W7 Ultimate registration problems

Similar Questions

• Satellite A50 112: registration problems

  I have a type of satellite SA50-112. When I chose to save my laptop with toshiba this type does not appear in the list. Any ideas?

  Hello

  After a few problems with the registration, I got some info from a Service partner.

  There are toshiba serveral registration Web pages. You have to find of the Toshiba site specific to the country, where your laptop has been purchased. On this site you may register your laptop.

  Another tip: If you take a look at the warranty booklet (it has been delivered by your laptop) there is a full explanation on registration!

  It should help you!

  Bye Bob

• FSX acceleration-registration problem

  I am recording acceleration X of Flight Simulation after having to remove it to get rid of a few gremlins.  When the box is poster-register now or more later I click on register now, but the box that appears to enter my registration key is cut short, cut right and down, I just see the upper part of the code I type but does not click on enter, so can not register. When I had this problem, a couple of years I had fixed by telephone by Microsoft, but they no longer do this. someone please help. Dave.

  Moved from Community Participation

  Edit: in the title 'Register' replaced with 'record '.

  Hello

  Sorry, you have not received a response yet.

  No guarantee, but by pressing the Enter key may be the same only by clicking on the button Enter off the screen.

  Change the resolution of the screen you can see the complete registration form. (Except for XP), right-click on the screen > personalize > display settings > a higher resolution will allow more content to fit the screen.

  Don

• ultimate driver problems ProBook 4530 s windows 7

  Hello

  So I had to the new installation of windows 7 ultimate on my laptop, and after many forums here fixed a lot of my problems I have still some problems with yellow sybols on drivers under the other section in device manager ive tried updating the drivers to my own staff troubleshooting forums installation drivers apparently useful but have not been able to solve the problem

  It shows as follows

  -base system device

  -base system device

  bluetooth device-

  bluetooth device-

  bluetooth device-

  -network controller

  -unknown device

  help would be greatly appreciated

  Hello:

  You need this driver for the card reader:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_116003_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Acer registration problem

  Cannot save a new office purchased through Wal-Mart. Acer does not recognize the ID series, despite several attempts and using the exact number in the AcerID folder. Have tried several times. Other responses on the forum for the registration issue show a Web site that does not work. Broken link... What is the problem with Acer? I've never met who with other manufacturers.

  Help, please. Thanks in advance.

  I had the same problem, so I wrote them a letter with all my details to register for my laptop.

  Send by registered mail.

  I also had it with Virgin also.

  Thumberlina.

• Windows vista ultimate update problem

  so I'll try to upgrade windows vista ultimate SP1, and as he begins to run, I get an error of memory pointing me to

  http://go.Microsoft.com/fwlink/?LinkId=101139

  problem is when I go, it's a dead link.

  someone had this problem?

  That's what I get redirected to when I try your link - http://support.microsoft.com/kb/947366

• I want to install my Vista in a new machine, will be what will have registration problems?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I have

  • I removed my Vista on my computer because of the lack of Vista operating system file cache, I understand that there is now a patch to make it work properly. I want to install on my new machine, my local shop said I you will encounter a problem with the registration because it's another machine. Please can you guide me. Thank you.

  If Windows Vista was preinstalled on your old machine, it is attached to this computer, and you cannot install it on the new machine.

  If you bought Windows Vista software in a store, you can remove from the old machine and install it on the new.  There could be a problem with the activation (which is different then registration).  After installation, start the product activation.  If it will not activate online, use the phone activation option and explain the situation to the person who answers.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Zoo Tycoon 2 ultimate collection-problems with disk 2.

  Hey my laptop is Asus brand and I have windows 8. I have zoo tycoon-ultimate collection, and it worked fine on my last laptop. Disc two usually run on my computer and it comes up with error 1305 error reading the file. I looked in other forums to help, but none of them seems to fix the problem I have. Can someone help me please?

  Hello

  Welcome to the Microsoft community. I appreciate your efforts toward resolving the issue. I would like to ask you some questions for a better understanding of the issue.

  1. Are able to install the game on another computer using the same disk?

  Try and copy the contents of the disc in your computer and then try to install it. If you are not able to copy the file, it could be a problem with the drive itself.

  Alternatively, you can try to install compatibility mode. After you copy the configuration from the disk file, try the following steps.

  a. right click on the driver file and select Properties

  b. Select the Compatibility tab

  c. place a check next to run this program in compatibility mode and select the operating system in the drop-down list.

  d. let the driver to install, and then check the functionality.

  If you need additional help, let us know and we would be happy to help you.

• CS 6 registration problem

  I bought the Photoshop CS6 upgrade and try to install it on a new computer that doesn't have my previous version CS5 on it.  (It has been installed on a laptop that suffered a catastrophic hard drive failure). The registration process wonder for my CS5 series # s that are not available for me because I bought the records and they are stored across the country. Any ideas on how to proceed?

  Thanks for the help, Jeff.  I contacted customer service and we have worked the problem.  I am running at the moment.

  Sent from my iPad

• Registration problems

  I tried to register my new laptop online. OK, but toward the end of the process, the site says that registration is not complete until I sent a copy of the invoice and the data of the label OR by fax the info to a given telephone number. Well, I did not write this number thinking that I would use their e-mail address. Unfortunately. the automatic response says that the address is not accept e-mails more.

  The Web site is not a phone number to contact them on registration. The email said: "there you will find also a tool for mutual assistance with the option to create a service case, should this be necessary. "Well, I couldn't find this self-help tool.

  Any ideas?

  I found the solution

  ... and how did you solve it?

• An another registration problem

  Hello

  This morning, I recorded my new L300-1 to 6, but as registration info I entered wrong email and therefore did not receive registration confirmation e-mail, as well as not news/link for extended warranty. Can we do anything? Entered e-mail was [email protected] while it should have been [email protected]

  One more thing, registration address, phone number is mandatory, but in any format (except finally simple numbers), I entered it, recording Assistant complained that phone number format was not right without mentioning what was format expected which was very annoying.

  Kind regards
  Marko.

  Which country are you?

• Hotmail registration problem

  I connect to hotmail with screen name and a password, but it will never through. Then finally says "Internet Explorer cannot display etc.."

  Hi f f t,

  ·         Since when are you facing this problem?

  ·         Did you recently change?

  You can check if this article helps.

  You receive an error message in Internet Explorer: "Internet Explorer cannot display the webpage".

  You can also post your query to Windows Live Solution Center.

  Hotmail - Windows Live Solution Center Portal

• VIXIA HFR52 registration problems

  Hi all

  I got a Six - month - old VIXIA HFR52 who shoots video flawlessly and in bright colors 80% of the time. However, sometimes the video comes out very low although my studio is very well lit. Sometimes it happens early in the filming, sometimes in the Middle, and sometimes at the end. It's almost as if someone shuts down half of the studio lighting, and everything becomes dim.

  Anyone have an idea what could cause this annoying problem?

  This is actually the second HFR52 has demonstrated this problem (I took the first return) but now it is.

  Thank you in advance and I'm shooting in auto mode.

  Doug

  drdoug26,

  There is not a mode of manual exposure on the VIXIA HF R52.  The closest thing is the program AE (P) mode, where there is an exposure compensation feature, allowing you to set an amount to lighten or darken the show if it is too much of one, but the camera still automatically selects shutter speed and openness that you continue to move the camera or the subject autour.  I think that the modification of your lighting is the best way to solve this problem in this particular case.

• Cisco 3825 + PS3 Media Server 1.20.412 + Windows 7 Ultimate connection problems

  Hello.

  I ve been to fight with my router Cisco 3825 for awhile and can't understand * beep * won't.

  If I use the Playstation 3 with Wifi, everything works allmost like a charm, works, PS3 Media Server, but I m having stuttering problems, so I tried to use the RJ45 to maximize the bandwidth of the side PS3, just channels wifi 54Mbps on HD streaming.

  On my laptop I have Buffalo Nfinity 300/n wifi adapter, so I don´twant to connect to the laptop with RJ - 45, but to use the wifi from the router to the laptop.

  So if I try to install PS3 with connection cable to my Cisco 3825, tried DHCP/StaticIP, the Media server will not work, even my Win 7 Mediaplayer will not work.

  So question is, is that modem so "stupid" that he used anything wifi road to RJ45 side?

  I can ping the same PS3 so it is connected RJ45, and PS3 goes to internet (laptop in wifi).

  The router should have the Upnp option, but if I use the rj-45, the PS3 says "Not available", Wifi, it is available.

  Any help pls?

  PS Sorry my English skills, but hey I m try.

  Hi poteroa!

  This model number is not part of the home page products Cisco. Good visit Cisco Small Business Support Community for more assistance.

  Thank you.

• I have problems getting into eprint because I had registered with aol. Registration problems.

  

  Not sure why registering with aol would cause problems when you try to create an ePrintCenter account. Have you ever had a Snapfish account? If that could be causing a conflict and you must register to ePrintCenter using the same email/password credentials that you used with Snapfish. If you are not sure, try logging on to Snapfish (Snapfish login) with the e-mail address you have tried with ePrintCenter and choose her you forgot your password. If she confirms that an e-mail has been sent to you with password reset instructions and then reset the password and uses it and the e-mail address to create your new account ePrintCenter.

  If you have never had a Snapfish account and record ePrint is a failure because it claims that the email address is already in use then you just create your EPC account using an alternative email address.

  Hope this allows you to get to market soon.