Regression to XP Pro

Similar Questions

• Satellite Pro C70-A-159 boots white screen (or almost)

  A non-technical friend asked me to look at his Satellite Toshiba Pro C70-A-159.

  It was a Christmas gift and worked perfectly for eight months two days ago (according to him), he won t boot. Actually, it does, in a screen with no connection options to stop / restart / activate on screen keyboard etc. (reading these forums, is not an uncommon problem).

  Safe mode works very well, even with the network. Restore points three last system (one at a time) declining makes no difference. CHKDSK (at the DOS prompt) reported no problems. Gas station (in safe mode) won early that it is perhaps corrupt please reinstall or restart. I put t know how to do the first (and am not sure it s a good idea unless I know it will solve the problem), rebooting makes no difference. Start with logging or debug might be useful if I knew where it connected to!

  I suspect it has improved to 8.1 from the Microsoft site, no Toshiba. Before making a full backup of the data, regress of Windows 8 and follow the (fairly complex) instructions for upgrading to 8.1 properly, is there anything else I can try?

  Hi Adrian

  I also think that you should test the functionality with the factory settings. Talk with your friend and ask if there is some important data saved on his computer. Make a backup and install original recovery image.

  Here's the brief description - http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm
  What you can do too before start you is to create recovery media, just to be sure you if something goes wrong. You can create this preinstalled use Toshiba recovery media creator support.

  Reinstall the original recovery image and check a bit how it works. You can improve it later to Win8.1.
  Here is page s Toshiba on the steps how to do this - http://www.toshiba.eu/innovation/generic/windows8_1-message/

  I think that your friend will be happy when you do all that and bring him back 100% of work and Win8.1 machine.

  Good luck

• Meeting place for Dell 8 Pro + Windows 10 + No Sound Drivers OK

  Does anyone else have a problem with their coming 8 Pro?  I have upgraded to Windows 10 and everything seemed fine, then a few days ago the sound has stopped working.  The sound icon had a red in the taskbar as if 'X' cut and I couldn't turn on the sound.  The scroll bar does not, even on the physical switches.

  I unloaded the driver and rebooted and it seemed to accept and had no errors in Device Manager (I tried both later and regressed to a previous version of the driver... no luck).  The slider bar has worked and it was reactivated without doubt.  I did a test in the sound setting menu, and he reported that he was unable to play.

  So I did a factory restore Dell Windows 8 and the sound is back.  So good, it was not a hardware problem.  But we have all found their fair will stop working on Windows 10 (worked great for a few months now)?  I don't have my heart set to level my meeting place for 8 to 10 Windows because everything I do on this machine is to surf the web, but I think it will be a possibility.

  This true isn´t at all. I found a workaround. I downloaded the Dell booth 8.1 Windows

  

  then I went to the Device Manager and clicked on both devices under "Audio - video - and Gamecontroller" the names of these two devices are 'Intel ESS Audio Device (WDM) and "IS2 Realtek Audio Codec".

  

  Do right click go to properties and chose to update the drivers

  

  Choose "desktop search".

  Choose "from the list.

  Choose "install device".

  

  

  Now search for Drivers for Win 8.1 in the cabin - you should probably remove it with software like 7zip

  '5830-win8.1-A06-KY92D.CAB\5830\win8.1\x86\chipset\PKVD4_A05-00\Drivers\Audio\ '.

  Here you can find the files INF. choose them, install it and restart your computer. Do the same for devices stand in Manager.

  After that, you can see two drivers if by clicking on choose in the list as in the screen above. Ensure that you have chosen the one of 22.11.2013.

  Now you should make it sound now, from time to time, it is necessary to reinstall the 2013, but it works fine for me now.

  In constance. His important force windows to use this old pilot, only try to install a new and chose that an older version causes windows always using the new driver for windows 10.

• Why is 'Edit in Audition' greyed in Premiere Pro and After Effects?

  Since the launch of CC 2014 option in Premiere Pro and After Effects to 'Edit in Audition' is grayed out. Right-clicking on a clip in Premiere Pro is not an option for hearing. I can't send my compositions, sequences or clips to Audition for audio editing. I contacted Adobe Support staff earlier this evening. They suggested to go to my Mac system preferences and allow the root user, log out of my account, connect to the root user, stop and start in safe mode. None of these scenarios worked. He is always grayed out in the two user accounts.

  Is this a known issue? I even uninstalled and reinstalled the hearing. Still nothing. All my Adobe apps are updated. My Mac is updated. Yet once, never had this problem before.

  I'd appreciate any help!

  Thank you!

  See you soon,.

  Evan Lockhart

  I may have an answer for you, but do not know if my resolution will work for Macs.

  First of all, here is my system and the initial info. I use a work computer, OS is Windows 7. I've just upgraded to Adobe CC 2014 a week ago, and I also uninstalled previous versions of all my programs creative cloud after installing new versions (CC 2014 is not simply to update the previous version, it installs a new program and does automatically uninstall previous programs of CC). Not sure whether to for this resolution to work the uninstall.

  In any case, after I installed first Pro CC 2014 and 2014 CC hearing, the Clip edit in Adobe Audition command was available in the Edition in the Menu bar menu, but has been disabled in the context menu to the sequence (for the context menu, it was visible, but gray and disabled). When I tried to use the command in the Edit menu in the Menu bar, he gave me a dialog box fill and it has created a new folder (called "Adobe Audition to Exchange"). So, the command, when selected from the 'Edit' menu has obviously uses a different process from the command in the context menu. Anyway, I didn't want a new record created, or to fill a dialog, I wanted to just behave like he used to. In fact, when I right click on the sequence and select Edit Clip in Adobe Audition on the shortcut menu, it just opens the hearing and the audio waveform is visible.

  I was able to solve this problem and get the right click command works by reading a few articles on this same issue of Adobe CC (not CC 2014) and those to help understand how to solve this problem in Adobe CC 2014.

  Here's what I did:

  • I had to find my .sesx files in my system. They are NOT in the same place, as they were for the previous version of the CC (at least, they were not for me). I had to use the command search and find extensions of .sesx to locate.
  • Found under the path C: > users > Public > Public Documents > Adobe > hearing > 7.0 > model Session. Note that (for me), there is a folder called 6.0 at the same level as the record of 7.0 . I selected the 7.0 folder this folder contained the most recent set of files of .sesx. I checked the folder 6.0 and those are the .sesx of the previous version files, so I deleted this folder as a cleaning step.
  • I clicked on one of the. sesx files in the folder Templates of Session chosen then Open with on the shortcut menu. The Open with dialog box displays and provides a list of programs.
  • I selected Adobe Audition CC 2014 of the list of programs (you may need to browse to find it) and always use the selected program to open this type of fileselected. I then clicked on OK to submit the order of configuration and close the Open with dialog box.
  • I rebooted first Pro CC 2014 and the Clip edit in Adobe Audition command is now enabled in the context menu and worked properly.
  • I cried with joy... OK, not really, but I'm still peeved at ridiculous regression errors and lack of extensive testing of new versions of the software, so I'm glad the frustrating problems.

  Don't know if this will help you, or if you already solved your problem. Whatever it is, good luck!

  ~ Jim

• Locate the temporary workspace on a MacBook Pro

  Hello-

  I have a MacBook Pro bought recently which has been partitioned in Mac OS and Windows. By running software on the Windows side, I realized that I don't know how to locate the temporary workspace on this machine. In other words, on a Windows PC, there are files named 'Local Settings' and 'Temp' in which is placed a temporary storage.

  Where are their analogues on a Mac, how are they appointed and how to find them?

  Thank you

  Thomas

  Under/Users, there is a directory with your name. There is a whole/private directories, which are usually used for temporary work space. Is there a specific reason/question looking for files/directories?

• MacBook Pro display problem

  Hello members of the community.

  As of recently, I have noticed some glitches when feeding on my MacBook or awakened from his sleep.

  The colors are distorted, usually with pink, green, or yellow blobs. Blobs cannot entirely replace the colors, they appear to be contained in a element would normally be. For example. the menu bar will be partially pink and white, but pink does not leave the menu bar in this area, and the Office has green lines on it.

  I tried to take a screenshot, but the problem resolves in about 20 seconds, but it's a recurring problem.

  It happens when I wake up, connection or not. I had also certain powers serious and problems of performance, such that my MagSafe LED would not illuminate when plugged on rare occasions, fan could turn unnecessarily, graphics performance were SUPER slow, and the health of my battery was running out quickly. I actually ran a report on the system at 2 different times and my quality of full load is depleting of 1.2% per charge cycle, which is very worrying. I went from 6281 mAh mAh 6138 maximum capacity after two cycles of load. I'm tracking closely it because at this rate, my battery will survive only at load cycles about 150 instead of the 1000 expected, gives me the idea that this could very well be a bad battery. The computer is also warm to the touch while you sleep, not connected to the power supply. I NAP active but even taking into account should not be hotter my iPhone did the same thing.

  I have reset the SMC, and it solved a couple of problems. The charger works fine now and my performance improved considerably (which made me feel better, either it is a high-performance laptop, a 11-inch MacBook Air should not he surpass), and battery life has improved. I feel even if it uses a lot of power in his sleep. Maybe I need to turn off the NAP and see if that makes a difference. The graphic bug still persists however, and I don't have enough time to see if the max battery is depleting again.

  In regards to the bug, is there something that can be done? Basically, I want to assure you that I took all appropriate measures or if someone else has this problem to see if it can be software related instead of my computer.

  I have the entry level MacBook Pro with the retina, last generation.

  Any constructive contribution welcome!

  See you soon.

  -adreaux

  Hello bernardn753,

  After reviewing your post, it seems that you are having problems with the screen showing strange things on it. Looks like you already have a troubleshooting. I recommend you read this article, as reset NVRAM would be to reset your screen resolution settings that should help.

  How to reset the NVRAM on your Mac.

  Thank you for using communities of Apple Support. Good day.

• QuickTime Pro 7 has been interrupted?

  Hello

  I use my QuickTime 7 Pro license in the OS X El Capitan! Can I use it in macOS Sierra?

  The latest version is 7.6.6 I use in El Capitan? Will not be updated more or been discontinued?

  Thank you

  You can continue to use your current QuickTime QuickTime 7 Pro key, but no new ones are sold. Nobody on these boards to know if there will be future updates to the version of QuickTime 7 Mac OS X.

  (145173)

• removed the audio tracks in logic pro can be restored

  removed the audio tracks in logic pro can be restored, has been save logic & empty folders to the folder came, I deleted the originals by mistake...

  Not if you don't have the original audio files on your hard drive.  If you have deleted original, your only hope he then restore from a backup of your system, you have a.

• Sierra and MacBook Pro

  Sierra runs very slowly in my MacBook Pro. All applications take a long time to open.

  A few simple things first:

  -clear the NVRAM (now restart until you hear the chime a couple of times, and then release the command-option-P-R keys)

  -reset the SMC

  -start in Safe Mode and start again normally

  If this doesn't produce any improvement, download and run Etrecheck and post the report here.

  Most often, the problem is a software conflict caused by programs that were not updated to run in the current version, or by the user who installed an antivirus or "cleaners" that cause all sorts of problems.

  The report will let us know what software is running and should give a clue as to what is the cause of the slowness.

• MacBook Pro USB Ports

  MacBook Pro my keyboard and wireless mouse work in my usb ports but I can't mount drive flash sticks? Do not display in the finder, but will be blink in disk utility then disappears?

  Flash drives show in disk utility?

  In the Finder > Preferences > sidebar > devices is verified external drives?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Can a Mac 2012 Pro accepts a HD 5 to?

  I'm considering buying a Player 5 TB Western Digital Black Hard for my Mac Pro, model mid-2012. I wanted to know if anyone has one of these large disks, and if the Mac Pro accepts such a disk size?

  I'm running OS X 10.11.6 on a 3.2 GHz Quad Core Intel Xeon Mac Pro mid-2012.

  Thank you.

  Yes, but you may need to get one of these: https://eshop.macsales.com/item/OWC/MPRODBKTLG6/

  I installed a 6 TB drive in my 2010 Mac Pro using one of these. I don't know if the 5 TB drive would have had a problem with the sled drive standard Apple or not. If you are looking for Mac Pro discussions, you can probably find previous discussions of what changes in big readers cause the standard hardware does not work.

• Problem downloading images of the iPhone pro mac book 6 more

  I have always been able to connect my iPhone to my MacBook Pro, raise iPhoto on the MacBook and import pictures and videos from my phone.  I know having an iPhone 6 Plus and for the first time when I connect the phone to the MacBook, it was clear that the pictures and videos on my phone were not all available at importation.  I still see them on the phone and I did updates and put both turned off and restarted, but I don't see them as being able to import.  I see some but not all.  Any suggestion?

  Hello Bwalk76,

  After reviewing your post, it seems you have trouble downloading pictures and videos on Mac.  Looks like you already have a troubleshooting.  I recommend reading this article, it provides a few other ways that you can get photos for the Mac.
  
  

  Use iCloud library or My Photo Stream

  If you enabled iCloud photo library on your Mac and iOS, your photos may be device already on your computer. Follow these steps to check your photos in pictures for OS X. You can also go to iCloud.com and open the Photos app to see your entire library and select the photos to import.

  You can also use my photo stream to access your photos on your computer.

  If you cannot import pictures from your iPhone, iPad or iPod touch to your computer - Apple Support

  Thank you for using communities of Apple Support. Good day.

• WHY MY MAC at the BEGINNING of 2009 PRO 2.66 GHz Quad - Core Intel Xeon will NOT IMPROVE in SIERRA

  WHY MY MAC at the BEGINNING of 2009 PRO 2.66 GHz Quad - Core Intel Xeon will NOT IMPROVE in SIERRA

  Your signature says you're running snow leopard 10.6.4. If this is the case you must update to 10.6.8 in order to get the Mac App Store:

  Mac OS X 10.6.8 Combo Update v1.1

  You will need to upgrade to El Capitan until you can upgrade to Sierra:

  https://iTunes.Apple.com/app/OS-x-El-Capitan/id1147835434?MT=12

• MacBook Pro not mounting external hard drive

  My Macbook Pro (early 2015, running Mac OS Sierra) is not able to mount my [new] external hard drive (Seagate Backup Slim). It shows up in disk utility, but the volume seems shady. Nothing happens by pressing the command mount or performing first aid. Kindly help me out here.

  Hi vishesh97,

  Welcome to the communities of Apple Support!

  We understand your question that you have a new external hard drive, a backup Slim Seagate, which does not appear when you connect to your MacBook Pro.

  Allows because it is a new hard drive, try to clear the disc first and formatting for Mac OS extended (journaled). The instructions for this process are found in the article below:

  For Mac disk utility: delete a volume using disk utility

  See you soon!

• How to unlock my book mac pro with my watch i

  How to unlock my book mac pro with my watch i

  The watch must be update shows OS 3, and MacBook to macOS Sierra.  Then go on the MacBook in settings-> Security & privacy-> and select "Allow Apple Watch unlock your mac".