Reinstalling DirectX 9 problem

Similar Questions

• Error - Rome: Total War did not find DirectX 9, which is required for the game to run. Please reinstall DirectX.

  Original title: problems running Vista on Bootcamp DirectX.

  I have browsed the web for the last little while and cannot find any solution.

  I am trying to run Rome Total War on Vista, on bootcamp on my iMac 27 ". However, every time I start the game is active an error message saying "Rome: Total War has not find DirectX 9, which is required for the game to run." Please reinstall DirectX.

  I've been searching the net and have used some DirectX downloads (9) on several trusted sites, but the error message always everytime that I try to run the game.

  I have 'Run' 'dxdiag' and on the 'system' tab is says I have DirectX 11, section 'Information System '.

  I do not know where to go from here, any help would be greatly appreciated

  Have you installed this installation?

• I can't remove the thunderbird to my computer. Whenever I do and try to reinstall the old problems developed again. I already formatted the computer... what to do

  I can't remove the thunderbird to my computer. Whenever I do and try to reinstall the old problems developed again. I already formatted the computer... what to do

  But what was your question? virus? most of the time its not even located in thunderbirds dirctories. Then it reappears.

• DirectX / 3d problem acceleration

  Hello.

  I just installed the 64-bit Windows 7 RC and it works without problems. But when I tried to run the Command & Conquer: Tiberium wars, I've faced the following error (roughly speaking, quoting from memory, but you get the idea. If all goes well...) : "cannot detect Directx 9.0. Please make sure that you have installed. I had a similar problem with Neverwinter Nights 2. The error message was (even once about) "could not detect hardware acceleration.

  I installed the latest drivers (Catalyst 9.5 for Windows 7 64-bit) and information system shows material correctly and in dxdiag, my version of directx is DX 11. I have two 4850 s ATI HD crossfirex. If everything seems to be fine.

  I also tried to run in administrator mode and compatibility mode (does not solve the problem).

  If no additional information is required I'll provide (I'll have the exact error messages later today). Later today, I will try to reinstall the drivers and see if that helps.

  Any help is appreciated. Thank you.

  Hi SampoS,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is due to a problem with advanced user and would be better suited to the Windows 7 Technet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro?ITPID=sprblog

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DirectX 11 problem

  I've always had problems with DirectX 11 when playing games (Crysis 2, ACIII) and have always used DX9 or 10 (which works fine).  I ran the benchmark Heaven and produced the two images at the end.  Do you have any idea what it would cause (or even what I would call the question so I can look for it online)?

  The question is interlaced squares (like a checkerboard) of the normal scene and black.  Dark jitters autour squares 'bad '.  At first I thought it might be a matter of shader because places were evenly distributed throughout the entire viewing area, but maybe his problem with textures as the various elements of the scene are not the problem.

  Image links:

  http://PostImage.org/image/6xnwjmf7t/1ab07697/

  http://PostImage.org/image/8czl2dy0v/dc0e6a79/

  http://PostImage.org/image/473n069qn/ebac6f40/

  Video link:

  http://youtu.be/O7DyLWzV-GM

  I'm running Win7 x 64 and DxDiag has no problem.  I downloaded DirectX Setup, and it complements very well.  I tried to install the DirectX SDK and it fails without any useful error.  Normally I just to uninstall DirectX and reinstall, but yall it baked into the OS :(

  ------------------------------------------------------------------------------------------------------------------

  System Specs:

  Operating system: Windows 7 Ultimate 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130104) - 1431
  Processor: AMD Athlon (TM) II X 4 955 processor (4 CPUs), ~3.2GHz
  Memory: RAM 8192MB
  DirectX version: DirectX 11
  DX setup parameters: not found
  DxDiag Version: 6.01.7601.17514 32 bit Unicode
  Card name: ATI Radeon HD 5800 series
  Manufacturer: Advanced Micro Devices, Inc.
  Track type: processor AMD Radeon Graphics (0 x 6899)
  DAC type: DAC (400 MHz) internal
  Memory display: 755 MB
  Dedicated memory: 1012 MB
  Shared memory: 3839 MB
  Current mode: 1920 x 1080 (32 bit) (60 Hz)
  Output type: HDMI
  The driver file version: 8.17.0010.1172 (English)
  Driver version: 9.12.0.0
  DDI version: 11
  D3d9 Overlay: Unsupported
  DXVA-HD: not supported
  DDraw status: enabled
  D3D status: enabled
  AGP status: enabled

  Driver package version: 9.012 - 121219 a-152192C-ATI
  Catalyst Version: 13.1
  Supplier: Advanced Micro Devices, Inc.
  The 2D driver version: 8.01.01.1278
  Direct3D Version: 9.14.10.0945
  OpenGL Version: 6.14.10.12002

  • Graphics card: SAPPHIRE Radeon HD 5850
  • Motherboard: ASUS Crosshair IV Formula
  • Power supply: Antec TruePower 750W
  • RAM: 2GBx2 Ballistix 2 x (total 8 gigs)
  • Processor: AMD Phenom II X 4 955

  Nothing is Overclocked.  No error in DxDiag.

  "remarkable search-fu."

  lol - I do not visit the ATI forum much immediately. I am only using an ATI card for three months.
  Especially here and Nvidia. Just a coincidence that I stopped there earlier.
  Jose my first ATI card in about six/seven years (HD7970). I went to Nvidia after a borked 1950XT, but not only because of this. More that Nvidia had the good card at the right price at the time.
  I was going to get a 5850 on a new machine + two years back, but when I was shopping there was a shortage of big two mfg gpu so I had to settle on the least - GTX260.
  This machine - Phenom II 965, now has a GTX560ti.

  "I'll have to spring for a new card."
  With the games you are looking to play in my opinion - Yes.
  Not necessarily because of pixelation.  I don't think that that should normally be the case
  just because of the additional constraint of the use of DX11, but due to the overall requirements of the games
  you play, assuming you like max eye candy.
  5850 ability to use DX11 would not always result in the ability to push everything,
  and the latest maps are a good step upward. Use less energy and create less heat too.

  Apparently, you can get the new key Bioshock and 3 Crysis with ATI and Nvidia more in the USA.
  No luck here in the 'chance', no, (Oz) - low countries!
  .

• DirectX 11 problems, please Help! :)

  Hey there,

  So I bought Total War: Shogun 2 on steam and downloaded the game... When I try to play the game I get the 'First time Installation' habit that steam works for any game, but when it comes to "installation of directx for windows" it crashed my laptop. After a hard reset it now always said the same thing when I try to run the game. When I run the install, but press cancel, it will pick up my system. When I go out to start the installation, it will sit for 5-10 minutes before closing the window itself, until the installation is complete. I tried using the web installer so the update of directx 11, both directions manual extraction method lead me to the message "internal error." I'll post the Directx and DXError logs at the end. I know for a fact Shogun 2 will support directx 11 as I played the game earlier on this laptop, but I ended up doing a restore of the system on my system. This becomes increasingly more aggravating that I'm trying to fix it and none of the forum posts I found here or elsewhere on the web helped me, so im hoping that someone who reads this can. Errors in the log file are as follows:
  DirectX.log
  16/12/12 23:20:08: dxupdate: ExecuteInf(): SetupInstallFromInfSection() failed, error = 1117.

  [16/12/12 23:20:08: dxupdate: ExecuteInf(): cannot install C:\Users\Walsh\AppData\Local\Temp\DX12D4.tmp\D3DX9_37_x86.inf:[x64_install]. The file is possibly corrupted.

  16/12/12 23:20:08: dxupdate: DirectXUpdateInstallPlugIn(): ExecuteInf() failed.

  16/12/12 23:20:08: dsetup32: CSetup::InstallPlugIn(): DirectXUpdateInstallPlugIn() failed.

  16/12/12 23:20:08: dsetup32: CSetup::SetupForDirectX(): InstallPlugIn() failed.

  16/12/12 23:20:08: dsetup32: launch the finalization: phase: 255-255, total: 0-191

  16/12/12 23:20:08: DXSetup: DSetupCallback(): Phase = 3, steps = 0

  16/12/12 23:20:08: dsetup32: Installation ended with the value-9 = internal or error not supported
  DXError.log
  --------------------

  [16/12/12 23:20:08] module: dxupdate (Mar 30 2011), file: dxupdate.cpp, line: 5871, function: DirectXUpdateInstallPlugIn

  ExecuteInf() failed.

  --------------------

  [16/12/12 23:20:08] module: dsetup32 (Mar 30 2011), file: dxupdate.cpp, line: 280, function: CSetup::InstallPlugIn

  DirectXUpdateInstallPlugIn() failed.

  --------------------

  [16/12/12 23:20:08] module: dsetup32 (Mar 30 2011), file: setup.cpp, line: 1727, function: CSetup::SetupForDirectX

  InstallPlugIn() failed.
  Any help would be appreciated! :)
  Thanks in advance,
  Sean.

  My understanding is Total War: Shogun 2 need a patch to run DX11, then you have to get the game installed first.

  I would first uninstall the game, or that the installation had apparently not finished, delete all files that have been installed, including those that may be in your - user-folders My Documents or User\ App Data (it may not be here if the game has finished installing).

  To have to do a hard reset can often cause problems if you do not restart from the menu start after Windows loads again. Restart via the start menu is recommended after uninstall or make changes to the system in all cases.

  Once the game is completely uninstalled to run the Web Direct X installation program or, as there may be a corrupted the DX file, run the Direct X Redistrubitable (June 2010) again because this will overwrite all of the Direct X files (Web Installer does not overwrite existing files). If there is still a problem safe mode installation-
  Press F8 (with most systems) during startup to access boot options.
  While you mentioned using the two options of installation/update DX I'll let links anyway, for others
  who can read it.

  Download details: DirectX end-user performance

  Download details - Microsoft Download Center - DirectX Redist (June 2010)

  Once the DX is sorted reinstall the game, but if it gives an option to install DX
  do not let the game to install DX-
  The error mentions a specific file - "D3DX9_37_x86.inf: [x64_install]." The file may be damaged. »
  Assuming that it is in the installer of the DX of games, it seems that the installer is corrupt (or the disc is scratched, etc.), so if you cannot stop the game to try to install DirectX you are between a rock...

  .

• cursor flashing; script tries to run in the background; reinstalled Firefox, still problem

  blinking cursor and slow/unusable super search. window opens that a script tries to run, but can not. Completely remove the Firefox and reinstalled. Problem still exists. Another search engine is not serious.

  Hello jfrancis0525, a reinstall won't help in most cases - please try resetting firefox and see if that can solve the problem...

• HP530: operating system reinstalled, still have problems with updates

  Reinstalled Vista32 OS, on the advice of tech, to 'cure' MS update problems. Use recovery discs. (Recovery partition could not be installed for unknown reason) After reinstall MS update still has problems. Any help would be appreciated.

  After the reinstallation, an update was successful, and then Update Agent failed to update. A number of updates failed (? 10?) and a number have succeeded. Then a small model, only 1.9 MB, Service Pack 1 installed, and then after that check Udates runs, it calls to reinstall Service Pack 1. Again and again and again.

  Thank you, volunteers.

  Hello:

  See if you install the SP1 and SP2 standalone files gets you going to...

  You must install SP1 before installing SP2.

  SP1:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30

  SP2:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16468

• Trying to play GTA 4: EFLC ERROR FATAL: cannot create the rendering target depth check that your card meets or exceeds the minimum required. You can also try reinstalling Directx or the last video driver.

  original title: my laptop cannot run some games like gta iv, I don't know what the problem is I don't know it's dierctx or vga card problem down here my info from the computer if you need, please help :)

  Time of this report: 09-15-2010, 03:03:30
  Computer name:
  Operating system: Windows 7 Professional 64 - bit (6.1, Build 7600) (7600.win7_gdr.100618 - 1621)
  Language: English (regional setting: English)
  System manufacturer: TOSHIBA
  System model: Satellite A305
  BIOS: InsydeH2O Version 2.20
  Processor: Intel (r) Core (TM) 2 Duo CPU P7350 @ 2.00 GHz (2 CPUs), ~2.0GHz
  Memory: 4096 MB RAM
  Available OS memory: 3964MB RAM
  Page file: 1673MB used, 8288 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found<---- what="" is="" that="">
  User DPI setting: 96 DPI (100%)
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7600.16385 64 bit Unicode

  ------------
  DxDiag Notes
  ------------
  Display 1 tab: No problems found.
  Sound tab 1: No problems found.
  2 Audio tab: No problems found.
  Input tab: no problems found.

  --------------------
  DirectX Debug levels
  --------------------
  Direct3D: 1/4 (detail)
  DirectDraw: 1/4 (detail)
  DirectInput: 0/5 (retail)
  DirectMusic: 0/5 (retail)
  DirectPlay: 0/9 (detail)
  DirectSound: 0/5 (retail)
  DirectShow: 0/6 (detail)

  ---------------
  Display devices
  ---------------
  Name of the card: Mobile Intel (r) 4 Series Express Chipset Family
  Manufacturer: Intel Corporation
  Chip type: Mobile Intel (r) 4 Series Express Chipset Family
  DAC type: internal
  The device key: Enum\PCI\VEN_8086 & DEV_2A42 & SUBSYS_FF1E1179 & REV_07
  Memory display: 1759 MB
  Dedicated memory: 128 MB
  Shared memory: 1631 MB
  Current mode: 1280 x 800 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: LP154WX4-TLC8
  Monitor ID: LPL0120
  Native mode: 1280 x 800 (p) (59,976 Hz)
  Output type: internal
  Driver name: igdumd64.dll, igd10umd64.dll, igdumdx32 igd10umd32
  The driver file version: 8.15.0010.1883 (English)
  Driver version: 8.15.10.1883
  DDI version: 10
  : Model WDDM 1.1 driver
  Driver attributes: Final retail
  Driver Date/size: 2009-08-27 08:07:12, 5616640 bytes
  Would be WHQL logo: Yes
  Date stamp WHQL:
  The instrument identifier: {D7B78E66-6902-11CF-9275-14DFA7C2C535}
  Vendor ID: 0 x 8086
  Device ID: 0x2A42
  SubSys ID: 0xFF1E1179
  Revision ID: 0 x 0007
  Strong name of the driver: oem29.inf:Intel. Mfg.NTamd64:iCNT0:8.15.10.1883:pci\ven_8086&dev_2a42&subsys_ff1e1179
  The driver rating: 00E60001
  Video Accel: ModeMPEG2_A ModeMPEG2_C ModeWMV9_B ModeWMV9_C ModeVC1_B ModeVC1_C
  Deinterlace caps: {BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch VideoProcess_AlphaBlend
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
  {BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (UYVY, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (UYVY, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch VideoProcess_AlphaBlend
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (UYVY, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
  {BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (YV12, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YV12, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch VideoProcess_AlphaBlend
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YV12, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
  {BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (NV12, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch VideoProcess_AlphaBlend
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
  {BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (IMC1, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (IMC1, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch VideoProcess_AlphaBlend
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (IMC1, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
  {BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (IMC2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (IMC2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch VideoProcess_AlphaBlend
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (IMC2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
  {BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: caps Frames(Prev/Fwd/Back) = (0,0,1) Format (In/Out) = (IMC3, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (IMC3, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch VideoProcess_AlphaBlend
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (IMC3, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
  {BF752EF6-8CC4-457A-BE1B-08BD1CAEEE9F}: caps Frames(Prev/Fwd/Back) = (0,0,1) Format (In/Out) = (IMC4, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend DeinterlaceTech_EdgeFiltering
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (IMC4, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch VideoProcess_AlphaBlend
  {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (IMC4, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY VideoProcess_AlphaBlend
  D3d9 Overlay: support
  DXVA-HD: support
  DDraw status: enabled
  D3D status: enabled
  AGP status: enabled

  ---------------------

• Offset of DirectX 10 problem mouse

  Hi, I am running Windows 7 Home Premium 64-bit edition. I have an Intel i7 940, 12 GB of ram and a 250 of nvdidia graphics card. My problem with DirectX 10 games running. When I run a game like Crysis for example. my mouse is actually down and to the right of the where the cursor indicates that it is. Thus, for example, if I want to select the first item in a menu, I need to get my mouse down about an inch and a half inch to the right of the menu button. If I play in mode resolution 800 x 600, then my cursor and the actual location of my mouse are synchronized. If I play at a higher resolution then the lag gradually gets worse until I can choose is more options on the screen. If I start the game in DirectX 9, the problem of the mouse will not occur. If I tell windows to set my Visual settings to "best performance" then everything works normally even in DirectX 10. I understand that aero or transparency is what is confusing things, but is there an any fix for this? I'd really rather not change my windows settings each time I want to play a DX10 game.

  Hello
   
   
  Perform the two methods listed below and check if that helps get the pointer of the mouse in sync.
   
  Method 1.
  Try to synchronize the computer with the resolutionof the game resolution. It should solve the problem. For example, if you are gambling 1078 * 768 change the resolution of the computer to the same and check.
  
  Change your screen resolution
  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution
  Method 2.
  Change hardware acceleration
  You can also try to change the acceperation of material in the middle and check (you can try different)
  1. right click on an empty space on the desktop.
  2. go in the resolution of the screen.
  3. click on advanced settings, then click on the tab "troubleshooting."
  4. set the hardware acceleration in the middle. (here you will get the option only if your video card supports).
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• DirectX 9 problem, 64-bit.

  original title: directx 9, 64 - bit problem.

  Hi maleris1234,

  Follow these methods.

  Method 1: Follow the steps in the article.

  How to download and install DirectX

  http://support.Microsoft.com/kb/179113

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Perform a disk cleanup to remove unwanted files.

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

• Encoder mistakingly uninstalled then reinstalled have had problems.

  How can you get your sound to stop sticking.  Mistakingly, I uninstalled my Encoder then reinstalled and have these problems. I even check service in administrater pls help.

  Hello

  I suggest you try to restore the computer to an earlier date and check if it helps:

  http://support.Microsoft.com/kb/306084

  It will be useful.

• reinstall with Vista problem

  I tried to reinstall Windows Vista once a virus has infected my computer then I used a reinstallation disc sent with the computer. He told me that there was not enough space for the installation, so I formatted the single Partition that was available and it still won't let me reinstall and now I can't start from the bios, I only can boot from the cd - dvd drive. Why is it not let me reinstall Vista?

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• I recently installed Microsoft 2010. When I go in there, it will not work & continues to send me a message saying that I might have to uninstall & reinstall because of problems encounterd with the license. Why?

  I installed Microsoft Office Home and Student 2010 on my computer Toshiba with Microsoft Windows and the first time I did it it went well through and Microsoft Click & Run and 2010 have been in my programs, but when I went to use my Windows program it came with a messeage of error that says:

  "Auto Correct File\MSO 1033.Add, could not be saved. The file may be read-only or may not be allowed to edit the file.    Then there is a box to check (OK) so I checked the box (OK) to see what happens & it looks like you're actually in Microsoft Office 2010, but once you go there comes another error message saying this:

  "Microsoft Office has encountered problems with the license and may have to close. If the problem persists, uninstall & reinstall your product.  Then, there is another box to check (OK) so I clicked on the box and then it stops and goes completely and so if you repeat this process did the same thing again and again.

  So I uinstalled just as he said and I've now done four times and still I get the same thing again and again. I also have can not uninstall Microsoft Click & Run when I try to uninstall it from my programs, it says contact Mircrosoft that I am unable to uninstall the package of Microsofts.  I'm the administrator of this computer and thought, I could uninstall and reinstall anything?

  Can someone figure this or help me?

  For Microsoft Office 2010 problems, please repost on his own forum:
  http://answers.Microsoft.com/en-us/Office/Forum/office_2010?page=1&tab=no

  This tutorial allows you to uninstall the version 2010.
  http://support.Microsoft.com/kb/290301
  There are 3 Fix It button, 2003, 2007 and 2010.
  Make sure you choose the right version button.

• DirectX 11 problems when you try to play some computer games - need to replace it with an older version?

  Running Win7 x 64 home.

  I have multiple problems of game about Dx11.
  EverQuest Games Inc., World of Warcraft, Doom3, Farcry, Alien Vs Predator 2 (former), Counterstrike and a crowd of older games!
  I read the other messages and responses (those who responded, I noticed a large number of messages without response on this topic too)
  All the responses suggest that it is a hardware problem or win7 compatibility... This isn't the case, I know exactly what the question! its Dx11 causing these problems!
  With respect, that I don't have 20 questions about what errors im getting, im of hardware running, which grows with the im... They ALL find out 100%, all I want to do is go back to an older version of directx 9 c preference!
  I know that this is the problem I checked the logs of the accident and took notes, errors, and they are the same for the same problem, I got on a Vista machine, which resolved when I restored to before the service pack!
  I tried to use the web installer in accordance with another similar position and it will not be installed because I get the message "you have a newer version already installed etc.."
  I also tried to change the compatibility to the game settings but this obviously does not work either because he still uses Dx11.

  ----------------