Reload the drivers (USB) after reboot

Similar Questions

• RN204 not reconnect the USB in the port back after reboot.

  I don't know if that's a problem, but my new RN204 unit will not see my USB stick after reboot. Key, I inserted into the lower back USBport. Port superior return I got UPS. Inverter is connected ok after reboot.

  If the USB is in front of USB port, unit connects OK after reboot. Rear ports, I have to go out and re - insert USB stick after every reboot. Key is detected and mounted after rehabilitation only. (connected external storage device.)

  USB drive is Kingston USB 3.0 and my RN104 unit detects that it restarts after all in backport more or less right. (after a reboot it tell me automatically (connected external storage device.))

  FW on the two unit (RN204, RN104) is 6.4.1 - T35, tested on 6.4.0 and 6.4.1 beta 1-2 - all the same.

  Hi all

  After you install the new version of FW 6.4.2 (Final, published today), everything looks OK. My RN204 unit reconnect all the USB key, that I tested.

  Everything is OK, the Bug disappeared. I think that FW 6.4.2 is the solution to the issue being reported.

  Thanks Netgear.

• Alienware 14, dysfunctions of the screen after the idling or after reboot - drivers?

  Hello

  I have an Alienware 14 I had probably more than a year before, so I'm probably out of warranty now. Fortunately, this problem seems less to do with all the problems of hardware and some weird stuff going on with drivers.

  What happens is that after the screen becomes inactive, or after I restarted the computer, the screen goes wonky.  It flashes green (or cyan) and purple lines across, with the upper part of the screen on the bottom.  If I restart the PC often enough, then possibly screen returns to normal and works perfectly fine, no matter how long I keep active to screen.  But then when I have to restart my PC or make it become inactive, I have the problem all over again.

  Here is a video that I could find on Youtube that shows an approximate example of display problem and recovery solution:

  http://www.YouTube.com/watch?v=eaqRaqBqwog

  This issue started to happen to me in mid-November, after the tool of pre installed nVidia (GeForce experience) prompted me to update my nVidia drivers.  Comments on this video, youtube and other topics like the following, all this seems to be a questionable issue with an update for nVidia drivers.

  en.Community.Dell.com/.../19610218

  I tried to restore my GPU driver in September 2014 published version (344.11) and that seems to fix the problem for several reboots.  Then a few hours later, I tried to restart, had the same screen problems, and my GPU driver reverted to the version of 18 November 2014 (344.75).  I don't know that I have the nVidia tool configured to not the automatic update of the GPU driver.

  (I don't know if it's related, but when I used http://www.geforce.com/drivers to detect version, Firefox had forgotten that he was authorized to execute Java.)

  Is there something else, maybe in the OS (Windows 8.1), which is auto-update the driver GPU?

  Is there a way that you can have Windows to stop updating your drivers:
  I think this might solve your problem.

  Here is a tutorial on how to disable the Windows updated driver.

• The computer hangs after reboot cold.

  I just bought a HP Officejet AIO 6310xi. After several tests the OEM package will install not (installation failure). From the Web site and out of the CD/DVD included.

  I let MS-Vista install drivers and at least the printer works fine until reboot. Then the system freezes upward. Once I have turned the printer off and restart again the computer starts no prob. I have 6300 drivers and suspect that the drivers are up-to-date and incompatible with MS Vista. My computer is only a year old and during the inspection of the hub USB the draw appears in the settings (below 500 mha).

  The cable is less than 9 feet long. I have enough computer resources including backbone RAM and HD space.

  Is there anyway that I can get Vista drivers for this printer only without going through an arduous process for a long time?

  Any advice will be appreciated.

  It seems that the USB driver are to blame. But after I re-installed the new drivers of hub USB the computer always freezes the re-boot. It is not the most recent, I have found yet. The bios does not seem to be a problem because it is a Dec 2006 re - build. I guess it's a matter of waiting until the USB hub drivers are updated.

• need the drivers usb 3.0 for Pavilion 15-e013nr windows 7

  Hello, I have recently downgraded from Windows 8 to 7 on my Pavilion 15-e013nr. I can't find the drivers for the USB 3.0 ports. Also, I was not able to find a driver for graphics card for the AMD Radeon HD 8350 G came with the laptop. One of these drivers available for this product and the operating system out there? Thank you for your time Justin

  Hi, Justin:

  You must first install the amd chipset driver and restart. You want the first file on the Web page.  Who will install the smbus controller.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  Then to the graphics driver, you can try this...

  Download but do not run the driver beta amd from the link below.

  http://support.AMD.com/en-us/download/mobile?OS=Windows 7-64

  Download and install the free utility 7-zip file from the link below.

  http://7-zip.org/

  After installing 7 - Zip, right-click on the beta amd graphics driver you downloaded, select 7 - zip, and select it to unzip the file in a folder. I leave decompress the file name, so it's easy for me to find.

  After do you, go to Device Manager, click to expand the category of display cards, click on the standard VGA, click the driver tab, click on put to update driver.

  Select her browse my computer for driver software method, then click on let me pick from a list of drivers for devices on my computer, and then click disk.

  Access the AMD beta driver folder 7 - zip created\$ _OUTDIR\Packages\Drivers\Display\WB6A_INF\CU165580, and select the AMD Radeon HD 8350 G graphic card in the list and the driver should install.

  For usb 3.0:

  Install these two drivers:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118744_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• myRIO time restores default of the ignition system after reboot

  Hello guys,.

  I have the following problem.
  I measure the tension on each analogue input. The measurement starts after starting the appliance myRIO, while time system of myRIO device resets the time default system. But the measures are useless without a good timestomp, containing real time (day, month, yearh, hour, minutes, seconds).
  Is there a possibility for the device myRIO start with real time, or that unit myRIO has time while turned off. (perhaps someone knows the external devices which can be connected to the USB myRIO to get real time)

  Greetings from the Germany

  Dimasaur

  The myRIO has not shipped for the real time clock battery, so the time will be reset with each power on.

  You can set the date and time on the myRIO using screws on the target System Configuration, so all you need to do is to find somewhere that timestamp and assign once myRIO Boote.

  Here are a few options:

  -If you have a HOST VI connected, send the timestamp for the myRIO from your PC

  -External battery series/I2C/SPI supported RTC chip/module that you can connect to the myRIO. There is an example here.

  -A GPS module provides a very accurate timestamp as part of its NMEA data - could you one until the myRIO e.g. via Serial hook

  -The information of the network timestamp (for example a time server SNTP or by making an HTTP request - the timestamp is usually returned in the header information by the server or you might find a web service that provides information 'current time')

• Reinstall the drivers c3180 after malware attack

  My desktop computer running Windows 7 Home Premium SP1 64-bit has been affected by malicious software that does not appear to have an impact on my Photosmart C3180 all-in-One. I run the HP Solution Center and get this screen:

  

  When I clicked on the link to update Flash Player, I received this warning from my antivirus program:

  

  After the execution of analyses, the workarounds and suggested corrections, I finally just uninstall HP and Flash Player and try the road to reinstall both from scratch.

  Having a problem reinstalling the drivers of HP. I go as far as this screen with the full range of HP and then stop:

  

  Then I tried just for the C3180 Photosmart basic drivers but I have a warning saying that my OS is not supported, even if I downloaded the drivers for Windows 7 64-bit.

  Any suggestion would be appreciated.

  I'll give it a go and let you know if it succeeds. In the meantime I use MS Paint for scanning and the work of the printing option. Comes to be done without the HP Solution Center. Thank you

• Fail of the Ethernet Driver after reboot

  Hello

  Model laptop T400, TYPE 6475-K22

  After restarting the laptop I found yellow colour mark (!) on driver ethernet in device manager.i reinstalled two or three times, is not taking the ip address of the dhcp server, if I give also manually it will not work. I plugged a USB stick to the converter, his work's LAN adapter. What will be the reason for this? is it a hardware problem or a software problem?

  Thanks in advance.

  Thank you

  It was a software problem. Its winxp pro operating system. There was conflict between the network driver and audio driver. First of all, I uninstalled the driver of network and reinstalled the latest version but did not work. Then I uninstalled both sounds and reinstalled again network drivers, now his work has begun. I don't know why its implementation contradiction? It's the second laptop im facing the same issue.

• Cannot depend on the virtual machine after reboot

  Hello world

  Thanks for reading this post.

  My version VM ESXI4.1.0, 348481.

  Here's my problem:

  One day my VM was hanged, and I tried to restart.

  After the reboot, it can be turn on. And I tried to remove the inventory and to recreate the virtual machine.

  However, I can't find the. VMX file in the data store.

  So I tried to create a new virtual machine and put the files in this folder, but it can also work.

  Please see the capture screen, (http://clip2net.com/s/2aNUG)

  Could someone give me guidance and advice how to solve?

  Thank you very much.

  According to the latest vmware.log file, you have tried to access one of the files base/flat with a wrong header file (40 GB)! This hopefully not bad data on the virtual disk. In any case, I've recreated the missing files (see attachment), so you should be able to redo the work of the virtual machine. Because the vmware.log file did not help, I've recreated the instant chain according to the timestamps of the delta file.

  Please follow it below mentioned steps exactly to avoid problems in case something does not work as expacted:

  • Make sure the flat files as well as files 2 6 delta are still in place (not renamed,...)
  • remove the virtual machine from the inventory of the host (right-click-> "Remove from inventory") ESXi
  • delete the temporary/second .vmx unless there is a special need for it
  • Download the files from the .zip file in the folder of the virtual machine on the data store
  • Click right newly downloaded virtual machine's .vmx file and choose "add to the inventory.
  • create a new snapshot (this is important!)
  • Turn on the virtual machine

  If something is not or you have questions, please send back before moving on to the other steps.

  If everything works as expected you should consider the 'Delete All' snapshots in snapshot Manager. This will release not only almost 200 GB of disk space, but can also improve the performance of the virtual machine. Because the size of the snapshot, remove snapshots may take some time, probably in hours!)

  André

• Clock disappears from the menu bar after reboot

  Every time I reboot my MacBook Air, I manually activate the clock in system preferences.

  I don't think that I never turned it off via commands from the terminal or other.

  Could be a corrupt plist, delete this file systemuiserver.plist

  Find here from Finder > go > go to folder copy and paste:

  ~/Library/preferences/com. Apple.systemuiserver.plist

  Terminal copy / paste:

  Killall SystemUIServer

• Windows Server 2012R2 - network location awareness continues to change the public domain after rebooting

  I also have this problem but I have domain controllers that are NOT part of this Hyper-V host.  If I restart the network location awareness (which also restarts the network list Service) it goes back to the field as it should.  Now when I reboot this server it will be once more put the interface / network to the public even if this Hyper-V server has been successfully joined to the domain with a static IP address.

  Now for clarification.  This Hyper-V server is NOT yet configured virtual.  The only thing that has been set up is a NIC team with two cards on Board (LAN 3 & 4 ports) and two additional network cards four port card (ports 3 & 4).  Local network connection is dedicated to LAN Port No. 1.  We also have a dedicated of the IMM port for access to the Strip.

  The ONLY time I can get this server to restart and STAY in the 'Domain' location is now if I have the PORTFAST enabled on the switch port to which it is connected.  Yes, we use STP here in our company.  This is not the first time that I had to do this, but it seems not just as a colleague claims that he didn't need to do and its technology Hyper-V server restarts fine.  I him have had check it out and he sees no difference between its servers and mine.  Still mine restarts always in the "public" unless I have active portfast.  Any thoughts?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Try to connect to the Windows screen after reboot, but the name of user and password is not not qualify all of a sudden.

  I just set up my home network with multiple computers and point of access, by using the same names and passwords that I had the original computer.  When I stopped and restarted, I was invited with a different message box appearance request my username and password.  I tried all the combinations of names and numbers, I've never used throughout this life and past lives, I've gone through, all without success.  I tried to reboot in safe mode, manual start with a drive, but this window keeps popping up.

  __________________________________________________
  UGG boots
  uggs

  No password is required, just leave it blank!

• Test server tries to use the old IDs after reboot etc.

  I have just formatted my drive and installed fresh xampp, pulled my web files on the net and got the testing running server.  I can access the pages that use my vidiscript DB, but for some reason when I try to access pages that use the same PB it gives me an error of:

  Access denied for user 'deafboyz_admin'@'localhost' (using password: YES)

  deafboyz_admin is the OLD username for DB, that my remote DB uses, which is painfully different than the testing server.  I updated the DB file and saved and made sure it's correct on the test server.  Restart xampp and even my computer, deleted history of cookies etc and still get this same error.  It makes me crazy b/c my main homepage must use the db file for data and it works perfectly, but video pages it attempts to use the old credentials, which are not loaded in my test server.

  as a solution, I even added the user deafboyz_admin in the db and gave full privileges, reboot, etc and still no luck.

  all my passwords are loaded into the local Database as they are in the file db.  restarted the computer and clear the history, what else could be possibly originally xampp try using the old db details?

  Thank you for your understanding!

  There is always something that connects your video to a file that is trying to connect to the DB by using the credentials of the old. You can share your PHP code with us login script? Also, check that the connection on the video page setting is correctly set in the correct file that contains the new credentials.

• iMac froze on the Apple logo after reboot

  IiMac frozen after that restart with progress bar stopped at Midway

  No need to post your question more than once. Please see my response to your other post.

• easy transfer can be used to reload the data files after formatting hard drive?

  I have been informed by level microsoft 2 I have to reformat my hard drive to fix the problem with windows backup (snapshot won't work).  easy transfer will copy all THE data files, including OUTLOOK 2007 on hard drive and then I can reinstall on reformatted drive.

  Easy transfer copy some things but not all things. He does more that can make a simple copy/paste (such as the settings for example) but, for example, not programs transfer (those who need to be put back in place).  Here is a description of what it does (and does not): http://support.microsoft.com/kb/928635.  It will transfer Outlook 2007 PDF files and other personal data if they are selected - you need to know which files you need and where to select them - but it won't transfer the program (which must be put back in place).  It must be run before you reformat the hard disk to collect data and then you can transfer everything what you have registered once the system is re-installled.  You would do the re-setup prior to the transfer.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.