Pavilion M4C57UA Notebook: Windows 8.1 to 10 upgrade fails with an error code at the end of the treatment

Similar Questions

• Windows Update KB979482 always fails with 8007065E error code

  KB979482 fails with 8007065E error code. All other updates are successful.

  Running Windows Vista Edition Home Premium SP2.

  Here are a few excerpts from C:\windows\windowsupdate.log:

  ... ~ snip ~

  DnldMgr * updates to download = 1
  Agent * title = update security for Windows Vista for x 64-based systems (KB979482)
  Agent * UpdateId = {8D253BCE-EB56-47C2-AA58-E5D3F7173CC9}.103
  Agent * bundles 1 updates:
  Agent * {BD1DEFF4-A43A-455A-8174-6050A6010AE4}.103
  ... ~ snip ~

  Automatic update fails...

  ... ~ snip ~

  Manager of FATAL: UH: 0x8007065e: CreatePackage failed in CCbs::CreatePackage
  Manager of FATAL: UH: 0x8007065e: StartStagePackage failed in CUHCbsHandler::StageCbsPackage
  Generation of FATAL Manager: request for CBS full update with hr = 0x8007065e and pfResetSandbox = 0
  Manager of FATAL: Source of error is 106.
  FATAL DnldMgr: DM:CAgentDownloadManager:GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x8007065e.
  DnldMgr error 0x8007065e occurred when downloading update; notification of dependent calls.
  ... ~ snip ~

  So I tried to download KB979482 here:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=9622 and run it standalone.

  However, when I try this, Windows Update Standalone install displays the message"this update does apply to your system."

  I can live with that (if the message is actually true). But if if this patch does not apply to my system, then why Windows Update keep trying to install it as an update 'important '? How can I get off the list so that the Windows Update log is not cluttered with all of the failed attempts?   Finally, I ran Windows Update Fixit tool available.  He fixed a couple of things (default location, another minor config) but not this problem.

  P.S. running BitDefender 2012 if it matters...

  To answer my own question, you can reset the status of the following method KB2509997 8 download and rename the folder C:\Windows\SoftwareDistribution. It would be nice if there was a less force brute to do this, because she loses all your update story and settings, but at least it works.

• Installation Windows Vista SP2 fails with 737D error code

  When you install Windows Vista SP2 via Windows Update program, I continually receive an 737D error Code.  This error code says "Windows cannot update services and important files while the system uses them.  Save any open files, and then restart the computer. »

  Has anyone encountered this problem and found a solution?

  Thank you

  Joe Kunkel
  

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update for windows xp (KB268509) guard security fail with 0x8007F0F4 error code

  Original title: update for windows xp (KB268509) maintains a failure.  What should I do?

  Whenever my computer tells me to click on the yellow shield to automatically install updates, on & on it keeps appearing, no matter how many times I click to install & computer automatically turns off.  This has happened for 5 months now.  Today, I spent more than an hour, inquiring more (I only am not computer savvy real), signed properly, and now see that what is not install is:

  update security for Windows XP (KB268509)

  It becomes annyoying.  I have a very good security against spam & virus McAfee but nothing over the top.

  You can solve this?

  Content of the double Post
  x8007F0F4 computer continues to try to install the update of security for windowsXP (KB268509) without result - code). What does this mean & how to install?

  About the previous question, this is the error code:

  PROBLEM: always have to install update for Windows XP (KB268509) security. All other updates, never install this one.

  ERROR CODE: 0X8007F0F4

  QUESTIONS: Is it important? Should I ignore it or get to the root of the problem? I have good system McAfee Security

  PS: I'm not very savvy computer...

  Thank you

  Thank you for your response.  All this seems daunting for me and I think that I better find someone more qualified in computer science than I do what you suggest.  I'm afraid that I could make things worse.
  Thanks a lot again
  S32

• Windows Vista Service Pack 1 (KB936330) fails to install error code 80073712

  Windows Vista Service Pack 1 (KB936330) fails to install, get the error code 80073712. What can I do to reslove it? Have tried everything help section offers any avile.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366>

  UTC/GMT is 03:21 Tuesday, January 10, 2012

• Please help with uninstalling windows live photo gallery and windows live writer. I can't uninstall this from my add or remove a feature from the program. Whenever I try to install windows live essentials for xp, it fails due to errors due to the photo li

  I can't uninstall w.l.p.g. in Add or remove a program. The window appears and says "unable to find the program that created it. I think I need to remove all Windows Live completely from my computer before I can install the new windows live essentials for xp. Whenever I try to install windows live It fails.  the error for which says "hr:0 x 80070643" you have an older version of windows live photo gallery and it cannot be deleted. the version I have is 12.0.1347.0718. I was able to remove the high-end windows live essentials on my computer, but he left behind the photo gallery and Webcam live writer. I can't delete live writer either.  Please help thank you P.A.

  How to uninstall a specific Windows Live Essentials program
  http://windowslivehelp.com/solution.aspx?SolutionID=c861e66a-c839-47C4-a1d5-46b46121fb5d

  How to uninstall Windows Live Essentials (all programs)
  http://windowslivehelp.com/solution.aspx?SolutionID=64db5c80-85E4-49fe-BF07-cb08ffc5dd53

  You will find support for all versions of Windows Live Essentials uninstall/reinstalling in this forum: http://windowslivehelp.com/forums.aspx?forumid=a372972e-8e7a-4d85-adc3-a1b43e8c02ec

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows updates fail with no error code

  I reinstalled Windows as suggested, and it seems that updates are now mode as it should. I wish you to know how the virus was picked up. All my computers have the latest updates of security products.

  Thank you for your help in this matter.

  I wish you to know how the virus was picked up...

  By your computer previous on the same wire, most likely because you do not have to completely remove the preinstalled Norton free version of evaluation BEFORE you upgrade Windows XP to Vista AND you installed McAfee Antivirus Plus AND BEFORE that you have installed the Vista updates everything (including the Service Packs & IE upgrades).

  Chances are that the McAfee application ever installed or worked properly.

• Update for Windows 7 for x 64-based systems KB976264 80242014 error code

  Hello

  I use Windows 7 x 64 system. I have a problem with the "update for Windows 7 for x 64-based systems KB976264" 80242014 error code and the status "pending to be" appear next to him. I think that the update has been installed in part because whenever I'm turning off the computer there is a message "system is preparing for configuration" and when I turn the configuration but still start, it stops when it reaches 35 percent. The computer restarts and then there is another message that the configation was not successful and the changes are in return.

  I tried to install the update manually from the Windows Web page but there is always an error code that the update is not available for my computer, even if I download the version which should be compatible with it.

  Could you please tell me how to reinstall or uninstall the update not to be bothered by my computer restarts every time that I turn it on?

  Thank you

  Hanah,
  Take a look at this article and try the troubleshooting steps in this regard.  Let us know the results.  Also, check the update history and see if there are other error codes.

  You can also perform these troubleshooting beginning steps.
  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with HP Simplepass 2011 - HP Pavilion dv6 Notebook Windows 7 64 bit

  HP Pavilion dv6 Notebook Windows 7 64 bit

  I have this laptop about two years. I had have to rely on the factory affecting several times on circumstances independent-(donjon de Norton Utilities supprimant les registres essentiels). But, recently, I restored to factory setting and updated my Norton Internet Security to the latest version and everything was fine until my fingersensor stop Saw several hours after. He reads is no longer my fingerprint.  I am prompted by the software to enter my password by typing only and not in the typing and scanning. Right now my quick launch is based on numbers from 0 to 9. Can someone guide me to recover my software working properly?

  You can try to uninstall the driver and the software for Simplepass, then re - install, refer to this guide

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/HP-SimplePass-identity-protection-validity-fingerprint-and/m-p/742013

• Windows update fails on XP Pro SP3 with 0x8007F064 error code.

  Windows update fails repeatedly on XP Pro SP3 with 0x8007F064 error code:

  Update security for Windows XP (KB2661637)
  A security update cumulative for Internet Explorer 8 for Windows XP (KB2647516)
  Update security for Windows XP (KB2660465)

  Update works fine until yesterday. Microsoft tool ran (no change), reloaded Windows Update (no change), a tool for malware own virus check comes to nothing. Any ideas?

  Since it is a Dell computer, chances are a Norton or McAfee free trial is preinstalled. When you have done the clean install, the free trialware would have ALSO reinstalled (but not valid now).  Let's see if the execution of two removal tools & a few tweaks resolves the behavior.

  [You can print these instructions for reference offline. [If a step said to restart, restart! ]

  1. click right on the following link to download the Norton removal tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. right click on the following link to download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. double-click on the file that you saved in # 1 a above, to run the utility. DO TAP not your keyboard until the race ends, then restart.

  3. double-click the file that you saved in # 1 b above to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  4 start | Settings | Control Panel | Add/Remove programs. Set Program Access and Defaults: select (check) the CUSTOM [<>] configuration option, and then click the arrows pointing to the far-right | Browser: select "Internet Explorer" here (to not "use my current... »). [1]

  Illustration: http://teamtutorials.com/wp-content/uploads/2007/05/set-program-access-defaults-02.jpg

  If you return to check the out parameter #1 above, it'll be "Use my current..." "but now it's going to be"point"to IE so that you don't need to change anything or reset. [Think of it.]

  5. now check your settings here: IE tools | Internet Options | Programs | Default web browser: If the make default button is NOT dimmed, click/press it.

  6. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  7. IMPORTANT - don't SKIP THIS STEP! Open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 of => [ignore the title & symptoms].

  7B. do disappear/close the troubleshooter automatic pop - up; then...

  7 c. run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [2]

  8 restart once more.

  9. open Internet Explorer (only!) at http://windowsupdate.microsoft.com . Select CUSTOM and scan | See if you can install all the available now security updates (i.e., KB2660465, KB2647516 or KB2661637).

  -Online if an update of root certificates is listed under the category of updates software optional on the left side of the window of scan results, install it to enjoy greater security of IE8. [3]

  Tip: Do NOT install any other updates software optional or any updated material in option .

  10. in response to this post with a status report.

  Good luck!

  ==================================================
  [1] once you get the missing updates installed, do not hesitate to make Firefox default browser.

  [2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.

  [3] MS provided the distribution of a new version of update root certificates on Tuesday, 28 Feb-12. Until then, the update root certificates , released on 22 Nov-11 will be offered. MS usually new versions of root certificates update releases every 3 or 4 months.

  [Last updated - 24 Feb-12, 19:47 UTC]

• I have a Windows XP computer, I can upgrade it with Windows 7 on it?

  upgrading windows XP to windows 7

  I have a Windows XP computer, I can upgrade it with Windows 7 on it?

  On Thu, September 16, 2010 12:11:45 + 0000, Robin2010 wrote:

  I have a Windows XP computer, I can upgrade it with Windows 7 on it?

  # You can use the Windows 7 Upgrade version, but you have to make a
  new installation with it.

  Ken Blake, Microsoft MVP

• Pavillion23: Windows 7 will not be updated. I get error code 800706F7.

  Windows 7 will not be updated. I get error code 800706F7. I removed the update painful KB304394, which of course still blocking updates, earlier. Since then, I find in the history of the update that almost most of the windows update attempt failed.  (A couple for Windows Defender succeeded). Now, when I try to install an update manually, I get the 800706F error code.

  This is what Windows Update tells me on the article that I tried to install:

  Update for Internet Explorer 11 for Windows 7 for x 64-based systems (KB3025390)

  Download size: 190 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  Install this update to resolve problems in Windows. For a complete list of issues included in this update, see the Microsoft Knowledge Base article for more information. After you install this item, you may have to restart your computer.

  More information:
  http://support.Microsoft.com/kb/3025390

  Help and Support:
  http://support.Microsoft.com

  Yes, I have same problem of yours, I've finally updated all those win updates, now that I started some bloggers advice what to do to solve these problems. I actually had a problem with a crash suddenly and blackout of screen and other unusual tracks on this desk, until the February MS cannot install updates. what I've done, I've tried the [FSC.exe] System File Checker, see him through YouTube "how to use FSC,"... Solved problems of 100%, but it depends on the number of files that can not be repaired, my results are minor just repair corrupt files... Try it...

• Failed with unknown error 80070490 Windows Update

  Update Windows guard fails with unknown error 80070490 when trying to install to install the important updates made automatically by Windows Update. Having this problem since February 10

  http://support.Microsoft.com/kb/958044

  'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

  Method 1: run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information on how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
     947821 (http://support.microsoft.com/kb/947821/) Description of the system update tool for Windows Vista, Windows Server 2008, Windows 7 and Windows Server 2008 R2

     http://support.Microsoft.com/kb/947821/

     Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  2. Try to install updates again.

  Method 2: perform a Windows repair installation

  If method 1 does not resolve this problem, you must perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  See you soon.

  Mick Murphy - Microsoft partner

• 57 a error code during the installation of Windows Update KB2598290

  Windows downloding this update, but allow to install this update

  57 a error code during the installation of Windows Update KB2598290

  Options-

  1. let your office product installation media in the drive and try to install the update.

  2. try manually download and install the update: http://www.microsoft.com/en-us/download/details.aspx?id=29770

  3. repair Office and try to install the update.
      http://support.Microsoft.com/kb/924614

• When you install windows vista service Park 1, I have received an error code 80073712 with 13% downloaded only?. Can you help me to complete this process?

  When you install windows vista service Park 1, I have received an error code 80073712 with 13% downloaded only?. Can you help me to complete this process?

  Hi Gore EzekiahTongun

   

  You can see the steps in the below mentioned article Microsoft and verification.

  http://support.Microsoft.com/kb/947366

   

  I hope this helps.