REAL AND PHYSICAL frontsidebus is 266 Mhz, but because the flow is double you have a 533 MHz frontsidebus (532, 34.Mhz).
    CPU - Z and WCPUID are simply display the physical clock of the RAM, but the frontsidebus double the signal and then you pure and authentic to 533 MHZ.

    I hope I could explain something to you. ;)

    Have a nice weekend

  • Size of the buffer

    Hey!

    I'm trying to capture and save images from my camera. I need a cadence of 210fps, so I decide to enter with a sequence and it works, if I take one length for a second registration. Here's the problem: when I want to make recordings of 10 seconds (set 2100 photos), I get the error message that my work space is not enough. Is there a possibility to decompress? I think LabView Gets an internal buffer, not my RAM, because I installed 16GB.

    Basler pilot piA640-210gc
    LabView 2013 (32 bit)
    Windows 7

    With the Basler camera, the images are 640 x 480.  images of 2100 would be about 645 MB in grayscale, but about 2.6 GB in color.  If you run 32-bit LabVIEW, you are probably exceeding the available memory.

    Your options would be to use 64-bit LabVIEW, acquire/store the images in the raw grayscale Bayer and later convert them or reduce the number of images.  I don't think you would have to compress the images you acquire them.

    Bruce

  • What laptopi marketing get this time ewery on screen; dll c:window\system\spool\divers\x64\lxcf. missing entry @16

    Hi when I start my laptot get this time on screen, c:window\system\spool\driver\x64\3lxcf time.dll ewry. lack of entry_run dllentry@16 it please can someone tell me what it is regarding

    This DLL (for example, Dynamic Link Library) would have to do with a dynamic timer in your Lexmark printer software. The Lexmark printer software is configured to load each time that you start the computer, so when Windows starts, this error occurs.

    First of all, I would like to see if the Lexmark Support site has an update for your printer software. If no update is available, the original software and reinstall it. Who would recreate the DLL registration and should solve your problems.

  • {MOVED} my built in mic does not work...

    I bought dell inspiron 15r 5520 and his microphone won't work, when I try to record my voice and reproduce it nothing washear, I check the microphone properties and it says it works, please help me,

    Hi nezz282,

    Please try to save the audio in safe mode. To enter safe mode follow the steps below:

    1. Restart the computer.
    2. Keep tapping F8 on Dell Logo screen.
    3. Once the computer enters Advanced Boot Option, select Mode safe mode with networking.
    4. Press ENTER.

    Try in safe mode with network registration.

    If the problem persists:

    1. Uninstall the Audio device driver and Device Manager software (checkbox in uninstall windows), and then restart the computer.
    2. Update the audio drivers, use the link below for audio driver: http://dell.to/183fPcx
    3. Click on the link above, select Download the file and follow the instructions on the screen to complete the installation.

    Try to use the microphone after trying the steps above and check.

    Please post the results.

  • TP Codec SX20 on UC540

    Hello

    Hope you read my story. This is my first time doing just that.

    I am currently doing an audio/video/IP telephony via IPSec Site to Site VPN (OpenVPN HP Server).

    For the site (new site), I have a VPNServer open HP, a UC540 and a bunch of SPA504G phones configured using the CCA.

    For site B (old site), we have the same implementation with the exception of some application servers and a telepresence codec Tanberge C20.

    But it is not me who makes the setup to site B, so I'm not aware of the rest of the details.

    I set up a static route on the A-UC540 pointing to the network site B site, the next hop ip address is the ip address of the site A openvpn server.

    I did the test of site A, and I can already make calls at site B and vice versa.

    But today is another story to the site A. I am trying to connect a telepresence SX20 codec to UC540 to make video calls on site B.

    The thing is, I can't save the sx20 on UC540 using the Configuration of Cisco's Assistant. So, I open a case with Cisco TAC and got 2 engineers of telepresence to assist me (strange?) and discovered that SIP and H323 are inactive. They said that they did not the integration between sx20 UC540 (they made only with CUCM, VCS, TMS, etc.. I told them that we have almost the same configuration in site B with codec C20.

    Then, I got the codec C20 of the B-site configuration because I do not know if they are supplying the UC540 as the external Manager.

    After xconfig/xstatus, I saw that the supply mode/directory server is "TMS", but I did not even send to Cisco TAC. And site B have also SIP and H323 inactive, but their telepresence works and has been there for a long time.

    It is possible the sx20 codec to UC540 layout uses the CUCM mode? Or there is no need to save it and just set up the video calls from site to site?

    I really have no idea how to proceed.

    Any response and help will be appreciated.

    Hi Bernard,.

    close this discussion if the issue is resolved

    UC540 not supported for registration

    and the second problem was solved through factory reset.

    Thank you

    Ravi kr.

  • "The ordinal 266 not found in the dynamic link library msi.dll."

    I was not able to download yahoo messenger on my computer since that was handed to the manafacture settings. I get a message that says w/installation - custom .exe (1) the orginal 266 could not be located in the dynamic link library msi.dll. What has been done what do you and how do I do to fix the problem?

    Hey bonnieaguilar,

    This could be because the Windows Installer files are corrupted registration which should solve the problem.

    To unregister and re-register Windows Installer:

    1. in the menu 'Start', click 'run '.
    2. type msiexec /unreg and then press ENTER. This cancels the registration of Windows Installer.
    3. in the menu 'Start', click 'run '.
    4. in the "Open" box, type msiexec/regserver, and then press ENTER.

    Once finished, try to download the messengers listed in your post. See if you are able to get through with the download and installation.

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for