Reinstall the drivers c3180 after malware attack

Similar Questions

• HP Pavilion Touchsmart kept Sound disappears after installation and reinstalling the drivers

  I have a HP Pavilion Touchsmart 14-B132TX Sleekbook. My sound disappeared while I was using it a month ago. I called the HP Hotline and Technical Support told me just uninstall it from the Device Manager and when restarted, automatically installs the driver. What I did.

  The sound came back but still once he disappeared after about 15 minutes of use, so I called tech support again and they gave me links to HP support for drivers to download and install which I did and rebooted the computer and the sound came back again. BUT again, the noise has disappeared. I called tech support and they just do a system restore which I did and the sound came back again. But he disappeared again after all just 7 minutes of use.

  These are the drivers, I installed from the HP Web site: sp60642, sp64082, sp60464 and sp64031. After reinstalling the drivers. I cleaned my laptop with CCleaner and went to HP Support Assistant in the hope of getting a solution, there was a statement here to download the QUALCOMM Atheros driver and I installed again the driver said... The sound has come back after rebooting. AND again, he has disappeared after just using the laptop for about 3 minutes. (it gets worse!.) This laptop is quite new, he just bought 10 months ago. What is going on? Please help me. I use the Windows 8 operating system. PLEASE HELP ME.

  Hello

  Try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  Recovery Manager - Windows 8.

  Kind regards

  DP - K

• Code 39 - video card driver. already tried to reinstall the drivers several times.

  Suddenly, I lived this issue one day after having had a normal life with a new video card.  It was quite well until you restart the next day, where he then reports in Manager device which:

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I am completely puzzled, as I have:

  -If she had problems with drivers-free work provided by the CD the initial day of the installation,
  -A tried several installations of:
  (a) CD drivers provided by.
  (b) latest driver from nVidia.
  (c) later twist driver Xtreme-G.
  (d) to allow Windows Update to install the drivers.
  -Also attempted to return to the old video card and using [compatible] drivers for it, but it returned code 39; This video card, I had no such problems with in the past.

  The first noticeable symptom has been toggled off Aero and the resolution to 640.  I am unable to run several games/etc. as the video card is automatically disabled "because he has a problem.  My graphics card is an ASUS 240 512 DDR5 ENGT, and the old one is eVGA 9400 GT; my OS is Windows 7 x 64.   The first time using the map with this computer, it was compared with the time 3D games Vantage / real and proved to be stable and functional order.

  I can't do a restore with the drivers, or have no system restore points.  Everything is fine and I can still watch videos (assuming that the CPU is handling); I can also run games like Starcraft, which I suppose doesn't require DirectX or anything that requires a dedicated card.

  I tried the sweeper driver as well as the General uninstaller, and he still refuses to acknowledge the drivers - this was done after a full withdrawal of all components of nVidia ("NVIDIA Drivers", PhysX and NVIDIA Control Panel); However, I saw again the nVidia control panel in the Panel of the menu start (no uninstall programs and features). my steps were:

  (1) Uninstall using programs uninstall,
  (2) secure using mode driver sweeper,
  3) reset, once again in SafeMode to aid driver sweeper,
  (4) restart, install the drivers.

  Of this, I was successfully able to disable the generic automatic installation of drivers window; later, I was able to install the video drivers.  However it still does not.  The Control Panel also continues to say, "Now you do not use a screen attached to a NVIDIA GPU", and Device Manager reports code 39.

  I'm running out of ideas, so I'm looking for outside help for this problem - I appreciate any information you may be able to provide.

  Check the programs and features (and memory), I can say that I have nothing else that the drivers installed for the new video card.

  I reinstalled the drivers for the 9400GT when I was testing to see if the replaced card would fail, and he gave the code 39.

  Thanks for your comments.

  EDIT: The problem seems to be fixed after a reinstall of Windows.  I give my thanks to both of you for the effort.

• OfficeJet 4652: Difficult to reinstall the drivers for OfficeJet 4652.

  What I did was I uninstalled your, smart photo software and it took out the drivers. When I try reinstalling the drivers software says that everything is installed all but the HP update and the intelligent software photo infamies. I tried pretty much everything you can think off.

  Oakey-dokey. The work of uninstalling, the framework has not been installed correctly, and I have not noticed.

  Let me explain what I did:

  1. Uninstalled Photo creation, which has removed HP desktop icons and stop the printer works wirelessly. Not Cool...
  2. So now I took everything, so I thought that I did. All related files, registry entries, the image files and deleted the folder printer and Device Manager. This has been done with all, Regseeker and OORegEdit. "Third party software to a few ' widows is great. : ). Anyway.
  3. Reinstall the software. And to my surprise all the software I thought I removed except photos creation was still installed, at least that's what showed on your Setup.
  4. I think my problem was, (because before I decided to try HP, I've installed and uninstalled the software once or twice), once more a windows problem.
  5. Problem: I tried to get my laptop to recognize the printer via the Control Panel, the devices and printers. It does not work. It isn't that I went through "Windows Settings", 'add devices and printers' work.
  6. In any case greenturtle, thank you. For as far as I'm concerned this problem as another Windows. Perhaps the year 43 or 44 years a charm.

• My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers. What should I do now?

  My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers.
  Convenience store said to click on properties Insert the diskette and
  Double click on open, but when I do that it stop computer
  and opens the recovery and ask for a correct diskette,

  Hello Tallm,

  Thank you for your message.  Did you get your floppy drivers of your installation diskettes?  If so, go to the website of the manufacturer of your computer and download/install the latest drivers.  Please let us know if this or help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion dv6-6c13cl: what order I reinstall the drivers, the hardware and software?

  I had to reinstall Windows 7 on my Pavilion dv6-6c13cl.  I would like to know how can I reinstall the drivers, software and hardware?

  I tried to reinstall yesterday and I could not restore internet connection with Wifi.  Your help would be greatly appreciated.

  Thank you

  HH1238

  Hello:

  Here is the link to the ethernet driver on your laptop support and driver page...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102406-1&cc=us&DLC=en&LC=en&OS=4063&product=5218506&sw_lang=

• No Audio output device is installed, the Code 10 messages after reinstalling the drivers

  I try not to cry on computer problems, but this one really has me in tears.  NEED HELP from the COMPUTER GURUS: PC with Vista Home Premium SP1, Toshiba Satellite U305-S5077, Realtek High Definition Audio V. 6.0.1.5473 is the most recent update audio driver.
  I started to receive messages "No Audio output device is installed", but the sound is always back to restart. At work this morning - now it doesn't. Also The Sound, video and game controllers tab disappeared from the list of device completely Manager so the Realtek device showed is more upward.  : O
  A ran a diagnosis of Toshiba.  Next to his it read: No.
  And I went through the control panel and found 'Add the material legacy' reinstalled the Realtek driver. Now it says it is installed but you can't download the software updates. "This device cannot start - Code 10" is the message.
  Been working on it since 10 this morning, trying different things on different techniques for one, without success... until now.
  Help?

  Hello

  I suggest you follow the link and check.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  I also suggest to run the system restore date when it was working fine.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• How to move a local network printer without having to reinstall the drivers

  Hello

  Is it possible to change a printer to a network printer on a local printer without having to reinstall the printer drivers?

  The computer on which the printer (a Lanier LP116c PCL 5 c) is currently connected [directly] is running Win XP.  It is a stand-alone computer without any connectivity; network, internet ect.   He has no printer drivers installed because the computer had been connected to another computer by using working groups and was able to print at the Lanier through working groups.  But now that there is no longer connected to the 'network', but rather directly connected to the printer, it will not be printed.

  I tried to change the properties of the driver to "tell the computer" that the printer is now connected directly however when I try to open the properties I: "printer properties cannot be displayed.  The print spooler service is not running.

  How to 'know the computer' that the printer is now connected directly without having to reinstall the dirivers?

  Thank you!

  Carrie

  You have two questions.  One is assigning the correct port for the printer and the other is fixing what is originally the print spooler service to not run.

  As much as I can give you guidelines on how solve the second problem, it will be much easier for you to uninstall and reinstall the printer (once the print spooler works again) that in order to create a "USB virtual port" which is what needs to be done unless the computer was once a printer connected by USB is installed.

  Often, but not always, an order print spooler is the result of a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If you have ever had (but retired) a Lexmark or Dell - badged Lexmark printer installed, the command "net start spooler" to step below may fail.  In this case, type the following line in the black command prompt window and then type the command "net start spooler" again:

  dependent on the spooler of sc config = RPCSS

  Note that there is no space before the =

  If still no joy, use the alternative method that is linked below.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.

  Alternative to the method of his first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

  Once the print spooler has started, click Start > printers and faxes, right click on the Lanier printer icon and select properties and select the Ports tab.  If you already have a USB connected printer installed on this computer, there should be a port named USBnnn.  If there is, check the box and OK your way out and your printer should now print when connected by USB.  If there is no USB port listed, then do the reinstall as explained in an Article.  The driver install package available here should create and install the USB port for you: http://www.lanier.com/downloads/driverFrame.aspx?path=http://support.aficio.com/bb/html/dr_ut_e/lan_u/model/c30e/c30een.htm

• Can't reinstall the display device after you have uninstalled due to the blue screen.

  As I said, my display has led me to get stop the blue screen I believe because I tried to update the driver for my laptop screen it is so using secondary TV monitor via VGA black.  I thought that the driver update would fix it but I got the dreaded blue screen.  Now im thinking im going to uninstall to reinstall the driver but no luck.  I should have listened to the little voice in my head, trying to tell me NOT to try it on my own, but I thought ID try   UH a little help... Please?  Thanks in advance.

  Bobby U.

  Hello

  Make and model of the computer?

  Go to the manufacturer's website and install the latest chipset drivers, and then try again to install the device driver.

  Doc from Sony on the installation card driver

  http://www.Sony-Asia.com/support/FAQ/270823

  Is there a display error code in Device Manager?

  What is the error you receive?

  It locate dump files in c:\windows\minidump

  Download the file to your account of OneDrive (formerly SkyDrive) and post a link back.

• How can I reinstall the drivers from NVIDIA?

  I'm getting an entry missing windows\system32\nvcpl.dll nv starts, I tried to restore to an earlier date, but which did not help.

  I think I'll have to reinstall the NVIDIA drivers. but I don't know how.

  Hello

  Step 1:

  You can check the link below to remove the old NVIDIA drivers:

  http://forums.nvidia.com/index.php?showtopic=16154

   

  Step 2:

  Try to install the latest driver updated from the link below:

  http://www.nvidia.com/download/index.aspx?lang=en-us

  Hope this helps,

• How do I reinstall the drivers for the printer to windows vista Home premium

  original title: How do I reinstall the driivers from printer to windows vista Home premium

  my hp 3900 series drivers are corrupted, the HP site says just the drivers are loaded in the Vista operating system, I need the driver and do not have the disk for my printer HP Deskjet 3940.

  Consider asking your question to HP - software and drivers forum

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-and/BD-p/software

• Acer Aspire, Windows 7, cannot access the internet or reinstall the drivers? How can I fix?

  I uninstalled the driver realtek audio, and then I lost everything. Windows doesn't detect any hardware on my device. Nothing seems to work now

   
  [Moved from comments]

  Hi Mickey,

  1. What is the brand and model of the Acer laptop?
  2. Have you tried to check if the device is detected in Device Manager?

  If you have access to the mouse and the keyboard please try the following steps:

  Method 1:

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Run the tool and troubleshooting hardware devices

  Method 2:

  Use Device Manager to find the hardware changes.

  Note:

  Use Device Manager to find the hardware changes. After your computer search the hardware changes, it can recognize the USB device connected to the USB port so that you can use the device.

  To check the hardware changes, follow these steps:

  a. Click Start, type Manager of devices in the search box of start and press ENTER.
  In Device Manager, click on your computer so that it appears highlighted.
  b. click Action and then click Scan for hardware changes.
  c. check the USB device to see if it works.
  d. restart the computer.

  Method 3:

  Download the drivers using another computer by visiting the manufacturer's website save it to a location external (USB key) and then install it in the computer in question.

  Please post back with the State of the question.

• Reload the drivers (USB) after reboot

  Hi guys,.

  As much as I know windows 8.1 keeps drivers loaded during hibernation or shutdown of the machine.

  This allows a quick start after the computer startup - no need to wait until all drivers (USB among them) to be reloaded.

  However, the reboot of the machine, it is not valid.

  Is it possible to make it valid? Or how can I load drivers by myself?

  Thank you

  S.

  Hello

  Please contact Microsoft Community.

  I understand that you are looking for a way to keep all the drivers loaded devices even when you reboot your PC. As it does in standby and hibernation.

  Standby mode and ensures extended the system does turn off not all device drivers keep loaded is why he opens with a single click.

  But while the stop or restart the PC all logon drivers, device drivers in language of lay that machine completely disable turns off completely, so it is not possible to obtain all the drivers loaded in one click, it will take time.

  Hope this information helps.

• HP G60-630US notebook: Wireless Connection disabled - how do I reinstall the drivers for my wireless card?

  I think I accidentally uninstalled my drivers for my wireless card in an attempt to "clean" my PC of the programs that I use is no longer without realizing that it was a crucial driver I needed for my wireless connection.

  Where could I go to find the drivers to download and also how would approach I re - install the necessary drivers for my wireless connection?

  Thank you.

• My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers. Now what?

  Floppy drive read only not the disks.

  Hello Fishface1977,

  Thank you for your message.  If nothing has changed on your system, recently, to include hardware, software or updates?  Also, have you installed the drivers that came on the CD with your system or you download/install the drivers the most recent of the website of the manufacturer of your computer?  It is recommended that you download/install the drivers provided by your computer manufacturer's website.  Please let us know so that we can better help you get this issue resolved.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.