Regular.easeIn / Strong.easeOut: this should not be to far right?

Similar Questions

• Since the (all updates) update yesterday, I find one inactive (used only for vpn) network adapter waiting for DHCP Ip address. 1 minute. This should not happen.

  This adapter (or should I say windows) should not ask an IP address until it is in use. There is no difference if I disable it in Device Manager. I get the following error (ID 1001):

  Your computer not was not assigned a network address (by the DHCP server) for the network card with the address...    The following error occurred: 0 x 79. Your computer will keep trying... Since the server (DHCP).

  The MAC address is the MAC address of my "virtual" network card

  In the meantime my physical network adapter does not work. It seems windows is just to wait a response "who will not to pass" a DHCP server which unless I launch the VPN software is simply not going to work.

  I suspect that it is the result of an update that should not work this way.

  Any suggestion is welcome.

  Thank you.

  I would just add - it may be important for long-term understanding of the issue. In network connections, the VPN arrested projected map (still there in Device Manager). I see only the physical card. After removing both and reinstall the two becomes visible. The previously hidden map (vpn) becomes visible. It was not until the physical adapter has been reinstalled (logically). Personally, I have no idea why this I messed up. There should not be.

  Best regards, Dave.

• I have 'hidden' bot aciddentally top a bottom of menu bars. Now I don't find ANY source on how to 'show' If this should not be among the bases?

  Up and down had the icons and the information that I use, of course. It should be clear how these are masked and not masked, while I spent a ridiculous amount of time trying to get in all sorts of items 'help' and can't find anything. Very frustrating

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Command + SHIFT + F).

  • https://support.Mozilla.org/KB/how-to-use-full-screen

  Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible.

  • View > toolbars (Linux, Windows: press F10 to display the menu bar)

  Use the toolbar (Customize) to open the Customize and set the toolbar to display items.

  • If the missing elements are in the toolbar palette then drag them from the window, customize the toolbar
  • If you do not see an item on a toolbar in the toolbar palette and then click the button "Restore default" to restore the default toolbar configuration

  You can check the problems caused by a corrupt localstore.rdf file if the above didn't help.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• When opening a file that I have to choose what program created to run and some files is read only this should not be and wont open, usually of .exe files

  This started after I tried to remove the gel frog via the control panel. After that this withdrawal, or if he asked me to choose a program to run a file I tried and I hit adobe and adobe is now the icon like any and will not open most of the files because it does not support, I can not open almost nothing except the browser explore. I was able to get my malwarebytes to come and showed some virus that I removed, but now I don't know how to solve other problems

  Looks like your Windows file associations have to dispose. This means that XP doesn't know what to do with files by looking at the file extension (.exe for executables)., .doc for MS documents, etc.  When you run Internet Explorer, it's a little different, that's why IE usually still works fine...

  If you don't have it you, something done for you - most likely malware.

  Go to this site WWW by Doug Knox:

  http://www.dougknox.com/

  On the left, click on the Win XP fixes, file Association fixed and read the instructions at the top of the page.

  Download the EXE File Association Fix on your desktop, unzip the file and apply it by following the instructions at the top of the page, then to restart and test.

  Run the following scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

• My favicons are not showing for all of my favorites as well as some current bookmarks imported and when I opened the topic: config it says "browser.chrome.favicons; false." If this should not be true, and how to change?

  I had to rebuild my computer and when I imported all my favorites that they had no favicons. I started to receive some of the favicons when I go to the websight that he reconnect, but now I can't seem to see any of them. I did a Google search and a tech site suggested the subject: config file and that the 'browser.chrome.favicons; false' must be set to true. But when I switch to true and restart Firefox is once again set to false. I know, it doesn't seem much, but it's very annoying to not have the favicons.

  Help me Obi Wan Firefox you're my only hope.

  The browser.chrome.favicons preference must be set to true, as it is does not have the value when you restart Firefox, see the article How to fix preferences that will not save for possible causes.

• My Dell with xp has all the sounds. Sometimes I will leave and then it will come back on. However, not as strong, as it should be. The lights on the speakers are

  My Dell with xp has all the sounds.  Sometimes I will leave and then it will come back on.  However, not as strong, as it should be.  The lights on the speakers are

  Try:

  1. pair an inexpensive connection of headphones in the speaker of your DELL outlet and see if the problem improves.
  2. connect your Dell speakers to another compatible audio device to verify that the speakers are not defective.
  Also visit:
  http://support.Microsoft.com/kb/307918
  Caution:

  Absolutely no warranty express or implied is delivered with this post.  The poster will be held not responsible for any physical, mental, emotional, or financial loss resulting from the use of suggestions or information contained in this message.  Entities who follow the advice in this post are at their own risk.

• Some junk mail I receive should NOT go to spam.  How can I fix this?

  I have an iMAC.  Some mail goes in junk mail, which should not be undesirable.  How can I fix this?

  control-click or right-click on the message and select Mark as "not junk".

• I can't track of the railroad on this version of Google Earth. Should not show with "roads" audited?

  I can't track of the railroad on this version of Google Earth. Should not show with "roads" audited?

  Hi, Urbisoler,

  This is a question for the forum Google Earth

  https://groups.Google.com/a/googleproductforums.com/Forum/#! Forum/Earth

  Google groups - railway

  https://groups.Google.com/a/googleproductforums.com/Forum/#! $20 Searchin'/Earth/railways

• Need to activate printing background colors and images, but this is not where it should be in the options/tools/int adv tab. Any ideas?

  need to activate printing background colors and images, but this is not where it should be in the options/tools/int adv tab. Any ideas?

  Try the following. Open IE11, click on the tools, mouse over the option 'Print' option and select "print preview

  

  Select the layout, as shown below.

  

  Place a check in the "case print the background color and images.

  

  Click on the OK"" button.

  J W Stuart: http://www.pagestart.com

• When I want to install the converter file for DownloadHelper my McAfee security says that the site contains viruses and malware and me should not go on this site

  The warning comes from the "save to file" from the installation file. Should I ignore it? I just had a big problem with a scam ransomware blocking system, so I'm really sensitive.

  Note that there is generally no need to use such a converter because a lot of media players can play flv and mp4 files as well.

  If you do not then you can look at VLC.

  • http://www.videolan.org/VLC/

  There should not be a problem with the converter used by the Video DownloadHelper extension

  • Video DownloadHelper: https://addons.mozilla.org/firefox/addon/video-downloadhelper/

• Can I correct an error in the E-mail address if it's on an e-mail I want to convey. If this is not feasible should I use an email in the file sent as an attachment. towards a new w/o typing on?

  Email has been sent, but not received because an error in the address. A long email that I didn't retype wholw thing, so I just he returned by transfer. I thought it was because of bad weather in think Oaklahoma (tornadoes week before) has no verification of address once again, as I had in my contacts section & knew it was good. Finally, after two attempts, I realized that 3 was absent from the address - so not complete. It is saved in the sent file, but when I tried to correct the address on the original. I couldn't do it.  If this is not possible even to send thw wholw e-mail as an attachment to another which would have the correct address. I do not know how?

  Its very easy to do.  One way is to highlight the message and then go to the Message. Send as an attachment.  Or you just create a new message and drag the message to the folder above the new message then it will work.  You can also copy the message on the desktop, open it in Notepad and add this line:

  X sent: 1

  to the header of the message, and then save it then click on it to open it and it will open as a new message not sent with the same text as before.

  Steve

• My computer guard direct me to the Windows Startup Repair loop. Is this a virus? If this is not the case, what should I do?

  OK, here's a little history:
  When was surfing the Internet (using Mozilla Firefox), he froze and said that he "did not." Then I left the computer alone for a good 15 minutes, but to realize that nothing happened. From there, I decided to disconnect the computer to see if I can re - open Firefox. But when I tried to connect it back, the computer take me on the desk. It was stuck at the screen that says 'Welcome' (the form that appears after clicking on your user name) in the end, I turned off the computer by holding the power button, because there was nothing I could do. When I turned on the computer a few minutes later, it was time that I met a huge problem.

  The problem:
  When I turned it back on, a black screen appears that gives you the ability to boot your system with a repair on your computer, or start normally. I chose "start normally. After that, it took me a blue screen with a window that says "Startup Repair". He began to scan the computer saying «attempted repairs...» "When I saw this, I turned immediately shut down the computer, thinking it was some sort of virus that pretends to fix the computer. Nevertheless, I decided to turn it on for the second time. Of course, it's the same thing. But this time, I allow the scanning process to complete. When it was over, he said that the system could not be repaired and advised me to contact Microsoft, with my "contact information." I took this as a red flag, and click Cancel. I suspected it was an attempt to identity theft. (Though, I could be wrong, of course.)

  Honestly, I don't know if if there is indeed something wrong with the computer or if it's a virus.

  I tried to find out by going online and looking for solutions. From there, I tried a method where you press F8 several times until the Advanced Boot Options go up and selected "Last known Configuration" that did not work. I also heard on the "chkdsk" method, but I don't know how to do and there is no guarantee this will work.

  After that, I did more research and realized there were several ways to solve this problem. But when I went through the tutorials, the steps have been very confusing to me. I felt like most of these tutorials aimed computer technicians or people who knew in fixing computers. The steps were so confused until I found myself referring more questions than real answers!

  So now I'm reaching out to help, and I really need! It would be greatly appreciated! I really don't want to format all my data.

  Please keep in mind that I am a lover of computers operating. The two programs I normally use are Mozilla Firefox and Microsoft Word. So please don't be assuming that I know my way in and out of a computer. I'm no where near, in every sense of the term, an 'Expert '. If you can, I would like a simple, easy to follow, simple tutorial, step by step, which is not turned to professional users. Still, I am not very competent in operating computers.
  

  Hello

  You have tried yet.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

  p.s. If the message is genuine, please read this:

  The startup repair options are provided with a large number of systems of operating pre-installed.

  If this does not work, please read this

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

• Is there an app Golf GPS for the Apple Watch series 2 which is "native" to the watch, in other words, should NOT be tied to an iPhone on the golf course?

  Is there an app Golf GPS for the Apple Watch series 2 which is "native" to the watch, in other words, should NOT be tied to an iPhone on the golf course?

  Hello

  You can find this app of interest:

  • PING
    • https://iTunes.Apple.com/us/app/ping/id440740108?Mt=8
    • http://www.Ping.com/about/insideping.aspx?ID=21779

• The part 'From' the display of Thunderbird should not be transparent.

  Transparent bar mail, it is difficult to locate the gap between the header of the e-mail message and mail lists above the header of the e-mail message. The part 'From' should not be transparent. This is a recent problem, does not appear in the old version

  32 version was released and the issue is resolved, so it was a bug in Thunderbird. Thanks for your help. I'll mark this as resolved.

• Since last week, when I have several windows open in firefox, the pages back and forth between windows open by themselves. This does not happen when I use tabs instead of windows, however.

  window 1: gmail (example only)
  window 2: facebook for some company (example only)
  I will review my email and the screen suddenly changes the Facebook to say P & G for example.
  If I tab1 as gmail, tab2 as facebook P & G, it won't happen.
  And it only happens in Mozilla Firefox. When I use IE, that's fine.

  What Windows platform should not make a big difference. The screenshot may appear as coming from an older version of Windows, but the basics should be the same.

  If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

  • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
  • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes