Reinstall Windows Vista 32-bit

Similar Questions

• Internet worked well until I have Reinstalled windows vista 64 bit, now my Internet does not work, says that I don't have a driver from the Internet.

  Internet worked well until I reinstalled windows vista 64 bit on my Dell laptop, now my Internet does not work. Went into Device Manager and there is no network adapter. I tried to reinstall the driver that came with my laptop disk but it doesn't seem to work, says that I need an updated driver. I don't know what else to do, I have to install a new driver from the Internet? Ugh becomes very frustrated!

  http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• After reinstall Window Vista 32 bit, I can't move the slider to increase the resolution of the screen, how do I solve this problem

  My Dell Inspiron 530 sudenlly crashed, I could not start it. I called for the support of a group that I paid for. Technicians helped me start the PC, but they could not fix the screen resolution: in the display settings window, the cursor is on the left end of the bar, the low position and could not be moved. The technician finally asked me to save the folders files and reinstall Windows Vista. After the relocation, the screen resolution problem persisted. Technicians then reformat the HD, then reinstall Windows Vista again, the result was the same. We cannot change the resolution. Help, please.

  Hello Selim,
  
  I suggest to update the drivers for graphics cards and drivers from the chipset from the manufacturers Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection
  Troubleshoot monitor and video card
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

• Reinstalled Windows Vista 32 bit on my 64-bit computer. Does not detect not NIC

  I was running a Windows 7 on a 64-bit computer. A Lenovo Thinkpad, due to some strange reason, that my computer has started to slow down and suspended. I ran all kinds of tests to see if it was a virus, but the computer is clean as a whistle.

  I decided to reinstall the operating system to see if it was a HARD drive problem or just software. I couldn't find my windows 7 ultimate DVD so I installed the Vista 32 bit and it works fine. The only problem that I face, it's that his does not detect does not the wireless network card. I went to control panel > Device Manager > network adapters and can't find LAN options.
  I'm sure that the wireless adapter exists because I used it for more than 6 months.
  Is there a way to fix this?

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  It will be useful.

• Can I reinstall Windows vista 64 bit with a product key.

  Original title: Switch system

  I have a 64-bit Windows license and the product code on my computer. Caused by a virus I took it to a repair store. Back in the Properties section it now shows as a 32-bit system and is included in the new product code the letters OEM. Can I reinstall the original 64 bit system using the product code? If I do I risk reinfecting my system with the virus? It is common for repair shops to install another operating system?

  Original title: Switch system

  I have a 64-bit Windows license and the product code on my computer. Caused by a virus I took it to a repair store. Back in the Properties section it now shows as a 32-bit system and is included in the new product code the letters OEM. Can I reinstall the original 64 bit system using the product code? If I do I risk reinfecting my system with the virus? It is common for repair shops to install another operating system?

  Take it back to the store and get it repaired, or give back yo your money.

• I tried to reinstal window vista 32 bit and I got the message as the status Ox0000017.

  My computer stopped booting because while I was in mode chkdisk I pressed the ESC key. Then trield to reinstall windows, but I could not. I have the startup options on the screen but none of them work it out. so please help me solve this problem

  If you have problems with the recovery of the manufacturer of the computer media, you will need to contact them.

  It is their software/recovery process, not Microsoft.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If it is a Microsoft Vista DVD you use, here's a guide to do a clean install:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• Windows Vista 64-bit stuck in shutdown

  I had to reformat my hard drive and reinstall Windows Vista 64-bit. After he had several updates to my machine same day. The next day, there were several more updates downloaded, and after those, I got a problem when windows is stopped, it never ends. I have to force a stop down by pressing my power button. Is two questions - there a fix for what I can do? does anyone know what update was responsible for this where I might be able to uninstall the update? I thought to go in and uninstall all updates pushed the second day, but do not know if that will cause more problems or not. I heard about what is a problem for many people. This is the first time I had this problem.

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Reinstall Windows Defender 32-bit of Windows Vista Home Premium

  I uninstalled Windows Defender computer laptop home premium from Windows Vista 32 bit and this cause the activation of VOLUME to be EMPTY and the speakers may not work. I am able to hear mobile through audio jack.  My question is how do I reinstall WINDOWS DEFENDER, I tried to do, but I get feedback as we can't do to install WINDOWS DEFENDER?

  Hello

  There is no download for Defender to reinstall it in Vista.

  It is part of the Vista operating system.

  You can try this method and do a repair upgrade installation:

  If you don't have a Vista DVD from Microsoft, you can borrow one from a friend and do a repair upgrade installation.

  Recovery disks have normally not these repair options.

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• HP HDX Windows Vista 64 bit laptop with error 1002 of the recovery process

  Hello

  I have laptop HP HDX which had a sound problem with message of error "Could not play the test tone", tried in several ways by online suggestions and ended to reinstall the new copy with recovery disk. As part of the recovery with a reovery of HP drive, I tried to get it back and it formatted boot partiion and got this error message "error 1002 if the problem persists, please contact HP support. My laptop is out of warranty now.  I talked to HP support and they ask me to buy new drives recovery and someone in this forum mentioned that recovery disk will lift the same mistake and we would need to purchase technical support and even that has not worked for soembody after paying $ 200 to support. I am struck with recovery of the laptop now. I also tried the recovery partition revovering and gave rise to no luck.  I'm now out of warranty.

  I am really fedup with bearing on my this laptop windows vista 64 bit HP HDX laptop problems. What is your best suggestion for me to recover my windows vista now?

  Thank you.

  GK

  I ordered the drive to restore HP for $ 16 and I have no problem in my OS with this disk recovery. Recovery partition that came with my laptop had this error 1002 and he really tortured than me. It is recovered successfully with this new disc of recovery with on all issues.

  I would have saved a lot of time, would not have had any stress and restore ($16) if HP disks price had built the free bug recovery partition.

  I'll be very careful in buying HP products in the future.

  Peace out.

• Where can I download a. ISO image of Windows Vista 32-bit (full edition)?

  Hi all

  I have a real installation of Windows Vista 32 bit Ultimate edition.

  I would like to install my copy of Windows in a virtual machine, but this usually requires a new PRODUCT KEY get updates etc.

  In an attempt to solve a problem in the host machine, I want to do it on a temporary basis with a "clean to a virtual machine installation.

  I know how to recover my product key, even though I have lost my disk of Vista that I bought.

  Download an .iso image of Vista 32 bit Ultimate from Digital River or at all Please?

  Failing the above all I can do is try to hunt for my original disk and reinstall and lose all my programs installed.
  The other option is to back UP everything on a temporary basis, try what I try
  and then recover all if my experience isn't a success.

  Original title: Microsoft Virtual PC question regarding the installation of Vista.

  Hello

  There is no available from Microsoft Vista ISO file download.

  You can borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• System Recovery Options - no operating system listed, need to load the drivers, but don't know where to find this (Windows Vista 64-bit)

  It is a gateway M6866 laptop running Windows Vista 64-bit.

  The computer does not start up--gives "BOOTMRG is missing" error at startup.  I'm trying to boot from the 64-bit of Windows Vista recovery disc.  I clicked on the "repair your computer" option, and it shows the computer loading files.  Then the "System Recovery Options" box appears and asks me to select the operating system to fix it.  The problem is that nothing has listed.  It is said that if your OS is not listed click Load Drivers.  I did, but it is said to insert the device installation media, and then click OK to select the driver.  I clicked on OK and then opens a browser window to select the file.

  I don't know which file I'm supposed to select here.  I searched online for an answer, and someone told him to go to the computer manufacturer's website and download the driver for RAID controller.  I tried to go to the site of the bridge to find it, but it doesn't seem to be one for Vista 64-bit.

  Please please help!  I have to at least be able to extract the files to the hard drive before reinstalling windows.

  Hello

  ·        Have you Configure RAID on the system?

  If you have not configured then RAID on the system, I suggest you to disable the RAID/eSATA (SATA improved) in the BIOS. Once you turn off the RAID/eSATA on the system that your basic hard disk should be recognized by the system because it doesn't require any drivers, it will act as an IDE. Once you have disabled the RAID/eSATA then booting into the recovery environment and build the Bootrec and check if the problem is resolved. I suggest you follow the steps mentioned below to rebuild the bootrec.

  Rebuild the BCD store by using the Bootrec.exe tool in the Windows recovery environment. To do this, follow these steps:

  a. get the Vista installation DVD and pop in your drive.

  b. then restart your computer.

  c. press a key when you are prompted.

  d. Select a language, a time, a currency, and a keyboard or another input method, and then hitNext

  e. click on repair your computer

  f. click the operating system you want to repair, and then click Next

  g. in the System Recovery Options dialog box, click command prompt

  h. type bootrec /rebuildbcd and then press the Enter"" key.

  ·        If Bootrec runs successfully, it will present you with the installation of a Windows directory path. To add the entry in the BCD store, type Yes. A confirmation message appears that indicates the entry has been added successfully.

  ·        If Bootrec cannot findany lack of facilities of Windows, you must remove the BCD store, and then you must re-create it. To do this, type the following commands in the order shown below: (remember to press ENTER after each command)
  bcdedit/export C:\BCD_Backup
  Ren c:\boot\bcd BCD.old
  Bootrec /rebuildbcd

  i. restart the computer.

  For more information, see the article mentioned below.

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it.

  * Original title: reinstalling Windows Vista

  I tried to format the C drive and then reinstall Windows Vista using the windows reinstall disk but I couldn't start in it. I restarted my computer, press the F12 key and selected boot from cd/dvd, but the computer still started in windows. My computer is Dell. If there is no solution, it is possible to reinstall windows without using the disc?

  Hello

  Here are the options of relocation:

  How ro reinstall from the Dell recovery partition:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

  Reinstalling the printer Dell supplied disk:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

  ______________________________________________

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• where to find windows vista 32 bit OEM Toshiba Portege laptop

  I need the OEM version of windows Vista 32 bit for Toshiba Portege M750 - 10G.

  Hello

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  With a Toshiba, you press 0 (zero) to start to start the ro process of factory of the recovery Partition recovery.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• network Realtek 8900 8968/8111 adapter gives me an error code 10 in windows vista 64-bit

  I just reinstall a new copy of windows vista 64-bit on my laptop after 3 monts of waiting to get my hard drive. After installing windows (is there NOTHING else on the hard drive) is an error that says, basically, that the adapter will not start. I have uninstalled the driver and tried to upgrade to the latest version of the software and it doesn't help, either. It is a Pavilion dv7, moreover, and I went to the hp site. Thay no longer even support this model of laptop.

  Hello Christopher Lewandowski,.

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description, it seems that you are having problems with the network adapter not starting not not by error code 10.

  Proceed as from the link below and check.

  Network adapter problems

  Meet us if you encounter problems with the NIC or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• I want to reinstall Windows Vista, but I do not have a disk when I bought the laptop; I don't have product key, however; What should I do?

  My old laptop is now very slow performance, no doubt because it is hopelessly cluttered with unwanted stuff, viruses etc.. So I have tried various methods of cleaning without success, I decided to reformat (all data on it has been transferred to a new laptop) and start from scratch by reinstalling Windows Vista Home (installed when I bought it). But no installation disc has been delivered, although the product no key. is located on the underside of the laptop. What should I do? I could ring you, but I don't have a land line, and a long call on my cell phone would probably cost a fortune. It would be great if you were ringing me to talk me through the process (07760 101610)

  Greetings - Graham Durbin

  Hello

  Sorry, this is not Microsoft and we don't do phone calls that we are for the most part, Windows users help each other here...

  Here are the different ways that you can reinstall Vista.

  See which is more easy for you.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.