Reinstall the network driver

Similar Questions

• How to install or reinstall the network driver. Cannot use this computer for downlosd it

  My computer to work together a new computer for me. It is impossible to update the drivers do for worksheet. It has taken the to do. You will need to update to install or reinstall the network drivers. How it's done. I can't use this computer to download, due to the fact that it a work computer.

  You must go to the website of manufacturers of network cards and download the proper drivers.

  I hope this helps.

• Reinstall the network card, but there is an error code (31)?

  Hi all! This is my first time asking in this forum so please guide me if I make mistakes.

  I use a Dell Inspiron laptop n5110, and recently I had problems with my wireless internet connection. Most of the time at halfway then I am browsing or buffering videos, my internet would simply cut all of a sudden and it goes to show that its connected, but there is not internet access/no access to the network. Sometimes, it just goes to a network not identified without internet access.

  To resolve this problem, I accessed my disabled device manager then activated my network card and the internet reconnected instantly. However, it was not a permanent solution and the same problem has occurred over and over again, sometimes in succession. I called the guy in charge of my internet and I doubt it's a problem on their side, so I thought it would probably be a problem with my network card.

  I uninstalled my network card and reinstalled, but now I can not connect to internet at all. Nothing shows up on my list of connections available now. The only reason why I am able to ask this question is because I'm using my iphone usb hotspot.

  I checked my network card and it shows "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) ». I hope someone can help me with this. Sorry for the long post as well, I just thought that some of you will want to know what happened before.

  Hello

  Welcome to the Microsoft community!

  I really appreciate your efforts to solve the problem and provide us with the required information that will help us troubleshoot and fix your problem.

  As the error code says, the question arises if the device driver is corrupted and Windows cannot update the drivers for the network card. I suggest you refer to the solution recommended for Code 31 has been provided in the following Knowledge Base article:

  Error codes in the Device Manager in Windows

  In addition, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  According to the error code, I suggest you run the troubleshooter devices & hardware and check if it helps.

  Open the hardware and devices Troubleshooter

  If the problem persists, try the following method.

  Method 2:

  Uninstall and reinstall the network driver from the Dell support site.

  Step 1:

  (a) press the Windows key + R.

  (b) type devmgmt.msc in the run window.

  (c) expand the network adapters in the Device Manager list.

  (d) right click on the concerned device driver and click Uninstall.

  After you have uninstalled the driver, proceed to the next step.

  Step 2:

  Download and install the latest driver from the following link network.

  Drivers Dell Inspiron 15R (N5110, Early 2011)

  Note: Select the Windows 7 as the network and operating system under article of the category.

  Check whether the problem is resolved.

  Additional information:

  Wireless and wired network problems

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Reinstall the network card driver

  I am running Vista and recently I started having frequent loss of internet connection.  I discovered that if I disable and then re-enable the network driver, that she would work for a while.  I thought that I should reinstall the driver, so I uninstalled.  Now I can't understand how to reinstall.  I'm assuming that the driver I need is part of Windows, but when I tried to use the Vista CD to install the driver, I couldn't find in the list of drivers.

  Thanks for your help,

  peterson85

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot connect to internet after a reboot before you uninstall and then reinstall the network card. (After the upgrade to Windows 7 from Vista)

  This problem started immediately after the upgrade to Windows 7 Ultimate (32 bit) to Windows Vista Ultimate (32 bit).  Again, I want to remind that I never had this problem before installing Windows 7.

  -After a reboot, I am presented with the impossible to connect the network indicator (yellow triangle with!) in the task bar.  (It was how I was welcomed after the installation of Windows 7 is said by the way).

  -The only way I found to regain connectivity is to uninstall and reinstall the network via the device manager card, date at which the computer always successfully connects and remains connected until the next reboot.

  Network card: Realtek RTL8168C (P) / 811C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20)

  Driver provider: Microsoft
  Driver date: 14/05/2009
  Driver version: 7.2.1127.2008
  Digital signer: Microsoft Windows

  Thus, we have solved the problem! There are two possibilities of your problems:
  1 company Adobe uses the Bonjour service , this service should be disabled.
  Computer > Manage > Services and Applications > Services => find the bonjour service (sometimes stated as long numbers), stop service and if the Disabled value. It works!

  2. If it is not signed as Bonjour service. Try to disable the service:
  Shutdown mDNSResponder .exe (he is represented by # Id_String1.6844F930_1628_4223_B5CC_5BB94B879762 #).

  It is installed with Adobe software. If you upgrade the Vista, it will generally many users problem!

• My computer has virus of the FBI, I wiped it is clean but now it cannot connect to intermet because it can't find the network driver how can I find it?

  My computer has virus of the FBI, I wiped it is clean but now it cannot connect to intermet because it can't find the network driver how can I find it?

  Since you have formatted the PC and reinstalled Windows, your question will be handled better in the hardware forum space and drivers for Windows 7, so I'll move it there.

  Apparently, you need to install the driver of your PC network. If you used the CD to restore the PC manufacturer that should have been included, but it may be on a 2nd CD with drivers and programs.

  If not, the first thing to do is contact the PC manufacturer to see if they have a driver available for download. If the PC has a wireless network card and wired, perhaps one has been configured, but not the other and you try to use the not yet detected and installed.

  -steve

• Windows 7 try to reinstall the printer driver

  I have 2 Configuration of desktop computers to share the Hp Deskjet F4480 all in one. The printer is connected to a desktop computer running Windows Vista. The other desktop computer running Windows 7, this is the one with the issue. Whenever I have restart it or restart it, a windows pops up saying windows Installer configuration, I clicked on cancel and the same message came up saying that could not find f4400.msi or no access to the network drive.  I looked in msconfig under Startup and couldn't find something that is related to the installer.

  Interesting, looks like there is a loop that keeps past fires. I would recommend first of all that we do a clean uninstall / reinstall of the printer.

  First of all, if you use a USB cable, be sure to remove it. Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.

  The START menu type "%temp%" and press on ENTER. Here, I want you to press Ctrl+A and press on REMOVE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.

  Follow this link to download full feature software and drivers of the printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=3742086&

  Install and let me know the result!

  Have a great day!
  

• Can't deleted iPhoto Library the network drive backup

  I made a backup of my library iPhoto on a network drive. Since then, I realized Time Machine made a better job of backing up my iPhoto library. So I planned to remove the library for free space.

  When I try, I get this message:

  "The operation cannot be performed because you have not granted access to some of the elements."

  If I can spend in the library and digging around, I find there are hundreds, maybe thousands of articles where I don't have permission. Y at - it a way to replace that can simply remove the library?

  Which does not imply iPhoto somehow - maybe you can get help from the forum for your operating system, but most likely, you need support from the supplier of the network drive - this is the question is

  I would ask that your post moved to the captain El forum and see if some one can help

  LN

• Cannot access the network drive or impossible to mount the network drive. Error "network path was not found.

  Original title: network path was not found

  HI, after the upgradation from windows xp sp2 to sp3 (next to the customer) I can't access the network drive or impossible to mount the network drive. ' ' It showa error "network path was not found.

  Hi gauravadavadkar,

  Thanks for posting your query in Microsoft Communities. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  ·         Work on a domain?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with networkand check if the problem persists.

  S tep 2: if the problem does not persist in safe mode with networking, perform a clean bootto see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the steps to configure Windows to use a Normal startup state section of the article to start the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  In Windows network connection issues

  You can read this article for more information:

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• Vista Home Premium cannot perform backup on the network drive

  Fairly well described in the title... asks for a password. no password required on each pc. Seems to be a known problem based on the messages I've seen. Is there a fix. ???

  Unstable1

  Thanks for posting on this Forum.

  What applications do you use to make your backup?  You use the Configuration and status of the backup program that comes with Windows Vista or the backup center and restoration?

  Is it a home network?  If so, all computers have the same name of "workgroup"?  As you may know, the same name of user and password must be on all systems that are part of a working group.  You are able to "navigate" to this network drive?

  If the network drive (part) belongs to a Windows domain, make sure that you have the appropriate rights to write to this drive (Share) network. Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to get permission to write to the network drive access?

  I installed a reader Networks to connect it to my router. It works very well for retieving files, but I can't write to it. I get a message saying "You must." authorized to perform this action

  Samsung computer laptop brand new, 6 GB RAM, CPU Intel Sandy Bridge, E4200 of Cisco router wireless.

  Everything works fine, except my network (3 sheets) drive. I find it impossible to write to it in WIndows Explorer. I can, however, open any type of file off the drive.

  I want to back up my computer to the hard drive, so please HELP!

  Hello

  You can check out the link below and provide a complete control on the network drive.

  What are the permissions?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-permissions

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

• Store music on the network drive?

  I am considering a Director to play my music (mp3) stored on a shared network (NT) drive library. The Director can access music stored on the network drive and not on a PC? I don't want to have the PC on when I listen to music. The media to be installed and running server software need a PC for the Director to work? or the Director can access \\DRIVE\DIRECTORY?

  Thank you.

  Ah, so you're saying the multimedia files are on the USB drive connected to your WRT610N? If so, then you don't need a computer or power from the router itself already has a built-in Media Server (Twonky Media Server), which can share the multimedia files on the USB drive to your network.

• My laptop is windows vista basic 32-bit, can't reinstall the CD drive

  Original title: reinstall the cd drive

  Hi, my laptop is windows vista basic 32-bit, I had a problem where I had to reinstall the cd, I installed the operating system, but can't seem to reinstall the drive.when reinstall the cd drive witch no have topress f2 or f12 thank you, wendy

  Hello

  1. what happens when you try to install the CD player?

  2. you receive an error message?

  3. you try to install an external CD/DVD drive?

  4. you try to install the driver for the DVD drive, or the drive itself?

  See the article mentioned below:
  Installing new hardware: recommended links
  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-new-hardware-recommended-links

• Access to the network drive. Unable to drag files to USB

  I can see the files on the network drive, but when I try to drag the file to a USB drive it. He said that problem access the hard disk, but I can open the file on that...   Any ideas would be appreciated

  Hello

  1. What is the exact error message that you receive?

  2 have you tried copier\paste manually?

  I suggest copier\paste manually the files on the USB drive and check to see if the same problem happens.

  You can also check this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

  It will be useful.

• To remove the error message about the network drive

  I have W7 Home and recently restructured.   I had this problem of reformatting finally a long time ago and it is solved but do not remember how.  Whenever I boot, I get the message "connection impossible network drives.  When I click it, I see the Epson printer has a red X on it and says Epson memory card.  The printer has always shown in my computer, but it works very well.  All I need is to get rid of the error message.  I tried to go into the center of the Action and unclicking on error messages of network firewall but that did not help. I'll print on any solution this time for the next restructuring!  Thanks for any advice.

  Epson support says that since the printer connecting wireless much later that opens Windows, Windows is not see when it starts.  They say that it is a Windows problem, not them.

  To get rid of the error message, I disconnect a right-click on my computer and clicked on the network drive.  I find the error message disappeared and the printer works fine.  I don't know if there's a problem with that.